My spot healing tool gets stuck and freezes and won't keep up with the curser. I'm using LR4.

Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

Similar Messages

ITunes sync getting stuck on "waiting for changes to be applied" with the latest iTunes 11.4.0.18 and ipad2

Downgraded to ios 7.1.2 after ios 8 disaster. Now iTunes 11.0.4.18 and windows 7 and my ipad2 will not sync. I received an error message that the sync failed to finish. I have lost all my apps I think but that is another problem. Why won't my pad sync?

iamkurtvella wrote:
Anyone having this same problem? I need my iPad to sync! efclvkjhbsdfvlkj
Yes, my iPhone 5 running ios 7 will not sync in *any* way with itunes now. I can neither add nor remove content via itunes. I just tried to delete 100% of my music from my iphone, it hung forever on "Waiting for changes to be applied" and then when it was finally done... no changes had been applied.
I can't add, remove, change, delete or in any way of any kind sync my iphone with itunes any longer.
I'm becoming the person who refuses to update to the new Apple OS. I used to get very excited about new OS updates. That all ended around Mountain Lion. Yesterday when I saw that Mavericks was out I wasn't excited. Instead I felt a sense of dread, and for good reason. Every time they release an OS in the last few years it's just a cluster-F.

Iphoto 08 image corruption- Spot heal tool

I have retouched a batch of tiff photos using the Spot healing tool. I was perfectly happy with the quality of the edit as i saved them. On reopening the images later i noticed that there are blurred/distorted marks all over the images. I can revert to the original images and undo all corruptions, including retouch edits. Again i have retouched the images and again the same problem occurs.
Any suggestions would be appreciated.

hannick:
Make sure you're running the latest Quicktime version. Also run Disk Utility and verify your HD. If repairs are indicated you'll need to boot into the system install disk and run Disk Utility from the Utilities menu.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Spot Healing tool in Elements 9 causes program crash

I have installed Photoshop Elements 9 on a computer running Windows 7 Professional. Installation was unevenful, and the program runs without problem until the spot healing tool is selected. Clicking over an image imperfection causes a dark circle to appear, then the whole screen goes pale, the 'busy' circle appears and everything stops. Machine operation can only be recovered by closing the application.
I have re-installed twice and the same thing happens each time.
I cannot find any other problems.
I'm reluctant to pay for this product until it works!

" it really looks as if the spot healing tool is defective."
Same problem here, Windows XP.
Paid application online, downloaded and installed program, started up and everything is working properly UNTIL
content aware function is accessed.
Program terminates by itself and reports and error to Microsoft.
Anyone knows a solution to this problem?
In search of a solution I found this thread.....

Computer crashing when using Spot Healing Tool ~ PSE9

Why does my computer "Crash" when I use the "Spot Healing" tool. While using the "Guided" edit for "Perfect Portait" every other tool works just fine, but when I go to do the "Spot Healing" it crashes. Weather I am in the "Guided" edit or to use it on it's own. This is my 1st attempt using PSE 9 and this feature. HELP!!

Try clicking on the drop down icon under the word file - then choose reset all tools.

Spot Healing Tool???

I hope someone can answer my question.....
I downloaded a trial version of Adobe Photoshop Elements 6 to use the Spot Healing Tool but that is all I need it for so paying $160 for this product is not an option.
Is there a tool in Iphoto or some other free software for mac I can use for this same purpose, to remove blemishes or scrapes or whatever from faces in pictures?
Thanks
Patrick

I wish there were a way to delete your own posts.....
Once I played around with Iphoto I found the spot healing tool and it worked just as well as photoshop.
Awesome!!!!!!

Spot healing tool bug

I only have one problem with pse9.
When I try to use the spot healing tool, elements crashes every time.
Please help

If your using windows, there is a update available that should fix
the problem 9.01
In the photoshop elements editor, go to Help>Updates to download and
install the 9.01 update.
MTSTUNER

Page get stuck or freezes

Hi,
We have used Captive 2 to built course & publishing it
for SCORM 1.2 for eLearning output.
We have used default loading (100 %) from Captivate movie
while publishing.
Some of the pages get stuck or freezes when we use Captivate
slider when we see launching through LMS(Aspen & Docent). And
once stuck it does not moves ahead. This issue also takes place
even for the course which is run offline as well.
Is there any way to we can run each and every page (using
slider) without freezing it ?
Thanks.
Regards
Chetan

I get this error when accessing your link
https://server.home.private/wiki/pages/M9q7b7H/Certificate_invalid_for_one_site. html
Linc Davis wrote:
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

SPOT HEALING TOOL CRASHES PROGRAM PSE9

Please help. I used to have Elements 7. I finally was able to purchase Elements 9. I installed it and quickly began to use it as I have wedding photos to edit. However, each time I press the "Spot Healing" tool. PSE 9 Crashes. I can use the others just fine so it seems. I need that SPOT HEALING!!! Someone please help me

Make sure you have the correct settings for the task. In the options bar you have three choices: proximity, content aware or texture. Also check the box sample all layers if you are working on more than the background layer.
Otherwise select the tool and try a reset.

I was editing photos and it was getting stuck or frozen and working really slow, so I attempting to close aperture and reopen it but it won't quit aperture and now it won't open up to my photos either. Any ideas?

I was editing photos and it was getting stuck or frozen and working very slowly. I attempted to restart the computer but it would not allow me to quit aperture. Now aperture appears in my toolbar but will not open up so I can work on any photos. Any ideas?

Did you try opening from the Applications folder?
Depending on how far that gets you, I would also take a look at the Troubleshooting Basics.

Latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress

latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress.

Refer to EX11....
Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

TS4522 I am trying to export to Vimeo, have never had a problem, but now it is getting stuck at 8% and failing, and if it goes passed 8% it eventually fails anyway, what should i do???

I am trying to export to Vimeo, have never had a problem, but now it is getting stuck at 8% and failing, and if it goes passed 8% it eventually fails anyway, what should i do???

Try exporting a Master File with settings of Web Hosting and H.264. If it exports successfully, see if a manual upload works.
Russ

HT3606 i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?

i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

When downloading a app it get stucks in "waiting" and it never downloads?

I try to download and app or update a app and it gets stuck in "waiting" and never downloads. Any answers will work so i can get the apps to download.
Thank you

Its not in pause. i double check and the security software setting, is there anyway I can access it from my phone?
my apps setting are
Automatic Downloads
Music ON
Apps ON
Use cellular Data ON

I get a not enough storage message on my computer with the option to close or go to seting but nothing happens when i tap on the screen and it seems to be stuck there.cant even shut it down

I get a not enough storage message on my computer with the option to close or go to seting but nothing happens when i tap on the screen and it seems to be stuck there.cant even shut it down

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My spot healing tool gets stuck and freezes and won't keep up with the curser. I'm using LR4.

Similar Messages

Maybe you are looking for