My wifi problem -- and solution

I realised this morning that my new iPhone has been using EDGE the whole time. You can easily see across the top if you are connected to wifi (it uses the airport-style signal strength symbol) or EDGE (symbolized by a square icon with an E in it).
I didn't realise that. Ah well... When I looked at our WiFi network and reviewed the details, I saw we weren't connecting at all. I have seen there are a few posts on the apple discussion forums about encryption problems--and we use WEP encryption. So, I told the iphone to forget the network, then reconnected and specified "WEP ascii or hex" instead of "WEP password" for the password.
Now, everything seems to be fine. EDGE is OK for when you're out and about, but at home (or work!) I'd want that wifi actually working.
MacBook Pro Mac OS X (10.4.8) 2 GHz Intel Core Duo

I have an older Airport Extreme base station (g not n?). I have tried setting both a WEP or a WPA/WPA2 Personal password. However, even though all of these password settings work with 2 different MacBook Pros, I cannot connect to my iPhone with any password. The only way I can get wireless on the iPhone is to set the security on the base station to "none" and thus use no password. Thus, my only protection from the outside world is that I have a closed wireless network. I also tried using the WEP HEX/ASCII option on the phone (with a WEP password) but that does not work either. My passwords are just normal passwords with a mix of letters, digits and special characters (e.g. $), currently 13 characters all together. I don't understand what people are talking about when mentioning that passwords must be of a particular length and only have letters and digits and then entering the password starting with an extra $. Using Macs of various types with my Airport Extreme base, I have never done this. Any suggestions? This is important to me since it appears that I have no AT&T reception at my home even though the AT&T coverage tool (which I used before purchasing the iPhone) said I should get moderate coverage.

Similar Messages

My Iphone/ Ipod touch 4th gen WiFi problems and solution

Just wanted to let people know the problems that I had with my 4th gen Ipod touch and Iphone 4 WiFi connections (and my solution).
I was having consistent problems with my WiFi connection at home - my devices were connecting fine to the router and apparently the signal was full strength; however, nothing was working properly (internet, itunes, app store). To be specific the devices would work for 5-10 minutes but then the connection would start to falter. My other wireless devices were working fine (HTC Hero, laptops etc.) - just the ipod and iphone seemed to suffer from this signal problem (although the router was always apparently connected).
Obviously, I read countless forums to try and diagnose the problem. There seemed to be a litany of possible causes and I tried the following to resolve the issue:
- updated router (Netgear WGR614 v6) firmware
- rotated wireless encryption (WEP/WAP/nothing)
- changed router channel
- reset router power
- reset network settings on Apple devices
- changed g and b settings on router
Nothing seemed to work so I began to question the hardware i.e. the router (which I knew was working from my other devices) and the iphone/ipod.
I tested my iphone and ipod on other wireless networks (McDonalds in the UK has free WiFi) and found that, in contrast, they worked fine on other networks. I had read a few posts from people saying that my router was perhaps too old. So as a last resort I bought myself a new router (Netgear WNR2000 v2). I was loathe to do this earlier in case it didn't work, since reasonable spec routers are £50
Anyway it worked ... straight away. I have tested the new connection at home using this SpeedTest app. D/load = 9.01 Mbps, U/load = 0.46 Mbps, Ping 65ms. The router is using the full encryption (WAP2 something ...) and N connection.
As you can probably tell I'm no WiFi expert - I just wanted to post this in case people are having similar issues with older routers. I wasn't able to find any definitive advice and solutions from other users so I though I'd contribute here, which I guess is the first port of call for new Apple users, like me
I bought the new router 10 days ago and have been enjoying my full speed connection ever since - touch wood. Hope this helps.

Sounds like an intermittent contact problem some where eon the logic board. Hard to trace down and fix

When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.

When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.

