N70 File restoration problem

Okay so i back up my phone's data (no problem there) and it was successful... But after a 3-4 weeks i decided to restore my phone to factory settings cause i thought something was wrong with it (confident that i wont have any data loss since i did a back up) so there i was restoring my data using the content copier and so this problem comes up MY Phone RESTARTS it'll just say intializing and then suddenly it'll just say cable disconnected and that's when my phone will restart.
So what can i do to fix this problem? Anyone experience this before? By the way i just bought my phone last july.
Thanks in Advance!

Hi ,
After configuring device type to "SBT_TYPE" controlfile format to %F and with below format it is still give error .
RMAN> run{
2> allocate channel t1 type 'sbt_tape' parms='SBT_LIBRARY=C:\WINDOWS\system32\orasbt.dll';
3> SEND 'NB_ORA_POLICY=ORACLE_DBMS_KTPH12_PROD_BTS_Daily, NB_ORA_SERV=b-nimhp1sys101, NB_ORA_CLIENT= b-btshp1dbs213';
4> restore controlfile to 'G:\oradata\TLPRD\control01.ctl' from 'c-985142448-20130217-01%/';
5> }
allocated channel: t1
channel t1: SID=152 device type=SBT_TAPE
channel t1: Veritas NetBackup for Oracle - Release 7.0 (20100104)
sent command to channel: t1
Starting restore at 11-MAR-13
channel t1: no AUTOBACKUP in 7 days found
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 03/11/2013 14:18:50
RMAN-06172: no AUTOBACKUP found or specified handle is not a valid copy or piece
RMAN>
Any suggestions ?

Similar Messages

  • Yosemite time machine file restore problem

    I'm trying to restore some files (iPhone backups) in OS X Yosemite, but am encountering a problem.
    I can locate the files I need in Time Machine. When I hit restore the 'Star Wars' UI exits as I would expect, and the 'preparing to copy files' dialogue box appears.
    At this point, it goes no further. I also get the following message in the console:
    15/11/2014 6:00:30.406 am Finder[236]: setting error: Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Unexpected character ‰ at line 1) UserInfo=0x60800067d7c0 {NSDebugDescription=Unexpected character ‰ at line 1, kCFPropertyListOldStyleParsingError=The data couldn’t be read because it isn’t in the correct format.}
    Any advice on how to address this will be greatly appreciated. I'm currently verifying the backup in Time Machine, but other than that I'm out of ideas.

    Jimbo, have you looked in the system’s Trash?  Just see if it needs to be emptied to free up space.  As Eric mentioned, I’ve only done a complete restore by wiping the disk, reinstalling the OS, etc. so I’m just guessing in your situation something is still lying around. 
    You could also look in Spotlight for a folder (whose full name I can’t recall now) that begins with the name “Previous System” or something like that in your boot drive; it is created to archive your previous system in case you want to revery to an earlier version.  If your system is fine now, it is safe to delete that folder - just remember to empty the Trash.

  • Help with add file name problem with Photoshop CS4

    Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
    Script follows:
    // this script is another variation of the script addTimeStamp.js that is installed with PS7
    //Check if a document is open
    if ( documents.length > 0 )
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.INCHES;
    try
    var docRef = activeDocument;
    // Create a text layer at the front
    var myLayerRef = docRef.artLayers.add();
    myLayerRef.kind = LayerKind.TEXT;
    myLayerRef.name = "Filename";
    var myTextRef = myLayerRef.textItem;
    //Set your parameters below this line
    //If you wish to show the file extension, change the n to y in the line below, if not use n.
    var ShowExtension = "n";
    // Insert any text to appear before the filename, such as your name and copyright info between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextBefore = "Lower© ";
    // Insert any text to appear after the filename between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextAfter = " ";
    // Set font size in Points
    myTextRef.size = 10;
    //Set font - use GetFontName.jsx to get exact name
    myTextRef.font = "Arial";
    //Set text colour in RGB values
    var newColor = new SolidColor();
    newColor.rgb.red = 0;
    newColor.rgb.green = 0;
    newColor.rgb.blue = 0;
    myTextRef.color = newColor;
    // Set the position of the text - percentages from left first, then from top.
    myTextRef.position = new Array( 10, 99);
    // Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
    myLayerRef.blendMode = BlendMode.NORMAL;
    // select opacity in percentage
    myLayerRef.opacity = 100;
    // The following code strips the extension and writes tha text layer. fname = file name only
    di=(docRef.name).indexOf(".");
    fname = (docRef.name).substr(0, di);
    //use extension if set
    if ( ShowExtension == "y" )
    fname = docRef.name
    myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
    catch( e )
    // An error occurred. Restore ruler units, then propagate the error back
    // to the user
    preferences.rulerUnits = originalRulerUnits;
    throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    else
    alert( "You must have a document open to add the filename!" );

    you might want to try the scripting forum howard:
    http://www.adobeforums.com/webx?13@@.ef7f2cb

