My USB Port does not Find my I POD

My USB port does not find my I POD. I have Installed all th elatest software.

Welcome to Apple Discussions!
Does the iPod show Do Not Disconnect? You may want to try resetting your iPod while it is connected...
http://docs.info.apple.com/article.html?artnum=61705
See if this link helps too...
http://docs.info.apple.com/article.html?artnum=61711
Finally, more details on the issue such as what your computer (if anything) does and what the iPod does.
btabz

Similar Messages

  • My usb port does not work on all user accounts

    My usb port does not power my iPhone or Apple keyboard on my main account, but if I switch users it begins to work
    Spring 2011 macbook air with the latest OSX as of Jan 2012.
    Thoughts
    THANKS
    Stan

    Try Resetting the System Management Controller (SMC)

  • USB ports does not work

    Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

    What driver have you updated?
    Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
    Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
    Have you done any changes to the system? (for example: self-install OS or changing OS)

  • E3200 - USB port does NOT work for more than one device

    We needed a new router that had the dual band connectivity as our previous router stopped working properly when we started using a baby monitor operating on the same 2.4 GHz. The choice was between E3200 and E2500. We chose the E3200 mainly because it also offered a USB port. We were hoping to use that to connect our printer and two external drives (thus bypassing our old desktop that's been working as a server). However, it turns out that the USB port on E3200 does NOT support USB hubs! So, you can ONLY use ONE device - either a printer or one external storage drive. That wasn't really clear at all from the description. I feel like we wasted the extra $50 hoping to get functionality that just isn't there. Can't believe that in this day and age, Cisco thinks we all have only ONE USB device we might want to connect to the network! The router itself is fast enough, but the extra $50 for a USB port that doesn't do much and some speedboost phantom ability is just not worth it. 

    Just to save time to you all, after numerous attempts to install a USB hub to my E3200,
    I wrote to Cisco Customer Service (live chat) and I specifically requested how to set up the usb hub or the virtual USB port and they said that they do not have a software to install a USB hub.
    Hope this help
    Massimo
    (Mod note: Edited for guideline compliance.)

  • One USB port does not work with external Disk or USB key

    Hello,
    Back to my iMAC there is 3 USB port. The second one - in the middle - does not work pluging an external Disk, an USB key or an iPOD nano. However it works well connecting a Wacom tablet.
    Is there an explanation to this behaviour ?
    More the keyboard is plugded on USB port 1 and the mouse on the keyboard. Time to time - especially at reboot - I have to unplugged the mouse and plugged again it in order it works.
    In advance thank you for your answers
    Regards

    Since it does not work for three different devices, I will assume it is not something simple like a faulty USB cable. Since it does work for one device, I will also assume that the port is (at least partially) working.
    As a test to narrow down the cause, I would try restarting from your Mac OS X installation disc (insert disc and restart with the C key held down).
    At the first Installer screen (after language selection), go up the menu bar. Under Utilities, select to run Disk Utility. Now, connect the USB drive into that center port. Does it appear in the Disk Utility sidebar?
    Please post back the result...

  • Back USB port does not work

    I noticed that one USB port(All other ports appear to be working)in the back of my Mac Pro does not work.
    Aside from taking my Mac Pro in for a repair, is there any other way to fix this problem?

    You can always try resetting PRAM and NVRAM…
    http://docs.info.apple.com/article.html?artnum=2238
    … and/or the System Management Controller…
    http://docs.info.apple.com/article.html?artnum=304123
    … otherwise no. You will need to take it in for repair and most likely a logic board replacement.

  • USB port does not work properly on Tecra M3

    I need help with my Tecra M3 USB problems.
    It has 2 USB ports. Awhile back the USB ports refused to recognise any non-driver USB memory sticks (I do not have any driver required sticks to try).
    Recently I've had to re-install my Siemens ADSL modem, driver etc. which runs via USB cable - LAN connection 2 then WAN miniport. And this is now causing a problem.
    1. the Modem LED tells me that it has power (it's a non-powered modem - Siemens C100-1)
    2. the link LED holds for about 10 minutes (whilst I'm online) then turns-off (although the properties of the connections tell me that they are still connected)
    3. other hardware - printer etc which is powered runs through the USBs OK.
    4. the modem seems to be working ok because I can use it with an iBook without problems.
    Could this be a USB driver problem? How do I find out? If so how can I fix it?
    Thanks

    Hi
    Thanks for the notes - you're probably right with your suggestions, I've only just read your reply.
    In the meantime I didn't have the patience so after much blood, sweat and tears - I re-installed XP.
    The support team suggestion I updated my Wireless LAN driver, which seemed a little strange because I have never used any wireless device and didn't mention I ever had a problem with it in my initial problem!!
    I'm going to back to a Mac when this Tecra is outdated :)

  • USB Port does not work W510

    Hello all,
    I am writing to you hoping that one of you may have an idea what's wrong with my beloved w510.
    A few hours ago the usb port (on the back on the right side) where I plugged in my external mouse stopped working.
    In the Lenovo part list it is referred to as "usb Sub card yellow".
    It just does not recognize a mouse nor any usb stick or external drive. I have already reinstalled the usb controller
    but it didn't make any difference. (I think the driver is only for the usb 3 hub on the left side of the notebook)
    when I plug in the external drive the lights of the drive start "flashing" same for the usb stick, but they are not recognized as drives..Same for the mouse. The lights go on, but nothing else works.
    Probably its all my fault, but I don't know what else I can try! Please excuse my bad English...!
    Hoping that somebody might be able to help me...
    Paul

