My TOC in the epub document does not link to the chapters

Hello!
I created a document in pages that I am exporting as an ePub. When creating the TOC, I have ticked "make page numbers links". However, when I open the epub file, the TOC that appears in the document 1) does not show page numbers; 2) does not link to the chapters (or anywhere else).
What is it that I'm doing wrong? Any help will be appreciated.
Thank you!

Try a restart of your entire system. Shut down both your modem and your router if they are two separate devices. Then restart each item one at a time with about three minutes between each device.
Also reset the iPad by pressing and holding the Start and Home keys together, ignoring there'd slider until the Apple logo appears.

Similar Messages

  • Saved keynote document could not be read. Error message says The document does not have a valid format.

    Using Keynote '09 on an iMac OS 10.8.4. Two of my students saved a Keynote file then the next day when trying to open received an error message- The document "4b Molly.key" could not be read. The document does not have a valid format. The students are saving correctly. Any ideas how we can retrieve a working file? Why did this happen?

    Just tagging on as I encounted this problem this morning.  I'm using Mavericks, on MBP (late 2013). 
    Have both Keynote 5 and 6 - tried to open the file in both, to no avail.   I have also tried the renaming of .key to .zip that seemed to work for others with previous OS, but does not fix now.  Also tried uploading to iCloud, renaming, redownloading - no fix there either.  I've tried to open on iPad and on a different user's iMac - again, get the same error.
    It worked yesterday and the day before.  It is a large file; however, I realized that from last night to this morning the only different thing I did was that I inserted photos in the keynote deck by drag & drop verses Insert/Choose and wondering if this corrupted the file.
    I'm going to hope a fix is out there somewhere and that I don't have to spend hours upon days upon weeks redoing this 98+ page deck.
    Any suggestions?

  • The document does not have a valid format.

    I created a special format document when I had Pages '08. I needed the proportions of the document to match the special paper on which the document would be printed so I created a special size for my document rather than 8 1/2 x 11. If I remember right it was closer to 8 1/2 x 13 or so. Anyway, I have now upgraded to Pages '09 and can no longer open any of these special format documents. I have versions of a couple of the documents that were created in Pages '08 without the special proportional size page and they open without issue. However the special size documents all get "The document does not have a valid format" and will not open. I really NEED these documents. I have seen some posts about renaming to a .zip and then something about an index file but I don't understand where this index file might be and what good it will do to open it. Also I know the files exist because they are still showing their original file sizes (not 0 MB). Any assistance would be appreciated.

    Don't continue to search fruhulda.
    I never saw such files.
    The only things which I may recognize are :
    the strings :
    mluc
    (10) nbNO --> Norvegian
    (16) svSE --> Sveridge
    (4) fiFI --> Finnish
    (1) daDK --> Danish
    (17) zhCN --> Chineese(1)
    (5) frFR --> French
    (8) jaJP --> Japanese
    (3) enUS --> English (US)
    (12) ptBR --> Portuguese (Brasil)
    (15) esES --> Spanish
    (18) zhTW --> Chineese(2)
    (14) ruRU --> Russian
    (9) koKR --> Korean
    (6) deDE --> Deutch (Germany)
    (2) nlNL --> Dutch (Nederland)
    (7) itIT --> Italian
    They are the symbols used to identify the languages used for 16 versions
    Two others are missing:
    (11) Polish (Polska) missing
    (13) Portuguese (Portugal) missing
    I found also
    iMac in plain ASCII and .i.M.A.C (dots are in fact NIL characters) which is the Utf 16 representation of iMac.
    During a few seconds I thought that it was a piece of System Files but the page thumbnail must be available somewhere so that the Finder is able to display it.
    I will send these genetically modified documents to Apple Bugs Hunters.
    Yvan KOENIG (VALLAURIS, France) lundi 31 janvier 2011 17:46:39
    At the very end there is also the trailing string which fool the message parser:
    the formula : *_Copyright Apple, Inc., 2010

  • Suddenly double-clicking on a PDF document opens the Acrobat application but the document does not load.

         Up until today I had no problem opening a PDF document that I have already saved by double-clicking on it.  Now when I do that, my Acrobat application opens, but the PDF document does not.  I need to use File/ Open to select the document I want to see, or I need to right mouse click on the PDF document and choose “Open with”.  I had this once before and I had help to resolve this, but I am using Acrobat 7 Professional and since it is not supported, I can’t get help when I call Support.