  • File sharing problems and horror story (nearly)

    I use Leopard on a MacBook Pro, a MacBook and a iMac G4 800 MHz (unsupported model).
    I have on the iMac and the MacBook Pro many users (the same ont he two machines) and I always use Fast User Switching.
    I have had very few problems with Leopard until now; I like it even if there are some glitches or some new features which are not my cup of tea (hierarchical menus missing from the dock, stacks useless when there are many items, FireWall impossibilities (?) to open specific ports, Back to my Mac working on a Lan but not from outside until now, problems with a few apps (Parallels networking erratic), ...
    Now about File Sharing.
    Let say my main account is user1 (Administrator), and I have another user2 also administrator, plus user3, user4 standard users.
    On the iMac I activate File Sharing.
    On the MacBookPro, as user1, if I connect to the iMac Server (using afp://IPaddress_of_theiMac/) I do NOT get the dialog
    "Enter your user name and password to access file server YYY
    Connect to server as Guest or as Registered User"
    but I directly get the dialog
    "Select the volumes you want to mount on YYY"
    From this, if I select user1 it mounts with full read/write permissions which is normal. It appears that I am connected with my Apple account user1&mac.com (same as mentionned in the Account panel of System Preferences).
    On the other hand, if I try to connect to the user2 account, I only get limited access although in the File Sharing Preferences, user1/iMac is mentionned with full Read/Write preferences for the Home Folder of user2.
    What is very surprising is that if I log on the MacBook Pro as user2, or user 3 or user4, then connect to the iMac, I first get the dialog to enter a user name and a password. This gives me access with the correct full permissions on user1/iMac or user2/iMac using the corresponding user name/password pair; this is the usual behaviour which is missing when trying to connect from user1/MacBook Pro.
    Now for the Horror Story!
    Trying to understand what was going on with the permissions of the user2/iMac account, I logged in to the iMac as user1, went to the Users folder and from there had a look on the informations about user2 home folder. In the lower part of the pannel, Sharing & Permissions says "You have no access" (which is normal) and this is followed by a table where users and permissions are listed. It seems user1 has Read and Write access in contradiction with the preceding phrase...
    Anyway, I tried to modify these authorizations for user2 by clicking on the lock of the Information pannel and entering name and password of the administrator. Didn't go farther than that. By mistake, I hit Command-Delete and user2 was GONE from the list AND NOT ONLY from the list in the Information window! Using Fast User Switching and going to user2, nothing left on the Desktop and NO Home anymore.
    In the System Preferences/Accounts panel, user2 was still mentionned.
    In the Users folder, no user2 folder anymore.
    Using once again Fast User Switching, I logged as user2 and got by magic an all new Home. Nothing left in Documents, Library or other user1 folders. Standard settings for icons, dock, etc.
    My first move has been to use a very recent backup to restore everything (Thank you Mike Bombich from Copy Cloner!).
    Once everything was back to normal, I had a look at the Trash from user1 and guess what, the Home folder of user2 was there, complete.
    So now I am left with two questions
    why is it I do not have the same dialogs when connecting from all the accounts although as far as I can see, configurations are the same?
    why is it possible, from an Information pannel to delete the account of another user?
    Thank you all for comments!

