My Win7 64 bit got following error message after plug in iPhone: This iPhone cannot be used because the required software is not installed!  It advised me to reinstall 64-bit version of iTunes ( but it is already 64 bit!)

I just upgraded the iTunes 10.6.1 for Windows (64-bit) yesterday!

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Similar Messages

  • Got error message this Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes and install the 64-bit version and already have latest version and 64

    Got error message :"This this Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes and install the 64-bit version"   This is on a new macbook.  I already have the latest version installed and 64 bit.  Help.

    Did you do what the message said?
    Also try using the Win 7/Vista link in the following:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of

    When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of itines.) This just started a few weeks ago. I've done a system restore on my computer, deleated and reinstalled the 64-bit itunes several times, did a registery clean, rebooted. Nothing seems to work it will not pick up my phone.

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I plug in my iPhone and this message showed. "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I did this but still not working. Please advise

    I have a problem with connecting my iPhone to iTunes. I uninstalled one of the computer program and restart my laptop. After restart my laptop and a message said that iTunes might not working because one of the component is missing and request to reinstall the iTunes. Hence I remove iTunes from my laptop and I reinstall iTunes to my laptop but still not working.
    Before this the iTunes will automatically launch when I plug in my iPhone. But after I reinstall iTunes, it's not working. When I try to plug in my iPhone after iTunes launched and message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." popped out. I did this twice but it's not working as well.
    Please advise what should I do to fix this.

    First make sue you are installing the 64 bit version of iTunes.
    Second make sure it is iTunes 10.7 or later.
    I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
    Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Everytime I connect my iPod to USB, iTunes says the following: This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.

    I have the latest 64-bit version of iTunes on Windows 7 Ultimate.  Everything was fine until recently.  Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message:  "This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes"  I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities.  Same message appears when I plug in my iPod.  Any help would be greatly appreciated.

    Did you try removing and reinstalling all the Apple software using these instructions:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • I received this error msg when I wants to sync my 3gs iphone. Please help. "This Iphone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."

    I received this errir msg when I wants to sync my 3gs iPhone. And I already update my iTunes to 64-bit. "This iPhone cannot be used because the required software is not installed.Run the iTunes installer to remove iTunes, then install the 64-bit version itunes".

    First make sue you are installing the 64 bit version of iTunes.
    Second make sure it is iTunes 10.7 or later.
    I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
    Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

    I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
    this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
    If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
    My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
    *Will add & remove totally uninstall Itunes so that I can reinstall?
    *Will I lose my apps, music & data?
    *If the apps, music & data is recoverable, how do I do that?
    Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

    dorygirl2009 wrote:
    I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
    This "smart friend" really sounds like a collosal moron.
    Follow the instructions here: http://support.apple.com/kb/HT1925  to remove and reinstall all Apple products on your computer.
    Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****! 
    None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

  • This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes

    I have seen others post this same question but the answers provided does not resolve my problem. My iPad Air is running iOS 7.1.2. I have been using this same computer for three years. It has Windows 7 home premium, service pack 1,  64-bit Operating System, Intel 3.4GHZ computer and 16.0 GB .  I used this same computer with my iPad2 for several years. I purchased an iPad Air a year ago. I never had a problem with either iPad using iTunes. About a week ago, my computer would no longer recognize the iPad Air. I thought it must be a driver problem or iTunes somehow became corrupted. I uninstalled all of the Apple products except for iCloud and deleted any Apple software left in my Program Files and Program Files (x86). I then downloaded from Apple, iTunes64Setup.exe which is a 110,833 KB program. I installed the program without a problem. It installed Bonjour, Apple Software Update, Apple Application Support and iTunes. These programs I had previously uninstalled. I then brought up iTunes.  I now plugged in my iPad Air and a popup message appeared "This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes". OK, I did as instructed. I used the iTunes installer to remove iTunes then ran iTunes64Setup.exe. I brought up iTunes and got the same message. "This iPad cannot be used because the required software is nt installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes"  In general, I have found the Apple software to be robust and reliable. This situation however is very disappointing. I am hoping that someone has an answer that I can use to resolve my problem.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
    In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
    tt2

  • Installed 11 64 bit now get  "The iPHone cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."

    Installed iTunes 11 64 bit now get  "The iPhone cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." Uninstalled and installed twice no help. windows 7 64 bit, iPhone 5 OS 5.1

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • After downloading Itunes I get the message this Ipod cannot be used because the required software is not installed.Run the itunes installer to remove Itunes then install Itunes again

    After downloading Itunes I get the message this Ipod cannot be used because the required software is not installed.Run the itunes installer to remove Itunes then install Itunes again

