My Windows part of the drive got all of the files deleted and got renamed

My Windows part of the drive got all of the files deleted and got renamed to Time Machine Backups. This all happened when i woke up and i tried to do to the windows part of the drive and it was not there. So I went to the mac part and i saw it was renamed to Time Machine Backups. So then I clicked to see if any thing was in the part. Nothing. I tried to go to boot camp assistant it said -The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.-So Then I went to disk utility to erase it but it did nothing. PLEASE HELP ME

1. Time machine probably has the disk locked. Go into time machine preferences and turn it off.
2. open DU (disk utility), see if you can dismount the boot camp partition. If not, log out, log back in and try again with DU. Once it will mount and dismount go to step 3.
3. In DU select the boot camp volume, select erase, select msdos file system (format), select name for partition, select erase.
4. Close DU, Open preferences > system > startup disk.
5. Highlight the msdos partition, close preferences (this blesses the msdos partition and sets it to boot).
6. Place your windows cd/dvd in the tray, close tray and reboot.
7. Install windows.
8. After complete installation, select run, type in "cmd" (in windows).
9. A windows terminal will open, at the prompt type:
convert c: /fs:ntfs
press enter, it will ask if you want to schedule the conversion at the next startup?.
10. Select yes. Time machine will leave a ntfs drive alone, simply because it cannot write to it.
11. Reboot windows and let it convert the file system. That's it.
Kj

Similar Messages

  • I tried the "copy bookmarks" Firefox file open selectied Menu all bookmarks clicked 'file open' and got notheing

    Although I use Firefox as my principle browser I sometimes want to use Safari on my traveling Macbook. Is ther any way I can copy my FF bookmarks either to the Safari (can understand if not) or to a text file to use as reference??
    I tried following the suggestion that is n the forum .. didn't work.
    Appreciate and thanks,
    Ed

    Bookmark Backups
    Type '''about:support''' in the address bar and press enter.
    Under the page logo on the left side you will see '''Application Basics.'''
    Under this find '''Profile Folder.''' To it’s right press the button
    '''Show Folder.''' This will open your file browser to the current
    Firefox profile. Now '''Close Firefox.'''
    Enter the '''bookmarkbackups''' folder. This is where Firefox makes backups
    of your bookmarks. Look for the '''jsonlz4''' file you want to restore
    (check the time / date / size). Right click on that file and select '''Copy.'''
    Now go back to the profile folder where you started. Rename the file
    '''places.sqlite''' by adding '''.old''' to it. Now right click in the folder
    and select '''Paste.''' The file you just pasted here, rename it to
    '''places.sqlite.''' After you are done, restart Firefox.
    Edited to correct file name error.

  • I just got my first MacBook pro and dedicated an external hard drive for time capsule. I also have a WD 3TB hard drive with all my old files, photos and movies (mostly from a pc). My Mac book pro would not allow me to add or delete any files from this har

    This hard drive so I copies all the files (400gb worth) to my time capsule hard drive (WD 3 TB but set up by the Mac book pro). Now I am not sure what I need to do. I wiped the other WD hard drive cleAn on my pc and want to set it up in a way that I can access the files on both a pc and a Mac. If I partition it on my MacBook pro will this work? If I do it do I need to save the file twice on both the pc and Mac partitions or simply by partitioning it the hard drive will ave files in both formats regardless of if it's from a pc or a Mac. X
    Thanks

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

  • I updated my apple id and all my messages were deleted, and I cannot receive messages sent to my new apple id

    I just updated my apple id to match my primary email and when I logged into messages on my iPad with the new id, all my messages were deleted and I cannot receive new massages sent to my new id.  My iPhone which is still logged into my old apple id is receiving messages from both ids.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • After the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

    after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • I'm new to Mac. I have an iPhone and a Mac Mini.  My original iTunes was on a Windows computer that crashed.  So, all of my iTunes Music and Movies are gone.  How do I get the movies and music from my iPhone to the new Mac Mini?

    I'm new to Mac. I have an iPhone and a Mac Mini.  My original iTunes was on a Windows computer that crashed.  So, all of my iTunes Music and Movies are gone.  How do I get the movies and music from my iPhone to the new Mac Mini?

