My windows 7 restarts in each 5 minutes (approx.)

I have changed the recovery settings. Changed the settings of driver compatibility. But the problem remains. Please help me.

Hi,
Please logon with Safe Mode to see if the same issue occurs. The issue might be caused by the incompatible driver or RAM issue, please update all drivers to the latest version or test.
if the issue still persists, please collect Minidump files for us:
Collect Minidump Files
=================
1. Click "Start", input "SYSDM.CPL" (without quotation marks) in the “Search” bar and press “Enter”.
2. Switch to the "Advanced" tab and click the "Settings" button under "Startup and Recovery".
3. Under "Write debugging information" section, make sure the "Small memory dump (128KB)" option is selected.
4. Make sure "%SystemRoot%\Minidump" is in the "Small dump directory" open box and click “OK”.
If the system crash again, please refer to the following steps to collect memory dump files:
1. Click “Start”, type “%SystemRoot%\Minidump" (without quotation marks) in “Search” bar and press “Enter”.
2. Go to your Desktop, right-click on it and create a new folder named "Dump".
3. Copy all the memory dump files (looks like [Mini092008-01.dmp]) in Minidump to this folder.
4. Right-click on the Dump folder, click "Send To", and click "Compressed (zipped) Folder".
5. Upload to OneDrive.
Karen Hu
TechNet Community Support

Similar Messages

  • Restarting after update - Windows has encountered a critical problem and will restart in one minute?

    This is a worrying one - I updated Reader today and restarted after it promted me. Soon after the pc rebooted I got an error message that said "Windows has encountered a critical problem and will restart in one minute". After it restarted, I checked the event logs and came up with this error: "A critical system process, C:\Windows\system32\lsass.exe, failed with status code 1.  The machine must now be restarted.". This has never happened before and I want to know if the Reader update did anything bad. I restarted several times afterwards and it didn't happen again, but still.. it's worrying me. Is this a common error after the update or am I missing something? Running Windows 7 Home Premium 64-bit

    I understand that you are worried.
    I have a very similar setup as yours, and nothing happened after the Reader 10.1.3 update.  The one difference is that the update did not prompt me to restart Windows.  (It did prompt me on several other [XP] systems.)
    Let's wait and see if anyone else encountered a similar problem.

  • Windows XP Restarts every 15 minutes

    I have not used boot camp for a couple on months until last week (Boot Camp v.2.1). I have a problem where windows XP shuts down after 15 minutes whether I was actively using it or not. I get a blue screen when it crashes but it flashes on and off so quick, I cannot read it. I noticed when I reboot into windows after a crash, I get a windows 'Disk Consistency' error and windows checks the disk. Sometime it finds errors and more often it does not. Once the disk check is completed, and errors corrected, windows restarts. I do get a 'Fatal Error' message to send to Microsoft once Windows starts successfully. I have turned off all power options in windows and turned off screen saver. It still restarts after 15 minutes. If I restart windows before the 15 minute period, I do not get the "disk error". It still restarts after 15 minutes.
    After reading some suggestions to reload the drivers, I did that and restarted windows. After 15 minutes it restarted again.
    I have seen one other post and they are having the same problem.
    Is anyone using the windows screen saver and power features in XP? Since this happens every 15 minutes on the dot, is there a problem with boot camp and XP management features?

    Well I just resolved almost a year long problem with the blue screen of death (BSOD) every 10 or 20 minutes (symptoms were the same as you reported where it would blue screen whether there was activity or not) - neither Apple nor Windows help could solve. Problem was masked as I upgraded to bootcamp 2.1 and winxp sp3 and a new version of Norton AV at around the same time. I kept thinking that it must be either the sp or bootcamp and tried repairs and eventually reloaded the whole system with no improvement. 2 nights ago I removed the Norton AV (from the winxp partition) and replaced with Trend Micro's internet security and for the first time in almost a year I've had no crashes - my daughter used the xp partition to do a power point presentation and spent several hours with no problems....

  • For the past few weeks when I place a bid on ebay, Firefox crashes. The bid goes through but I have to restart Firefox each time. I have sent a report each time and asked to be notified and as of yet I have not got a solution to this problem.

    For the past few weeks when I place a bid on ebay, Firefox crashes. The bid goes through but I have to restart Firefox each time. I have sent a report each time and asked to be notified and as of yet I have not got a solution to this problem.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Time scrolls across the screen each minute

    does iPhone have an active notification feature where the time scrolls across the screen each minute?   Or is there an app that does this?
    I saw a Motorola smartphone yesterday that had this feature.  It would be fabulous !!!!!!

