My text moves to the wrong place when I apply motion blur!

Hello friends! thanks in advance for any able to solve my problem. when ever I apply motion blur to moving text it repositions the text permanently.... I have to delete the motion blur effect in order to have it text stay on course...any suggestions?

"Delete the motion blur effect"?  Sounds like you are applying an effect, rather than turning on motion blur.
Please provide a detailed explanation of the process that causes the problem.  If possible, post a screengrab as well.
Note that Motion Blur, at its core, does alter the position of animation by blurring the disnace between two moments in time.  When you activate motion blur, it samples the position of your text at multiple points in time to create the illusion of motion blur.  If your text is moving very fast, the results can be surprisingly major.

Similar Messages

  • I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties​, am I looking in the wrong place?

    I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
    I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
    MAX says it recognizes all the cards in the chassiss.

    Jeremy, Thanks for the reply.
    I tried to set up the system as DAQmx.
    I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
    It didn't seem right that the system should behave that way, but I pressed onward.
    I then tried to create a new DAQmx Task
    When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
    Analog>>Voltage
    Analog>>Temperature
    Ana
    log>>Strain
    Analog>>Current
    Analog>>Resistance
    Analog>>Frequency
    Analog>>Custom Voltage with Excitation
    Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
    I had included the system report of what programs I am using, etc. as attached file nireport.txt
    After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
    Which I guess it is since both configurations are now set-up in MAX.
    I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
    't come up with
    Analog input>>POSITION>>LVDT
    When I try to create a new DAQmx task.
    Thanks for the help so far! As you can probably tell I am new at this.
    Ryan
    Attachments:
    nireport.txt ‏2 KB

  • IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball.  I almost think it is looking in the wrong place for the pictures.  How do I redirect it back to the Mac hard drive?

    My iPhoto is not responding.  Whenever I click on the iPhoto icon I get a twirling beachball.  It is as if the machine is looking in the wrong place for the photos.  How can I see where the machine is looking to find out if this is really the problem.  How can I see the path?

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
    If that's the case  Apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • What If The repeat is in the wrong place

    Just want to share my first panic moment...
    This is a stupid question but I like to know the best way to handle this.
    It was my first panic moment because I had never seen this before.
    This weekend I was testing some scripts with a loop (repeat action)
    The script had to make a new text edit document, and some more tasks...
    But I placed the repeat at the wrong place so when running the script...
    I had in no time 300 documents and keep counting... So the repeat was wrong...
    and the script keep running and running.... panic... How do I stop this ?...
    So I force quit text editor. but the script(activate text edit) and keep on running... I had so many files open on top the system almost crashes...
    The only solution I had was shut down..
    And hoping the script doesn't start over...
    ok.. didn't continue... fiew.
    Did some changes and had to run it again... (Hoping that it will work)
    almost ready... one more shut down. (again many files...)
    So after the last changes the script works perfect but I want to know how I do this in the future when testing something like this...
    When A script keep running.
    What is the most elegant way to stop this?
    thanks.

    Command-. is the standard method to stop a process.
    This may not work if your script first sets TextEdit to the active app (via an activate command) because that would send the Command-. to TextEdit, not to the script.
    If that were the case then you would first have to activate the Script Editor (or wherever you ran the script). If the activate command was within the loop then that might silll fail because it would switch back to TextEdit before you had a chance to stop the script.
    If all else fails, Ctrl-click on the Script Editor's icon in the dock and choose 'Quit'. This should send a signal to the app to stop processing (hopefully offering you a chance to save your script). At that point you can quit or not - the script has stopped running which is the main point.
    If that still doesn't work, then you may have to force quit Script Editor, losing any unsaved edits to your script, but it wouldn't be as harsh as a forced shutdown of the whole machine.

  • I have been editing project for two weeks and now I get ghosts of other images fromt eh project coming up in the wrong places even though the thumbnail looks right. Help.

    Help. I have been editing a project for two weeks and now it gets ghosts of ohter images from the project coming up in the wrong places. The thumbnail has the correct image but the image either does not display and its black or an old image or another one shows.

    When I have problems like this I do two things. First I shut down and restart iMovie. Sometimes that rejuggles the date. But I am sure you have been doing that in such a long project.
    The Second thing I do is delete iMovie preferences, which can get corrupted.
    Home-library-preferences-com.apple.imoviepref
    Hugh

  • Pacman looking for pacman.conf in the wrong place?

