Myson-Century CS8818 USB Mass Storage Driver Disk INSTALLATION

Hello,
I'm trying to install a Myson-Century CS8818 external USB Mass Storage Driver Disk, but can't find the appropriate driver for it and iMac G5 !
I tried Myson-Century's web site, driverguide.com and apple.com, without any successes...
Could you help ?
Thanks !
Lawrence
iMac G5   Mac OS X (10.4.4)  

Hello,
Thank you for your answer.
Actually, I known I should not need any drivers to install any USB Mass Storage Drivers Disks, but this one will not appear on the desktop when connected to the iMac.
Even though the Myson-Century CS8818 USB Mass Storage Driver Disk was connected and powered before booting, it remained unshown...
Would you have an advice or an idea ?
Thanks,
Lawrence
iMac G5   Mac OS X (10.4.4)  

Similar Messages

  • Windows 7 64-bit not loading USB mass storage driver

    I have a rather strange problem with my Windows 7 Ultimate 64-bit.  Everything seems to work fine except for USB mass storage devices.  I have USB keyboard, mouse and even a USB audio (wireless headset) all working fine on the computer.  But
    any USB external drive, thumdrive or USB card reader with flash cards inserted into the USB port of my computer won't work.
    Windows keeps reporting that it is unable to find the driver.  When I go into the Device Manager console and choose to manually update the driver, then point it to the C:\Windows (with search for sub-directories enabled), it detects the USB Mass Storage
    driver but complains that it is unable to load it.  The exact message is this:  Windows found driver software for your device but encountered error while attempting to install it.  USB Mass Storage Device.  The system cannot find the file
    specified.
    This happens to ALL USB Mass storage device, and it doesn't matter which port I plug the device into.
    Here's the weird thing, I have VMware Workstation installed on this computer and if I power on a VM that runs Windows 7 32-bit as the Guest OS and connect the USB storage devices to the guest OS via VMware Workstation, the USB storage devices work!
    So it would appear that the USB ports are functioning properly but for some reasons, my Windows 64-bit is unable to load the driver.
    Any idea how to fix this besides a "nuke it from orbit" and format/reinstall Windows?
    Thanks.

    I'm very excited to finally have a solution for this problem. Thank You Balaji for figuring this out. I've been struggling with this for a number of years, and had only one USB Hard Drive that worked. I too have VMware workstation, and had the missing files
    in "c:\windows\inf." I can say with certainty that I did not delete the files from that folder, but something is common in both of our situations. Maybe it has to do with VMware, and some of it's updates over the years. I'm also using nCompute to share out
    a networked desktop via the wire. 
    One more thing worthy of mention is this machine was an update from Windows Vista, and the USB hard drive that worked was configured back than. So although I could never add another HD, at least I had the one.
    Now with having copied over the files, I can plugin other USB enclosures with different drives and they too are working.
    Like you mentioned, it was always possible to use USB devices within my Virtual Machines, so it was clear that the USB ports were functional. I actually got the files from a clean Windows 7 VM, copying out the \windows\inf folder and doing a compare between
    the the real one and the virtual one. I found the two missing files you mentioned, along with 8 others. I went ahead and included them all in your fix.
    It worked, Amazing. Thanks again. :O)

  • Usb mass storage driver is giving '!' mark

    After working continuously for a long period my system becomes unable to recognize pendrive. At that time USB mass storage driver in driver manager gives '!' sign. The problem disappears once i restart the computer. My notebook model is pavillion g6 & its only 4 moths old.
    Please Help me out of this. I need support badly...
    Dibyojyoti Koleh 
    This question was solved.
    View Solution.

    Hi Dibyo,
    Welcome to the HP Forums! I saw your post about the USB issues and I will be happy to help. How long is a long period of time? I am going to need your product number because there are several models in the Pavilion g6 series. What operating system are you running?
    Find your product number on a notebook:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
    Finding your OS:
    http://windows.microsoft.com/en-CA/windows/which-operating-system
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • USB MASS STORAGE DRIVER DEVICE CODE 10

    AFTER INSTALLING UPDATES, CONFIGURATION STARTS, BUT FAILS AFTER 30%. THIS IS DUE TO A USB MASS STORAGE DEVICE
    FAILURE, A CODE 10 ERROR. HOW CAN I CORRECT THIS PROBLEM, I'VE TRIED DOWNLOADING DRIVERS, BUT I AM CURRENTLY
    USING THE LATEST VERSION OF THIS DRIVER. HELP!!!