    If you still have the crashed Win computer, you may be able to recover your music and movies from the hard drive. If you have a friend with a hard drive USB connection kit and a PC, they should be able to help.  Otherwise, check locally for computer services that might do that for you (I think Best Buy Geek Squad may be able to help). If the drive itself is in good shape, it shouldn't be too expensive. 

  • Experiencing trouble syncing with the 10.3 version of iTunes on my Windows Vista machine. Have uninstalled all Apple software twice, reinstalled and continue to get an error 7 message in connection with the Photo Processor. Any other ideas to try?

    Experiencing trouble syncing with the 10.3 version of iTunes on my Windows Vista machine. Have uninstalled all Apple software twice, reinstalled and continue to get an error 7 message in connection with the Photo Processor. Any other ideas to try?

    Hi,
    got it fixed! My Son had both files on his Win7 iTunes installation. Never mind he had no issues whith ths iTunes and iPhone Sync. So I checked my other Win XP PC, where I don't have this problem syncing my ipad, and surprise. Both files do NOT show up on this PC. So I renamed the iTunesPhotoProcessor.exe I found under c:\program file\iTunes and synced again my iPhone and it went through without any error. So the problem might be and unremoved iTunesPhotoProcessor.exe or the missing iTunesPhotoProcessor.dll under the iTunes install root folder and this even if I had checked that the folder was completely removed during iTunes unistall.
    Please try yourselve and just rename the iTunesPhotoProcessor.exe to iTunesPhotoProcessor.exe_ under c:\program file\iTunes or get a copy of the missing iTunesPhotoProcessor.dll and cp to c:\program file\iTunes.

  • I upgraded to iTunes 11 and I got all of the songs on my families' other computers. How can I stop this from happening?

    I upgraded to iTunes 11 and I got all of the songs on my families' other computers. We all share the same AppleID, that's why this happened in the first place; but, I do not want their songs on my computer, how can I disable this without deleting the songs forever or making a new AppleID?

    I did not upgrade to the newest version of Itunes on my PC.  I just now went to my Library were Music is listed. Under that is Movies, TV Shows, ItunesU, etc.  When I opened my music list, each song was in numerical order.   If I have the songs listed alphabetically, they are in numerical order.  If I change my listing to album or whatever, the first song is listed in numerical order just as I showed in my original question.  They are also numbered on my Playlists.  I have my favorites in two different playlists.  One of them was minus a song.  I was able to see which one was missing because they were in numerical order.  I know I could have just copied to correct one into the incorrect one and just skipped the duplicates, but I chose to do it this way.
    So, the songs are listed numerically in my music folder under Library on my older version of Itunes.  But, on my newer version, they are not listed numerically under music.  Maybe I'm doing something wrong?????
    Thanks so much for your help.  I wish they would just leave things alone.  I would gladly go back to the older version on my other computer, but???? 
    Again thanks. 
    Marie

  • I just recently got a new iPhone 4 and the service is all of a sudden terrible and my calls are dropped constantly. This has never happened before. Any suggestions on what I can do? This is really frustrating!

    i just recently got a new iPhone 4 (my other one had water damage) and the service is all of a sudden terrible and my calls are dropped constantly. This has never happened before. Any suggestions on what I can do? This is really frustrating!

    May be your carrier but try a reset:
    Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears

