MySAP ERP 2004 / 2005

What new features are offered by mySAP ERP 2004 in MM module.
I have checked the release note but it speaks about FM and its integration , utility in MM and also few new BADIs.
Pl point out any other new functionality which was not there in earlier version and is now available in mySAP ERP 2004 or 2005 ???
Thanks

Hi Sagar,
Difference between version on functionalities you can find on the following link.
Give the source version (i.e. 4.6 C) and select the target version (i.e. ECC 6.0)
http://solutionbrowser.erp.sap.fmpmedia.com/
Release notes :
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/content.htm
Hope this helps.
Reward if useful
Aasif

Similar Messages

BPS with mySAP ERP 2004 vs. BPS 3.5

Hi all,
Whats is the context difference between Solution Consultant Financials - Strategic Enterprise Management - CPM & BPS with mySAP ERP 2004 certification exam and Solution Consultant mySAP ERP Financials Strategic Enterprise Management
CPM & BPS (SEM3.5) certification exam? SAP says that the former exam's BPS section includes :
Comparison of SAP system and SEM-BPS
Data basis for SEM-BPS
Integrated use of SAP system and SEM-BPS
Integrated business planning
Business plans
Planning design and architecture
Locking concept
Layout Builder
Interface between SEM-BPS and BW
Structure and characteristics of planning functions
Variables
Key figure model and account model
Data transfer structures and multi-planning areas
Planning folders
Web Interface Builder
Comparison of planning interfaces
Planning hierarchy in SEM-BPS
Hierarchies and attribute assignment in BW
Characteristic relationships in SEM-BPS
Top-down and bottom-up modeling
Realignment
however the first exam includes:
Focuses on integrating subplans for a business plan, such as planning results, overhead and personnel costs, investments, balance sheets, and liquidity.
Overhead cost planning with primary and secondary costs
Balance sheet planning using financial planning functions
Personnel cost planning
Liquidity planning and cash flow analysis
CPM part of both exams are same, but why there is a difference in BPS part?
I am planning to take Strategic Enterprise Management - CPM & BPS with mySAP ERP 2004 certification exam, I am wondering what you know about these 2 exams? What topics should I focus on?
Thanks,
Kaan

Hello Kaan,
the SEM 3.5 exam is simply based on an older version. You should take the mySAP ERP 2004 exam (or 2005 once this comes out). The BPS functionality has changed only marginally so it's not really a different, but it's nicer to have a recent certification of course
Regards,
Marc
SAP NetWeaver RIG

Is mySAP ERP 2004 is UNICODE compliant

Dear Friends,
We are planning to upgrade from 4.6c to mySAP ERP 2004.I would like to clarify is mySAP ERP 2004 is unicode compliant or not.Asking this I mean all the data will be organized in unicode format in the new system when we are migrating or not.
I would be happy if some one can let me know efforts that are need to upgrade from mySAP ERP 2004 to 2005.
Thanks & Regards
Mrutyunjay

Unicode and non Unicode systems can co-exist in the same server, indeed. I have done it several times without any issues. Is it a fresh installation or a conversion? Make sure that you follow the SAP recommendations for additional CPU/RAM/disk space if you convert
HTH
Andreas

R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004

Dear All,
We are finalizing a proposal to upgrade our ancient SAP 3.1H system. Fortunately there are a number of options available to us and we need to know the differences between them.
We would be very grateful if anyone has any information regarding the PRO's and CON's of each of the above options in the subject title e.g.
what are the differences between mySAP ERP 2003 and 2004?
Is there a web page or document that summarises this information? What are the advantages of ECC5?
And the big question, what is the best way we can justify to our board an upgrade to anything higher than SAP4.7??
Any links/suggestions/documentation would be greatly appreciated.
Nigel Blanchard
Business Analyst

Hi Nigel,
Just to help narrow down you decision: ECC 5.0 is part of mySAP ERP 2004 so this is one choice. My suggestion would be to go to the latest version that you are comfortable with. Most companies are choosing mySAP ERP 2004 over SAP R?3 Enterprise (the 4.7 release you mentioned). There are a few companies who are planning for mySAP ERP 2005 which just entered ramp up.
It really comes down to two factors: What business functionality would you like to have access to and how leading edge does your company want to be?
The safe choice is mySAP ERP 2004 but if your company does not do upgrade with high frequencies (i.e. still on 3.1H) you may want to consider the mySAP ERP 2005 release.
Customers are really happy mySAP ERP 2004, I would suggest that you ask the question to some of the SAP user groups (like ASUG). They should be able to confirm this.
Cheers,
Mike.