    For the file sharing problems, answer is found in
    http://docs.info.apple.com/article.html?artnum=306723

  • ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062

    Hi,
    Version 11203
    I am trying to import schema into exadata machine using impdp.
    The impdp is failed to open dump file.
    Starting "ICCS"."SYS_IMPORT_FULL_01": userid=iccs/******** full=y TABLE_EXISTS_ACTION=APPEND
    DIRECTORY=EXP_FOR_EXADATA PARALLEL=4 DUMPFILE=exp_dataONLY_iccs_25062012_%U.dmp LOGFILE=exp_dataONLY_iccs_25062012.log
    Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
    ORA-31693: Table data object "ICCS"."INF_CALL_ERR" failed to load/unload and is being skipped due to error:
    ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062012_04.dmp" for read
    ORA-19505: failed to identify file "/restore/psdwh/exp_dataONLY_iccs_25062012_04.dmp"
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    ORA-31693: Table data object "ICCS"."CC_AGG3" failed to load/unload and is being skipped due to error:
    ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp" for read
    ORA-19505: failed to identify file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp"
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    . . imported "ICCS"."CUST_S"                         19.78 MB  580379 rows
    . . imported "ICCS"."CUST_SUM_CD"                    16.79 MB  843460 rows
    ORA-31693: Table data object "ICCS"."BILL_CUST_SALE_TMP_C" failed to load/unload and is being skipped due to error:
    ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp" for read
    ORA-19505: failed to identify file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp"
    .....I verified that the file is exist in the file system :
    [oracle@dm01db01 psdwh]$ ls -l /restore/psdwh/exp_dataONLY_iccs_25062012_04.dmp
    -rwxrwxrwx 1 oracle oinstall 701464576 Jun 25 10:36 /restore/psdwh/exp_dataONLY_iccs_25062012_04.dmpI verified that the file has the same permission as oracle user :
    dm01db01{oracle} /home/oracle >id
    uid=1000(oracle) gid=1001(oinstall) groups=101(fuse),1001(oinstall),1002(dba)I also verified that i have a the right permission on the directory ABOVE :
    cd /restore
    ls -l
    drwxrwxrwx  3 oracle oinstall         9216 Jun 27 19:15 psdwhI veified that the directory exists:
    SQL> select * from dba_directories;
    OWNER      DIRECTORY_NAME   DIRECTORY_PATH
    SYS       EXP_FOR_EXADATA   /restore/psdwhI have read,write permission on the directory to PUBLIC , and as you can see there are some tables which successfully imported:
    . . imported "ICCS"."CUST_S"                         19.78 MB  580379 rows
    . . imported "ICCS"."CUST_SUM_CD"                    16.79 MB  843460 rowsPlease note that i am getting such an error each time that i am using expdp with PARALLEL and having %U in the dumpfile name .
    e.g:
    expdp userid=iccs/iccs@psdwh  content=data_only EXCLUDE=statistics DIRECTORY=EXP_FOR_EXADATA
    PARALLEL=4 DUMPFILE=exp_dataONLY_iccs_25062012_%U.dmp LOGFILE=exp_dataONLY_iccs_25062012.logIf i am exporting without PARALLEL and %U , mean having just one dump file , i have no problem at all to import the file.
    Any Advice ?
    Thanks

    The issue is most likely due to the directory not being accessible from all nodes in the rac. If it works with parallel=1 but not parallel>1 then the other nodes that are being used to import data, and since the file exists, then please check that the disk is accessible from all nodes in the rack.
    Dean

  • Restored, Made Back Up Files, Restored them via Drive E

    Hi,
    I originally rececived the BSOD, so I made back up files, & restored the PC. I use Win 7 Home
    Now, I had to put the first of the 8 disks back into my PC. Then via E drive, I accessed the first disk, open it & at the fottom of the files was a Restore file or app. I clicked it & it said to put in Disk 2, then 3 & so on thru 8.
    But now, I open Libraries & under pictures, none of my pictures are there. But at the bottom in the left panel, under Computer, I see this:
    "Back up files 2014-05-17 171024"
    But when I open that, I see 93.win 8/17/2014 8:58 Win File
    & see that from 94.win to 99.win
    How do I get all my photos, music, documents, saved websites back?
    I thought once I backed them up, & restored them back into the reformatted HD of my laptop, they would all fall back into where they were
    Thanks for any/all
    Frustrated

