My storage drive has failed with my itunes libary.

I have an external 360gb sata hard drive ina caddy, it has failed, for ref I actually ordered the same drive again to see if I could swap out the control board and get access to all my data but its gone.
I have quite a bit of stuff on my ipod touch 64gb (its the latest one).
Im just woundering were I stand now, can I import from the ipod to the computer, its not a major major headache if I cant, I have a bunch of apps from the last two months I bought from the apple store.
Whats the best thing to do, wipe the hand held and just start again?

check this post by Zevoneer.
JGG

Similar Messages

I have an ipod classic 6th generation which has a 160gb MK1626GCB HDD in it. This drive has failed so I bought a new one. I don't know how I've managed it but I've ended up with a 160gb MK1634GAL. Can I just get a different ribbon so it fits?

Hello I hope somebody can help. I have an ipod classic 6th generation which has a 160gb MK1626GCB HDD in it. This drive has failed so I bought a new one. I don't know how I've managed it but I've ended up with a 160gb MK1634GAL. The connectors on the hdds are different on the hdd end but look the same on the mb end. Can I just get a different ribbon so it fits? Ive looked for one and have found a couple of different ones and the seem to be specific to the ipod although I cannot find one specific for the 160g. Can anyone shed some light onto this?

Your computer is called an iMac.
Did you turn proxies on? If so, you should turn them off.

27 inch imac's hard drive has failed.

Hi guys my 27 inch imac's hard drive has failed and I need to replace it. it was a seagate 1tb ST31000528AS. Any suggestions what to replace it with.

No worries,
Any SSD should work I recommend either OWC or Crucial SSDs, but you will still need an aftermarket optical drive temp sensor or the software to slow the fans down.
I recommend:
For software: http://exirion.net/ssdfanctrl/
Temperature sensor:http://www.ebay.com/itm/Apple-iMac-21-5-A1311-Mid-2010-Optical-Drive-Temp-Sensor -Cable-922-9624-/151521177860?
You will also need a bracket to mount it on-http://eshop.macsales.com/item/Newer+Technology/ADPTADRV/
iFixit guide: https://www.ifixit.com/Guide/iMac+Intel+27-Inch+EMC+2309+and+2374+Hard+Drive+Rep lacement/1634
You will just need to swap out the HDD bracket with the above one mentioned.
Good Luck
PS: If you are interested in installing it in the 3rd SATA slot or replace the optical drive with an SSD please say so

Optical Drive Has Failed - Can I disable it, what's next?

My 2 year old Mac Mini's optical drive has failed.
I had finished importing a CD and went to eject it and all I heard was grinding and the CD would not come out. I tired everything under the sun to get the disk to eject with nothing working, so I took it to my local Apple Care Center.
Their diagnosis is the optical drive has failed. So now what?
1. They removed the CD, but my Optical Drive is still grinding and it is driving me crazy (the grinding is not continuous, but happens every 8 seconds to 10 seconds)! What can I do, can I somehow disable the Optical Drive so it won't continue grinding? I have reboot several times and nothing seems to satisfy/stop this grinding Optical Drive!
2. I guess I am going to have to buy an external Optical Drive (oh joy, more cash), can anyone tell me about life w/o an internal Optical Drive and using an external optical drive? Any suggestions on which model/features I should look for? ...besides one that uses FireWire, which is a must for me.
3. I have an external hard drive which I use to backup my Mac Mini. Now that I don't have an internal Optical Drive, are there any other safety issues I should be thinking about? How about booting the Mac Mini from a disk when it crashes without an internal Optical Drive?
I am totally frustrated at this point!
Cheers, Paul

Welcome to Apple Discussions!
With no disk in the optical drive, it should be almost entirely inactive (it would be expected to make some noise initially at bootup, but should not be active after that). It makes me wonder if the disk was removed correctly, or whether the drive is still 'latched' and thus 'thinks' a disk is in place. In this situation, I'd return the unit to the Apple Store and ask them to resolve the problem, since a failed drive should not create these symptoms.
For external drives, there are a number of good solutions - see http://eshop.macsales.com/shop/firewire/optical-drives/ for some examples, starting at around $72. There should be no issue with using an external, and indeed, you are likely to find that even the cheapest of those listed provide you with rather faster performance with rather less fussiness about media brands. You are right to want a FW drive, for best performance.
As long as the external optical is connected and powered, and a valid MacOS install disk inserted, there should be no problems booting to it if required - though you may have to hold the Option key down (Alt if you are using a PC keyboard) to get to the boot loader screen, rather than C to boot directly to the optical drive.

Satellite A200 - WebCam issue - webcam drives has failed

Hi,
I need some help regarding the integrated webcam of my Satellite A200.
Everytime I start the laptop I keep receiving a message saying that the webcam drives has failed and I have to restart the computer, but the problem persists.
I have downloaded an updated webcam driver, but nothing.
Can anyone give me an idea of what is going on?
Thanks!

