MY WIFI IS NOT AVAILABLE I HAVE TRIED To RESET NETWORK FROM SETTINGS?
MY WIFI IS NOT AVAILABLE I HAVE TRIED TO RESET NETWORK FROM SETTINGS? can any one help me??
Hi rafisaudi,
If your WiFi is unavailable or greyed out on your iPhone, you may find the following article helpful:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Regards,
- Brenden
Similar Messages
-
Since updating my iPhone 4s to ISo 6 my wifi setting is a pale grey and can not be turned on. Have tried restore, reset network settings and updated to ISP 6.0.1, anyone have any suggestions as this is really frustrating.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Mac and iPad connect to wifi, iPhone will not. I have tried all resets besides the "erase all contents and settings" and nothing seems to work. Any suggestions?
http://support.apple.com/kb/HT1414
I would honestly try this. It is how to restore your phone and see if it works. -
iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?
Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards. -
my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??
See Here > Device Not Recognised http://support.apple.com/kb/TS1538
-
After upgrading to the new version everything seems to work well except my back/forth button on the browser are visible but grayed out and not functional. I have tried all of the suggestions in help and am unable to bring them to life. Very frustrating to use a browser with out these functions. I run 4 websites and it is maddening to have to keep reloading the sites just for simple work.
I have to have these working or will be forced to use another browser. I liked the old FF much better. I can not tolerate this much longer.I notice from your system specs that you're running a very old version of Flash. Could you try updating to the latest one which is 10.2.159.1 It also contains a patch to fix a recently discovered [http://www.h-online.com/security/news/item/Adobe-releases-security-update-for-Flash-Player-1228930.html Zero Day exploit]. You can get it from here: http://get.adobe.com/flashplayer/
Have you experienced any unusual events watching Flash videos lately? It's possible that you may have been a victim of just such an attack. It might be worth doing a malware scan using this well-known scanner from http://www.malwarebytes.org/ The free version is more than adequate to eliminate any current threats. -
Can someone help me with my apple id reset to get my iphone to work please?
Enter your correct Apple ID and password.
If you bought the phone used you have encountered activation lock installed by the prior owner. You will not be able to get past the activation lock without the proper credentials. Contact the prior owner. If the prior owner does not know the details the device is probably stolen and you have lost your money.
If you bought the phone new from Apple take it back to the store with your receipt so that Apple can help you. -
Ipod touch will not turn on, have tried to reset any other ideas?
My ipod touch will not turn on, I have followed the apple fault finding and it will not reset either. Any other ideas?
Try to connect in recovery mode, explained here: iPhone and iPod touch: Unable to restore
-
We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up
From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions. -
hello guys i wanted to ask u about my ipad wifi is not turning on and i have tried to reset the network but still is not working please i need ur help
Thank you. I will try your tip. And if it works, I'll give you 10 points . But now its been charging for hours and its still the same . But thank you!
-
Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?
iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it. -
my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.
Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
When my macbook goes to sleep from non activity when I return the wifi is not on. When trying to log back onto my hub it says it is out of time and I have to reboot each time. Most annoying, any solutions please?
If you are not using data and the iPhone goes to sleep, it will automatically drop the wi-fi, and will not reconnect until you wake the phone up. That is the way it is designed. The only way around that is to turn off cellular data while at home and on wi-fi.
Cannot answer the xbox question since this is an iPhone forum and I would have no idea. -
My ipad has a black screen and the apple logo and won't do anything else. I have tried to reset to no avail.
Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Can I use USB 3G data Modem on my iPad MINI as wifi is not Available everywhere?
Can I use USB 3G data Modem on my iPad MINI as wifi is not Available everywhere, I have just purchased one.
You can't connect a USB 3G dongle to an iPad, it won't be recognised. You can use an iPhone as a personal hotspot for the iPad (if you phone carrier supports it), or you can get mifi devices which act as mobile hotspots
Maybe you are looking for
-
Hello, We're using Sharepoint 2013 to manage documents. I was editing a Sharepoint doc in excel and saved my work several times before finishing, however I did not check the doc back in upon completion. Instead, I created a PDF version (makes printin
-
Sometimes messages are not sent
Sometimes Mail does not send an email message, which is problematic of course, but the real problem is that the message is nowhere to be found, except when rebuilding the Outbox (or by looking into the Outbox.mbox folder in Finder). Some lines in the
-
How can show the Chinese character in Oracle Report Graph on RedHat Linux?
The OS is RedHat Linux and I set NLS="SIMPLIED CHINESE_CHINA.ZHS16GBK" in %ORA_AS_HOME%/bin/reports.sh The report file is a JSP Web Report, including Chinese character in web HTML text and graph. Now Chinese character in HTML text can be displayed co
-
Connecting old Fire wire 400 External Drive with no FW 800 ports, how?
I have a fire wire 400 drive and so i switched to mac pro which doesn't have 400 things. so i can't connect it. ANyway to do it?
-
Security in essbase at the database level
i need to edit users ability to access various databases within an application in essbase. the user has been provisioned in shared services to the app, but, it appears to further restrict particular databases, that has to be done in essbase. right? i