I can't follow your meaning. What does connect directly to your ISP mean?
Did you mean turning off WiFi but turning on Cellular Data on your iPhone?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

CRM Solution database How to main the problems and solution types

Hi
Can anyone tell me how to maintain problems and solutions in the CRM solution database , after setting up the TREX and SAF for the IC webclient .
we are unable to maintain the problem types with 1200 words in the problem description in IS01 Transaction We are unable to assign the codes to the problem type at the time of maintaining the problems and solutions in the IS01 transaction for solution database . after maintaining the problems and solutions the SAF indexing with full compilation and cluster compilation . the list of documents were showing successful status but when we search by the attribute type in the knowledge search the message is showing no search refinement found .kindly expedite the solution for the the above description
The TREX connectivity has been established successfully and the SAF is configured successfully without any errors in it but but we are unable to search the text based and attribute based search in the IC webclient knowledge search .
Regards
Vikas dinaker

Dear Vikas,
Kindly check C13_BB_Config guide as service marketplace.
It says in section 3.1.5.2.3 on page 57, the below mentioned paragraph.
3. On screen Create Problem maintain the following data:
Be sure that the descriptions of the following problem(s) and solution(s) are defined in all languages that you want to use (e.g., in the E-Commerce Internet Customer Self-Service).
4.Choose Enter. The default parameters are filled; please also see the NOTE following this description.
5.Enter the problem description listed in the box below. The first line should not exceed 40 characters, for this is like a short description of the problem that will be displayed in the first line of the hitlist in the search.
hope this helps
Amit

CD-DVD ( Optical Drives ) Common Problems and Solutions

CD/DVD Common Problems…
Dear friends, I have noticed that many laptop users suffering from some common problems. cd/dvd ( Optical Drive ) problems are one of them.. so here I am trying to collect and make available solutions related to cd/dvd drives . Almost all solutions are already advised in previous posts but these are all are in one post. We all are here for sharing problems and solutions. I always appreciate all corrections and additions. In first look optical drive problems seems like hardware problem. These problems have hardware/software both possibility so I request to administrator, to make available this post in both ( hardware – software ) sections. I put only solution links to save forum’s valuable space.
CD-DVD drive called an OPTICAL DRIVE.
CD-DVD discs called A MEDIA
There are 2 possibilities for optical drives problems.
Widows based problems
Hardware based problems
First here are windows based few common problems
All windows based solutions are from Microsoft Corporation.
Your CD drive or DVD drive is missing or is not recognized by Windows or other programs - Windows XP...
Symptom:Your CD drive or DVD drive is missing or not recognized by Windows or other programs, so you cannot play or access a CD or DVD
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows V...
Symptom : You upgrade a computer to Windows Vista or install Windows Vista Service Pack 1 or you install or uninstall applications that have a CD/DVD filter driver.
When you restart the computer, the CD drive or DVD drive no longer works as expected
Your CD or DVD drive cannot read or write media
Symptoms : Your CD or DVD Drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to by your CD or DVD drive
You receive one of the following errors:
A class specific or device specific driver is missing or corrupt
A CD or DVD drive cannot be found or is not connected
The CD or DVD drive is experiencing a problem that prevents it from working properly
The CD or DVD drive is not accessible via an assigned drive letter
How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or ...
Symptoms:
The disc label does not appear in Windows Explorer.
The contents of the disc do not appear in Windows Explorer.
When you insert the disc in the drive or when your computer tries to read the disc,the computer stops responding.
You cannot eject the disc from the drive.
The computer takes a long time to read the disc.
CD drive or DVD drive errors may cause unexpected program crash in Windows XP
Symptom : Error
"Program_name has caused and error and must be closed. We apologize for the inconvenience. If you were in the middle of something, the information you were working on might be lost. Please tell Microsoft about this problem. We have created an error report that you can send to help us improve rogram_name. We will treat this report as confidential and anonymous. To see what data this error report contains, click here."
You cannot write to a DVD-RAM disc that is in a DVD-RAM/CD-RW combination drive
Symptom : "The disc in the drive is not a writable CD or it is full. Please insert a blank, writable CD into drive D:\, or insert a disc with enough free space to hold all the files you have selected for writing to CD. "
DVD-RW Drive Appears in My Computer as a DVD-R Drive
Symptom : "If your computer has a DVD-RW (digital video disc rewritable) optical drive, the DVD-RW icon may not appear in My Computer. Instead, your DVD-RW optical drive may appear as a DVD-R (digital video disc recordable) icon."
Windows XP does not recognize a DVD-RW disc
Symptom : When you insert a DVD-RW disc into the DVD drive of a Microsoft Windows XP-based computer, Windows XP does not recognize the disc. For example, you do not see any files on the disc.
You may also experience this problem with DVD-RW discs that have been formatted as VD-VR. Some consumer DVD recorders use the DVD-VR format.
CD-R drive or CD-RW drive is not recognized as a recordable device
Symptom : When you try to burn data to a CD-R or a CD-RW, you do not have the option to send data to the CD drive.
When you view the properties of the CD-R drive or the CD-RW drive, you notice that the Recording tab is not displayed in the CD Drive (drive_letter: ) Properties dialog box, where drive_letter is the letter of the CD-R drive or CD-RW drive.
Note To view the CD Drive (drive_letter: ) Properties dialog box, click Start, click My Computer, right-click the CD drive that you want, and then click Properties.
Additionally, you may receive the following error message:
There is no disc in the drive. Please insert a writable CD into drive.
CD-ROM Drive May Not Be Able to Read a UDF-Formatted Disc in Windows XP
Symptom : Your computer cannot read some or all files on CDs or DVDs that were recorded through the use of the Optical Storage Technology Association (OSTA) Universal Disk Format (UDF) file system standard. Symptoms may include:
The disc is not recognized at all and shows up as empty.
Error messages such as "The file or directory is corrupt and unreadable" appear when you try to access files in Windows Explorer.
Some portions of a DVD-video may not function correctly
How to troubleshoot issues that occur when you write data to a CD-R or CD-RW optical disc in Windows...
Symptoms :issues that occur if you write data to CD-R and CD-RW optical discs and how to troubleshoot issues with CD-R and CD-RW drives.
These are most common issues related to optical drivers.
Tomorrow will try to explain hardware possibilities.
All friends suggestions and correction are highly advisable..