Source system icons changes when connecting SAP BW to mySAP ERP 2004

Hi,
Just an Interesting observation in relation to the creation of source systems in SAP BW to SAP Web AS 6.40 based systems (mySAP ERP 2004, mySAP SRM, etc).
I thought it would be interesting to share!
The behavior is logical but can be a surprise for a BW administrator who is not aware of the new internal SAP BW systems within mySAP ERP 2004.
Scenario:
The customer was connecting a stand-alone BW system to two new systems with latest and greatest mySAP ERP 2004 (ECC 5.00) and mySAP SRM.
Observation:
In the past the SAP R/3 source system would be created with a "SAP R/3 icon" indicating a SAP Source system.
As of mySAP ERP 2004, the source systems will be created in the SAP BW standalone system with the "SAP BW System icon".
Note: This is also the same behavior for new releases of mySAP SRM, and other SAP applications that are based on SAP Web AS 6.40 or greater
Why?:
The standalone SAP BW system is connecting to a system that contains an internal SAP BW system. The standalone SAP BW system determines that it is possible to extract both from the internal BW System and from the Plug-in extractors. It simply denotes that this source system is a SAP BW system and uses the BW Source system icon. (Remember SAP BW is client independent*!).
Note: This behavior will still occur even if you do not use the internal SAP BW system within mySAP ERP! It is there whether you use it or not.
Second Note: You can still use the ERP Content extractors from the mySAP ERP Source System as you did in prior releases.
Another related observation:
I would expect that this case will probably be true even if you only use the internal SAP BW.
Scenario: You use the internal SAP BW in another client in the mySAP ERP system than your ERP processing.
Result: The connection between the BW client and the ERP client source system(s) (i.e. client 001 for ERP, client 100 for BW), both the 'myself' and ERP client source systems, will show up as BW source systems!
Source system 001 and source system 100 will be displayed as SAP BW icons because SAP BW is client independent*
user master and authorizations are client dependent
I hope this was interesting.
Cheers,
Mike.

Hello,
I used my user id to login. I recieved a message :
User already exists in source system I continue:
Anothre window pops up : "Check RFC connection" and it asks
'RFC connection already exists in source system . Do you want to check, use or cancel source system connection'
Here I select Use - but i get an error : Error in source system'.
how can i track down this error.
Kindly inform.
Regards,
Nikekab

MySAP ERP 2004 ECC5 installation on Unix Cluster

hi
I want to install mySAP ERP 2004 ECC5 ABAp component on HP unix 11i cluster. Please let me know the procedure. What are the details I have to give to HP person .
The installation will active-passive ie ci and db will be in the same system.
What are all mount points should be in the cluster and in the local system
Please reply ASAP
Regards
Prasanna.B.S

hi Penbury Young
Thanks for your suggestion, I have installed the mySAP ERP 2004 on HP UX cluster. We are facing one problem, when we move package to second node we are unable to login. Why is it so.
We are able to login to the server in Node 1
please help me out
Regards
Prasanna.B.S

Java programming in mySAP ERP 2004

Greetings
With mySAP ERP 2004, Can I do java programming instead of abap programming?. My intention is not to depend on ABAP programmers for simple tasks.
Thanks
Gonzalo

No, the core system still runs on ABAP. You cannot use java to develop business logic in R/3. It all runs on ABAP. You can however use java on the frontend and talk to the mySAP ERP 2004 system on the backend via RFC calls.
Regards,
Rich Heilman

Changes in ABAP programming 4.7 - mySAP ERP 2004

Hello,
are there any changes or obsolete ABAP commands concerning the upgrade from 4.7 to mySAP ERP 2004?
Are there any documentations on this topic?
Thank you in advance.
Best regards,
M. Weiskat

Hi,
Refer to the link..
These link talk on these issues..
http://sap.ittoolbox.com/groups/strategy-planning/sap-projectmanagement/r3-47-vs-mysapsap-enterprise-883745#
http://www.absoft.co.uk/absoft/web/site/AbsoftSAPServices/Upgrade.asp
Also refer to this PDF topic
Upgrade Dilemma SAP R/3 Enterprise
or mySAP ERP?
at this link...
http://www.infosys.com/sap/Whitepaper_Upgrade_Dilemma_SAP_R3_Enterprise_or_mySAP_ERP.pdf
Regards,
Tanveer.
Please mark helpful answers

Web Dynpro Screen in ESS for mySAP ERP 2004

I have uploaded the Business Package for ESS for mySAP ERP 2004 and I am expecting the Webdynpro screen to be seen, but unfortunately I am able to see only the typical R/3 screens ...
our
R/3 ver ECC 5.0
EP 6.0
Any suggestions ?

If you are using ESS for ERP2004 BP, have you deployed the XSS WebDynpro Components (PCUI100, ESS, MSS .SDAs) to your J2EE Engine?
Cheers,
Steve

GIS integration with mySAP ERP 2004 Jco version?