    Check the following link and find the part of the text "Common resolutions for Code 10 error".
    http://support.microsoft.com/kb/943104/en-us

  • USB mass storage driver

    Not able to find updated driver for  USB mass storage device.Please help me to find or any possible ways to resolve it.

    Please try downloading the driver from the below shown link and let me know how it goeshttps://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3467&DwnldID=23734&keyword=USB+3.0&lang=eng  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

  • Windows 7 Installation problem: "no drives were found, click to load driver to provide a mass storage driver..."

    I just purchased a Toshiba Satellite laptop (U945-S4140) that came with windows 8. I am trying to install windows 7 enterprise 64 bit.
    I have the installation file on a bootable USB stick. In order to boot from the USB, I have to go into the BIOS settings and change from UEFI to CSM boot mode. Then the computer will boot from the usb stick and the windows 7 installation begins to work fine.
    However, I soon get an error message that "no drives were found. click to load driver to provide a mass storage driver for installation."
    I cannot figure out how to proceed. Any help would be greatly appreciated.
    Cheers

    Hello Maxxpower33, thank you for your words.
    I looked through the error logs that could be generated from the tool and found this one which may be what you experienced.  Kindly let me know if this is what you got:
    "Files copied successfully. However, we were unable to run bootsect to make the USB device bootable. If you need assistance with bootsect, please click the "Online Help" link above for more information."
    Some further information is that I found this post where another user experienced the same error on a laptop, although the speculation mentioned in the post is that the user does not have a Windows store account under which he purchased the license for Windows
    7 Home Premium, which is the flavor he was trying to get on the bootable drive.  However, this does not seem to be a valid response due to the fact that the tool does not check Windows XAuthCert Servers for validation on licensing.  So ignore that
    portion of the post, but the 2nd post helps a bit by linking to another article, providing both below.
    Forum Port With Same Error
    Article with 4 methods to create
    a bootable Windows 7 USB Drive
    In that first post, further down, is another reply to a tool that I have not tested with.  So please use caution on this one as I cannot find very much feedback other than on their own website, but sounds much like the first tool I mentioned in my first
    post "Unetbootin", but this one is called Rufus, and two people did mention they had good success with this tool after having difficulties with the Windows utility.
    Rufus
    After all that is said and done, there is not 1 tool that will work for everyone all of the time on every environment.  Why?  I would like to know also...but speculate hardware/firmware/bios combinations could be the culprit.  One of these
    tools should work for you and it would be my recommendation to try them in this order (skipping what you've already tried):
    1) Windows 7 USB/DVD Download Tool
    2) Unetbootin
    3) Manually creating the partition and xcopy'ing the extracted ISO to it
    4) Rufus
    5) Borrow a PC with a DVD-R in it and burn the ISO to a disc and install from it.  If your laptop does not have a DVD drive, an external drive can be purchased for roughly $25 or less.  Or if you have an internal drive laying around, buy an enclosure
    for about $15 and put the drive inside there and attach it to your laptop via USB or eSATA.
    As always, my advice is nothing more than my opinion, which are like bungholes...everyone has one and they all stink!  LOL!
    John Fester

  • Conflict w/Other USB Mass Storage

    I have tried 2x now to get the iPod Shuffle and my Segate Free Agent USB Mass Storage drive to co-exist to no avail. I have re-lettered the iPod to another drive letter, although it defaulted to G and my Mass Storage is F. I have tried changing USB slot positions, nothing. I looked at the MS site and looked at the fix for New Drive or Mapped Network Drive not available and at this point have not applied the hot fix. My USB driver is version 5.1.2600.0 from July 2001.
    I am about ready to give up on the iPod unless someone has a suggestion.

    I was having the exact same problem with a Seagate Freeagent 250GB and 2 different shuffles. I just got it resolved. I had to add a pci usb2 card to my system. I was looking in the device manager and noticed that there was only 1 usb2 controller listed. I guess my system could only handle 1 usb2 device at a time. You'd think one device would default back to usb 1.1, but I guess not.

  • Ovi suite messed my computer and usb mass storage ...