I upgraded to W7 and everything works fine except two things.
I followed the
http://h30434.www3.hp.com/t5/Operating-systems-and-software/Windows7-Upgrade-Guide-for-dv6000-dv9000...
process and still have the problem DVD not under device manager
DVD spins when booting but after W7 splash screen no longer functions, it did work prior to upgrade.
I have seen many listed problems but no solution. my device is a TS-L632N and based on the most recent drivers i can find still not working. I looked in the registry and it is not listed under cdrom or
{4D36E965-E325-11CE-BFC1-08002BE10318}
there are no upper or lower filters

Best Practice on Knowledge Management, IS01 Problems and Solutions

Been Playing with KM and looking for insight from other users (will give points) using it for ICWC.
We have mulitple product lines where we have documents with Q & A's in each line. As I look at moving that into CRM via IS01, I am looking for any Best Practices or recommendations.
1. Create a single problem and solution for every question.
2. Create a single problem (list all questions) for every product line and create multiple solutions that are linked to that problem (solution for each question)
3. Is LMSW a good tool for loading data in mass?
The ICWC search brings back the 1st line on the problem & solution on the screen, meaning I try to limit the characters used so it fits on the ICWC screen, a long 1st line on the problem doesn't allow the agent to see enough of the solution without opening the link.
Thanks,
Edited by: Glenn Michaels on Jun 14, 2008 9:52 PM

Hello Glenn,
If it helps, here's a scenario about KB on my company system.
Our call center supervisors are the persons who creates problem and solutions in our KB. They maintain it but don't use IS01 transaction. They use instead People Centric BSP's for Problem s and solutions (they're integrated in IC webclient with the help of transaction launcher).
Normally, they prefer creating multiple solutions to one problem, instead of single problem - single solution method. This because some questions may have multiple solutions. They could put all the solutions text in one solution object, but for maintainance purposes we think it's better to create multiple solutions object to every solution text, because if one solution becames obsete, all we have to do is unlink instead of changing the text.
We don't use LSMW. I don't have much experience in LSMW, but if you use it, be careful to respect KB interval numbers for problems and solutions. We implement an initial set of problems and solutions in our Development system, and we passed to the Quality and Produtive system, with the precious help of sap note '728295 - Transport the SDB customization between two CRM systems' and '728668 -Transport the content of the SDB between two CRM systems'.
One cool idea to use the KB is using Auto-suggest feature. The idea is to integrate the links between problems and solutions with, for example, service ticket categorization, using BSP Category modeler, and when an agent classifies a ticket, at the top of the screen it will appear the suggested solutions/problems for the classification choosen.
I think that's all.
Sorry for my poor english. Today I'm not feeling very inspirated
Kind regards.
Edited by: Bruno Garcia on Jun 17, 2008 9:51 PM (added note 728668)