    NatureMuzic wrote:
    Hi,
    Thanks & here's what you're looking for I hope! Bear with me as I have never had to go thru this.
    1: HP G72  B60us P/N: XG988UA#ABA
    2: Restore question, No, When the PC went thru it's own self repair but couldn't fix it, I followed the on screen choices. First I used 8 discs to back up all my files.
    Then I chose System Restore for out of box condition. I think you may mean HP system recovery. System restore is not the same thing. Perhaps you also meant HP factory image recovery. Is that the case?
    3: I then placed the discs one by one into the Notebook CD/DVD slot for lack of proper. Message on Screen asked me to place Disk one, then finished & asked for 2, thru 8.
    And clicking on the Computer Icon, it gave me Local C, Recovery drive, & Devices with removeable storage VD RW  Drive  (E File Backup 1
    I thought this would be easy!  Back up my files, via the PC, then after HD is reformatted, I insert the back up disks, & the photos go to My Pictures, all my music goes to WMP, etc. but early on, it very frustrating!
    Thanks again for all your help!
    What is the installed operating system?
    Did you use the HP recovery disk set or usb recovery media?
    Did you press F11 to access the Recovery Manager and then select factory image recovery?
    It may seem as if I am asking you many questions, but please bear with me as I must know exactly which programs you used.  The next time you have issues try booting into safe mode.  
    Restoring files backed up with Windows backup in Windows 7
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • BR-RESTORE problem

    Dear expert,
    we are facing a systax error problem in Prdouction server.
    after enquiry we concluded tht BRRESTORE is adviced to restore.
    the default unattended option is not preffered for PRD restoration:-
    BRRESTORE can run unattended when option -c force is set.
    How exactly that can be used, example of syntax ?
    can you suggest any other best options for BRrestore ?
    Will SAP start if i try to start sap after BR-restore ?
    what is the importance of BR-recovery, is that mandatory to do ?
    i request you to give your input.
    badly waiting for your inputs.
    thanking you in advance.
    By
    Raghavendra
    Points assured. ####

