N73 Chinese Language (Phone Language and Writing L...

Hi, I'm new here, however I face a problem after updating the firmware of my N73 to V4.0736.3.2.1 that is it cannot read chinese language which makes SMS-ing hard. Can anyone kindly suggest me a solution?
I've tried using Hong Kong's NSU and etc. It's still the same and frankly speaking, all the updates only comes with English, Malaysia, Pilipino, Indonesia but no Chinese.
Thanks!

I wanted to buy this phone in HK, and if i had bought it there everything would be great. But they had it sold out, so i tried to buy it in Holland, then Belgium, France but the price was killing ( double the HK's price). Finally i found it in Bulgaria at a reasonable price.
Now i am in the middle of a big struggle how to make it read and write simplified chinese. Some friends told me that it is easily done if i go to a 'service' and they FLASH my phone, but as i know that after your phone has been flashed, it is usually ready to be thrown away, i dont really dare to do that, so i thought that there could be a better solution.
E-71 is my phone, and this one is a really masterpiece !
I want to tell Nokia that they finally did a phone that is working! I have been using Nokia for 10 years, and this is the first one which is really good !
All the other **bleep** i had is so slow that you can take a nap between commands.
thanks for the reply !
I will go to ask Nokia, but i know that the result is.
Val

Similar Messages

  • I just got a nano 7th generation but came in  chinese language and don't understand

    Hi
    I new at this, I just got the nano 7th generation. Took it out of the package and discover that is in chinese language and don't understand and don't know which one of the setting in the one for changing the language.
    Can anyone help one
    Annie

    Hey there amontalvo,
    It sounds like your default language needs to be changed on your iPod Nano 7th gen. These instructions should help you get that reset, from the following article:
    iPod: Changing the display language
    http://support.apple.com/kb/HT1824
    Reset your iPod—Depending on how much you've used your iPod since selecting the language, simply resetting your iPod may cause it to forget the current language setting, enabling you to select a new one. See How to reset iPod for instructions.
    Note: When you reset your iPod, all your music and data files are saved, though you may need to reset some customized settings.
    Update your iPod software—If you haven't updated your iPod software recently, use the latest version of iTunes and update the iPod software.
    Go to the main menu—Disconnect your iPod from your computer, then press the Menu button until the menu title says "iPod," regardless of the language displayed. This means you are at the main menu.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Language and writing direction

    Is there any way of finding out what direction a given language is written in? Basically I need to specify the the writing direction in a web page, according to the language selected, but I am not sure whether anything Java can tell me whether for a given locale it is RTL (right-to-left) or LTR (right-to-left)?

    import java.awt.ComponentOrientation;
    import java.util.Locale;
    public class LanguageDirection {
        public static void main(String[] args) {
         String[] languages = Locale.getISOLanguages();
         for (String language : languages) {
             Locale locale = new Locale(language);
             ComponentOrientation orient = ComponentOrientation
                  .getOrientation(locale);
             System.out.println("Orientation for "
                  + locale.getLanguage()
                  + " "
                  + locale.getDisplayLanguage()
                  + "\t is "
                  + (orient.isLeftToRight() ? "left to right"
                       : "right to left"));
    }Piet

  • Chinese language pack on English-language Nokia E7...

    I'm based in Manila and just bought a Nokia E72 cellphone here locally in the Philippines. The unit is labeled E72-1.
    I needed a cellphone which can display Chinese-language (both Traditional & Simplified Chinese) characters.
    Unfortunately, this E72 I bought here only has the English language.
    I've read that the Nokia E72 in Hong Kong / Taiwan / Singapore can display both English and Chinese language.
    Is it possible to have the Nokia E72 add a Chinese language pack to display Chinese characters? I really need the Chinese display capability since I regularly have contacts who send me important SMS messages with Chinese characters.
    If it's not possible to add the Chinese character display capability, I may be forced to let go of this Nokia E72 and perhaps have to order it instead from Hong Kong (or perhaps Taiwan or Singapore) where I presume the Nokia E72 there will have the English + Chinese display capability built-in.
    Although not as important as the Chinese-display capability, I would also like if it could have Chinese language input capability installed on this E72. Is this also possible?
    Note that I don't need the phone system menus/commands to be displayed in Chinese language (and actually prefer them to be English language). I only need the phone to display/input Chinese characters in the SMS messages.
    Please advise so that I can make a decision as soon as possible, whether to let go of this locally-bought E72 with only English language and instead procure a unit from abroad with the Chinese language display (and input) capability.