    When using yaourt, I had been getting an error message to do with pacman.conf not being found. I fixed this by creating my own and saving it in
    /usr/local/etc/pacman.conf
    (it's the only file in /usr/local/etc)
    I then got the error message:
    failed to initialize alpm library (could not find or read directory)
    After some googling and learning about the find command, I found the following files:
    /usr/lib/libalpm.so
    /usr/lib/libalpm.so.8
    /usr/lib/pkgconfig/libalpm.pc
    /usr/lib/libalpm.so.8.0.2
    So I'm guessing that I do have the alpm library, but pacman (or Yaourt?) isn't finding it.
    Further use of 'find' found the following versions of pacman:
    /usr/local/etc/pacman.conf
    /etc/pacman.conf
    Which then lead me to believe that I have the necessary files but they are in the wrong place or there is a config file (or something) that I need to alter.
    Any ideas what I've done wrong and how to correct it?
    Thanks, James

    I've just tried
    pacman -S man-pages
    as a test, and it worked ok.
    So, Bug Wrangler is probably right. Any ideas how I fix it, or is the solution to start again? If I need to start again, is there an easy way to remove yaourt?
    Last edited by james13 (2014-10-05 18:57:00)

  • Mission control animates in the wrong direction when you start in full screen mode

    When I am in fullscreen mode, open mission control, and swipe left to right the animation moves in the wrong direction. The correct space appears, but it animates as if I swiped right to left. All subsequent swipes work correctly until I close mission control and follow the same steps again.
    Whats going on?

    Go into system prefs trackpad then uncheck scroll direction.

  • HT204053 I bought the iPhone 5 today.  I have 2 apple IDs.  I entered the wrong one when I set up the phone.  How can I change it to the other ID?

    I bought the iPhone 5 today.  I have 2 apple IDs and I entered the wrong one when I set up the phone.  How can I change it to the other one?

    Start Over...
    ERASE / Clear All Data
    See  Erase your device  Here  >  http://support.apple.com/kb/HT4137
    Go to Settings > General > Reset > Erase all content and settings

  • Although all photos in my libraries are rotated to the correct orientation, random pictures still show up in the wrong position when viewed on Apple TV. Any suggestions?

    Although all photos in my libraries are rotated to the correct orientation, random pictures still show up in the wrong position when viewed on Apple TV.
    Any suggestions?

    silvergc
    Thanks for your comments
    Several of our iPhone users in the UK reported the problem this morning, and as the Apple fan in the office I've got the job of resolving the issue
    The original Excel was an old .xls file, but I have saved it as a .xlsx and the problem still appears
    I haven't spoken with our developer yet, but I assume he has created the Excel file using some programming tools rather that directly using Excel
    In the meantime I have created a simply spreadsheet with 8 cells contain values
    In the first 4 cells, I have formatted them using Currency, and have used the currencies USD, DEM, GBP and CHF
    In the remaining cells I have formatted them using the Accounting option, using the same currencies
    When I review the spreadsheet on the iPhone (or iPad), the first 4 remain the same yet the last four all show the £ symbol
    I have now changed the Region Format of the iPhone to United States, and when viewing on the iPhone the bottom 4 values are now all showing the $ sign!
    If I had created the spreadsheet I would have put the Currency code in a seperate cell and purely used a numeric format for the number, and there would be no issue.  That might be the only solution
    Yes, the Director has the full MS Excel app on his Windows 8 device, but I can't expect all of our clients to go and do the same, in business many of them will have the iPhone
    We may have to change the way we produce the report because of Apple's failings here, and it's not the first time that we have had to change something because Apple devices can't display them properly
    In business, submitting a potential job contract only for the recipient to get the wrong idea of the costs is a major concern

  • Pretend I know nothing about this topic, because I DON'T, and help me figure out how to format bullets in 'Pages' for IPad. I turned them on somehow, and now can't turn them off, and they are popping up in all the wrong places

    I think I effectively proved my point about knowing nothing about this, by posting my whole question in the title. To review, I have a 1 year old iPad, and have Pages on it for a word processing program. I somehow turned on bullets on one of my documents and can't figure out how to stop it, and they are in all the wrong places. How do I turn it off?

    1-800-676-2775  apple support   tech support 1 800 275 2273
    If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
    click the apple----->click about this Mac ------> click on version----> until you see the serial number.  You may have to do this a couple of times if it freezes before you have all the numbers.  A camera might help.
    Good Luck

  • I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?

    I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?