    TThe feature I saw didn't require touching the phone, the time automatically scrolled across just for a few seconds, each minute.
    FAbulius for for a massage therapist who uses her hands to work on clients but wants to know the time. 
    are you suggesting that if I unlock my phone, I can see the time on my phone without touching the phone?   Is this constant and therefore a drain on my battery?  Then too my phone isn't locked. 
    IM missing something for sure. can you explain?
    thank you for your kind assistance.

  • How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I ope

    How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

    Which version if iPhoto and MacOS X do you have?
    Do you have any iPhoto plug-ins  installed?
    Open the folder /Library/Application Support/iPhoto/Plugins/
    To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto.  Is there anything installed?

  • I have to restart ipad each time for internet access.  Why?

    I have to restart ipad each time for internet access and some games.  Never happened until about 2 weeks ago.  ?

    Firefox is a browser: it doesn't require you to 'sign in'.
    It sounds to me like you have some kind of malware installed if you're required to 'sign in' every time you use it.
    I'd recommend you use Internet Explorer (''assuming that doesn't require you to 'sign in' too'') to go to http://www.malwarebytes.org/ and download the free version. It will quarantine any malware it finds so restart Firefox afterwards to see whether the problem recurs or not.

  • Restart every 2 minute

    i have another problem  which restart every 2 minutes 

    mrozno wrote:
    i have another problem  which restart every 2 minutes
    If you have a variety of problems and things are crazy across the board, then you can't go wrong by doing a clean system install. Everyone should do it periodically, anyway, whether they have problems or not.
    Follow this procedure for a Troubleshooting Methodology ... basically reset to factory default condition -BUT- be sure to do the following methodically and also to follow the part with Apple Support!
    First you want to make sure you have several backups of your data and done with a couple of "different" sources. Be sure to understand what data is backed up and what is NOT on iCloud Backup and iTunes Backup. Use a variety of methods for backup ... you might check into Dropbox, in addition to your Apple options.
    Then turn off your desktop anti-virus software when using iTunes for this reset to factory default. After you do that reset, then leave your iPad in its factory default state and see how it operates then. If you encounter any problems in that factory default state, then take it to Apple Support, and let them know that you have just reset it to that state with iTunes and have not put any of your data back on and it is operating in this fashion (whatever the problem is) in that pristine state. Make sure you keep that trouble ticket number, because if it has to be escalated through Apple Support, you're going to find all communications tied in with that number. If the lower level help isn't able to help you, then escalate it to a higher level to examine the problem. Keep at it with that trouble ticket number until Apple Support arrives at a solution to that problem. Be methodical and keep at it.
    On the other hand, if everything is okay with the factory default condition, then restore your backup. Some people have discovered that the problem resides in the apps or something in the restored backup. If that's the case, then it's going to be trying and difficult to find out which developer's app is causing you the problem. And ... it's true ... that a developer not following Apple's instructions and guidelines for his app can CAUSE YOU TROUBLE. This kind of thing does happen from developers, especially when a new system upgrade comes out, because some developers ignore what Apple tells them about changes coming, and what they do BREAKS SOMETHING.
    This is a troubleshooting methodology that you are going through. See it through to the end.
    Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
    https://support.apple.com/kb/HT5262
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
    http://support.apple.com/kb/ht4946
    iOS: Troubleshooting Encrypted Backups
    http://support.apple.com/kb/TS5162
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

  • MacBook Pro restarts precisely 5 minutes after wake up, due to sleep wake failure