Ok - I've had the same problem:
"Everytime I start the laptop I keep receiving a message saying that the webcam driver has failed to load and I have to restart the computer"
Same when trying to update driver from Toshiba site, same when rolled back / uninstalled drivers, then re-installed default drivers. Nothing worked.
Sorry - but the solution that worked for me wasn't easy.
I had to disassemble the laptop to take a look - fix something else ( wireless on/off switch had broken / jammed in off position - lugs had snapped on back of the slider switch on the case, but no problems, I just left it in "on" position, as wireless can be switched off in software anyway). I decided as I'd got that far already, to pull the laptop completely apart and clean it out properly.
There's a shielded cable running from the webcam in the lid, though to a small white socket on the motherboard, accessible under the keyboard, next to the wireless board.
I was disconnecting various other cables etc, and came across this one disconnected, and couldn't remember disconnecting it myself. Hmmmm...
Anyway, I connected it back up on reassembly, it pushes in to the socket and seems seated, but needs an extra little push to "snap" securely in place.
My guess is that some of these haven't been seated properly ex-factory. They probably work just fine, until perhaps through repeated flex on the back of the keyboard when typing, or opening and closing the lid, the connector falls out of the socket.
Anyway - my webcam works again now. (using Vista SPII and all current updates, but in my case that's not relevant, as it was NOT a software or driver issue).
There's instructions (with pictures) for disassembling the A200 on the net - use google to find them. You don't need to pull it completely apart, just to the point where you can get the keyboard out, then you can access the connector.

I keep getting intel hd driver has failed but has recovered but it is happing more and more

my screen goes black or i loose video and then i get message intel hd driver has failed but been recovered but it is happening more often and sometimes i have to pull battery to reset computer

Hi @msberger ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp that you understand that your screen goes black and you lose your video. You get a message that the Intel Driver has failed but has been recovered.
To assist you more efficiently, it is important to provide your exact model of HP notebook and the Operating System you are running.
Have you ran The HP Support Assistant to aid with HP updates and resolving issues.
Have you tried using the Windows troubleshooter?
If you would like further assistance, please provide your exact model of HP notebook and your Operating System.
How Do I Find My Model Number or Product Number?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

External Hard Drive has failed!! How do I get a copy of my Photos off Apple

My Western Digital external hards drive has failed. None of the data can be recovered. I basically held my music & photo collection. Most off my music is still on my iMac so no problem there. However, I has moved my entire photo collection onto the External Hard Drive. The only way I can recover it is to copy the photos that I (fortunately) copied onto my Apple TV. The question is how Do I do this?
There must be some whizzy piece of software out there that can do the job?

http://www.youtube.com/watch?v=Nc4S2l9neKM

My time machine backup external hard drive has failed. I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it?

My time machine backup external hard drive has failed. I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it

http://pondini.org/TM/21.html

Error in upgrading SharePoint Server 2013 with SP1 : "Task upgradebootstrap has failed with an unknown exception"

I has successfully setup new Dev ENV of SarePoint server 2013 in VMware with 2 servers running om OS: win server 2008 R2 Ent SP1, AD + Central Admin Application Server.
After that the configuration of SharePoint App and WorkFlow Manager completed as well and many projects run perfectly,
And after installing SP1 of SharePoint server 2013, and running the SharePiont Configuration wizard to complete the configuration of the SharePoint Farm the Upgrade has fialed on Step2 with the following Error from the Log file:
Task upgradebootstrap has failed with an unknown exception
01/04/2015 00:43:30 11 ERR Exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown.
at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Also after that I was not able to create like before a new site , and this creating end with error message as follows:
Failed to call GetTypes on assembly Microsoft.Office.TranslationServices, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Method not found: 'Microsoft.Office.Web.Common.ProcessImageInfo.
Is there any solution to my problem with SharePoint server 2013 SP1, this supposed not to cause any bug in stable environment.
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS.

Hi Daniel,
Thanks for replying on my post, actually I have downloaded the kb2880552 sp1 for
enterprise edition from the link
https://support.microsoft.com/kb/2880552 , and this has been experienced with me before since I had my Standalone Dev machine first installation, and the issue only occurred when the SP1 installed though.
Anyway, I've tried to install CU Nov 2013 http://support.microsoft.com/kb/2889944
but still facing the same issue,
I run the Setup of SP2013 from the CD to repair the SharePoint and error message appears,
The issue related to "Microsoft.Office.TranslationServices" is also related to running
the repair successfully which leads to the same error message above.
The Version of SP 2013 from the program file is : 15.0.4571.1502
The Update snapshot is as below:
Is there a problem with my sharepoint media file?
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS.

HT2173 How to know when a hard drive has failed ?

How to know when a hard drive has failed ?