Hi guys,
Which version of JCO connector will connects the mySAP ERP 2004? while integrating GIS integration with mySAP ERP 2004 .
Thanks in advance
Regards
Rgdasari

Hi Rgdasari,
SAP always recommends to use the most recent release of the frontend components, including the connectors. Hence you should get the most recent release of JCo - SAP JCo Release 2.1.6.
You can download it from http://service.sap.com/connectors - you will need to provide your SAP Service Marketplace User/Pass.
Regards,
Mustafa.

MySAP ERP 2004 XSS

Hi experts
I have installed both the ESS and the MSS ITS based buissness packages.
I have downloaded the new mysap ERP 2004 buissness packages those are based on Web dynpro and java.
do i need to install the full ERP 2004 as a backend to deploy those components ?
Note : my portal version is 6.0 and is installed on the WAS 6.40 Java version
One more thing will i need to install the ABAP WAS to deploy those packages?
Thanks in advance..

Hi Ahmed,
What is your requirement?
With which version of R/3 do you want to use ESS/MSS?
ESS/MSS solutions are of two types
1) ITS Based till ECC 5.0 or mySAP ERP 2004 and below
2) WebDynpro based from ECC 5.0 or mySAP ERP 2004 and above.
So first decide on which version you want to use.
So if you want to use the WebDynpro based solution, you need to have mySAP ERP 2004 as your backend.
Regards,
Shubham

Modify code for MSS/ESS in MySAP ERP 2004

Hi,
I have ECC, mySAP ERP 2004, NW 2004 and need to modify standard MSS in compensation management. I imported the MSS sca into the development track but unable to get the code of ecm. Isnt this migrated in NW2004? If not how do I get the par files or source code for editting the ecm of MSS.
Please help,
Dhanya

1 - Is it par files or WD in ERP 2004 for compensation Management ? Can you tell me where can I download the standard par file ?
In ERP2004, we had par files. You can download the business package from - https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio. When you unzip the zip file, you can see the par files there.
2 - whether it is a right approach to download the standard par file, change and export it to reflect the changes liek normal portal projects?
You shouldn't be changing the standard code. Once changed, support from SAP becomes difficult. But anyways, once changed it can surely be exported like any other object.
3 - I have new WD ESS and MSS also so can I do a SCA for both the WD components and pars of portal applications into the same SCA? What is the best practise ?
Ideally, WD applications and Portal Applications should be bundled in different SCA files. The reason being, WD can be stand-alone applications running on J2EE engine (though in your case it is not) but Portal applications are meant to run in the Portal Runtime.
Regards,
Sunil

ESS: Room Booking in MySAP ERP 2004

Hi All,
I am creating Room Booking service. I dont find any standard link in ESS. Has anyone created Room Booking in MySAP ERP 2004. Is any workflow attached with this service.
Can PP30 transaction serve the purpose.. I dont the correct functionality of PP30..
Pls help me..
Thanks & Regards,
Mahesh.M.R

hi,
i have the same question, also we would like to implement ESS Room Reservation, i need a help on this please, which IMG need to be maintained? what is the path? .. is PP30 the one or not ..
we are 4.6c, ITS
regards
Abdulrahman

Interface setting in mySAP ERP 2004

Hi All,
How we can set the size of fonts in mySAP ERP 2004?
Thanks in advance,
Aleksandar

Hi,
Are you talking abt setting font size for SAP GUI?
Please check this.
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/e53c418f35ef23e10000000a155106/content.htm
Regards,
Siva
P.S: Award points if you find this useful.

MySAP ERP 2004 Installation with MS SQL server database

Hi all,
I m trying to perform the DB instance of mySAP ERP 2004 on a MS SQL Server, but during the process of SAPSSEXEC
the my MS SQL server stops and I the SAPSSEXEC.log files ends up with a fatal error:DB connection failed.
I stoped and restart the installation but the same error repeats. Can anybody try to help me out in this regard.
Thanks
Yogi

Hi Yogi
I am facing the same problem as you:
I have been installing ECC5 SR1. The Centrale Instance installation happened very well.
The problem is with The Database installation. At the phase 16 of 29, Database load, the R3load jobs take more than 21 hours and often finish with the following sql error message in the log files:
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX [DD03L~1] ON [DD03L] ( [TABNAME] , [AS4LOCAL] , [POSITION] , [AS4VERS] ) )
DbSlExecute: rc = 99
(SQL error 21)
I am working on :
- Windows 2003 server
- The DB is on
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86)
I come all the way to read that you have solved the same problem. Can you help me please.
Thanks.
Belehego

MySAP ERP 2004 / 2005

Similar Messages

Maybe you are looking for