    I have a mid-2009 MacBook Pro running OS 10.9.3. When I am running on battery power, it restarts precisely 5 minutes after I open the lid and wake it up. I have no problems when connected to a power supply.
    A (condensed) excerpt from the Console logs looks like this:
    03/06/2014 01:16:02.000 kernel[0]: Wake reason: EHC1 OHC2
    03/06/2014 21:59:21.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    03/06/2014 21:59:21.000 kernel[0]: Previous Sleep Cause: 5
    03/06/2014 21:59:21.000 kernel[0]: USB (EHCI):Port 4 on bus 0x24 connected or disconnected: portSC(0x301803)
    03/06/2014 21:59:21.000 kernel[0]: The USB device BRCM2046 Hub (Port 1 of Hub at 0x6000000) may have caused a wake by being disconnected
    03/06/2014 21:59:21.000 kernel[0]: [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- ERROR -- kUSBInformationDeviceIsSuspendedBit is set ****
    03/06/2014 21:59:21.000 kernel[0]: [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- Error -- SuspendDevice () returned 0xE00002C0 (kIOReturnNoDevice), GetDeviceInformation() returned 0x0000 (kIOReturnSuccess), attempting to continue...
    [hundreds of lines elided]
    03/06/2014 22:04:21.000 kernel[0]: Restarting to collect Sleep wake debug logs
    03/06/2014 22:04:58.000 bootlog[0]: BOOT_TIME 1401829498 0
    See how the wake time and the restart time (in red) are exactly 5 minutes apart?
    I have tried resetting NVRAM/PRAM, and the SMC reset, to no avail. DiskUtil finds no errors. The only variable I can control which affects the problem is whether the power cable is plugged in or not.
    I would like to better understand the items in blue: the code for the wake reason (EHC1 OHC2), the enumeration of possible sleep causes (Previous Sleep Cause: 5) or the "I'm now going to screw up your work" notification (Restarting to collect Sleep wake debug logs).
    Finally, there are errors relating to the USB controller. I would be interested in knowing if these are related, but I don't really know how to test for that.
    Does anyone know how to fix this?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I have an Acrobat 8 which is all I need.  Installed on my new computer which is using Windows 8.  Each time I open Acrobat I get a window that say unable to registrator.  It gives me three options try again, redo, never register.

    I have an Acrobat 8 which is all I need.  Installed on my new computer which is using Windows 8.  Each time I open Acrobat I get a window that say unable to registrator.  It gives me three options try again, redo, never register.  No matter which option I choose I cannot stop the window from opening each time I open the computer.
    Any suggestions?

    Probably far too old to register. Sounds like a bug, stopping the "never" selection from working. You may be stuck with it.

  • TS3274 My IPAD keeps restarting a few minutes after booting up. It just keeps doing it again, and again, with no error messages. Grateful for any help!

    My IPAD keeps restarting a few minutes after booting up. It keeps doing it again and again, after the same period of time. Grateful for any help!

    If the above doesn't work, force iPad into Recovery Mode.
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Windows restart when wake from sleep

    7 SP1
    windows restarts when wake from sleep
    I have a minidump but don't know how to include it.
    /GA-Z87N-WIFI mobo, i5 4670K, 8GB, Win7 Pro x64 SP1 current, Sammy 128GB Evo