Solution Database - Maximum number of Problems and Solutions

Hi everyone,
I´m new at CRM and I was wondering if you could help me sharing your knowledge and experience on this.
I completed the SAF and solution database configuration , I was wondering if there´s a maximum number of problems when creating problems and solutions on IS01? Also Can I have 2 or more solution data bases (with different problems and solutions) assigned for a business role?
comments are appreciated
thanks!

http://help.sap.com/saphelp_crmhana/helpdata/en/a4/9fa471b41f44828da6ea1490f02e2b/frameset.htm
What about this?
Best regards,
Thomas Wagner

Review Problems and Solutions after upgrade question

I have recently migrated from WSS 3.0 to Sharepoint Foundation 2010. I now have a the following messages in Sharepoint Admin.
The SharePoint Health Analyzer has detected some critical issues that require your attention. View these issues.
Accounts used by application pools or service identities are in the local machine Administrators group.
Using highly-privileged accounts as application pool or as service identities poses a security risk to the farm, and could allow malicious code to execute. The following services are currently running as accounts in the machine Administrators group: SharePoint
Central Administration v4 (Application Pool)
SPTimerV4(Windows Service)
Built-in accounts are used as application pool or service identities.
Using built-in accounts like Network Service or Local System as application pool or as service identities is not supported in a farm configuration. The following services are currently running as built-in identities on one or more servers: SPSearch4(Windows
Service)
The last time I tried to correct this type of issue I wound up creating a problem that I was unable to correct. I had to reinstall Sharepoint. How critical is this and what is the best way to make these changes without causing larger problems?
I am using two accounts to run the services/pools/etc. Well 3 if you count the Local System. Account #1 and #2 are not in the Admins group. They were when I installed everything but I have since removed them.

Hi Poly,
I recommend to follow the steps below to see if the warning message remains:
1.   Re-run Rule Definition.
In Central Administration, go: Monitoring > Health Analyzer > Review rule definitions. On the Health Analyzer Rule Definitions page, in the Category: Security group, click the rule definition link, Accounts used by application pools or service identities
are in the local machine Administrators group. Click the Run Now button, then click Close. Wait a minute or two, and then return to Review problems and solutions page.
2.   Reset Farm Service.
Login to the local machine hosting the farm Central Administration application. Go to Start > Administrative Tools > Services and scroll down to the SharePoint 2010 Administration service. Double-click this service, select the Log On tab. If not selected,
select the This account option and then enter or re-enter the farm account. At the warning prompt, "The new login name will not take effect until you stop and restart the service," click OK. Stop and restart the service, and then
click OK. Wait a minute or two, and then return to Review problems and solutions page.
3.   Reset the Farm Timer Service.
Login to the local machine hosting the farm Central Administration application. Go to Start > Administrative Tools > Services and scroll down to the SharePoint 2010 Timer service. Double-click this service and select the Log On tab. If not selected,
select the This account option and then enter or re-enter the farm account. At the warning prompt, "The new login name will not take effect until you stop and restart the service," click OK. Stop and restart the service, and then
click OK. Wait a minute or two, and then return to Review problems and solutions page.
More references:
http://alstechtips.blogspot.com/2013/12/health-analyzer-accounts-used-by.html
http://technet.microsoft.com/en-us/library/hh344224(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ff805066(v=office.14).aspx
Victoria Xia
TechNet Community Support

Knowledge Search - Problems and Solutions

Hi,
I am creating Problems and Solutions (in IS01). But that is not visible in knowledge search in IC Webclient.
I have also done compilation in SPRO -> CRM -> Enterpise Intelligence -> SAF, but not getting the result.
Please Help.
Regards,
Ankush

- Your IC WebClient Profile should point to the Knowledge Management Profile which point to the Configured Knowledge Base ( Problems and SOlutions )
- I hope SAF Diagnosis Tool looks good ( CRMC_SAF_TOOL )
- I hope you have gone through the Best Practice Document ( help portal ) for Interaction Center which tells step by step ways to configure Knowledge Base

HT5731 I am unable to delete unwanted songs from my wish list. Does anybody else have this problem and/solution. Thanks

I am unable to delete unwanted songs from my wish list. Does anybody else have this problem and/solution. Thanks

I have the same problem, and other people have also posted about it. I assume that there is either a bug with the current version of iTunes and/or that there is a problem at Apple's end

