My video app that is preloaded on the IPAD will not open. all I can see is a blank screen. Does anyone have any suggestions on how I can fix it?
My video app that is preloaded on the IPAD will not open. all I can see is a blank screen. Does anyone have any suggestions on how I can fix it?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]]
Similar Messages
-
Could you just look at this vi and tell me if i am doing anything wrong? I get errors that are different each time I change something. here are the inputs I am using
Output Side:
amplitude = 1
freuency = 50kHz
Sampling Frequency = 1MHz
3 of Samples = 200
Input Side:
Input Buffer 4000
trigger type = analog
pretrigger = 5
edge or slope = rising
scan rate = 500kHz
# of scans = 2000
Conditional Retrieval
mode = on
slope = rising
skip count = 0
level = .1
offset = 0
hysteresis = 0
So what we want to do is capture the ten
cycles of the 50k output pulse on the input and need to store that so we can plot it later, do you have any suggestions. we are using the PCI-MIO- 16E board.
Thanks,
Jarrod
Attachments:
InputOutput2.vi 88 KB1) Toss the sequence frames (no flames please).
2) Set you read and have it ready to trigger before oing the output.
3) After the output, go back and read the data that is waiting for you.
4) If you have errors tell us what they are and under what conditions they occured.
End of Ben's suggestions for now.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]] -
After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?
Welcome to the Apple Community.
Which OS are you using. -
I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?
You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years. -
I have been noticing videos on hulu, youtube and even itunes have been downloading slow and pausing in the middle of watching them. Does anyone have any suggestions on what I should do? Someone told me its my media player, but I am not very good at computers and don't want to download the wrong thing.
I have been noticing videos on hulu, youtube and even itunes have been downloading slow and pausing in the middle of watching them. Does anyone have any suggestions on what I should do? Someone told me its my media player, but I am not very good at computers and don't want to download the wrong thing.
-
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
I have an iPhone 5 and the camera won't focus. I don't know if there's anything that can be done. Does anyone have any suggestions?
Basic troubleshooting
reset
restore with backup
then as new
as required if still issues then it is possibly a hardware fault suggest you take iPhone to an Apple Store genius bar -
I was loading some CDs into my iTunes library when the disk drive refused to "suck in" the next CD. Does anyone have a suggest on how I might proceed?
Yes, that is a Catch 22. If you have another Mac you can connect your Mac to it in the Target Disk Mode, Transferring files between two computers using FireWire, and use Disk Utility on the second Mac to try to run the Hardware Test from there. Not sure if it's possible to a connected Mac though.
You can try this several times in the Terminal app and then see if a disk can be fully inserted:
Enter the following command followed by the Enter or Return key:
drutil eject
Do it several times and then try another disk. (A long shot). -
Why can't I connect to my work e-mail (Outlook 2003) using either the regular e-mail account set-up or Mail 2003? Does anyone have any suggestions?
I have yet to find an email server that does not work with Mail.app. Your solution will be to configure its ports and send/receive protocol according to the email server's requirements.
Try the Zimbra support forums. I found this excerpt from a relevant post:
http://www.zimbra.com/forums/users/46221-mac-mail-app-dont-work-outside-company. html
in which the following ports were suggested
ports 25, 465, and/or 487 to send mail.
port 143/993 to retrieve mail over IMAP -
Hi. I can't get the flash on my iPhone 5 to work. Does anyone have any ideas on how to troubleshoot this. Any help would be appreciated. Thanks.
Tap Camera App > switch to video > see if the flash will turn ON. If still problem, Restore your iPhone with iTunes on computer. See if fixed. If still problem, your iPhone has full Warranty with Apple.
-
Does anyone have any suggestions for password protecting e-mail on the i pad?
Does anyone have any suggestions for password protecting e-mail on the i pad? Other people sometimes want to use my i pad but I don't want them to have access to my e-mail (which is on AOL)
Presently you can password protect the whole i pad by having to put in a 4 digit code to open it, but once it's open whoever is using it has access to everything you have on it.Skydiver...that did it!! I shut the mail app from automatically opening and now I can sign onto my AOL acct. through Safari!! I had called Apple Care and had asked different peope in Apple stores about this and no one but you had any suggestions! YAY!! Thanks!!!
-
Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards VickiThe trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser. -
My iPhone is in recovery mode, But once it's done with the process a tab comes up saying there was something wrong restoring it (1015) error. Any suggestions of how I could fix this?
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
In other words:
The backup to which you're trying to restore was created with a lower or previos version of iOS than the one installed on your iPhone during the recovery. If this is the case then you'll be unable to restore your phone with that backup and you'll have to set your iPhone up as new. Or,
Your iPhone was/is jailbroken. If this is the case, there is nothing anyone here or at Apple can do for you. -
Since updating my iphone 4S it has started showing no service, i have gone into the apple store and they couldn't fix it does anyone have any suggestions?
They offered to value my iPhone and then put that money towards buying me out of my contract however I don't want to have to spend more money when my contract ends on august anyway.
Maybe you are looking for
-
Help on using Proxy Class ???
The proxy class that i am using currently not detecting (and not using ) my proxy .server I am using Naviscope proxy server on port 81 . Following is my code snippet: psvm (String a[] ){ try { Proxy proxy = new Proxy(Proxy.Type.SOCKS,
-
Netflix keeps giving me the error: Whoops, something went wrong... Unexpected Error There was an unexpected error. Please reload the page and try again. Error Code: S7063-1417.
-
How do you text a photo?
I can't figure out how to send a photo in a text. The only option is to e-mail the photo. Anybody know how to do this?
-
Hi All. I have created a multi currency application with only two currencies USD and Euro. But when i try to enter the data into the data forms through USD or Euro, i am not able to do that. But when i select local then it allows me to enter the data
-
Macbook backlight acting strange after Mavericks
I performed a clean installation of Mavericks the day after it was released, and ever since the backlight on my MacBook has been acting up. At first I thought it was just inactivity, but now today the backlight turned itself off, but the computer con