    Kris
    These were Related to
    aswSnx.sys avast! Virtualization Driver from ALWIL Software (AVAST).  I would remove it and use MSE instead
    Avast  can be a  contributing cause of BSOD'S . 
    Please remove and replace  with Microsoft Security Essentials AT LEAST TO TEST
    http://files.avast.com/files/eng/aswclear5.exe
    http://www.microsoft.com/security_essentials/
    Dont forget to turn verifier off by typing verifier /reset
    M
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
    Machine Name:
    Kernel base = 0xfffff800`03203000 PsLoadedModuleList = 0xfffff800`034466d0
    Debug session time: Wed Feb 5 17:38:41.395 2014 (UTC - 5:00)
    System Uptime: 0 days 4:40:23.207
    BugCheck 1A, {31, fffffa800ad4f340, fffff880084df000, fffff8a008d543da}
    *** WARNING: Unable to verify timestamp for aswSnx.SYS
    *** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
    Probably caused by : aswSnx.SYS ( aswSnx+278c8 )
    MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
    Arguments:
    Arg1: 0000000000000031, The subtype of the bugcheck.
    Arg2: fffffa800ad4f340
    Arg3: fffff880084df000
    Arg4: fffff8a008d543da
    Debugging Details:
    BUGCHECK_STR: 0x1a_31
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
    PROCESS_NAME: firefox.exe
    CURRENT_IRQL: 0
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    LAST_CONTROL_TRANSFER: from fffff800034d7515 to fffff80003278bc0
    STACK_TEXT:
    fffff880`09c98488 fffff800`034d7515 : 00000000`0000001a 00000000`00000031 fffffa80`0ad4f340 fffff880`084df000 : nt!KeBugCheckEx
    fffff880`09c98490 fffff800`0354f287 : fffff800`00000000 00000000`00000000 00000000`00000884 fffff8a0`08d15000 : nt! ?? ::NNGAKEGL::`string'+0x71b1
    fffff880`09c984f0 fffff800`03259a92 : fffffa80`04a44ad0 00000000`00883400 fffffa80`04d9e9b0 fffff8a0`041c0468 : nt!MiRelocateImagePfn+0xf7
    fffff880`09c98550 fffff800`035533b1 : fffffa80`0af86780 fffff6fc`400428d0 fffff8a0`00000002 00000000`00000000 : nt!MiValidateImagePages+0x362
    fffff880`09c98600 fffff800`035534f0 : ffffffff`ffffffff 00000000`00000001 fffff8a0`08d15000 fffff800`00000170 : nt!MiSwitchBaseAddress+0x61
    fffff880`09c98630 fffff800`03575f7f : 00000000`00000004 00000000`00000080 00000000`01000000 00000000`01000000 : nt!MiRelocateImageAgain+0x100
    fffff880`09c98680 fffff800`03552c2e : fffff880`09c988d0 00000000`00000000 00000000`00000000 fffff880`09c988c8 : nt!MmCreateSection+0x2df
    fffff880`09c98880 fffff880`030908c8 : 00000000`00000000 fffff880`09c98a08 00000000`00000000 00000000`00000008 : nt!NtCreateSection+0x171
    fffff880`09c98900 00000000`00000000 : fffff880`09c98a08 00000000`00000000 00000000`00000008 fffff800`00000010 : aswSnx+0x278c8
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    aswSnx+278c8
    fffff880`030908c8 ?? ???
    SYMBOL_STACK_INDEX: 8
    SYMBOL_NAME: aswSnx+278c8
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: aswSnx
    IMAGE_NAME: aswSnx.SYS
    DEBUG_FLR_IMAGE_TIMESTAMP: 51cc5c35
    FAILURE_BUCKET_ID: X64_0x1a_31_VRF_aswSnx+278c8
    BUCKET_ID: X64_0x1a_31_VRF_aswSnx+278c8
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:x64_0x1a_31_vrf_aswsnx+278c8
    FAILURE_ID_HASH: {f43a31e8-a1ef-8e81-3cc5-7c9f76e5ce50}
    Followup: MachineOwner
    Wanikiya and Dyami--Team Zigzag

  • IPhone 4s restart all 3 minutes , why ?

    iPhone 4s restart all 3 minutes , why ?

    I've worked for an AASP for over a decade. don't even go there.
    Your info is Incorrect.  DFU is a hacking method and not needed for anything other than hacking or occasionally fixing hacked phones.  >90% of people who post about using "DFU" mode have no clue what it is and confuse it with Recovery Mode.
    http://www.ihackintosh.com/2009/06/recovery-mode-and-dfu-mode/
    "DFU Mode : DFU Mode is a special mode where the device can still interface with iTunes, yet it does not load the iBoot. The screen will appear totally black in DFU mode, so you can’t guess whether the device is in DFU or powered down from simply looking at the screen. Because iBoot and the OS are not loaded this exploit makes us able to downgrade your iPhone firmware or upgrade with a custom firmware created by Pwnage tool."

  • Hi guys ... broken SSD 128 GB ... the "Air" is consuming 0.5 GB !!! each minute !!! help me !!!

    yesterday evening i was printing out a calendar using iPhoto.
    it printed out 6 pages instead of 28.
    it said it was completed.
    i printed it out again.
    and everythng worked fine.
    but the system was very very slow.
    at the end of the print process, i reset the system several time.
    but nothing changed.
    now, i discovered that the system is "using" 500 MB each minute.
    i had 77 GB free ...
    now, doing anything, i have only 23 GB free.
    i checked the SSD, ad the disk utility said that the disk is broken and it needs to be fixed up, booting from another device ...
    but, with the Air, it is impossible (it seems to me).
    so ... anyone of you have an idea about what do i have to do?
    thanks.
    Mauro.

    yesterday evening i was printing out a calendar using iPhoto.
    it printed out 6 pages instead of 28.
    it said it was completed.
    i printed it out again.
    and everythng worked fine.
    but the system was very very slow.
    at the end of the print process, i reset the system several time.
    but nothing changed.
    now, i discovered that the system is "using" 500 MB each minute.
    i had 77 GB free ...
    now, doing anything, i have only 23 GB free.
    i checked the SSD, ad the disk utility said that the disk is broken and it needs to be fixed up, booting from another device ...
    but, with the Air, it is impossible (it seems to me).
    so ... anyone of you have an idea about what do i have to do?
    thanks.
    Mauro.