    I get the same kind of thing..
    I'm on osx 10.7.2 and once I click the soundtrack pro icon I get an error message. I had problems with logic pro & my digi002r soundcard midi drivers but now is fixed (using a midi adapter).
    here is the code:
    Process:         Soundtrack Pro [1705]
    Path:            /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
    Identifier:      com.apple.soundtrackpro
    Version:         3.0.1 (960)
    Build Info:      SoundtrackProProject-9600000~277
    Code Type:       X86 (Native)
    Parent Process:  launchd [140]
    Date/Time:       2011-10-18 13:12:05.201 +0200
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          195725 sec
    Crashes Since Last Report:           3
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      23728D81-590B-4C3A-8C67-1709945CD132
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
      Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
      Reason: image not found
    Binary Images:
        0x1000 -   0x7f7ff8  com.apple.soundtrackpro (3.0.1 - 960) <77CF322B-8BBE-AAEA-173F-75A237035319> /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
      0x947000 -   0x94bfe6 +STPInterleave (??? - ???) <E87D1F34-6D97-63DB-454C-CF3D1B03F8E5> /Applications/Soundtrack Pro.app/Contents/Frameworks/STPInterleave.framework/Versions/A/STPInterleave
      0x952000 -   0x98ffff  com.apple.vmutils (4.2.1 - 107) <43B3BFA5-8362-3EBD-B44B-32DCE9885082> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
      0x9a9000 -   0x9f5ffb  com.apple.audio.midi.CoreMIDI (1.8 - 42) <CBD34EBC-0FFD-34B4-B55A-BE1F61EF4BD8> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
      0xa18000 -   0xc3eff7  com.apple.prokit (7.1.1 - 1511) <498819A4-1BDD-3671-8796-E11865BCFBCE> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
      0xd49000 -   0xd49fff  com.apple.iokit.dvcomponentglue (2.0.7 - 2.0.7) <1CFA5944-AB33-3A41-B4D2-4A624A514C0D> /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue
      0xd4d000 -   0xd54fff  com.apple.AEProfiling (1.2 - 22) <43A46C32-8E13-82DD-8AF1-2A40690BF810> /Applications/Soundtrack Pro.app/Contents/Frameworks/AEProfiling.framework/Versions/A/AEProfiling
      0xd5e000 -   0xd6dfff  com.apple.AERegistration (1.2 - 77) <5D18C47F-6F9E-0C4C-8875-24A14A97186D> /Applications/Soundtrack Pro.app/Contents/Frameworks/AERegistration.framework/Versions/A/AERegistration
      0xd81000 -   0xd83fff  com.apple.ExceptionHandling (1.5 - 10) <6CA9446C-7EF9-35EE-BDF2-AA8D51E93E9E> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
      0xd89000 -   0xe49fff  com.apple.omf_framework (1.1.0 - 1.0) <ED5F21BC-18CD-D7F7-3D2E-F7F856BC0D40> /Applications/Soundtrack Pro.app/Contents/Frameworks/OMF.framework/Versions/A/OMF
    0x11000000 - 0x1102afeb  com.apple.proapps.ControlSurfaceSupport (2.0 - 68) <BD914236-49D8-9C9A-E8D6-CBC1738850B3> /Applications/Soundtrack Pro.app/Contents/Frameworks/ControlSurfaceSupport.framework/Versions/A/ControlS urfaceSupport
    0x8fe88000 - 0x8feba9c7  dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
    0x90840000 - 0x90992fff  com.apple.audio.toolbox.AudioToolbox (1.7.1 - 1.7.1) <7646E131-08EE-3D72-ADA2-4A61C562B36E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x90993000 - 0x90993ff2  com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x91e60000 - 0x92036fe3  com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x924a8000 - 0x92509ffb  com.apple.audio.CoreAudio (4.0.1 - 4.0.1) <089D78E0-46A6-38DB-9545-7F35CC815939> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x93281000 - 0x9328ffff  com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x93331000 - 0x93331fff  com.apple.vecLib (3.7 - vecLib 3.7) <8CCF99BF-A4B7-3C01-9219-B83D2AE5F82A> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    0x93332000 - 0x93493ffb  com.apple.QuartzCore (1.7 - 270.0) <0916DA83-6400-3FEA-BC53-5F4BA4D126EC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
    0x94326000 - 0x9436dfff  com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x94420000 - 0x946a5fe3  com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
    0x97dd0000 - 0x98082ff7  com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x99d12000 - 0x99d76fff  com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x9adc8000 - 0x9adc8fff  com.apple.audio.units.AudioUnit (1.7.1 - 1.7.1) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x9aef1000 - 0x9aef1fff  com.apple.Carbon (153 - 153) <6FF98F0F-2CDE-3888-A304-4ED447D24CE3> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x9b2ec000 - 0x9b2ecfff  com.apple.Cocoa (6.6 - ???) <650273EF-1ABC-334E-B745-B75AF028F9F4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
    Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
    Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD5000AAKS-402AA0, 500,11 GB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 3
    USB Device: USB to Serial-ATA bridge, 0x04fc  (SUNPLUS TECHNOLOGY CO., LTD.), 0x0c25, 0xfa120000 / 6
    USB Device: iLok, 0x088e, 0x5036, 0xfa130000 / 5
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: UM-2G, 0x0582  (Roland Corporation), 0x0106, 0xfd140000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
    FireWire Device: Digi 002Rack, Digidesign, 400mbit_speed
    thanks everyone
    e