IOS 5 Upgrade Problems and Solutions

Thought it might be good to have a repository thread for folks having difficulty with the upgrade to iOS 5.
Here's what I experienced:
The download was fast (fast wired internet) but the install was long and buggy. For some reason many of my apps didn't show up after the initial install and my music/podcasts/videos were all missing.
Turns out the phone had a large block of memory reserved (listed as OTHER) after the inital install. I did a sync without music to get the missing apps back on the phone, put the missing apps back in their proper folders, then synced one more time to put my music/podcasts/videos back on the phone. All was fixed!
Anybody else have problems and solutions they can share?

bbcamaro68 wrote:
Hey i was having the same issues i tried contacting apple but got no where, it wouldnt let me restore and back up i keep getting the same error message.
went on my iphone under settings and restored back to factory settings, (not data just the factory settings for iphone)
and this fixed the problem, ios 5 update with no further problems.
hope this helps.
-Jim
Jim-
Was this just for the Interal Error with no number reference or for the 3200 reference? I tried this with the plain Internal Error to no avail. I have an appointment with Apple in 45 min so hopefully I can return good news. Here's hoping!

Problems and solutions for 9i DB R2 install on Redhat Linux AS 2.1

Installing 9iDB R2 9.2.0.1.0 on Redhat Linux Advanced Server 2.1 (aka Redhat Enterprise Linux (AS))
and applying patchset 2 (9.2.0.3.0)
This is a certified platform but I hit many problems getting the install to work. Here are the problems I hit and how I solved them.
Note: This is not intended to be a install for dummies but just an account of all my problems and how I overcame them. I spent 10 hours on this certified install (mostly looking for solutions to the problems I was having)
I had a Intel Pentium 3 with 512 Meg RAM. (test machine)
1. Install Redhat Linux
2. Install Sun JDK 1.3.1 (this is not actually required for this install. I installed it as I was planning to install 9iAS after this)
3. Install binutils-2.11.90.0.8-13 (also not required. I installed it for 9iAS)
All other components were ok on my Redhat Linux install (i.e. kernel version, glibc)
4. Create oracle user with dba group
5. Create oracle home and oracle base directories. Ensure these are owned by oracle with rwx
6. Set kernel parameters and make sure that they are initialized every startup:
I managed to locate this script in the Redhat document called
"Deploying Oracle9iTM on Red Hat Enterprise Linux AS"
create a file called oracle.sh in /etc and give it execute permissions
oracle.sh
#!/bin/bash
# configures kernel and system parameters for Oracle9i R2
# File handles
echo 65536 > /proc/sys/fs/file-max
ulimit -n 65536
# Shared memory
# The default SHMMAX value is too low and likely to cause a failure during
# database creation. SHMMAX should be equal to half of your system's physical
# RAM.
# The default is for 512 MB of RAM. Replace the default value as appropriate
# for the amount of memory in your system, i.e.,
# 512 MB : 268435456
# 1 GB : 536870912
# 2 GB : 1073741824
# 4 GB : 2147483648
echo 268435456 > /proc/sys/kernel/shmmax
# It is generally safe to leave these next two values as they are
echo 4096 > /proc/sys/kernel/shmmni
echo 2097152 > /proc/sys/kernel/shmall
# Semaphores
echo 250 32000 100 128 > /proc/sys/kernel/sem
# Sockets
echo 1024 65000 > /proc/sys/net/ipv4/ip_local_port_range
# Processes
ulimit -u 16384
----EOF---------
then...
# chmod +x /etc/oracle.sh # make executable
# . /etc/oracle.sh # apply changes now
edit /etc/rc.local to ensure this is run on startup
append to /etc/rc.local
# configure system for Oracle9i R2
bash /etc/oracle.sh
--------EOF--------------------
7. create a generic oracle environment setup script for all users to run
create the file /etc/profile.d/oracleenv.sh
be sure to change the variables to your environment (ORACLE_BASE, ORACLE_HOME and ORACLE_SID)
oracleenv.sh
# Configures the user's environment for Oracle9i R2
ORACLE_BASE=/opt/oracle
ORACLE_HOME=$ORACLE_BASE/product/9.2.0.1.0
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
ORACLE_SID=orcl
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$PATH
export ORACLE_BASE ORACLE_HOME ORA_NLS33 ORACLE_SID LD_LIBRARY_PATH PATH
----EOF---------
chmod 755 /etc/profile.d/oraclenv.sh
This file will run when a user logs in.
8. Install oracle DB
This took me quite a few attempts.