Machine doesn't boot. You experience strange crashes. Gets wrong results. Your harddrive is five or more years old. Time to consider repacing it.   You do have backup?
You may want to run these "standard" fixes if the problem persists.
1) Check the amount of free space on your harddrive. You should have a several gigs free.
2) You should run disk utility
     a) verify the disk
     b) update your permissions.
3) Try a safe boot.
    Shutdown your machine. Hold down the shift key. Poweron. Wait awhile Wait awhile while you harddrive
      is being checked.
    http://support.apple.com/kb/ht1455
4) You may want to run applejack to clean up your machine.
     http://applejack.sourceforge.net/
a lot more ways to fix your Mac.
http://www.thexlab.com/faqs/faqs.html
verify & repair your startup drive
To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
This article will tell you how to get to disk utility. Once in a disk utility, you can go and attempt to recover the disk.
http://support.apple.com/kb/TS1417
To repair your startup drive, you will need to run disk utility from your startup DVD.
Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
http://support.apple.com/kb/HT2055
How to run disk utility from your startup DVD.
Insert your startup DVD into your reader. Power down your machine. Hold down to the c key. Power on your machine. This will bootup your startup DVD.
This will bring you to a panel asking you for your language. Pick your language.
You you come to the Install Mac OS panel. Do not install.
Click on Utilities menu item. This will give you a pulldown list of utilities.
Click on the disk utility.
You are now in disk utility. Pick your disk. Click on repair it should be on the lower right of the panel.
Once the repair completes successfully, you should update your permissions.
Verify a disk
As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
I suggest that you use disk utility to verify that your startup disk is OK.
Macintosh-HD -> Applications -> Utilities -> Disk Utility
Start up disk utility. On the left pane view, you will see a list of all your disks.
Click on your startup disk.
Click on the First Aid Tab.
Click on verify.
Hopefully your disk will verify. If not, you have to boot from your installation DVD and run Disk Utility from there to attempt to repair your file-system.

I used time machine, now my drive has failed and all my files are lost.

i used time machine, now my drive has failed and all my files are lost. any one know how to get the max osx to see the drive again so i can retrive my files

kabb30 wrote:
i used time machine,
Ok, check
now my drive has failed
Which one, the TM drive or the internal boot drive?
all my files are lost.
Where? on both drives or just TM or the internal drive?
any one know how to get the max osx
yea, if we knew more details of your machine and what you had before and later
to see the drive again so i can retrive my files
I don't know what drive failed.
I'm thinking here your internal drive failed? Was it replaced?
You have a blank internal drive and a TimeMachine drive and your asking how to reinstall OS X so you can restore from the TimeMachine drive?
How are you getting here? Another machine or device and what is it?
We need more details of your situation please.

Task Sequence has failed with error code: 0x80070570

I've created task sequence for Windows XP OS Deployment. WinPE boot image loads successfully, Partitions are formatted successfully too. But during "Applying image 1 from volume C:\" I receive following error:
Task Sequence: My_task_sequence_name has failed with error code: 0x80070570.
What I need to do? Any ideas? (My computer has following details: ASUS P5KSE motherboard, Core 2 Duo, SATA HDD, Atheros L1 adapter)

No, a build and capture task sequence automates the build of the image removing any and all human intervention so that rebuilding or refreshing an image becomes a simple matter. Building images by actually manually installing Windows is anti-IT.
File corruption can be caused by many, many things; e.g., anti-virus, physical disk errors, network transmit errors, etc.
Jason | http://myitforum.com/cs2/blogs/jsandys | http://blogs.catapultsystems.com/jsandys/default.aspx | Twitter @JasonSandys

Profile Manager: Service has failed with status 500?

I am getting a "Service has failed with status 500" error when trying to enroll a device with profile manager. Does anyone have a resolution for this?

In OS X Server 2.1.1 there seems to be an error, according to: https://discussions.apple.com/thread/4365626?start=0&tstart=0

I am trying to sync my iphone and it has frozen with the itunes symbol on my phone?

I am trying to sync my iphone and it looks like it has crashed and the itunes symbol is frozen on my screen, I have tried to switch off my phone but it will not work, anyone help?

Your getting that error because one or more of the files you are trying to sync cannot be found. You need to make sure your iTunes library is in fact accessible. This error is common with folks that store their library or parts of their library on an external drive,

I recently restored my computer and now I can not sync my ipod to my computer - the error says "my ipod is synced with anothers itunes libary"

I can not sync my ipod to my computer - the error message says " my ipod is synced with another itnes libary"

Re-installing the OS on your PC has caused your iPod to think it is now syncing with a new/different iTunes library. An iPod can only be synced with one computer/iTunes library at a time. If you try to sync the iPod with a different/new iTunes library it will erase the contents the iPod and replace them with what is in the new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

My storage drive has failed with my itunes libary.

Similar Messages

Maybe you are looking for