  • Why does the document window in illustrator cs6 move to the far left when I reopen the file?

    why does the document window in illustrator cs6 move to the far left when I reopen the file?

    Hi John,
    thanks for the fast response.  cs5 remembered the window position.  I like having the window in the middle as I have a 27" monitor.  I just upgraded to cs6 yesterday and I'm sure it was remembering the window document position.  I think.  If i find out how to fix this, I'll post it here.
    And while I'm on the subject of cs6, why the f*** did adobe combine the stroke and swatches pallettes?  Now I forever have to click stroke and swatch tabs all day.  And I love the army and navy file icons of photoshop and illustrator.  I won't comment on Acrobat X.  ; (

  • I put in the wrong birthdate when registering my daughter's new iPod touch. When I went to correct it, it looked me out

    I put the wrong birthdate when registering my daughters new iPod Touch. It didn't let me establish a new account because the birthdate was too young. When I went to correct it, it continued the lock her new registration out. Now I can't successfully register her on iTunes with her correct birth year.

    i just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
    So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating.  I have been asking and no one knows what to do.

  • Hello, maybe i am writing to the wrong place, but i'll try here. so i have a slogan idea for iPhone 5. to who can i write to?

    hello, maybe i am writing to the wrong place, but i'll try here. so i have a slogan idea for iPhone 5. to who can i write to?

    Try the link below.
    http://www.apple.com/feedback/iphone.html
    Stedman

  • Hey, it could be that I'm in the wrong place, but I have a question.

    Hey, it could be that I'm in the wrong place, but I have a question.
    So we are a gaming community, and we have the privilege of setting up tournaments in (exm) StarConflict.
    My question is , where looking for sponsers. I'm not asking mutch (like laptops or what ever) i'm just asking for like steam gift's to or members.
    And steam Gift's that we can give away as a price in or tournament... (or any way that we cud get sponserd)
    If I'm at the wrong place for this cud you redirect me to the right place?
    Thank you for your time, GrZ .

    I believe this is a question you need to ask MSI support...mailto:[email protected] They should be able to provide you with the information your looking for, or at least provide you with the direction of where to go. You could also contact some of the other MSI sponsored teams, and look to join them, or ask them how they became sponsored...

Maybe you are looking for

  • Regarding alv output

    Hi all,           My user command is not working in my program.            When i am clicking in any value on any filed its not working out. I have debuuged also i m not getting. <code> *& Report  ZVEN_PRA REPORT  zven_pra         NO STANDARD PAGE HE

  • Do LR3 and PS CS5 use the same print engine?

    I use both of these programs but, after finishing whatever work I have to do in PS, I take the image back into LR for printing. I like the layout there and I certainly seemed to get better results there back when I was using LR2.7 and CS4. With the n

  • Alternative Mail clients for Exchange server?

    Can anyone suggest alternate email client software that will work with an exchange server? i hate Entourage, and need to look into alternatives after Mail stopped communicating with works Exchange server today! Can't find any reason for the failure (

  • IPhone SDK installation problem

    Hi All, I have a problem installing the iPhone SDK. In the installation process, "Installation Type" page, the page you can choose modules either you want to install or not. I see "iPhone SDK" module is listed, but i couldn't select it, it's greyed o

  • Any way to have time machine when every user is logged out?

    Hello. I have a small server running os x.5 and a hard disk with Time machine attached to it. For security reasons, the best way to have it run is to have the machine run with no user logged in. Several people work on it at distance by uploading/down