My volume is lock what do i use to unlock?
My Ipod Classic Volume is lock,just bought it today,what numbers will unlock volume?
There is no default combination. If you need to unlock the volume limit, you'll need to connect the device to your iTunes library and restore it factory settings.
Restoring iPod to factory settings
B-rock
Similar Messages
-
My ipad after installing ios 7 is locked and asking for passcode that i never gave it to. what should i di to unlock it. Thnx
Are your sure that the iPad is not asking you to CREATE a passcode. It will do this as part of the iOS 7 upgrade. If the device is truly asking for a passcode and it is now locked take a look at this Apple support page
http://support.apple.com/kb/ht1212 -
Respectable Apple suppot Team,
I need a help from you my problem is that recently i update my iphone software my last software version is ios 4.2 and i update with ios 6.0 through itunes,
when my iphone software was update my iphone was locked please tell me the solution who can i unlock my iphone.
I use Apple iphone 3GS 16 gb
Model No: A1303 FCC ID:BCGA1303A IC ID:579C-A1303A
Serial No: 86******YNP
Please resolve my problem i am very worry about my ipone
Regards,
Ahmad Salman.
<Edited by Host>Sounds like your iPhone was hacked to work with other than
the original cellular provider and the update relocked the iPhone
to that provider. You must contact that provider to see if they
offer unlocking and if you qualify. Only the cellular provider to
which the iPhone is locked can unlock it.
What does it say when you look at Settings=>General=>Carrier?
Where/how did you acquire this iPhone? Who is your wireless
provider?
Not wise to post your Serial Number in the clear - I have asked
the hosts to remove it. -
HT204053 my iPad is locked what should i do to unlock it ?
I have my iPad 2.5 mini serial no. F7RLMGKWFP84 locked while updating due to a failure in power supply sudden, after that the iPad request to activate with Icloud or Apple ID tried several occasion no result , said that my Apple ID has been disable for security reason , i tried to re create another one unsuccessful so how can i or where to go to get my iPad back to normal ? is there a solution ? if so can i access it ?
I find your post to be a little bit confusing, (activate with iCloud or Apple ID?) but in any event, you will need to sort out the Apple ID issue before you can proceed. Take a look at this.
Apple ID: 'This Apple ID has been disabled for security ... -
My phone is showing SIM Locked, what can I do?
My phone is showing SIM Locked, what can I do to unlock it?
Hi Tomastiger,
Lets get your sim unlocked! Which iPhone do you have? Is the device asking for the PUK or PIN code?
Thanks,
PamelaF_VZW
Tweet us @vzwsupport -
hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?
The iPhone has a feature called "Activation Lock" described here:
http://support.apple.com/kb/PH13695
Without that Apple ID, you will not be able to use that iPhone. -
I would like to unlock my iphone 4S
I have a locked iphone 4S (AT&T Carier). What must be done to unlock this phone to use the other carrier in my localOnly way is to contact the carrier to officially unlock the iPhone.
https://www.att.com/deviceunlock/client/en_GB -
What is the use for lock object and how to use the lock objects
Hi Guru's,
I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque function modules .hi ,
below are some minfo about lock objects :
Lock Objects
These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
Creating Lock Objects
Lock object is an aggregated dictionary object and can be defined by using the following steps:
o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
o Enter short text as usual and the name for primary table.
-Save
-Select Tables option
From this screen you can:
Select secondary tables, if any, linked by foreign key relationship.
Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
reward if helpful ,
Regards,
Ranjita -
Have Mac OS 10.7.4 installed on an iMac-3.1 GHz Intel Core i5...the Finder will not find files on Windows mounted volumes...what setting should we be using...tried the same/working settings as our iMac 10.6.8...did not work for 10.7.4!
Added note: We are tring to find files on Windows 2008 Server Standard...
-
My Mac mini time capsule is showing an error Time machine error, backup disk image "/volumes/data-1/.sparesbundle " already in use. I don;t know what this means, can someone help?
I had a similar problem and I solved it as follows -
In Time Machine - > I deselected time capsule Data Disk as a destination.
Then I pulled the power plug on the Time Capsule, twiddled my thumbs for 15 secs, plugged the power back in.
Went back t Time Machine -> Re-Added the Time Capsule Data Disk as destination. And then tested by selecting Backup Now.
All went well and the backup picked up from before the problem.
BTW - I also have a USB drive connected to Time Capsule that is an alternate disk for Time Machine to backup.
In Mountain Lion the GUI lets you add more than one Time Machine backup destinations very easily so I think it a good idea to have redundancy.
Hope this helps. -
The shell of my iPhone 5 is bent, but the screen is fine. I cannot use or press the volume buttons. What should I do about this or how can I fix it?
you should get it fixed
-
My iPod volume and lock button have not been working right ever since its battery died it did start to work again but then it stopped working. I'm very confused about how I should go about fixing this please help.
