My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Fastdial does not work after installing version 7.0.1

Fastdial does not work after installing version 7.0.1

'''this will fix your problem with FF 7.01 '''
'''http://dl.dropbox.com/u/10199236/fast_dial-3.5.1-fx-modified.xpi '''
'''''This link will fix Fast Dial for Firefox 8.0.1'''''
'''http://dl-web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-fx.xpi '''

Mp600r does not work after installing mavericks 10.9 what do I do now ?

Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

This thread should help:
https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

My sound system is not working after my last updates on my imac,what shall i do to get fixed?

Hello any body who can help me out here?
My sound system is not working on my imac after the last updates,
WHAT SHALL I DO FOR????

apollos211,
You marked this as solved, so chances are no one else will respond.
You can try going Applications>utilities>audio MIDI set up, output tab and check to see if built in is selected.
Also check in system preferences>sound >output and see what is selected there.
If you look in the headphone port and see a red light (this means it is in digital mode), try taking a set off headphones and plugging them in and out several times also wiggle them around gently. There is a micro switch that sometimes gets stuck.
Hope this helps, if still no joy try reposting so that more contributers might check it, as once checked as solved it reduces the number of people checking.
All the best

Flash Player Does Not Work After Installing on Windows XP

I had been playing a shockwave game for several days and had completed 19 of 35 levels. When I went to play it again, I received a message that I need to update to a newer flash player. I downloaded it successfully, but it does not work. There is no file size and I uninstalled and reinstalled it several times. I also changed the internet settings as suggested. I am also the administrator of and only user of this computer. I can also play the same game on another computer that has windows 7 and have no problems. I have completed 33 of 35 levels with no problems. The computer with XP has a 32 system.
Any help would be appreciated.

I had been playing a shockwave game for about a week . When I went to play it again, it stated that I need to upgrade to a newer adobe flash player. I have windows xp with a 32 system and explorer 8 browser. After installing the flash player, it has no file siz for the player.. After I installed it, the page says it had been installed. The game still says I need to upgrade the flash player. I uninstalled it, reinstalled it, changed my internet settings as suggested, and it still does not work. I can play the same game on my other computer with windows 7 with no problems. It has a file size listed for the flash player. The computer that I am using now has windows 7 and a file size for the adobe flash player.
Any help with this matter will be greatly appreciated.
Ernestine W. Washington

Wireless net does not work after installing SP1 for Vista - Error code 10

After installing Vista SP1 on my computer (T61 - Vista Business 32 bit) my intel 82566mm wireless net does not work.
Windows says "Error code 10" and suggests that I update the driver. I have downloaded the newest driver via another computer, but it does not help. Still error code 10.
Any one else has the same problem?

I fixed the problem. Uninstall iTunes and then reinstall it clean. Looks like upgrading is problematic.

Satellite U400-17R - Sound device is not working after installing XP

Hi there,
I purchased a U400-17R Model with Vista Home. i Formatted it and installed Windows XP Professional downloading the XP drivers from Toshiba site.
Everything works but my Sound Device is not working. when i check in the Device Manager the Sound Drivers are there and it says working properly.
I am Lost...Can anyone please help?

Hi!
On Windows XP you have to install two patches from the Microsoft Knowledge Base for high definition audio cards. If you only have SP1 or SP2 you need the patches but if you have SP3 you dont need it because they are a part of SP3.
Both patches or SP3 must be installed *first* and then the sound driver. So if you have installed the sound driver first you must remove it and then install the patches again. After this it should work with the sound:
http://support.microsoft.com/kb/835221
http://support.microsoft.com/kb/888111
Bye

Iwork does not work (after install)

Installed iwork from purchased dvd.
Clicked on Pages (same thing happens with Keynote or Numbers)
Box comes up:
This application pages quit unexpectedly. Click to relaunch(does not work) Ignore (does not work) or report.
I click on report and get this:
Process:         Pages [694]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         ??? (???)
Build Info:      Pages-7660000~4
Code Type:       PPC (Native)
Parent Process: launchd [109]
Interval Since Last Report:          189 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report:   1
Date/Time:       2011-05-28 20:59:59.872 -0700
OS Version:      Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 089DD08E-48A6-4CBB-8A7C-E4A7BF743203
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @rpath/Inventor.framework/Versions/C/Inventor
Referenced from: /Library/Application Support/iWork '09/Frameworks/SFCompatibility.framework/Versions/A/SFCompatibility
Reason: image not found
So I spent 89.00 canadian to buy a program that has no clue. Hurray for me.

