My UIRCallbac​kTable.c file is not getting updated to reflect my changes

I am using my CVI code in Visual C++ and I removed some fields in the .uir file that had callbacks. The UIRCallbackTable.c file is not getting written to to reflect the change. I am using Clearcase and I have the file checked out. I am getting unresolved external symbol errors for these callbacks as a result. Any ideas on why this would happen?

Are you using Visual C++ 6.0, Visual C++ 2002, or Visual C++ 2003?
In each case, Measurement Studio installs a Visual Studio add-in that monitors the .uir file for changes and updates the callbacks file as appropriate. Make sure that the add-in is enabled in the Visual Studio environment that you are using. In VC6, the add-in is named LabWindows/CVI VC AddIn. Go to Tools>>Customize>>Add-ins and Macro Files to enable it. In VC2002 and VC2003, this functionality is part of the main Measurement Studio add-in. Go to Tools>>Add-in Manager to enable it.
If the add-in is enabled, and updates still aren't happening, please post a .zip file with your CVI project and your VC project so that we can check it out.

Similar Messages

  • Changes to Excel files are not getting updated

    File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected.

    Hi,
    According to your post, my understanding is that changes to Excel files are not getting updated.
    I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
    For more information, you can refe to:
    Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
    If you use PowerPivot, you can refer to:
    Refreshing PowerPivot Data in SharePoint 2013
    If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
    You can refer to:
    PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
    In addition, here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • File does not get updated in document library

    I'm encountering weird behavior which I hope you can suggest on how to further troubleshoot. There are some document libraries that whenever I upload a new version of a file, the file's contents do not get updated (when I open the file after check-in,
    it still shows the old content) but the Modified By and Modified fields get updated.
    Remote Blob Storage is turned on for our site; could it be RBS-related? However, only a few document libraries exhibit this kind of behavior.

    Hi Kev,
    There's no particular pattern in the differences between libraries exhibiting the behavior and those that do not. If it matters, the Style Library is experiencing this kind of behavior. We also have a document library renamed to "Images" (its URL
    is /Images) that also exhibits this behavior. I also tried disabling and enabling versioning, still the same behavior. I even tried deleting the file and reuploading with the same file name, still the same behavior!

  • Files are not getting updated in sharepoint 2013 because of office upload center error

    Dear Team,
    I am getting upload failed/upload error in Office Upload Center.
    Scenario: I opened excel(version is 2013) file from sharepoint 2013 application and closed and after updating. Later when I opened the file I got error like "UPLOAD FAILED We are sorry this didn't work. Try saving again later and if that still doesn't
    work, click save a copy."
    I found the error is because file is getting upload failed / upload error in microsoft office upload center2013. 
    Please let me know if anyone know the solution for my issues
    Thanks in Advance
    Girish

    Hi Girishkg,
    The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
    The limit can be set in web application’s web.config file or in IIS .
    There are two detailed articles about setting the limit:
    http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
    http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
    Feel free to reply if the issue still exists.
    Best regards
    Wendy Li
    TechNet Community Support

  • OpenScript 12.2.0.1 Failed to access the databanks,CSV index file not getting updated

    Hi,
    I have been working on OATS for quite sometime,Off late i'm facing a unique problem out of nowhere
    when i run web functional script i'm getting the error "oracle.oats.scripting.modules.basic.api.exceptions.VariableNotFoundException:"
    Even though i have added the required databank,These were working fine for past 6 months suddenly started give me problem.
    1 thing i noticed was if i do any modification in the databank CSV file the corresponding INDEX file is not getting updated.Hence the system is unable to read the databank data i guess.
    Has anyone faced the same problem?Please help.

    Hi,
    I have been working on OATS for quite sometime,Off late i'm facing a unique problem out of nowhere
    when i run web functional script i'm getting the error "oracle.oats.scripting.modules.basic.api.exceptions.VariableNotFoundException:"
    Even though i have added the required databank,These were working fine for past 6 months suddenly started give me problem.
    1 thing i noticed was if i do any modification in the databank CSV file the corresponding INDEX file is not getting updated.Hence the system is unable to read the databank data i guess.
    Has anyone faced the same problem?Please help.

