My works ip4 will not display contact names in my fav's and only has stored email contact addresses in contacts

My works IP4s has developed a problem. my Favourite contacts appear as numbers instead of names. if i try to re-create they will not store. also my contacts in the contacts have gone leaving only those with an email address. I have tried shutting down etc and re-inserting sim. but problem persists.

This is inevitably caused by duplicate entry, (many posts already exist) check settings in options in contacts and make sure memory in use is phone memory. Then you need to go through contacts and make sure you don't have more than one name attached to each number  .
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • When i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas?

    when i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas what is wrong?

    when i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas what is wrong?

  • Firefox start up page will not display/load correctly. I have removed and reinstalled with no luck.

    When I click on Firefox, the icon will appear as if the page has loaded. When I rest my curser over the icon it will display an un-interactive, small window, but will not load an active, full size window. I am unable to find "Troubleshooting Information" as listed below.

    Can you start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key?
    You can use one of these to start Firefox in <u>[[Safe Mode|Safe Mode]]</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    *Help > Restart with Add-ons Disabled
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • My Iphone 4s says connected to TV and will not let me watch any videos on Safari, and only plays sound through the device. I have not messed with the settings, and have not connected it to anything bluetooth either. It's update is IOS 6.1.3

    I have an Iphone 4S and It won't let me watch videos on my safari, which I do everyday. It says that I am connectef to a tv, yet I have not connected it to a tv during the entire time i've owned this product. I have not connected it to anything bluetooth either. It plays the sound through the device, but it will not play the video at all. the update is IOS 6.1.3

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • HT1414 Hi there, my I pad series 2 has a black screen, it will not power up when attached to a laptop, and only shows black screen and Apple icon when attached to a mains power source. Any thoughts please? Allan

    Hi there my Ipad 2 has a black screen, will not power up and will only have an Apple icon when plugged into a mains power source. It will not power up when connected to a laptop. Any thoughts please?
    Regards,
    Allan

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • A pdf file will not display in a new window in FF12 (and many previous revisions)

    There appear to be several different ways to display a pdf file from a browser. One is just opening another tab and displaying the file. This way works. Another option is a 'download' window will open up downloading the pdf file which can then be displayed successfully. A third way is that another external window opens with some application verbiage displayed which is then overwritten by the actual pdf file. This method does not work for me. I have to go to Chrome or, pardon the expression, IE, to get the pdf files displayed in this manner.
    I have a jpg of the opened window with no pdf data displayed but I didn't know how to include it.
    Thank you.

    Can you try in safe mode please?
    http://kb.mozillazine.org/Firefox_Safe_Mode

  • I save two copies of an image, one jpg, one tiff.  LR will not display the jpg or let it be available, only the tiff.   When I try to put another copy of the jpg into the folder LR says the jpg is already there.e

    I converted an rgb image into a grayscale image and saved two copies, one jpg, one tiff, into my chosen folder.
    I tried to import both into LR, which only showed the tiff in the import dialogue.  After import LR only shows the tiff in the folder but when I try to insert the jpg into the folder using Explorer LR reports that the jpg is already in folder.
    How can I get LR to display this jpg image?

    Hi,
    I have an example here that is intended to demonstrate the difference between Positioned and Flowed subforms: http://assure.ly/i8pSdy.
    This shows how you can use a slider to change the dimensions of the image object.
    I have extended this to an example with buttons to scale the image: http://assure.ly/i8ZI5Y
    This may not be fine enough for your purposes, but it may give you some ideas.
    Good luck,
    Niall
    Assure Dynamics

  • Srpy menu bar will not display

    Was working away on modifying a spry menu bar when all of a
    sudden the menu bar will not display. Tried creating a new page and
    inserting the menu bar and still will not display. Won't even
    display in previous pages created.
    Anybody have any ideas?
    Thanks

    The following code calls the MenuBar widget into your
    document, but the widget will not be found, if the code that I
    provided you is not properly formatted.
    <script type="text/javascript">
    <!--
    var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1",
    {imgDown:"SpryAssets/SpryMenuBarDownHover.gif",
    imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
    //-->
    </script>
    When I insert a SPRY widget into my document the Javascript
    and CSS files that construct and determine the appearance of the
    widget are automatically placed into a folder called SpryAssets. My
    document is housed in a different folder. Thus, I must exit the
    folder in which my document is contained before entering the
    SpryAssets folder. When I read your href attribute it appears that
    your SpryAsset folder and your document are located in the same
    directory folder. If this is true, then I do not understand why
    your widget does not appear.
    I can offer two additional suggestions, and then my knowledge
    of what might be wrong is exhausted:
    1) If possible insert the widget again using a previous
    version of your document in which the widget has not already been
    inserted.
    2) Always make sure that your document has been saved at
    least once before inserting a SPRY object. This will insure that
    everything is properly linked when the widget is inserted.
    In the meantime, maybe someone more knowledgeable than I will
    be able to help.

  • Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main  Dell computer and my Iphone. Any ideas?  Duanekot

    Overnight, the taxt body of emails will not display for all messages in the inbox.  Only the From and To and a subject line display.  All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully.  Any ideas?? Duanekot

    See if this helps .... Reset the iPad.
    Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

  • My iphone 4 (running iOS 4.3.3) will not display my music library

    It all started when I wanted to add a new song to my library.  I forgot how to add it and accidently clicked sync, but then remembered that it would erase my library so I canceled it early.  After that my phone froze, I restarted and this is where I am at now.
    My music library only shows up in iTunes when my phone is plugged into my PC and it shows that my muisc library is still all there, as seen here:
    When its not plugged in and I goto to my iPod App, this is what I see and it doesnt change!:
    Oh and it also will not display my photo library on my phone and it also says its updating and is stuck there.
    What can I do to fix this?  I have had no problems with this phone yet and this is very frustrating.  Everything else on the phone is in wokring order though.. calls messaging and purchased apps
    thank you
    Bryan

    Do these other individuals actually have iDevices?
    Are they having issues sending/receiving messages from others?
    Can they successfully send a message to you?
    Honestly, nothing about what you describe sounds like an issue with your device or Apple ID.

  • My iPhone 4s will not display my saved contact names anymore. What to do?

    All of a sudden, my iPhone 4s will not display any of my saved contacts names or pictures.  It only shows the number.  However, it will show my facebook contacts names and info.  I currently have iOS 7.1.1.  I I've tried turning my phone off and them back on and still nothing.  How do I get it to show my contacts again?

    Hi Haleynichole_99!
    I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I'm at work and my Mac book pro is saying its connected  but will not display a web page. Others who have the MacBook is connected. Tried to restart. Please help

    I'm at work and my MacBook Pro is connected wifi but a web page will not display. Other have the pros and is connect. Tried restarting but not working

    You're not a liar. They should not charge you $90, it is within the 1-year warranty that comes with it and you are entitled to a free replacement. I have never had the problem myself on a 15 month old MacBook, so there must be SOMETHING that happened to it, maybe without you noticing. But might I recommend a wireless trackpad or Apple "Magic Mouse?"

  • Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    If you think you're insane now, try maintaining those pop up menus.
    As far as I know, these menus have not been updated since FW 8, so 
    they are at least two versions old.
    Save yourself a lot of grief by avoiding those menus. There are many 
    other products on the market which do a much better job of creating 
    and maintaining this type of navigation structure.
    Read this link before you climb any higher on this slippery slope:
    http://apptools.com/rants/jsmenu.php
    There was another blog post by the fellow who originally wrote the pop 
    up menu feature, but I can't seem to locate it. Even he says stay away 
    from them.
    Not the answer you probably want, but I hope it helps, nonetheless.
    Jim Babbage

  • Ipod will not display track and artist name when i play a song

    ipod will not display track and artist name when i play a song... i cant see the the volume display to adjust it eiether. Everyting shows up in the menus just not on the now playing screen.... any suggestions?

    Try restoring your iPod. Just be aware that restoring will erase the hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

  • Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

    Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
    Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
    - I downloaded and installed the Windows Migration Assistant from Apple
    - My Mac recognized PC and displays passcode
    - The sasscode does not show / display on my PC
    - My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
    - Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
    I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
    Any ideas?  If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

    Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
    If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

Maybe you are looking for

  • 12 Month Old iPad 2 Running Rather Slowly?

    Hello, I own an iPad 2, and I have done so for about 12 months now. Now, when I bought it, it was running iOS 4.3, I believe, and it worked like a dream. Everything was smooth, apps ran perfectly - everything was great. However, when I upgraded to iO

  • How to create a linked data source with document libraries based on the same template?

    I use SharePoint Foundation 2013, SP Designer and Visual Studio 2013 to my needs. But there are several things which i don't get. I have a number of libraries which use the same template. I want to create a linked data source, that would contain them

  • I have an imac (intel) running 10.8.5.

    after upgrading to 10.8.5, a few months ago, I've noticed that after the imac goes into sleepmode (screen saver), the network connection is slow to reconnect or restablish to the internet. most times I have to close safari or firefox and restart the

  • How can I copy a PSK from one WLAN Controller to another

    I'm trying to replace a WLAN controller with a new one.  One WLAN is configured with WPA-PSK.  Nobody seems to know the key that was used. Anyone know if there is a way to extract the encrypted key out of a controller and put it into the new WLAN Con

  • FRM-41085 when opening headstart form qms0006f

    Hi, I am upgrading an 6i Forms environment to an 10g Webforms environment. Currently the application is running fine, except for all the Headstart forms (f.e. qms0006f, Preferences). If I open this form, I first get FRM-41085: Error getting Group Row