Try:
- Reset the iOS device As best you can). Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If not under warranty or abused
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Try fixing it yourself if you are up to it
iPod Touch Repair – iFixit -
Partition failed with the error: The target Core Storage volume is locked
partition failed with the error: The target Core Storage volume is locked
Hello everybody!
Please help me.
I'm using MacBook Pro (Retina, 13-inch, Mid 2014), Processer:2.6 GHz Intel Core i5, Memory: 8 GB 1600 MHz DDR3.
my computer i have divided in 3 drives: 1-Machintosh HD (Mac OS) 2-Bootcamp (Window OS) & 3-Data (drive for data storage).
I don't want to use Window OS on my computer anymore so I decided to delete drive Data (the third drive) & Window OS (the second drive).
I want my hard drive become a single drive back but when I was formatting, there were some problem display:
then i clicked ok and it displayed like this:
then i try to format or create new partition, it's nothing happen when press button apply.
my computer has storage space 256GB but now when it is happened like this my storage space is only 127GB only.
so please help me.. what so I do with this problem.
Thank you.!arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore -
"Volume is Locked" messages when Palm syncs
After repairing permissions and deleting logs and caches (with Onyx) and verifying preferences (with Preferential Treatment which found no errors), I am now getting "Volume is Locked" popups while I am syncing my Palm. The only new element in my mix is Preferential Treatment (which didn't execute anything as far as I know), so I'm trying to figure out what has happened and how I can fix it.
I did try to apply permissions to my hard drive ("Apply to enclosed items"), but I got an error code -36 "the finder cannot complete the operation because some data in "Macintosh HD" could not be read or written."
Any ideas?
P.S. I am logged in as administrator.Nolan, I just recently posted that same question here:
http://discussions.apple.com/thread.jspa?threadID=267326&tstart=30
To repeat, here's what I did to remedy that situation:
While logged in to my admin account:
1. Used NetInfo Manager to set the GID of my non-admin accounts to match the GID (501) of my admin account. I did this both in the Users section as well as in the Groups section of NetInfo Manager.
2. "Get Info" on Applications folder; Owner is set to "system" -- I didn't change that; changed Group to my admin account name; and Group Access to "Read & Write"; applied to enclosed items.
(I presume this will need to be repeated after running a repair permissions routine.)
I'm not sure if that was the right thing to do, but it worked. No more "Volume is Locked" error, but synching usually fails partway through with no error message. I'm considering this a separate issue from the "Volume is Locked" issue, because oddly enough this used to happen with Palm synch in OS 9 as well. (I just recently moved this Palm user from an OS 9 machine to an OS X Tiger machine.)
I tried deleting prefs and a few other things to no avail. The only way I've found to keep Palm synching smoothly is to occasionally remove the "User Data" file from the Palm users Documents folder. It seems to swell up to multi-megabyte size, whereas the "User Data Archive" file remains quite small. Again, this is EXACTLY what the user was experiencing in Mac OS 9 -- with exactly the same fix.
She does all editing on the Palm -- none on the computer, so her conduits are set to have the handheld overwrite the Mac each time. Hmmm... come to think of it, that may part of the issue.
Good luck, and please let me know if this works for you.
iMac iSight 20" Mac OS X (10.4.3) -
I forgot the password of volume´s limit what can i do?
I forgot password of volume´s limit, but i don´t want to restore my ipod what can i do?
Unlocking iPod
You can unlock iPod in one of two ways:
* Enter the combination on iPod using the same controls you used to set the combination. If you do not enter the correct combination, the digits onscreen flash red. When you enter the combination correctly, iPod will unlock and return you to the last viewed screen.
* Connect iPod to the primary computer you use it with (the first one iPod synced with), and open iTunes. When you disconnect iPod from the computer, it will no longer be locked.
If you can't unlock iPod using either of these methods, you can restore your iPod to factory settings. Please note that this will erase all data on your iPod. Afterwards, you can add your music and data back to iPod.
If you want to change the primary computer that your iPod is associated with, do this:
1. Restore your iPod. Warning: The restore process cannot be undone. All of your songs and files will be deleted. Always make a backup of your important data.
2. Connect your iPod to the computer that you want to be the primary computer.
3. Open iTunes and synchronize.
Maybe you are looking for
-
Little help needed on utl_file
Hi I am trying to write a small stored procedure for recording some information to a text file, and I need a little help. However, beforehand, let me give you what I have done: procedure create_record (order_id IN VARCHAR2) IS l_dir VARCHAR2(10) 'c:/
-
Maverick wont download. error message. Please advise
Each time I go to download the free update, it asks for my apple ID which I input and then after a few seconds an error message pops up saying there was a problem with the download try again later. Please advise a way around this. Thanks
-
How to configure cegetel mail account ?
i CAN ont manage to croate my mail accourt
-
Recently installed Microsoft office 2010 pro and certain excel files are very slow to open. Every other program opens just fine, however when I open certain documents they can take up to 2-3 minutes to open. If I try to open multiple excel documents
-
HT201269 my iphone 5s will not let me accept terms and conditions
My IPhone 5s will not let me access terms and conditions