    Sounds like a Windows problem. Try the right click and then select the ALWAYS open with feature. That is supposed to fix the link. If that does not work, open the file type menu under the TOOLS>Folder Options (XP view, may be other in VISTA). If you select advanced under PDF, you should get a link under the open>edit something like "c:\adobeapp\acrobat 5.0\Acrobat\Acrobat.exe" "%1". The comment you make sounds like the %1 or the quotes are missing. Bill

  • The document could not be read: the document does not have a valid format.

    I created a 10MB document in Pages about a week ago. Around that time, I reopened the document and edited it with no problems. A week later, I've tried to open the document but Pages gives me the following error:
    The document "[Document Name].pages" could not be read. The document does not have a valid format.
    I created, edited, and saved this document in Pages, so I am confused as to why Pages would be unable to re-open the file, especially as I haven't done anything to it since it worked last. I was worried that my hard drive might have corrupted the file so I ran diagnostic tests but everything was fine. I was also worried that because the file is synced with my iDisk that iDisk corrupted the file while syncing it or something but I don't know what I could do to check this. Either way, it's an important file and I need to open it: I thought that by putting it on iDisk I would have a copy in case something happened to my computer but this seems not to have helped (and maybe hurt!).
    Any file recovery tools or other ways that I can open this file?

    No, I don’t have Pages ’08 installed, but did in the past—is this a current issue?
    Pages ’09 is registered.
    I have tried dragging the file onto the app icon directly.
    To recover at least the text, I did the “rename as zip, open index.xml” trick. Of course, in order to interpret that file, you do have to understand XML (thank god I do)… but if I hadn’t, man that would’ve been a major bummer.

  • HT4788 The image I placed in the rtf document does not showup.

    I can create and veiw a (PolicyBanner) rtf document just fine. However, the image I placed in the rtf document does not show. (I've tried both jpeg & png) How was the image placed in the sample doc?

    Needs to be saved as a .rtfd
    or export as .rtfd and go from there.

  • Error at the time of J1IFQ(Sub Contracting) "The Document does not exist."

    Dear All
    At time of Quantity Reconciliation for Sub-Contracting Challan (J1IFQ) i am getting the error " The Document does not exist."
    But 103 & 105 already made without any error.
    Please help me out.
    Chandrashekhar

    Hi,
    Could you please let us know process which you are following for it ?
    I hope it goes like this.
    - Create PO
    - Transfer posting goods to subcontractor
    - Create sub contracting challan
    - Receipt of goods
    - Quantity re concilliation
    - Closing the challan
    If it is with the above process..it should work..
    Thanks and Regards
    Deepak Gupta

  • The 'Do Not Email' when sharing a Document does not always allow a check mark to be entered.

    The 'Do Not Email' when sharing a Document does not always allow a check mark to be entered.
    Just wanted to report this. I have not checked to see if it has been previously submitted. The issue
    is intermittent.

    I think this happens because you need to send e-mail when you do the first contact with the user. Tellimg him who you are and etc.
    When you already "know" that user, u can check the box.
    Hope it helps,
    Andrey Farias

  • Please help!! Pages 09 :: Pages Files Can not be read - The Document Does Not Have A Valid Format

    I used pages to write my coursework, but when I saved it, pages crashed...
    Now I tried to reopen the file. It shows "The document ___.pages can not be read - The Document Does Not Have A Valid Format".
    I've looked through the forum to find any fix methond.  I tried the "zip solution" -> changes the file entention as .zip file.
    But the still can not solve my problem. it shows the zip file can not be open..
    I put my files in the following link.
    http://dl.dropbox.com/u/16476040/Marketing%20Coursework.pages
    Please could anyone try to offer me assistance. bacause it is very urgent.
    I will be very grateful if anyone can help me.

    Hi, Peter
    I followed the instriction, and changed to root to locate /.DocumentRevisions-V100/
    I can see several ______.pages file under the ./DocumentRevisions-V100/PerUID/
    From the "Date Modified" attribute, I can find several __.Pages files that what I want.
    But unfortunately, when I tried to open these version files, it still shows
    The document can not be read. The Document does not have a valid format....