  • File is not getting deleted in File-RFC-File without BPM

    Hi,
    I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
    For the sender CC, I'm passing the following parameters,
    Transsport protocol: File system
    Message protocol: File
    QoS: BE
    Poll Interval: 30 sec
    Mode: Delete
    File type: Binay
    Please let me know if I missed anything while passing the values.
    Thanks,
    Swamy
    Edited by: Swamy Mothe on Jun 15, 2009 8:52 AM

    Hi
    Then , is Sender and receiver File Adapter is using same folder )
    Just a question.
    But having all permisions and above config would delete the file
    can u see the status of u r File Adapter in RWB.? Is it in green?
    rgds
    srini

  • JAR file does not get uploaded to client for my SERVLET generated APPLET

    Some help please...
    I have a servlet that generates the HTML code that contains an APPLET. This APPLET needs a JAR file that is listed under its ARCHIVE property. The SERVLET is in a JAR file that is in the same directory as the other needed JAR file. If I create a static HTML with the output of the SERVLET it works fine. But if go through Weblogic the needed JAR file does not get uploaded to the client so I get a java.lang.NoClassDefFoundError:and my APPLET does not load.
    Q1: I am not sure what to put under the CODEBASE tag. I tried "." and I also tried "http://mymachine" but both did not work. I also tried without the CODEBASE tag. No luck. The SERVLET is bound to http://mymachine/servlet.
    Q2: Does anyone have any suggestions on how to do this? Is there a way to force the browser to upload a certain JAR file?
    Thanks...

    It works!!
    This is what I did:
    The jar file in question was the weblogic.jar. I tried putting it under the lib directory of my war file but I had problems because the weblogic.jar contains other war files inside so when I tried to deploy my war file it also tried to deploy the inner war files which for some reason did not work. So I tried removing the war files from the weblogic.jar and this time I had no problems deploying my war file but I still could not find the classes I needed. So I tried moving the weblogic.jar to the root dir of my war file and it worked!! Now the trick here was: I did not set the CODEBASE AND I had the ARCHIVE paramenter set in TWO places like below:
    <APPLET CODE = "marketmap.client.MarketMapApplet"
    ARCHIVE = "weblogic.jar"
    WIDTH = "657"
    HEIGHT = "382"
    ALIGN = "BOTTOM"
    ALT = "APPLET tag not recognized">
    </XMP>
    <PARAM NAME = CODE VALUE = "MyApplet" >
    <PARAM NAME = "type" VALUE="application/x-java-applet;version=1.2.2">
    <PARAM NAME = "scriptable" VALUE="false">
    <PARAM NAME = ARCHIVE VALUE="weblogic.jar">
    </APPLET>
    Actually if you do not place a parameter named ARCHIVE (at the end) it wil NOT work. I tried with multiple jar files listed and it works great too.
    Anyway I figure I'd share. Thanks for the help too.
    Lastly for people who choose not to upload the jar files to clients, you should look at the bea documentation on applets. It lists a classpath servlet that allows you to provide classes to the clients without having to force them to download the jar file.

  • File to Proxy----Tables not getting updated.

    Hi all,
    I have File to proxy scnerio, where Data from file is uploaded in to BAPI in turn
    updated in to tables.
    If i take pay load from Moni  and test in SPROXY then tables is getting updated.
    But when i run Scnerio form XI tables are not getting updated.
    Please help......

    Hi ,
    Check this out if you missed any step.. This is exactly on your senario.
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    hope this will help you.
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • Matlab workspace not getting updated while labview mex file is running

    Hi,
    Let me start from the overview of the system for better understanding.
    The system is to acquire data from a DAQ6070e using labview 7.1 . this data is then to be used in matlab for processing. All this needs to happen in real time hence the data is to be acquired from labview and outputted into matlab in real time.
    in order to do this we generated the labview and the matlab codes seperately. After days of hard work we managed to import the labview vi into matlab using a math interface toolkit, but now have run into another interesting problem.
    the workspace in matlab is not getting updated during the time the labview vi is running inside matlab. it only updates after the vi has run . for example if i need to monitor the system for 300 seconds then ideally the labview vi should output the samples for each acquisition and output it to matlab, what actually is happening is that the labview keeps running for 300 seconds without outputting any data during those 300 seconds and only outputs the last set of acquisition values at the end of the 300 seconds. Which beats the purpose of the whole program.
    Kindly help
    Regards
    Manuj

    Thanks Mate,
    What you said about "MEX file will not be able to "store" data between runs" ,i realised in the morning. as a result i dont think your suggestion of for loop will also be effective as labview mex file will not acquire data during matalb code execution and vice versa.
    Hence i have decided to do it the other way...we will now try to run the matlab code in labview.
    this leads to other problem
    As this is a real time operation i need to find out a way of storing the data into computer memory and then reading from it(when i say memory i do not mean writing it to a file and readin from it as that is slow) becasue i think the buffer i am specifying in my AI config is not big enough.
    I was thinking maybe i should use a RT FIFO queue but then i have not been able to find out the difference between buffer memory and fifo memory. ie is buffer memory supposed to be the ram memory or is it the hard disk memory?
    I am posting the vi here for easy understanding
    All help is very much appreciated
    Attachments:
    RT-loop2ver21.vi ‏231 KB

  • IMovie HD creates corrupt db file which not get deleted out of trash

    iMovie HD creates corrupt db file which not get deleted out of trash.
    How to delete this file ?
    Please help me out,
    Thank You.