    CDPRD:oraprd 60> brrestore -m full -b bdvslmwp.aft -c
    BR0401I BRRESTORE 6.40 (22)
    BR0405I Start of file restore: rdvsuwwe.rsb 2007-07-19 18.09.20
    BR0428W File /oracle/PRD/data/sapdata3/prd_1/prd.data1 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata3/prd_2/prd.data2 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata3/prd_3/prd.data3 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata3/prd_4/prd.data4 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prd_6/prd.data6 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prd_8/prd.data8 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prd_10/prd.data10 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prd_9/prd.data9 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prd_7/prd.data7 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prd_10/prd.data13 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prd_10/prd.data12 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prd_10/prd.data11 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata3/prd_5/prd.data5 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata1/prd640_1/prd640.data1 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata1/prd640_2/prd640.data2 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata1/prd640_4/prd640.data4 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata2/prd640_6/prd640.data6 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata2/prd640_8/prd640.data8 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata2/prd640_10/prd640.data10 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prd640_12/prd640.data12 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prd640_13/prd640.data13 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata3/prd640_11/prd640.data11 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata2/prd640_9/prd640.data9 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata2/prd640_7/prd640.data7 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata1/prd640_5/prd640.data5 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata1/prd640_3/prd640.data3 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata4/prdusr_1/prdusr.data1 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata1/temp_1/temp.data1 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata1/undo_1/undo.data1 will be overwritten
    BR0428W File /oracle/PRD/data/sapdata1/system_1/system.data1 will be overwritten
    BR0428W File /oracle/PRD/origlogA/log_g11m1.dbf will be overwritten
    BR0428W File /oracle/PRD/mirrlogA/log_g11m2.dbf will be overwritten
    BR0428W File /oracle/PRD/origlogB/log_g12m1.dbf will be overwritten
    BR0428W File /oracle/PRD/mirrlogB/log_g12m2.dbf will be overwritten
    BR0428W File /oracle/PRD/origlogA/log_g13m1.dbf will be overwritten
    BR0428W File /oracle/PRD/mirrlogA/log_g13m2.dbf will be overwritten
    BR0428W File /oracle/PRD/origlogB/log_g14m1.dbf will be overwritten
    BR0428W File /oracle/PRD/mirrlogB/log_g14m2.dbf will be overwritten
    BR0428W File /oracle/PRD/origlogA/cntrl/cntrlPRD.dbf will be overwritten
    BR0428W File /oracle/PRD/data/sapdata1/system_1/cntrl/cntrlPRD.dbf will be overwritten
    BR0428W File /oracle/PRD/saparch/cntrl/cntrlPRD.dbf will be overwritten
    BR0280I BRRESTORE time stamp: 2007-07-19 18.09.20
    BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
    c
    BR0280I BRRESTORE time stamp: 2007-07-19 18.09.27
    BR0257I Your reply: 'c'
    BR0259I Program execution will be continued...
    BR0280I BRRESTORE time stamp: 2007-07-19 18.09.27
    BR0407I Restore of database: PRD
    BR0408I BRRESTORE action ID: rdvsuwwe
    BR0409I BRRESTORE function ID: rsb
    BR0449I Restore mode: FULL
    BR0411I Database files for restore:
    /oracle/PRD/origlogA/log_g11m1.dbf
    /oracle/PRD/mirrlogA/log_g11m2.dbf
    /oracle/PRD/origlogB/log_g12m1.dbf
    /oracle/PRD/mirrlogB/log_g12m2.dbf
    /oracle/PRD/origlogA/log_g13m1.dbf
    /oracle/PRD/mirrlogA/log_g13m2.dbf
    /oracle/PRD/origlogB/log_g14m1.dbf
    /oracle/PRD/mirrlogB/log_g14m2.dbf
    /oracle/PRD/origlogA/cntrl/cntrlPRD.dbf
    /oracle/PRD/data/sapdata1/system_1/cntrl/cntrlPRD.dbf
    /oracle/PRD/saparch/cntrl/cntrlPRD.dbf
    BR0419I Files will be restored from backup: bdvslmwp.aft 2007-07-17 20.20.27
    BR0416I 35 files found to restore, total size 264320.932 MB
    BR0424I Files will not be decompressed
    BR0421I Restore device type: tape
    BR0102I Following backup device will be used: /dev/nst0
    BR0103I Following backup volume will be used: PRD2170707 (2007-07-17 20.20.27)
    BR0280I BRRESTORE time stamp: 2007-07-19 18.09.27
    BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
    c
    BR0280I BRRESTORE time stamp: 2007-07-19 18.09.40
    BR0257I Your reply: 'c'
    BR0259I Program execution will be continued...
    BR0126I Unattended mode active - no operator confirmation required
    BR0208I Volume with name PRD2170707 (2007-07-17 20.20.27) required in device /dev/nst0
    BR0280I BRRESTORE time stamp: 2007-07-19 18.09.40
    BR0226I Rewinding tape volume in device /dev/st0 ...
    BR0351I Restoring /oracle/PRD/sapbackup/.tape.hdr0
    BR0355I from /dev/nst0 ...
    BR0241I Checking label on volume in device /dev/nst0
    BR0209I Volume in device /dev/nst0 has name PRD2170707 (2007-07-17 20.20.27)
    BR0280I BRRESTORE time stamp: 2007-07-19 18.10.05
    BR0199I Volume label checked successfully
    BR0351I Restoring /oracle/PRD/data/sapdata3/prd_1/prd.data1
    BR0355I from /dev/nst0 ...
    BR0278E Command output of 'LANG=C cd /oracle/PRD/data/sapdata3/prd_1 && LANG=C cpio -iuvcB prd.data1 < /dev/nst0 && LANG=C mt -f /dev/nst0 fsf 1':
    cpio: warning: skipped 79322336 bytes of junk
    cpio: warning: skipped 542681129 bytes of junk
    cpio: warning: skipped 169089187 bytes of junk
    cpio: warning: skipped 4490772 bytes of junk
    cpio: warning: skipped 7297164 bytes of junk
    cpio: warning: skipped 3571036 bytes of junk
    cpio: warning: skipped 32560979 bytes of junk
    cpio: warning: skipped 2376064 bytes of junk
    cpio: warning: skipped 1269138 bytes of junk
    cpio: warning: skipped 613734 bytes of junk
    cpio: warning: skipped 13541613 bytes of junk
    cpio: warning: skipped 10854153 bytes of junk
    cpio: warning: skipped 80328255 bytes of junk
    cpio: warning: skipped 3251134 bytes of junk
    Found end of tape.  To continue, type device/file name when ready.
    BR0280I BRRESTORE time stamp: 2007-07-19 18.23.46
    BR0279E Return code from 'LANG=C cd /oracle/PRD/data/sapdata3/prd_1 && LANG=C cpio -iuvcB prd.data1 < /dev/nst0 && LANG=C mt -f /dev/nst0 fsf 1': 1
    BR0359E Restore of /oracle/PRD/data/sapdata3/prd_1/prd.data1 from /dev/nst0 failed due to previous errors
    BR0397E Verification of backup of /dev/nst0 using DBVERIFY failed due to previous errors
    BR0406I End of file restore: rdvsuwwe.rsb 2007-07-19 18.23.46
    BR0280I BRRESTORE time stamp: 2007-07-19 18.23.46
    BR0404I BRRESTORE terminated with errors
    Hi Eric,
    my Brrestore is getting terminated as follows.
    What is actually CPIO error.
    how to avoid these kind of error.
    plz reply to this
    thanking you in anticipation.
    by
    raghav