    Did you do what the message said?
    Also try using the Win 7/Vista link in the following:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • This phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

    this phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

    Have managed to cure it based upon the following information received -
    I keep having this problem with iTunes when I try to connect my iPod Touch to iTunes. I keep getting this error message: "This iPod cannot be used because the required software is not installed".
    What I did:
    Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
    I have already done this required step about a hundred times and I am still getting this same error so if you have any idea of what I can do please help.
    Solution
    I was running the 64-bit version if iTunes, and I did uninstall and re-install just to make sure -- no luck. Turns out there's a really easy solution, I'll spare you the detail of how I figured it out, but if you encounter the same issue, here's the solution:
    1) Using WinRAR (or any other decent archiving program), extract iTunesWindows64Setup.exe
    2) Right click on AppleMobileDeviceSupport64.msi and choose Properties.
    3) Switch to the Compatibility tab and check the "Run this program in compatibility mode for:" box, and select your only option, "Previous versions of Windows", in the drop-down box.
    4) Click OK
    5) Double click the AppleMobileDeviceSupport64.msi
    6) Tell it to Repair your current installation
    7) Done!

  • This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes and then reinstall it again

    I tried yesterday to install iTunes on a XP Services Pack 3 Pc, It said that it couldn't install it. So after much reading last night, i downloaded Revo Uninstaller Pro, and uninstalled all apple software, included Bonjour, Quicktime and Apple Support along with iTunes. I then, used Ccleaner to double check that nothing apple related was left in the registry.
    After doing all the above, i rebooted the PC, and downloaded a fresh copy of iTunes from the website, and installed it. I installed the first time of asking. I then pulged in my Son's new iPod, and it detected it as a scanner/Camera, and behind that was a message that said the following:" This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install iTunes again"
    I've tried doing this, and it keeps coming up with the same message
    Can anyone help please

    In Windows 7, go to Control Panel (usually in the Start menu) and look for Add and Remove Programs. It will load a long list of programs. Find iTunes on that list and uninstall it. Then try using the 64-bit installer.

  • "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again."

    I keep getting this error everytime I plug my phone to my computer. "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again." I don't know how to solve this, I've tried uninstalling and reinstalling several times, But it wont fix the problem.
    This is the error i'm getting. Please help!

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

  • I restored my iPhone 3 g to its factory settings and I tryed to connect it to iTunes on my laptop and it said This iPhone cannot be used because the required software is not installed. Run the installer to remove iTunes. Then install iTunes again. HELP!!

    I restored my iPhone 3 g to its factory settings and I tryed to connect it to iTunes on my laptop and it said This iPhone cannot be used because the required software is not installed. Run the installer to remove iTunes. Then install iTunes again. HELP!! PLEASE!! Because I cannot get on my iPhone!!

    Hi, Mommacat26. 
    Thank you for visiting Apple Support Communities. 
    This usually means that a required component is missing.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Removing and Reinstalling iTunes and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    If the issue persists, try installing the Apple Mobile Device Support driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows XP or Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • Iphone cannot be used because the requires software is not installed -  removed itunes 10.5 and re installed still same problem

    iphone cannot be used because the requires software is not installed -  re installed itunes still same problem

    Is Apple Mobile Device Support currently appearing in the Uninstall a program control panel on the PC, vyvsdad?

  • HT1414 Trying to update new songs to my Iphone but getting "This phone cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install ITunes again". This has not occured previously.

    I am trying to add new songs from Itunes to my Iphone but getting the message "This phone cannot be used because the rquired software is not installed. Run the Itunes installer to remove Itunes, then install Itunes again". This is the first time that I have had this issue as I have not had this message in the past. This must be a common thing but I don't what know what to do next. If someone would be kind enough to send me some advice, I would appreciate it.
    Thanks in advance for your help. In the meantime, I remain stuck.
    Cheers, Paul

    Hi Wjosten,
    I am running Windows 2007.

Maybe you are looking for

  • Hi, i'm looking for a good video editing software for my powermac G5

    Hi i bought me a powermac G5n quad processor with 8Gb I want to make DVD's with it, So i'm looking for a good program to do it. Can i get a few suggestions. Thx

  • IPhone 6 Canada Rogers will work on USA T Mobile LTE?

    Hey All, I have an iPhone 6 with Rogers in Canada. I'm moving to the States in a few months and I would like to know if I will be able to use my iPhone 6 with T Mobile's LTE service. Rogers said they will unlock my phone for INTERNATIONAL use. But I'

  • Please explain   how to handle

    iam reading some value from a file and write to another file.In the reading file contains <edm:fromReference>268520629#268771030</edm:fromReference> <edm:OrderItem> <edm:Order orderID="1024560"/> <edm:fromReference>1024560</edm:fromReference> <edm:fr

  • MRP lot size?

    HI All, Guys i configured M.R.P Type and M.R.P Controller, but I am unable to understand the M.R.P Lot size? while i am creating a material in mm01 lot size is not allowing me to chose any other option except EX-Lot for Lot Order quantity.. could any

  • Z1 camera vs z camera, lacks white balance

    i have compared the camera shots yesterday. why is the camera of z produces better shots? z1's camera shot samples are so grainy and noisy. im disappoinyed because im planning to buy z1 soon. and it also lacks white balance on display which imprives