    I had lots of problems with my C6 and had to backup it with Ovi suite before sending to nokia service.
    Now I have uninstalled Ovi suite and can't connect my phone anymore as a  usb mass storage drive. I also found out that while installing Ovi suite, it wasn't the only nokia program that got installed to my hard drive.
    How I can not connect my phone again as a mass storage?
    Win xp, sp3
    And I also WANT EVERY NOKIA APP OFF MY COMPUTER. Why this ain't happening while uninstalling ovi suite (which was the only app that I wanted to install)???

    Hi,
    I guess the installation of Ovi Suite is corrupted, please follow the steps provided below to assist you in this regard
    Step 1
    - Go to Add/remove Control Panel
    - Click Ovi Suite
    - Click Repair.
    Once repair is completed then please restart computer and check.
    If Step 1 didnt work, then try the below step
    Step2
    -Go to Add/Remove in Control Panel
    - Click Ovi Suite
    - Click Uninstall
    Also uninstall the following f
    - Nokia Connectivity Cable Driver
    - PC connectivity Solution
    Then right click my computer, click manage.
    - Device Manager-Ports- If you find anything by name Nokia please unistall ( Dont remove anything else)
    Then reinstall windows Installer from the link provided below
    For Windows 7 & Vista
    http://msdn.microsoft.com/en-us/library/cc185688(v​=vs.85).aspx
    For Windows XP
    http://www.microsoft.com/downloads/en/details.aspx​?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4&dis​...
    - Then restart computer.
    - Download and install Ovi Suite
    - Restart Computer again
    - Connect the device, dont open Ovi Suite and wait for all the driver to be loaded by windows.
    - Once done then lauch Ovi Suite.
    - Check for the issue
    Hopefully this helps
    Cheers
    Show appreciation by clicking the kudos star :-), or gesture by typing thanks

  • IPOD seen as two drives(USB Mass Storage & and Dell USB )

    My IPOD classic has not worked properly since I updated my OS to Windows XP. At first the IPOD was seen as two different USB controllers (Apple USB Driver, and a USB Mass Storage Device) I've gone through every troubleshooting article on the apple website. After downloading a hotfix, my computer recognizes the IPOD as an IPOD but it doesn't connect to itunes long enough for me to restore it. It automatically disconnects after being plugged into the computer. If anybody can help, please, please please let me know.
    Thanks.

    I just purchased an ipod classic 120GB and after downloading itunes to the computer I can no longer use my DVD/CD drive as the ipod is using that drive now, which is the E drive on my computer. I noticed that if I uninstall itunes I get to use my DVD/CD drive again. I do not know what next to try either. So my ipod is seen as a mass storage device, I need help too, can anyone help?
    zndrsmith

  • PCI Communication Controller and USB Mass Storage Device driver was missing

    Hi,
    Recently i formated HP Pavilion Slimline 400 PC series and reinstalled with windows 7 32 bit.\
    initially i found a lot of driver was missing. i have gone through hp support forums and almost all drivers are running on 64 bit with minimum requirement OS windows 8.1.
    i couldn't find it anywhere. under device manager, these two devices are being shown with yellow exclamation
    PCI Simple Communication Controller :
    PCI\VEN_8086&DEV_8C3A&SUBSYS_2AF7103C&REV_04
    PCI\VEN_8086&DEV_8C3A&SUBSYS_2AF7103C
    PCI\VEN_8086&DEV_8C3A&CC_078000
    PCI\VEN_8086&DEV_8C3A&CC_0780
    USB Mass Storage Device :
    USB\VID_054C&PID_02A5&REV_0100
    USB\VID_054C&PID_02A5
    Please kindly provide the link for the drivers, so i can use my PC.
    thanks in advance

    Hi:
    Did you install the USB3 controller driver so the device you installed could work?
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21129&lang=eng&ProdId=3467
    The USB Mass Storage Device is something you have connected to the PC.
    Specifically a Sony® MicroVault USB Flash Drive.
    If my suggestion to let windows update find the Intel Management Engine driver, didn't work, see if this driver from Intel works.  It also has the hardware ID for that device in the setup information file.
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22093&lang=eng