  • The problem is that I select as a pdf document does not open completely but leaves the mail. Also I can not open more even Ibook other documents already saved

    the problem is that I select as a pdf document does not open completely but leaves the mail. Also I can not open more even Ibook other documents already saved

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • Excise Invoice creation error -Billing document does not exists

    Dear Experts,
    I have created supplementary sales order, billing with refernece through sales order by VF01.
    Now I want to create Excise Invoice but system gives error Billing Document does not exists
    I have checked billing document in VBRK table & it is showing in table.
    My item categroy is L2N -and set it to C
    I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
    Pl. guide me.
    Thanks
    Trupti

    Resolved my problem.
    Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
    outbound delivery.
    So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
    Thanks to all.
    Trupti.

  • "Document  does not exist" exception when updating a Purchase Order, Agentry

    Hello Gurus,
    I updated a PO in SAP by calling the Bapi. It displays the error:
    com.syclo.sap.mm.steplet.POUpdateSteplet::throwExceptionToClient::1513::POUpdateSteplet - Document  does not exist |
    I checked on SAP and found the PO there. And in the log file, the PONumber, Company code are sent to the server. Then  why It throws the above exception.
    I spent a day but cannot find out what happen to the PO. Please help me. Thank you very much.
    Edit: Even though I hard coded the PO Number, it still display the error.
    JCO.Structure header = _imports.getStructure("IS_POHEADER");
      String poNumber = user.getString("transaction.PONumber");
      setValue(header, log, "PO_NUMBER", poNumber);
      String companyCode = user.getString("transaction.CompanyCode");
      setValue(header, log, "COMP_CODE", companyCode);
      String purchaseOrg = user.getString("transaction.PurchaseOrganization");
    JCO.Structure headerX = _imports.getStructure("IS_POHEADERX");
    setValue(headerX, log, "PO_NUMBER", poNumber);
    setValue(headerX, log, "COMP_CODE", "X");

    Jason,
    I checked the SAP error log and found the issue in the log. I am not sure if it is the cause of "Document doesnt exists. Please help me figure it out. Thank you very much.

  • 'Document does not contain any items' error while posting GR from BAPI

    Hello Friends,
    I am trying to post GR from BAPI 'BAPI_GOODSMVT_CREATE' but some time it post successful and some time it does not post..gives error 'Document does not contain any items'....i have search all option but did not get any solution why this error is coming....kindly help me if you have any information regarding that.
    The strange thing is i have alrady posted GR with some test data and later on again am trying to post GR with same test data but it is giving error as above.
    For your information...i am using enhancement spot in standard program for GR posting...could it give any problem.
    Regards,
    Rajkishor.

    Solved by my self...problem was i were using enhancement spot in standard program because of this it was creating problem have search new enhancement spot and put my code out there now it is working fine.
    Thanku very much all of you for your reply.

  • Error "Account assignment 00 for  purchase document does not exist " when u

    Hai,
    I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
    The error says " account assignment 00 for purchasing document does not exist".
    The scenario is very simple.  I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10.  Tax code is U2 ( 7% tax).
    I am passing the following at header level.
    Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
    At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
    Does this error has got any thing to relate configuration matters?
    Regards,
    Upender

    Hi Upender,
    In some cases, depending on the type of PO / Posting,
    you might have to populate the accounting data itab and pass in the BAPI parameter.
    you can select the accounting data from EKKN for the PO.
    Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
    Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
    Thanks,
    Ram

  • Cancellation document does not generate Accounting document

    Hi Experts,
        I am facing an issue that when a Billing document is getting cancelled through workflow ,the billing document does not generate a accounting document .I tried debugging the issue to check it but could not find the root cause of the issue.
    In the code we are using 'BAPI_BILLINGDOC_CANCEL1 to cancel the billing document.
        How to find that the accounting documents are getting  generated from the corresponding billing documents correctly.
    Thanks&Regards,
    Praveen

    First of all, are you able to create S1 type cancellation document after you call the BAPI? If you are not even able to generate the cancel document, perhaps you are missing committing the BAPI after calling it by using BAPT_TRANSACTION_COMMIT.
    Also are you able to create cancellation and accounting document by calling the BAPI through a test ABAP program? First check it out before using it in your workflow.

Maybe you are looking for