  • 2006 iMac running OS10.7.5 with File Vault problem stops boot up?

    2006 iMac running OS10.7.5 with File Vault problem stops boot up?  Upon login this message appears: Your home folder, which is protected by File Vault, didn't open. it needs to be repaired.
    It then asks:  To repair the folder and continue logging in press OK. To log in as a different user, click Cancel login.
    Clicking Ok
    You are unable to log in to the user account "xxxxxxxxxxx" at this time.
    Logging in to this account failed because an error occurred.
    When I click cancel to log in as different user I get he following message: You are unable to log in to the user account "xxxxxxxxxxx" at this time.
    Logging in to this account failed because an error occurred.

    This condition is quite difficult and time-consuming to recover from. If the procedure suggested here is too complicated for your experience level, get help from someone more experienced. One option is to make a "Genius" appointment at an Apple Store. Legacy FileVault should not be used under OS X 10.7 or later.
    If you have another user account with administrator status and can do so, log in to it and skip to Step 4.
    Step 1
    Boot into Recovery mode. The OS X Utilities screen will appear.
    Step 2
    Select
    Utilities ▹ Terminal
    from the menu bar. In the window that opens, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Select your boot volume if not already selected. Pull down the menu labeled Select the user account and select
    System Administrator (root)
    Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    Step 3
    At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 4 in the Password field. You should now be logged in. Do nothing while logged in as root except as indicated below.
    Open the Users & Groups preference pane. Create a new user and check the box marked
    Allow user to administer this computer
    Restart and log in as the new user.
    Step 4
    Load this web page in Safari.
    Triple-click anywhere in the line below to select it:
    sudo dscl . -delete users/fubar HomeDirectory
    Copy the selected text to the Clipboard (command-C).
    Launch the TextEdit application. Paste into the window (command-V). Substitute the short name of the FileVault user for the word "fubar".
    Triple-click the edited line and again copy to the Clipboard.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window. When prompted, enter the password of the user you're logged in as.
    Step 5
    You should now be able to log out and log in as the FileVault user. Your files still won't be available. FileVault is inactive.
    Locate the disk image file named "fubar.sparsebundle" or "fubar.sparseimage" at the top level of your home folder. Again, substitute the short user name for "fubar".
    Step 6
    Try to open the file. If it won't open, try to repair it in Disk Utility. If it still won't open, restore it from your most recent backup. Keep trying older backups until you find one that works. If you don't have a backup, the data is lost, perhaps beyond any hope of recovery. There's a slight chance that you might be able to repair the disk image using an expensive third-party application called "Disk Warrior."
    Step 7
    Copy the files from the mounted disk image to the corresponding subfolders of your home folder. The Library folder is invisible in the Finder. Open it by holding down the option key and selecting
    Go ▹ Library
    from the Finder menu bar. Open the copy on the disk image by selecting
    Go ▹ Go to Folder
    and entering
    /Volumes/fubar/Library
    in the text box that opens. Again, substitute the correct name for "fubar".
    Log out and log back in.
    If there isn't enough disk space available to complete this step, unmount the disk image, copy the disk image file to an external storage device, delete the original, and try again.
    Step 8
    Back up all data, then delete the disk image file.
    Step 9
    Delete the user you created in Step 3, if applicable.
    Step 10 (optional, but recommended)
    Follow the instructions in this support article under the heading "Disable the root user."