    Where is what file created? (Do you see it in iMovie or Finder?)
    Which trash, iMovie's or Finder's?

  • CC clean up tool saying some files did not get cleaned close browser and run again

    When I run the clean up tool saying some files did not get removed try closing browser and run again did not have browser open CC will not start spinning progress wheel but never connects

    contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • File is not getting picking UP by B2B

    Hi
    I have done a new trading partner setup and I have done below configuration for the new Trading partner. Please find the details
    Business Protocol = EDI X12 over Generic Exchange
    1) Delivery Channel
    2) Document Exchange
    3) Transports
    4) Transport Server
    And I have created below configuration at Host Trading partner side...
    1) Delivery Channel
    2) Document Exchange
    3) Transports
    4) Transport Server
    After droping the file File is not getting pickup by B2B. And I have tested the .trc file (trace file) and b2b.log file. No entries has been recorded.
    Is there any way I can debug to see why B2B is not able to pickup the file.
    Regards
    Kiran

    Ramesh
    We are sending 997 to our trading partners.
    I believe Host will pickup the file so I have sent up Host level delivery channel to pick the file and I have setup trading partner level Delivery channel to send 997 to them.
    Could you please let me know this is correct? If this is correct what could be the problem not able to pickup the file.
    Regards
    Kiran

  • Base table is not getting updated

    Hi friends,
    am trying to update the attribute18 from the per_vacancies table by adding 1 to it
    when am running the concurrent program it is not updating the table
    what might be the reason
    this is my code
    CREATE OR REPLACE PACKAGE BODY apps.update_vacancy_pkg
    IS
    PROCEDURE update_vacancy_prc (p_err_buf OUT VARCHAR2, p_ret_code OUT NUMBER)
    IS
    l_object_version_number per_vacancies.object_version_number%TYPE;
    l_vacancy_id per_vacancies.vacancy_id%TYPE;
    l_inv_pos_grade_warning BOOLEAN;
    l_inv_job_grade_warning BOOLEAN;
    l_validate NUMBER := 0;
    l_assignment_changed NUMBER;
    l_return_status VARCHAR2 (240);
    l_openings VARCHAR2 (240);
    l_err_msg VARCHAR2 (200);
    l_vac_id per_vacancies.vacancy_id%TYPE;
    l_attr VARCHAR2 (100);
    l_attr1 VARCHAR2 (100);
    l_attr2 VARCHAR2 (100);
    l_attr3 VARCHAR2 (100);
    l_attr4 VARCHAR2 (100);
    BEGIN
    BEGIN
    SELECT object_version_number, attribute7, vacancy_id
    INTO l_object_version_number, l_openings, l_vac_id
    FROM per_vacancies
    WHERE vacancy_id IN (SELECT MAX (vacancy_id)
    FROM per_vacancies);
    EXCEPTION
    WHEN OTHERS
    THEN
    l_vac_id := 0;
    l_openings := 0;
    END;
    BEGIN
    SELECT MAX (attribute18)
    INTO l_attr
    FROM per_vacancies;
    SELECT (REGEXP_SUBSTR (l_attr, '.*C'))
    INTO l_attr1
    FROM DUAL;
    SELECT REGEXP_REPLACE (l_attr, '^.*C(.+)$', '\1')
    INTO l_attr2
    FROM DUAL;
    SELECT TO_NUMBER (l_attr2) + 1
    INTO l_attr3
    FROM DUAL;
    SELECT l_attr1 || l_attr3
    INTO l_attr4
    FROM DUAL;
    EXCEPTION
    WHEN OTHERS
    THEN
    l_attr4 := 0;
    END;
    l_object_version_number := 0;
    l_assignment_changed := 0;
    l_return_status := 0;
    per_vacancy_swi.update_vacancy
    (p_validate => l_validate,
    p_effective_date => SYSDATE,
    p_vacancy_id => l_vac_id,
    p_object_version_number => l_object_version_number,
    p_number_of_openings => l_openings,
    p_budget_measurement_value => l_openings,
    p_attribute18 => l_attr4,
    p_assignment_changed => l_assignment_changed,
    p_return_status => l_return_status
    COMMIT;
    fnd_file.put_line (fnd_file.LOG, 'Executed Vacancy' || l_vac_id);
    fnd_file.put_line (fnd_file.LOG,
    'Assignment chaged = ' || l_assignment_changed
    fnd_file.put_line (fnd_file.LOG, 'Return Status = ' || l_return_status);
    fnd_file.put_line (fnd_file.LOG, 'l_attr4= ' || l_attr4);
    END;
    END;
    it is hsowing in the log file with 1 added to the attribute18
    but the table is not getting updated
    can some one of you suggest a solution pls
    thanks
    Edited by: 776317 on Apr 27, 2011 9:15 PM
    Edited by: 776317 on Apr 27, 2011 10:01 PM