https://discussions.apple.com/message/13059252#13059252
Basically, the flagged correct answer in that thread seems to involve doing the following and then reinstalling:
(My suggestion would be to create a folder on the desktop as a temporary residence for the following files and folders to mode).
In your home directory, remove iWork plist files from /Users/your_account_name/Library/Preferences folder, which would be for the iWork applications.
Move the folder /Library/Application Support/iWork '09 to the temp folder you created.
Move the folder /Applications/iWork '09 to the temp folder.
Reinstall the program. Something got hosed in the installer the first time around (it happens). It worked for the OP in the linked discussion.

Wireless Works during install.... Does not work after install.

Hiya!
I just finally finished semi-installing from live. it's exciting. I'm stuck at cli trying to get wireless to work.
it's really weird. First- I only have wireless (it's from my downstairs neighbors). I used it DURING the install process- downloaded all of the packages, etc etc.
But when I start up my computer, I get a [FAIL] by network (it does not start up). However, if i # ifconfig wlan0 up, the wireless turns on.
iwconfig does not work
and I cannot scan for networks...
During install, I was able to see the names of every network.
There isn't any sort of password for the router I would like to connect to (and connected to before); it's just a linksys.
My wireless card is intel 5300 and I'm almost certain I installed the 5000 driver package.
Thoughts?
Perhaps I should go to sleeeeeeep..
IT"S JUST SO ADDICTING

zee wrote:IT"S JUST SO ADDICTING
You've just been sucked into the world of Arch Linux! Watch as your skin becomes pale, your eyes turn square and you suddenly feel compelled to run "pacman -Syu" every 10 minutes
Must...... keep....... up...... to......date....

Iphoto 9.2.3 does not work after instal Mavericks

I had Snow Leopard on my imac and used iphoto 9.2.3 and i upgrade free totMavericks, version 10.9
After the upgrade to Mavericks iphoto does not working
It is not supported by Mavericks.
How can i get back my program iPhoto ( 9.2.3) in Mavericks?
Thank you for an ( good) answer.

Go to the App Store and upgrade it to the current version.

Icloud backup does not work after installing ios7

I installed ios7 and now my icloud backup does not work. When I connect to iTunes i can back up my phone on my computer, but when I change the option to icloud it gives me an error message. Please help

Please, provide some details. May be some configuration is reseted, password? What error do You see?

Wi fi does not work after installing ios7

when i installed ios7 , my wi fi does not work .
plese help my what can i do ?

Please, provide some details. May be some configuration is reseted, password? What error do You see?

Time Machine does not work after installing mavericks

After I installed maverick on my imac, my time machine backups don't work anymore!!!!
I have a normal portable HDD attached to my Imac with time capsule backup from before mavericks was installed.
I also has a Buffalo NAS as a second Time Machine Backup.
TIme capsule does not recognise my Buffalo NAS and tells me that it is not available. It has previous backups from Mountain Lion for sure!
My portable HDD keeps saying "Preparing for backup" for eternity.
Please, APPLE, what is going on with mavericks? Regretted upgrading.
My backup is 31 days behind because of this! Unacceptable!
But what is strange is that I can connect to my portable HDD and Buffalo NAS as a drive. What I have been doing is to copy and paste the important stuff into the drives. But it really defeats the purpose of time machine, right?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Call Of Duty LAN Servers does not work after installing Mavericks on my Mac Air, I need help!

Hey everyone, I have some troubles making LAN servers on Call of Duty 4 and people can't join them after installing Mavericks on my Macbook Air. I need help!
Thx!

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My DotNet application does not work after installing Framework 4.0 on My client PC

HI
I created application in Visual 2010 therefore I need framework 4.0 to work my application on client PC but it is still not working.
I have few forms in my application.
Form contact has controls Textbox, labels, button on it. (This form works fine absolutely )
Form Invoice has DatagridView, textbox, label,button . (This form is NOT working at all, give me an error)
Any bright suggestion will help me to NOT install whole carp of visual studio 2010 on my client pc and also save Space.
Thank you in advance

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My sound system does not work AFTER installing pc to tv wireless connection

Similar Messages

Maybe you are looking for