  • SOMEONE PLEASE HELP WITH MISSING FILES XP PROBLEM

    i recently purchased an ipod touch, and all i want to do is get some music on it, and update the firmware, but i cant use itunes, cuz im getting 'there are some files missing' problem.
    I swear to god, if i dont get this fixed by the end of the week, im gonna post the latest video on youtube... on how to smash up apple products.
    Ive been trying NOT to buy apple products since the first dawn of time, but i do actually like the ipod touch. But, low and behold... the very reason why i never buy apple products has been confirmed!
    can someone PLEASE tell me if there is a solid fix for this? i have literally tried EVERYTHING before you ask. im at my wits end.
    Using XP home, all updates installed... latest itunes,

    It will probably help if you'll post the exact error message and when it's occurring. Otherwise we'll just be guessing, not that someone here might not have a good guess. I'm going to guess that this thread might help:
    http://discussions.apple.com/thread.jspa?messageID=11161893&#11161893
    Regards.

  • File path problem

    I have looked an read through almost all the file path problem post possible and I am still having issues maybe one of you guys can help me, here are my files
    I am doing this as an example so that I can apply it to all of my file problems....
    Harold Timmis
    [email protected]
    Orlando,Fl
    *Kudos always welcome
    Attachments:
    pathexample.zip ‏122 KB

    First of all, to troubleshoot the problem it would help to put some filepath indicators at each point so that you can see what is going on. Also, in your exe having an error dialog "Simple Error Handler.vi" to let you know what LabVIEW didn't like in the exe.
    Now, when you run a top level ("Main.vi") and use the "Current VI's Path " in the development mode it returns <Filepath>\"Current path"\Main.vi. So stripping once will get you to  <Filepath>\"Current path" .    Now if you make it into an exe the "Current VI's Path" returns <Filepath>\"Current path"\"Name.exe"\Main.vi so you are "nested" one deeper.
    I use the following construct to determine whether the vi is being used as in the development environment or as an exe, the parse the path accordingly, although in this instance it is used to supply different directory names to a little more complex file system.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

    Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
    When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
    My pc is working with windos 8.
    Is there a solution?

    Hey there Rodney274,
    It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
    Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
    Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    Click Continue.
    See if the issue you're experiencing persists in Safe Mode.
    If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • File Info problems in Photoshop CC & CS5.1 on OS X 10.8

    I have recently upgraded my Macs, running OS X Mountain Lion, from Photoshop CS5.1 to Photoshop CC for two reasons:
    1. Because it most the most cost efficeint way to obtain the latest Camera Raw plugins that are no longer supported in CS5.1
    2. Because I began experiencing issues on two Macs where initially only in Bridge, was I no longer able to input any File Info dialogue.
    I make extensive use of File Info templates, which are then applied to batches of files in Bridge before individual files, or groups of files requiring the identical metadata are modified.
    After a time, once the overall batch of File Info templates had been applied to files I discovered that I was unable to edit them further. Even after Repairing Permissions in Disk Utility it usually took a reboot to fix the problem, although the problem was always solved.
    However there came a point a few weeks ago when I was unable write any further metadata to File Info, in Bridge or Photoshop, no matter what I did. Again this issue happened on two Macs so I'm guessing that it is not a machine issue.
    As I needed the latest Camera RAW plugins as well I decided to upgrade to Photoshop CC, which I have to say I have been very pleased with - until now. The dreaded File Info problem has now occurred again, although currently only in Photoshop, not Bridge. When I try to add or modify any information in File Info in Photoshop CC the dialogue box just closes!
    Clearly it is not just a Photoshop CC issue although I never had the problem prior to CS5.1 and I leapfrogged CS6 and I find it hard to believe that it is a machine issue. Could it be a conflict with the OS or with Extensis Suitcase Fusion 4?
    Has anyone else encountered this problem?

    Curt, Thanks for your rapid response.
    To answer your questions. I thought that, initially, the problem might be a permissions problem but it occurs on both boot drives and also when the same files are copied to Firewire external drives - on both Macs, but different external drives in each case. I followed your link but there was nothing there that I didn't already know or hadn't already tried, thanks.
    One computer is a 24" iMac and the other is a 15" MacBook Pro. I've also tried to replicate the problem on four PowerMac G5s running OS X 10.5.8 with Photoshop/Bridge CS4, with the same drives plugged in, but have experienced no problems at all. It's quite bizarre.
    Also, looking deeper into the conundrum, I find that I can't input any numbers, only letters! Using the keyboard all numbers, whether on the main or auxiliary keypads, cause the File Info dialogue box to either jump to a new tab or close. Using Shift on the numbered keys works perfectly however!
    It just goes on getting better...

