My wifi is greey...i restored the system but nothing changed...what should i do?

my wifi is greey...i restored the system but nothing changed...what should i do?

If you Restored your iPhone with iTunes on computer, this supports hardware problem that WiFi Chip is damaged. If there is Warranty or AppleCare make Genius reservation or set up Service and take or send iPhone to Apple for resolution.

Similar Messages

  • TS1398 Wifi not responding after the software update. restored the system but still no luck.

    After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have ipod nano 6G.I was trying to restore it to clear all the data but it showed error 1439 and couldn't restore.I tried every method given in errors help page but nothing worked.What should i do?

    I have ipod nano 6G.I was trying to restore it to clear all the data but it showed error 1439 and couldn't restore.I tried every method given in errors help page but nothing worked.What should i do?

    Just in case (even though your symptoms aren't explicitly mentioned in the document), let's check to see if there's a LSP problem in play here:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • I forgot my password and have tried redownloading and restoring the software but nothing works

    I forgot my password and have tried redownloading and restoring the software but nothing works

    What happens when you place the iPod in recovery mode and then connect to your computer and restore via iTunes?  Error messages?
    To place in recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • HT201257 for me it doesnt work , I hold the D key , but nothing happened :( , what should i do to check my Hardware ?

    I have MAc book pro 15-inch, Early 2011 , I want to check my hardware , but when I hold the D key , nothing happened
    what should I do , if I want to check my hardware?

    Try option d.
    This will attempt to load an Internet version of Apple Hardware Test.
    If this still does not work, you must boot from your original Applications DVD. It is the one bearing the text "AHT version xxxx" on it.

  • TS4002 After the icloud update I have not been able to access any of the newly formatted icons including mail, is anyone else experiencing this.  I report to apple through the tab but nothing changes. My iPhone mail is unaffected.

    After the icloud update I have not been able to access any of the newly formatted icons including mail, is anyone else experiencing this.  I report to apple through the tab but nothing changes. My iPhone mail is unaffected.

    Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
    Has it returned to normal for you?

  • I restored my ipod touch because it had a white screen but after it finished restoring the screen was still white what should i do?

    i restored my ipod touch because it had a white screen but after i restored it the screen was still white what should i do?

    Sounds like a hardware issue. Make an appointment at an Apple Store.

  • Buy iDefrag or restore the system via TimeMachine? What's the better/faster way?

    Hi there!
    I'm thinking about either buying iDefrag or restoring my system.
    As I read on several websites there is no need to defrag Mac OS X because HFS+ automatically does (more or less). But: if the free space on the HD goes below 10% the OS can no longer defrag itself even if you delete files and free space increases again. Is that true at all?
    As I had only 40GB left out of 500GB I am now thinking about what to do. Is there any need to defrag or restore (iDefrag: 27€ / system restore: just some time)? Would any of those two options speed up my Mac? Or should I do nothing? I'm not sure if the Mac is slower than it should be at all.
    Thanks for your opinios and evaluations.

    ...if the free space on the HD goes below 10% the OS can no longer defrag itself even if you delete files and free space increases again. Is that true at all?
    No.
    Is there any need to defrag or restore (iDefrag: 27€ / system restore: just some time)?
    About disk optimization with Mac OS X

  • HT5139 I want to restore the system but keep files intact, what's recommended?

    My computer started crashing out of the blue with the use of aperture, not sure if the library is too big to handle or what. Later I realized that it's not only crashing with aperture but with anything else that's not firefox.
    With the use of aperture the computer crashes into a white background with vertical lines and a scary noise. With other programs goes into a black mode where I cannot get my background or any image back. In all cases I have to restart.
    Because I have a laptop I don't like to have the time machine plugged in all the time so my latest back up is not current. That's why I'm afraid to restore the HD from the time machine, I feel I'm gonna loose all the new info if I restart from a time machine few months old.
    Any helpful advise will be super appreciated as I need to resolve this to be able to work!!
    Thanks a lot!

    There aren't any viruses. I suggest you go the next step. Backup, erase drive, reinstall:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • TS1474 I changed my computer, now i want to sync mi iPod with the new one, it says that it cannot be used unlees I have the password but I dont, what should I do?