  • Macbook 2012 Mid: Can't mount USB mass storage after upgrading to Mavericks

    Hi guys,
    I'm having big problems with USB mass storages. After upgrading to Mavericks my Mac doesn't see some USB storage devices (mostly USB sticks and Android phone's memory cards via USB. My external USB 3.0 hard disks work fine) at all even though the devices themselves (for example my Android phone) are clearly recognized according to the System Report. When I plug them in, they don't show up on my Finder or on Disk Utility.
    I've searched everywhere and it seems like some other people are having the same problem, none seems to offer a definite solution. I've even formatted my HD and reinstalled Mavericks from the recovery partition. Now it mounts a USB stick that was in one of the USB ports at the time of installation but still doesn't read anything else! The funny thing is when I boot into Windows 8 on my Boot Camp partition, I can mount any USB devices including the USB stick and the Android phone I'm having problems on Mavericks without any problems. I can even see then when I boot into the recovery so there's clearly something wrong with Mavericks.
    Any chance someone has figured out a solution for this? Apple should've address this long time ago.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem? Note: If the devices are not in Mac OS X format, they normally won't mount in safe mode, but they should appear in Disk Utility.
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Disabling of USB Mass Storage affects Default Printer setup

    When I try to disable USB Mass Storage using HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsbStor equals
    4, the default local Printer i.e. HP LaserJet Pro 400 - M401D stopped working.
    To avoid this thing, I have to once again enable the USB feature using
    3 and re-install the printer driver along with all its application.
    It never happened when tried in Windows XP Professional earlier.
    Can you please provide solution of this?

    Hi,
    In Windows 7, you can disable USB by following GPO:
    Computer Configuration > Administrative Templates > System > Removable Storage Access
    Removable Disks: Deny execute access Enabled
    Removable Disks: Deny read access Enabled
    Removable Disks: Deny write access Enabled
    Roger Lu
    TechNet Community Support

  • After USB mass storage plug - kernel panic

    My PB 15'' goes into Kernel Panic after I try to plug any USB mass storage device.
    Other USB devices (hdd, iphone) work fine.
    What can I do? I have a Leopard install DVD that doesn't contain Apple Hardware Test. Can I use the Apple Hardware Test I had on the Tiger disks?
    Did any of you experienced such a problem?
    How did you work this out (if so)?
    Regards
    F.

    Hi, Filippo. Use the Apple Hardware test that you will find on one of the discs that came with your computer. Instructions for using it will appear on the label of the disc that contains it. However, it may be of no use here: your USB ports must be working if some USB devices are recognized and usable, and AHT will not test any external device.
    Other USB devices (hdd, iphone) work fine.
    A USB hard disk drive (hdd) IS a mass storage device, so apparently not all mass storage devices cause the problem. What particular devices do cause the problem?
    Message was edited by: eww

  • Z87-G45 USB Mass Storage & other devices not working (except keyboard/mouse)

    My Z87-G45 died on me last month in warranty so I received a replacement one.
    Unfortunatly I'm experiencing mayor USB issues.
    - In Bios mode, no USB mass storage devices are detected (usb stick/disk). USB keyboard and mouse work fine
    - In Windows no USB device except for the keyboard and mouse are detected.
    - Can't see USB Mass Storage Device driver in the USB controllers list
    Installed all latest drivers + CMOS CLEAR just in case. Results stay the same.
    I assume it's best that I return the motherboard?
    Kind regards
    Frederick

    Quote from: frederick.dhont on Today at 02:43:46
    All drivers are already all up-to-date
    I also want to stress that USB mass storage devices are not detected in BIOS, NOR as bootable USB device. So I can't upgrade BIOS even if I wanted to.
    have you done >>Clear CMOS Guide<< with power cord removed?
    have you tested with mainboard out of PC case placed over wooden table?

  • USB Mass Storage Device - ?

    Shuffle shows up as a USB Mass Storage Device under the drive (USB Port) i plug it into.
    It will not take an update or reformat.
    Wondering if it is possible that the factory format could be erased and now the unit is just being recognized as a storage device and unable to be used in the manner it was originally intended for...MUSIC.?
    What does it mean when you get a message "Media in Drive - Changed" ?
    Fixed many other ipods in past but only one shuffle so far....now this one has me going...no clue what else i can do to it.
    Any help would be appreciated.

    i think it was trying to read the shuffle when i wanted to format and restore.
    i never did get it to work.
    no way of knowing now..i just got through tearing into this one to make one good shuffle out of the two i was working on.
    all was good till i went to put the slide bar on/off switch back on....broke the switch again.
    do you have a switch?
    thanks

Maybe you are looking for