  • File transfer problem

    I have a 2009 intel iMAC running 10.6.8.  Several months ago it developed a file transfer problem.  When transferring files to an external server via ethernet cable, most of the time it will only let me transfer one file at a time whether is a small word document or a large video file that is several gigabytes.   Even with transferring just one file, the elapsed time bar will not indicate the file has completely transferred.  It stays open and appears as if it is still trying to transfer even though the file size transferred is equal to the size of the file.  Plus the only way I can close the the transfer bar is to relaunch finder.  Then when I go to the folder it was transferring it to, the entire file will be there.
    Suggestions?

    Have you tried restarting the external drive and the computer?

  • 10.8 Server file sharing problem

    We have a new Mac mini with 10.8 and OS X Server app. The mini has direct attached storage and will be used mainly for File Sharing. There is a repeatable problem/bug with case sensitive folder names and file sharing. For example a folder named "Editorial" is inacessible via "Connect to Server" from a client on the LAN. The same folder with the same permissions, same everthing, except it is named "editorial" works perfectly. Change the uppercase E to a lowercase e and it works. The drive is formatted with normal HFS+. It is Not HFS+ case-sensitive. I have Xserves running 10.4, 10.5, and 10.6 for file sharing and none have this problem.
    Has anyone else experieced this? Is there a fix? Other than making everything lowercase.

    Simon Slavin United Kingdom
    If you have a problem please start a thread of your own.  Don't get us confused between solving two different problems.
    Simon,
    The subject of this thread is dealing with:
    "Server 10.8 file sharing problem"
    Specifically for direct attached storage file sharing permissions issue.
    Client computers having issues with folder permissions
    These are exactly my issues as well. I was hoping to try a solution here or maybe proffer a solution if found elsewhere.  I did not realize each problem should be opened as a separate discussion....
    Sulking back into the shadow...

  • File sharing problems with my Media Player, an A C Ryan

    I have a media player, an A C Ryan, hooked up to my wifi at home and it normally accesses all my hard disks that is plugged and shared on my iMac. I had no problems when the iMac was on Snow Leopard. Under Network/Workgroup in the AC Ryan's menu, I can see and access all the files on the hard disks.
    The moment I upgraded to Lion, all such access was lost. The AC Ryan cannot connect to the hard disks any more via the wifi network. it's as though file sharing has stopped completely. I checked the file sharing settings on the iMac and nothing has changed i.e. the disks were shared as usual. After struggling with many possible solutions and failing (I checked out a lot of forums), I reintalled Snow Leopard and the problems were immediately solved.
    Is there something seriously wrong with Lion's file-sharing? Has this been fixed in 10.7.2? My friend who has a similar setup (his media player is the WD Live) has exactly the same file sharing problem with Lion.
    I would appreciate any feedback. Thanks!

    I believe that NTFS-3G has issues with Lion.
    I use Paragon NTFS and have had no issues at all. I am pretty sure that NTFS-3G will get updated, but you need to check their site to find out when.

Maybe you are looking for

  • Need help extending wireless signal.

    Hey all. So here at home we have the BT Home Hub 4 with BT Infinity. Our house is three stories tall, and the router is on the first floor. On the first floor, the connection is fast and reliable. Up here on the third floor (where my bedroom is), the

  • How fast internet needed for AirPlay

    I am thinking of buying Apple TV for Airplay Mirroring from my MacBook Pro and iPod Touch 5th gen purposes only. Like i want to play games on my mac but have them also on the TV on a bigger screen. But my internet connection is only 25 KB/s. Once a m

  • Why itunes won't upgrade to the newest upgrade

    I am trying to upgrade the newest itunes to my mac laptop. Everytime I try and upgrade it tells me there is an error. I have checked to see if I have any software updates and it says I don't.

  • Reporting Services RSConfig.exe

    I cannot find the RSConfig.exe utility on my Reporting Services 2012 server.  Please tell me how (in detailed steps) to find/install the utility.  Thanks.

  • How to set new tab to my home pagein Firefox 18

    I would like my new tabs to open in google or my home page which has google on it, rather than the 9 little boxes. Is there a way to make my home page open in a new tab? Is there a way to have google search open in a new tab?