  • The driver doesn't support the version of ODBC

    Hi:
    We have been working with timesten client on a windows, we had not have any problem, the number of clients had not connect more than 80 clients, but today we connected 125 clients and we got this error directly to the client application.
    ERROR [08001] [TimesTen][TimesTen 7.0.1.0.0 CLIENT]Unable to connect to data source (DSN: SentraProdDSN; Network Address: 10.100.134.24; Port Number: 16003). ENOTSOCK: Invalid socket or socket closed.
    ERROR [01000] [Microsoft][ODBC Driver Manager] The driver doesn't support the version of ODBC behavior that the application requested (see SQLSetEnvAttr).
    But on the server error log the messages were:
    14:52:02.75 Err : SRV: 8974: EventID=5| Socket recv() failed. Error (131): Con
    nection reset by peer. File: /olympus/build/release_20070911/VisiChannel/oc/src/
    vostcpip.cpp; Line: 632
    14:52:02.75 Err : SRV: 8974: EventID=68| Failed to read request from client. Cl
    osing connection without reply.
    14:52:06.38 Err : SRV: 9078: EventID=5| Socket recv() failed. Error (131): Con
    nection reset by peer. File: /olympus/build/release_20070911/VisiChannel/oc/src/
    vostcpip.cpp; Line: 632
    14:52:06.38 Err : SRV: 9083: EventID=5| Socket recv() failed. Error (131): Con
    nection reset by peer. File: /olympus/build/release_20070911/VisiChannel/oc/src/
    vostcpip.cpp; Line: 632
    14:52:06.38 Err : SRV: 9078: EventID=68| Failed to read request from client. Cl
    osing connection without reply.
    14:52:06.38 Err : SRV: 9083: EventID=68| Failed to read request from client. Cl
    osing connection without reply.
    14:52:06.81 Err : SRV: 9116: EventID=3| Socket send() failed. Error (32): Brok
    en pipe. File: /olympus/build/release_20070911/VisiChannel/oc/src/vostcpip.cpp;
    Line: 728
    14:52:06.81 Err : SRV: 9116: EventID=5| Socket recv() failed. Error (131): Con
    nection reset by peer. File: /olympus/build/release_20070911/VisiChannel/oc/src/
    vostcpip.cpp; Line: 632
    14:52:06.81 Err : SRV: 9116: EventID=68| Failed to read request from client. Cl
    osing connection without reply.
    14:52:07.13 Err : SRV: 16186: EventID=5| Socket recv() failed. Error (146): Con
    nection refused. File: /olympus/build/release_20070911/VisiChannel/oc/src/vostcp
    ip.cpp; Line: 632
    14:52:07.57 Err : SRV: 16186: EventID=5| Socket recv() failed. Error (146): Con
    nection refused. File: /olympus/build/release_20070911/VisiChannel/oc/src/vostcp
    ip.cpp; Line: 632
    So we don't know if this error could happen because the number of connections were exceeded, but when this has happened the error messages is different.
    Let me tell you that the application client was developed using C#. So could it be that the C# on .NET could have a instruction that the timesten ODBC could not manage?

    Is this problem reproducable? i.e. Does it occur whenever you get close to 125 clients connecting to TimesTen? Next time when it happens again, can you check to see whether you can establish a new client/server connection locally on the TimesTen server machine?
    Each TimesTen Client connection requires one server process, and by default, a server process is spawned when a client requests a connection. It is possible that you may have too many processes running on the server, hence it cannot spawn additional server processes to handle the new connections. The good news is that in 7.0.3, the TimesTen server is now multi-threaded and each process can handle multiple client connections (this number is configurable), so it's possible to have fewer server processes for the same number of client connections compared to previous releases.
    Please check out "Specifying multiple connections to the TimesTen Server" in the 7.0.3 Oracle TimesTen Operations Guide for more information on how to turn on the multithreaded mode.
    Regards
    Simon

  • When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

    When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

    Hi
    Try in iDVD
    • Save as a DiskImage
    • Play this by use of DVD-player tool
    Still OK or problems ?
    If OK - Burn it by use of
    • Apple Disk Util tool - or -
    • Roxio Toast™ (if You got this - I love it)
    Yours Bengt W

  • I have a problem - the program QuickTime player longer open files - gororit that codec for the opening of the program at all of the files that I opened have the extension avi. tried to remove a program, it is impossible.I tried to load the program fr

    I have a problem - the program QuickTime player longer open files - gororit that codec for the opening of the program at all of the files that I opened have the extension avi. tried to remove a program, it is impossible.I tried to load the program from Apple, reinstalled. but I was wrong still going on! what to do?

    before using for all entries in, u need to check whether the driver internal table is empty, if it is empty, u should not enter into select statement.
    if u wont use this check means, when the driver internal table is empty, the second select will take all the entires from the tables.
    SELECT  AEBELN ALIFNR AKNUMV BVGABE BEBELP BGJAHR B~BELNR
            FROM  EKKO AS A
            INNER JOIN EKBE  AS B ON  BEBELN = AEBELN
            INTO  CORRESPONDING
            FIELDS OF TABLE ITAB WHERE B~VGABE = '2'.
    if itab[] is not initial.
       SELECT EKPOEBELN EKPOMATNR EKPOTXZ01 EKPOWERKS EKPO~NETWR
              EKPOMENGE EKPOMWSKZ
          FROM EKPO
          INTO CORRESPONDING FIELDS OF TABLE ITAB1
          FOR ALL ENTRIES IN ITAB
          WHERE EBELN = ITAB-EBELN.
    endif.
    I hope this will help u.
    else,
    Sujatha.