    I have a reproducible test for this issue on my W510.
    1) Plug in a usb mouse into the rear usb port and ensure the mouse is working.
    2) Hybernate the system.
    3) Resume the system.
    4) Confirmed the mouse does not work.
    5) Disconnect and attach the mouse to one of the left usb ports and confirm the mouse works.
    6) Disconnect and attach to the rear usb port and confirm the mouse does NOT work.
    7) Restart the system and confirm the mouse still does NOT work.
    8) Shut down the computer (a full shutdown, not standby or hybernate).
    9) Power the system back on.
    10) Confirm the mouse is now working in the rear port.
    I can do these steps over and over with the same results regardless of whether the AC adapter is plugged in or not.  It appears that the data connection does not work after the system is resumed from a sleeping state.  I have the latest UltraNav driver and utility and the latest power management updates.
    Oh, and one more test.  Hybernate the system with nothing plugged in, then plug in a mouse into the rear usb port when the system is presently hybernated and then power the system back on.  The mouse will not work and rebooting doesn't correct it.  Only a full shutdown fixes it.

  • USB port does not work with a screen

    Dear All,
    My manager has a MacNook Air 10.8 and he is using a large 27'' Apple screen.
    He connects the screen to the MacBook Air with a cable which has 3 connections (USB, power, Tundetoh)
    He reported to me, that some time, he connect a mouse or a keabord to the USB, at the back of the screen, the two devise does not work, while it works when the devise are connected to USB port of the MacBook Air.
    His Macbook Air software are uptodate.
    Does you know how to make working the USB devise connect to the screen?
    And what does make those trouble?
    Cheers
    Pierre

    Is there special softwer for thunderbolt to update or install?

  • Right side USB port does not recognize mouse while in Vista

    Ok, heres the deal. I use a corded USB mouse with my MacBook Pro. I am right handed, so I usually plug the mouse into the right side USB port. It works just fine while I am booted into OSX, but while in Vista, the mouse is not recognized at all when it is plugged into the right side. The mouse still works on the left side port just fine.
    The weird thing is that I can still use that same right side USB port for my flash drive or iPod or anything else. Just not my mouse. Anybody else have this issue or have any input?
    Thanks

    Am I the only one with this problem? I am going to try to uninstall the mouse drivers in vista and then reinstall them and see if that does anything.

  • My usb port does not work

    I keep getting a message that my usb ports are disabled because the device plugged in is taking too much power.  I plugged in a passport 1 tetra hard drive.

    What kind of computer are you using? Are you plugging in to an external keyboard or other device or directly into the computer? Does it work if you plug it into a different USB port, preferrably one on the computer?
    Best of luck.

  • One usb port does not work

    one of my usb ports is fine the other will charge but not transfer any data.

    Thank you for your prompt reply. My Macbook is, unfortunately, older than one year and I have not AppleCare. I have been into the Apple store, they suggest me to buy an other laptop. Probably because the repair is more expensive than a new Macbook.
    Anyway I have not intention to chane the computer because is less than 3 yrs old, and it wors very well except usb.
    thank you again

  • USB port does not work

    that will disable a USB port on my Mac? anyone know how to fix it?

    Try a SMC reset. Google "SMC reset on Mac computer".

  • Iphone 4 makes an continuous intermittent vibration/buzzing sound when plugged into any of computer's 3 usb ports; does not show in itunes or Windows Vista device manager. No problem charging the phone with other power sources. What's going on?

    This problem happened intermittently in the past but now happens every time I plug in the phone. I suspect it might be a problem with my computer, an Acer Aspire 4530, perhaps with it's charging function via usb ports? The phone makes the same buzzing sound twice when I connect to other power sources, but continues when connected to computer. I have this issue even when the phone is 100% charged.

    This problem happened intermittently in the past but now happens every time I plug in the phone. I suspect it might be a problem with my computer, an Acer Aspire 4530, perhaps with it's charging function via usb ports? The phone makes the same buzzing sound twice when I connect to other power sources, but continues when connected to computer. I have this issue even when the phone is 100% charged.

  • Airport extreme usb printer does not show on macbook

    I have been trying to set-up a printer on a Airport Extreme through the USB cable.  However, the printer does not show under "Printers and Scanners" and the help on-line has not helped at all. 

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Maybe you are looking for

  • Creative mediasource and Burning Di

    I got Creative Mediasource with my Creative Nomad MuVo2 Player. I have "auto upgraded" the software and the plugins through the site. There doesn't seem to be any burn option, although the help file tells how to do it. I know that there are better bu

  • Payment advice generation  for payment already done ?

    Hi Gurus How can we create the payment advice for the payment already completed for a vendor. Payment program is ING-2 for Netherlands - banks transfer ( T) payment method. Print out prgoram is : RFFOAVIS_FPAYM Please let me know. Thanks Meenakshi.N

  • Java and flash wont work

    I went to try out the new icloud but when i logged in it said i needed java to run this. I have check the software update and everything is up to date so the computer 'thinks' java is working fine but it simply isnt there. Also another thing i am als

  • Issue about 'beadm create -p'

    hi When I create a be into a new pool with -p option, the following error was displayed: #beadm create -p testpool testbe Error getting boot configuration from pool testpool: Error while processing the /testpool/boot/menu.lst file([Errno 2] No such f

  • Twitter share button in notification center not working?

    I finally got my code for my free upgrade to Mountain Lion... I updated my computer last night and everything seems to be working well.  Other than the fact that they decided to leave the Facebook integration out without saying anything until last mi