The first Install I did I received the error jre was not found. This issue seemed to be relating to the fact I was not installing on a Pentium 4. Oracle was looking for the jre in oracle.swd.jre/bin/i686 (and .../lib/i686) when some of the files were placed in i386 and java was looking in i386. This created a real mess. I had encountered a similar problem on a previous install on a different platform. I found articles of people that tried to just link the directories with symbolic links but this never worked. I tried my own version but also failed.
The solution that worked for me was to de-install, remove all the oracle directories created by the install (this part I had always done) AND also delete the file /etc/oraInstl.loc. This makes the Installer truly believe this is the first time Oracle has been installed on this box. My jre problem disappeared after that. (I don't know why it just didn't work in the first place...)
The next error I received was an ORA-03113 when creating the database (in the dbca). (It was actually at this point that I found the document from redhat as mentioned in my set 6 above) I also noticed that when running the install of the database, the default was for Oracle's SGA to use 70% of the available memory on my machine (I have 512M so that's 360M). Oracle instructed me to set shmmax to around 240M. This may be why the database creation failed as I thought the shmmax parameter needed to be larger that SGA. Anyway, I reduce the SGA to 50% and it worked.
This error may also have been caused by the kernel parameters not being set properly after a reboot so if you implementing stop 6 above. You may never get this problem, hopefully.
8. Install the universal Installer 2.2.0.18.0 (a prerequisite for installing the patchset 2)
You will need this to install the patchset 2. You can get it from metalink by searching for the bug number in the patch area. Search for bug/patch number 2878462 in patches. (37Meg for linux intel)
(Did you know that when oracle refer to a bug number, you should treat this as a patch number? General the bugs are not available for public viewing but oracle create a patch of the same number as a placeholder. So don't search for the bug in the site search or by doc id, go straight to the "patches" area and enter the bug number as a patch number, you'll have more success. - I only found that out today after struggling with metalink for the last 4 years)
9. Install the patchset 2
I downloaded patchset 2 (which will bring my DB version to 9.2.0.3.0) (220Meg). There is a special symbolic link command you'll need so make sure you remember to do this.
i.e.
$ cd $ORACLE_BASE/oui/bin/link
$ ln -s libclntsh.so.9.0 libclntsh.so
10. Migrate your database
I could not get this to work. The docs says I need at least 150M shared_pool_size and 150M Java_pool_size before running the startup migrate. As I only have 512Meg RAM (and shmmax set to 230M) I did hold much hope that this would work. I started my DB without the migrate option just to see if it would actually open with 300M in my pools. It did, so I shut it down and restarted with the migrate option. After 5 minutes of heavy processing (I still have an empty database) my server appeared to hang. I decided to restart the machine and just re-create my DB with the new patchset already applied. I delete my $ORACLE_BASE/oradata/<sid> directory and remove the entry from /etc/oratab and re-created my DB. This worked fine :)
I hope this document helps you for your install. Please drop me line if it does help and I'll endevour to write more documents like this one.
Please drop me a quick line at [email protected] even just to say "thanks".
I will include a few keywords here to help the searches find this document. (mainly the keywords I searched on and failed to find a doc like this one)
ORA-03113 ORA-3113 03113 3113 jre was not found jre not found i686 i386 i586 9iDB R2 9.2.0.1.0 9.2.0.3.0 Redhat Advanced Server 2.1 AS Enterprise Linux (AS) RH install error installation errors oui dbca problem issue
Good luck,
Tim Daniell.

The trick that worked for me was on a 2nd attempt. I installed once, let it fail with "jre was not found", de-install through the installer, delete all directories and files under $ORACLE_BASE (including $ORACLE_HOME), and also delete /etc/oraInst.loc.
I don't know why it fixes itself with this. Oracle say this is an unresolved bug 2726268 that lies in the installer. This is still unresolved by Oracle (as at 02-June-03) therefore it is not a published bug/patch. If this doesn't work, I suggest you open an iTAR and see if Oracle has any more suggestions for you.
Cheers,
Tim.