  • I have 3 airport express units, an Ipod and a PC.  I used the PC to set up an airTunes and the AirUtility can see all three of the airexpresses.  The Ipod displays all of the airexpresses and I can pick any one to stream music to. PC won't - any ideas?

    I have 3 airport express units, an Ipod and a Windows 7 PC.  I used the PC to set up an iTunes/airTunes and the AirUtility can see all three of the expresses.  The Ipod displays all of the expresses and I can pick any one to stream music to. The PC won't - any ideas? AirUtility tells me the 7.5.2 version of the firmware is the latest for the expresses and ITunes is also reporting that there are no upgrades available.  I get an error code -15000 when I try to connect from the PC to one of the expresses.

    How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
    To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    Launch the AirPort Utility.
    Select the AX.
    If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
    Wireless Security: None OR, if you are using security on your wireless network:
    Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
    Password: <enter your wireless network security password>
    Verify Password: <re-enter the same security password>
    Click Update to write the new settings to the AX.

  • MSI GeForce 9800 gt after updating the driver can't see the whole desktop

         I have a MSI GeForce 9800gt, and I've tried to update the driver. After update I can no longer see the whole desktop, I have to move the mouse to the edge of the screen to see the rest, it's like there is a zoom or something.
         The driver that came with the CD works fine, but any other driver give's me the same problem. I've tried with v.191.07, v.178, v.258.96, v.306.81 and a few other. I've also reinstall the windows but with no better results (I'm using Windows XP Pro).
         Please help. Thank you.

    Thanks for the quick replay, so :
    Quote
    Did you try to set the correct resolution for your screen after updating?
    Yes, I've tried different resolutions, the only resolution where I see the whole desktop is 800x600. I even try to change the refresh rate to something lower then 60Hertz(I've read on a forum that a refresh rate of 51 or 59 might solve the problem) but no luck.
    Quote
    clean old drivers with >>Driver Fusion<< in Safe Mode 1st,
    then reinstall vga drivers
    I've tried this as well, I even try with a fresh install of windows, I've bought a new SSD for my system disk, so I have reinstall the windows.

  • HT201342 How will this benefit me. I have a Mac computer that i upgraded to Mountain lion, a macbook pro and an iPhone 4s which has the latest software. all i want is simplicity and to have one email account which which will not duplicate everything 4 or

    I have been asked to set up an Icloud account by Apple.
    How will having another icloud email benefit me. I have my work email which is all i require, but had to set up a @me account to get email on my Macbook.
    I have a Mac computer that i upgraded to Mountain lion, a macbook pro and an iPhone 4s which has the latest software. all i want is simplicity and to have one email account which which will not duplicate everything 4 or 5 times.
    My notes are duplicated, i have to delete my emails individually on all devices so whenever i put my phone on, all the emails i have deleted at work re-appear on my phone and again the same thing happens on my Macbook pro. I seem to spend all my time deleting emails 3 times.
    Is there something simple in the set up of these that i am missing?
    Any help would be appreciated

    I have been asked to set up an Icloud account by Apple.
    How will having another icloud email benefit me. I have my work email which is all i require, but had to set up a @me account to get email on my Macbook.
    I have a Mac computer that i upgraded to Mountain lion, a macbook pro and an iPhone 4s which has the latest software. all i want is simplicity and to have one email account which which will not duplicate everything 4 or 5 times.
    My notes are duplicated, i have to delete my emails individually on all devices so whenever i put my phone on, all the emails i have deleted at work re-appear on my phone and again the same thing happens on my Macbook pro. I seem to spend all my time deleting emails 3 times.
    Is there something simple in the set up of these that i am missing?
    Any help would be appreciated

Maybe you are looking for