    I have my iPod since about a year, now I changed my computer, I already have all my documents in the new one, but when I try to sync my iPod with new computer its says that I need a password to use my iPod in Tunes, but it doesnt show a box to fill in or anything, I dont have the password, What should I do? I also dont want my apps to be erased.

    -Transfer iTunes purchases to the compuer by:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Transfer other music by using a third-party program like one of those discusssed here:
    Copy music
    - Connect the Ipd to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note that the backup that iTunes makes does not contain synced media like apps and music.

  • I keep getting the message ''Mozilla Firefox is not responding" and the system then freezes. What should I do to correct this ? Thanks.

    This freezes everything including my e-mail, or slows it down
    greatly. I also get this message with Internet Explorer. I have
    Verizon FIOS as my Internet connection.

    I just posted a similar problem below. You pointed me to the problem - thanks. My 'wrong browser version' was being caused by an old version number being left in the 'general.useragent.override' field. It would seem that this old version number would be deleted upon an upgrade, but the old version number is simply left in there. I changed the field from:
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.8.1.20) Gecko/20081217 Firefox/2.0.0.18
    to:
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.8.1.20) Gecko/20081217

  • I cant install an update to Firefox and cant remove the old version because a "Setup" pop up window "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" appears, reboots change nothing. What should I do?

    A friend said she downloaded an update to Firefox (a version of 6, I believe) but didn't install the update, but the desktop icon was gone. The only way to launch Firefox was from the Programs folder. When clicking on the Firefox file, a "Setup" pop up window appeared stating "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" Clicking "No" does not launch Firefox and clicking "Yes" reboots the computer, but nothing changes after restart and the same series of events keeps re-occurring. When clicking on the safe mode file, Firefox was launched. I went to "Add/Remove Programs" and found Mozilla Firefox 3.6.3. When attempting to remove the program, the same reboot "Setup" pop up appears, and the same non-results as previously described, persisted. I deleted all Firefox files and deleted the update set up .exe files. I again tried to remove the Firefox 3.6.3 program, with the same outcome as the previous attempt(s). I went to the Firefox website and downloaded the updated Firefox 7.0.1 set up .exe file, saved and ran it. When I reached the Setup Wizard page that prompts a "Standard" or "Custom" installation, I clicked on Standard and the same reboot pop up window appeared, again with no change after the reboot. So I have a Program installed (Firefox 3.6.3) with no files, and which can not be removed, an executed update/download .exe for Firefox 7.0.1 that can not be completely installed due to the failure to update by reboot problem. I'm out of ideas on how to try to resolve these problems. Any help would be greatly appreciated! Thank you

    Try a clean reinstall.
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    * Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • Dear all,     Since  Friday morning the Wi-Fi and Bluetooth of my iPhone 4S have not been wirking any more. They appear as "unactive". I restored the system, updated it to 7.0.4., but nothing changed. Can anyone please help me?

    Dear all,
    Since  wednesday  morning the Wi-Fi and Bluetooth of my iPhone 4S have not been wirking any more. They appear as "unactive". I restored the system, updated it to 7.0.4., but nothing changed. Can anyone please help me?

    Last night I wiped the phone and did a complete restore.  Lo and behold the wifi was working again after the restore finished.  GREAT.  30 minutes later went to look at the phone and no wifi again, great!
    So if my wifi chip coincidentally fried itself during the update, I supposed it coincidentally unfried itself during the restore, only to fry itself again later.  Clever chips these.

  • I cannot open Adobe photoshop CS2 which I was using 10 days ago.  Can I restore the system to before 10 days, so it will work again?

    I cannot open Adobe photoshop CS2 which I was using 10 days ago.  Can I restore the system to before 10 days, so it will work again?

    The hatter wrote:
    Rosetta can have a 2GB RAM "tax" to manage PowerPC code as well as how that affects performance.
    I think real world performance shows both statements to be wrong; consider this:
    If that were the case, how come Apple does not include that information in its Snow Leopard installation requirements, since Rosetta is an optional install?
    Also, running a PowerPC app on an 2011 i7 Mac with Snow Leopard will run faster than running that PowerPC app on a PowerPC Mac.

  • My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?"

    My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

    Hello buddyacw
    You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for