Wifi problems and 3G/4G after 5.1.1 iPhone4s

i have realy problems if i have the WIFI enabled and i come out of the WIFIit will not work in the 4G mode and vice versa...
i have to reboot the iphone and disable the WIFI than it works.
i saw many users have the same problem and also with bluetooth....seems there is some with the new iOS 5.1.1

Follow basic troubleshooting found in your user Guide for your phone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Reset, restore, Service.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414

Beware the Security Update - How I fixed my WIFI problem and a question

First of all I have read the "Latest Update from 21 January is A Disaster" thread and I basically agree with Andrew is Stuck so please don't feel the need repeat any of the stuff about it is not a bug in the update etc etc and I should have a Super Duper clone to hand etc etc . I have read that stuff. You are probably right but they should write on the Security Update info panel - "Be Careful this could really ruin your day".
I am ****** off and stressed out and I need to rant and I am not looking for that kind of lecture - even if it is partially or wholly true. I need to feel positive by warning people the way I wish I had been warned!
NB I am near the end of a professional dance tour as Musical Director running music on Logic on my MBP and it has been working fantastic - not a single glitch in 6 weeks. I would never upgrade my OS or Logic in the middle of job like this BUT Security Updates have always seem like something you should install because they will protect the Mac or protect against any new viruses etc. I have never had a problem with them before. (THAT ATTITUDE WILL NOW CHANGE!!!)
This update has caused a lot of people a lot of problems (check out this forum) and it has caused me more real world problems than anything I have downloaded and installed from anywhere in the last 3 years. Thus it has nothing to do with Security!!! HOw any people does a Security Uodate have to goose before it becomes an unsatisfactory Security Update?
This security update suddenly stopped my WIFI working and put me in a real hole.
(I am sure you don't care but I have a meeting tomorrow morning that I needed to do 3 hours of prep for including looking at VIDEO online. And the Security Update has just put paid to that. )
After 3 hours I have just got WIfi back- here's how:
I repaired permissions twice with Disk Utility - no joy. I found I could get online when I booted in Safe Mode (and I could get online with my Iphone on the same WIFi setup) so I knew it was not the router - though I did switch the router on and off a few times,
When I initially ran Repair permissions there was loads of things needing repair. I ran it again and 2 remained:
usr/share/derby it keeps trying to repair
and one of the package contents of the ARDAgent.app (System>Library>CoreServices>RemoteManagement>ARDAgent.app>Contents>MacOS>ARDAg ent) had a warning attached that it in the Disk Utility Repair Permissions report that it had been modified.
So I restored ARDAgent.app from a Time Machine Back up and replaced the offending file when in Safe Mode (Restart with Shift held down). - using Ctrl Click to open the ARDAgent.app package contents.
This seemed to sort it all out for me.
I guess people need to look in their Disk Utility Repair Permissions reports and see if any esoteric system files have been goosed by the update and see if they can get them back - although if you don't know what you are doing this could make things worse......
Anyway I DO have questions:
If this hadn't of worked:
1) Would reinstalling Snow Leopard from disks have upset my preferences, installs of Logic and Audio drivers and 3rd party application installs and the rest?
- the main stressor when this happens is not trying to lose the whole day.
2) Is there a way of just restoring the System from a Time Machine Backup or a SuperDuper clone or do you have to restore the whole state of the entire Hard Drive?
Best
Tommy Banana
PS I feel better now. Thanks for listening.

The fact that you saw no glitches while running Logic before applying the update means almost nothing because that uses only a small subset of system resources. Far more significant is that Safe Mode restored some missing functionality: because it disables non-essential items like user fonts, third party drivers, & so on, it points to problems in those areas.
Equally significant, the fact that there are relatively few reports of post-update problems among the several million Snow Leopard users points away from the update itself as the cause of your problems.
Separate & apart from that, it so happens that I'm a sound engineer/system designer/board operator with nearly 40 years of professional touring experience. FWIW, I never have & never will update the software of any system I must rely on professionally (whether it is running on a Mac, a PC, or dedicated hardware) unless & until I can thoroughly test it first and I have a trustworthy backup/recursion strategy to fall back on in case of problems.
I strongly suggest you learn from your unpleasant experience & do the same. I have had far fewer problems with Macs than with PC's, but nothing is 100% reliable to begin with. Changing the OS software part way through the tour is just asking for trouble, no matter how reliable that has been in the past. Even if the budget allows for nothing better than a stack of burned CD's & a couple of consumer grade CD players, no professional tour can afford to be without some fallback strategy in place. That should be self-evident & require no warning from Apple or anybody else.

My wifi problem -- and solution

Similar Messages

Maybe you are looking for