    but how come the seeded api has this
    PROCEDURE update_vacancy
    (p_validate in number default hr_api.g_false_num
    ,p_effective_date in date
    ,p_vacancy_id in number
    ,p_attribute17 in varchar2 default hr_api.g_varchar2
    ,p_attribute18 in varchar2 default hr_api.g_varchar2
    .);Enable trace/debug, this may give you an idea about the data which is not saved.
    Thanks,
    Hussein

  • HIREDATE & FIREDATE of Employee are not getting updated in t-code PA20.

    Hi all,
    HIRE DATE & FIRE DATE are not getting updated whenever the data of an employee loaded into SAP T-Code PA20 .
    And even the input data contains the both the fields HIRE DATE & FIRE DATE
    Can any one please suggest us why its happening.
    Thanks,
    Lava.

    Hi Girishkg,
    The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
    The limit can be set in web application’s web.config file or in IIS .
    There are two detailed articles about setting the limit:
    http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
    http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
    Feel free to reply if the issue still exists.
    Best regards
    Wendy Li
    TechNet Community Support

  • CPS parameters are not getting updated in SAP

    We have recently migrated our SAP and CPs servers, after that we are  facing few CPS issues  and it is affecting lot of key batch jobs. One typical example is given below.
    CPS is supposed to trigger a job  DD simulation, by copying the SOURCE_DATE_ID -1-Dec-2006  and modifies the parameters BUDAT and FAEDA_HIGH. The parameter FAEDA_HIGH is calculated as time.now()+ 5 working days as defined in the expression. When we try to run the job today with the date 24 Dec 2010, CPS has calculated the FAEDS_HIGH correctly as 2-Jan-2011. IN SAP the variant gets created but for the field FAEDA_HIGH the date value is not getting updated properly it is display some other date. (e.g)  It is showing as 4-jan-2011,  I removed the xpression and gave another date for the FAEDA_HIGH field as 10/01/2011, but in SAP it is not getting updated.
    Has anyone faced similar kind of issue. share you experience
    Regards,
    Ramprasad.

    Hi ,
    PLease find attached out XBP version
    XBP connection pool for SAP system ISU
      XMI interface version           : 2.0
    Since we have taken backup and restored the SAP Database, the CPs transport file already exists in the System.
    Basically what happens is
    So actually what is happening is, the CPS parameter FAEDS_HIGH expressions are  not used for due date calculation.. CPS just copies the source date-id to target id  and similarly for the due date based on the difference
    source_id variant date 01-12-2006   due date 02-12-2006  ( Next day)
    Target_id Variant date 25-12-2010  due date 26-12-21010  ( Next Day)
    I tried changing the Source date id from 01-12-2006 to 24-12-2010.
    Source Variant date 24-12-2010   due date 04-01-2011 ( 10 Days)
    Target Variant date 25-12-2010  due date 05-01-2011 ( 10 Days)
    Regards,
    Ram

Maybe you are looking for

  • Windows phone Nokia lumia 530 can't download any apps error code 80070490

    I have a new windows phone Nokia lumia 530. In trying to set it up I accidentally put a typo in my email address.I have done a use a different address as your primary alias, yesterday by making a new outlook account. However, I can't get the security

  • Not possible to save from Adobe Reader

    Hi friends Hope you can help me. I made a simple form using LiveCycle Designer ES2. When finished I saved normally as PDF. When sending via e-mail or copying to another computer...I´m opening the PDF in Adobe Reader to test if it works. All the field

  • Loss of Illustration (.AI) quality when converting FrameMaker to PDF

    Hello - We're running into some unpredictable problems when converting a FrameMaker file to PDF. Our images are created in Illustrator (CC), and inserted into FrameMaker (12) as a linked file. In Frame, the illustrations look perfectly fine. On expor

  • How to put dvd movies on to ipod classic

    How do you safely put DVD movies on to an ipod classic?

  • Partial redeployment of archived app

    Hello. So, as in subj: What I have: deployed war on weblogic, with a single jsp inside What I want: to redeploy only that jsp without redeploying entire war. When I try to use partial redeployment task with deltaFiles specified, I get DeploymentExcep