  • Windows Restarted Unexpectedly while applying systems settings after MDT 2012 deployment.

    Posted this in another forum, so I figured give this forum a try.
    Hello,
    I wonder if anyone can help or point me in the right direction.  I've created a couple of WIMs and deployed them out using MDT 2012 and WDS running on a Windows 2008R2 server.  The images are created and captured fine.  Sysprep runs with no issues
    and I can deploy out the images to any PC/laptop I want.
    The issue I'm running into is I can deploy out this image to 100 PC's without any issue.  Then all of a sudden, I'll get an error saying Windows restarted unexpectedly or encountered an unexpected error and can not continue.  This will then happen
    from now on with this particular image.  For instance I've imaged a particular Dell Optiplex 790 multiple times with no problem, then all of a sudden I get this error on this or any other PC i image.
    If I create a new image, the pattern just keeps happening over and over again.  I know it's not an issue with the physical computers themselves and I can imagine something is corrupting every image I have over a certain amount of time, so I'm sort of at
    a loss.  Driver issue perhaps?
    Thanks,
    Mike

    I'm having what sounds like the same problem, which is why I posted it with this thread.  I have been using MDT 2013 on various computers without any issues and now I am receiving the
    Windows restarted unexpectedly message after the image has been applied.  It will not get past the error.  We only recently began using MDT 2013 with windows 2012 R2, so I don't have much experience troubleshooting.  The only error I
    found in the smsts.log is as follows:
    User specified local data drive D: TSManager
    2/6/2015 1:20:20 PM 628 (0x0274)
    D:\_SMSTaskSequence does not exist TSManager
    2/6/2015 1:20:20 PM 628 (0x0274)
    Creating directory D:\_SMSTaskSequence TSManager
    2/6/2015 1:20:20 PM 628 (0x0274)
    uRet == ERROR_ALREADY_EXISTS, HRESULT=80070003 (e:\nts_sms_fre\sms\framework\tscore\utils.cpp,916)
    TSManager 2/6/2015 1:20:20 PM
    628 (0x0274)
    Failed to create D:\_SMSTaskSequence (3) TSManager
    2/6/2015 1:20:20 PM 628 (0x0274)
    I am deploying windows 8 (x64 &x86) custom wim images created using Hyper-v.  In my custom.ini file I use an IP address for my server and I join the computer to our domain.  
    1) Could the IP address be causing the problem?  Should I use the full domain address for my server?
    2) If the WIM file is locked somehow or unavailable, what services should I turn off on the server?
    3) Any other suggestions?
    I won't have access to the server for a couple of days and I wanted to get help before I start to make changes or create another image.  Thank you!

  • My phone keeps restarting every 5 minutes. how do i make it stop

    my phone keeps restarting every 5 minutes. how do i make it stop

    Try to sync you phone with iTunes to create a new backup before it restarts.  Also try to import your photos (see http://support.apple.com/kb/HT4083) and back up your contacts if you can (sync them to iCloud in Settings>iCloud>Contacts>On or use an app like My Contact Backup).  When done, force you phone into recovery mode and restore it, as explained here: http://support.apple.com/kb/ht1808.

Maybe you are looking for

  • BPEL and Oracle Applications Adapter

    I am using the Oracle Applications Adapter of the JDeveloper BPEL Designer 10.1.2.1.0 to insert a customer into the Oracle eBusiness Suite. To achieve this I select the tab Financials/Trading Community/Customer Account Contact/Open Interfaces/Trading

  • Will my dual 500 go faster? Harddrive & external hard drive issues

    I need some advise, please! I have a Dual 500 MHz PowerPC G4. Memory: 1.38 GB SDRAM. Harddrive 40GB The memory slots are a follows: 256MB 128MB 512MB 512MB 1. I would like to speed things up as it is sooo slooow! If I replace the 2 smaller cards with

  • Function Module to get  hierarchy details from a customer account

    Hi Experts, There is certain hierarchy maintained among Business partners. We can see that in transaction BPH. Now What I require is a function module which takes BP number as input and gives output the BP number of child nodes of it . Is there a sta

  • My itouch keeps freezing

    So i just got my new 8gb itouch with my laptop at the beginning of the summer. Everything was working fine until i got the new 2.0 update then my itouch would randomly start restarting. After Mac released the newest verison 2.0.1 i updated my itouch

  • ABAP webdynpro concepts

    If i want to work with ABAP webdynpro, what are all main areas or concepts to be covered in ABAP webdynpro?