    I'd like to add some more information which may or may not be exactly useful for those who have the same issue as mine:
    Adding as much Chinese as possible on the E72 without Chinese language pack:
    http://europe.nokia.com/support/product-support/e7​2/software
    Mobile dictionary language packages Translate words into the language of your choice. Add new languages to your pre-installed Mobile dictionary application from Mobile dictionary download page >>Text-to-Speech language packages and voice packages  
    Let your phone read your messages out loud with Text-to-speech, a tool which allows you to listen to text messages, multimedia messages, and emails. To utilize your Message Reader application download language packages and voice packages at the Text-to-speech page >>
    1) Using the above page, one can download Chinese dictionary (Traditional and Simplified Chinese versions available).
    It seems that after installing both dictionaries for the Mobile Dictionary application, I can fire up the Mobile Dictionary app and choose Target language to Traditional and Simplified Chinese.  The Traditional Chinese characters don't seem to display (some characters display while others are "square boxes"; but the Simplified Chinese characters appear to display correctly.)
    So, it appears that the dictionary app can display Chinese characters (at least Simplified Chinese) after installing, although the SMS messages still display "square boxes" where there are Chinese characters.
    2) Download Chinese [Mandarin] (or Chinese [HK]) language text-to-speech.  Now even though the E72 doesn't display Chinese characters (they show up as square boxes), I can use the msg reader to read those "square boxes" messages and it will read them in Chinese.  So at least, that's one way of having Chinese read back to you although the characters themselves can't be displayed.  (Set Language Detection to "On" in the Speech settings so it automatically recognizes Chinese; or one could also set the Voice Language to Mandarin Chinese so that even the voice prompts are read in Mandarin Chinese -- however, if Language Detection is set to "Off", it will try to read English SMS messages as per Chinese pinyin -- ie. incorrectly.).
    One bug I notice is that for Chinese character email messages (Nokia Messaging). If I set my Language to English, but set the Speech setting of Language Detection to "On", and then activate the "Listen/Read" email messages, then the Msg Reader will hang up the phone. I had to use a utility called JBakTaskman to forcefully close Msg Reader (if don't have JBakTaskman, then have to turn off the phone and turn it back on).  So it looks like while the Language Detection can auto-detect Chinese characters in SMS messages and read them properly in Chinese, it seems to hang up in Email Messages.

  • Chinese Language Item Data Conversion

    Hi All,
    We get the Item data in the chinese language and we have to perform the Item data conversion.
    Please let me know what are the precautions, i have to take while migrating the data into oracle EBS system.
    Thanks,
    Rajesh

    user585632 wrote:
    Hi,
    Thanks for the below inputs.
    I have one question.
    We are planning to implement MLS in Oracle R12.1.3.If we get the Item data in Chinese Languages and start doing the conversion.
    How the data goes to _TL tables with language as Simplifies Chinese for china item data.
    Any pointer on the above point will resolve my confusion.
    Regards,
    RajeshPlease see these docs.
    Using Lightweight MLS With Oracle E-Business Suite Release 12.1.3 [ID 1077709.1
    NLS Frequently Asked Questions [ID 399789.1]
    Customizing Translation in Oracle E-Business Suite - R12 [ID 1382124.1]
    Thanks,
    Hussein

  • How to install chinese language in sap ecc 6.0 unicode system

    Hi,
        I want to install chinese language in my sap ecc 6.0 unicode system,where i would get chinese language in maraketplace.
    guide me for the same where i have to get chinese language,how to install in sap.
    Thanku

    Hello,
    There must be already some value in zcsa/installed_languages in your instance profile.
    Now in SMLT check the language information for checking the relevant value for chinese language and add this value to the parameter : zcsa/installed_languages
    Regards,
    Siddhesh

  • ASK : How to install Chinese language to my Curve 9300

    i use curve 9300, and i there is no chinese language, korean, or japanese, i readed more than ten threads which are discussing the problem, many of them said use the blackberry desktop software, but when i try, there no such option like adding language to device, i've download a lot of desktop software, but different version, but when i open it, i just the same, hope someone know how to help me ..

    Hello,
    There must be already some value in zcsa/installed_languages in your instance profile.
    Now in SMLT check the language information for checking the relevant value for chinese language and add this value to the parameter : zcsa/installed_languages
    Regards,
    Siddhesh

  • I have change my phone language to english. but the phone shows chinese language in the internet pages and with call details. how to change it. why is this occuring?

    i have change my phone language to english. but the phone shows chinese language in the internet pages and with call details. how to change it. why is this occuring?

    If the phone is not unlocked, let's say for example it is locked to another carrier such as at&t, when you put in the Tmobile SIM in, the phone would complain about the SIM.
    Does your phone do that? If yes, then the party that sold you the iPhone4S (if you purchased it from another person) may have not done the unlocking properly, and that may explain why Tmobile is insisting on the phone being locked.
    If you purchased your iPhone4S new from Apple, did you pick Tmobile, or did you choose unlocked?
    If you picked the Tmobile choice, then it should come up ready to use.
    If you picked the unlocked choice, then you would need to visit Tmobile to purchase a nano-SIM and usually they should be more than willing to help you, since you're paying for their service.
    But as you have indicated, this phone is under AppleCare, so if it doesn't work with a supposedly good Tmobile SIM, the quickest way to fix this is to get a replacement phone. When we troubleshoot we always try the least time consuming methods first.
    You may have noticed it, that a good number of unfortunate uses of the iPhone4S have had their wifi become strangely disabled after upgrade to iOS7. Your situation is the reverse, your wifi is useable but not your cellular network.
    In the mean time, you can apply for a Google Voice account (see http://www.google.com/voice), and obtain a free North American telephone number. You can then download one of many free Google Talk applications. Set it up, and you will be able to call and receive phone calls using your wifi. This would be just for the transition period before you get a useable phone.
    Google voice provides average voice quality calls to and from US & Canada numbers for free for 1 hour per call. You can use this as a temporary work around while you are waiting for your replacement phone.
    Cheers!

  • Chinese Language for N73

    Hi,
    I recently purchased a N73 from UK some months back, and right now i would like to set the language for the phone to be Mandarin, but it doesn't have that language. Does anyone know how or where i can go about doing that? Thank you
    regards,
    James

    You'll have to take the phone into a Nokia Care Point and ask them to install a Chinese language pack.
    Note that the absence of support for Chinese in a phone intended for the UK market is not a fault in the phone and that the installation of the language pack is therefore not covered by the warranty. There may be a charge for this service.
    Also note that languages installed independently of the phone's firmware do not survive firmware updates or phone resets. If you do update the phone's firmware or reset the phone after having the language pack installed, the pack will be erased and you'll have to have it re-installed.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Chinese language for a phone bought in Europe.

    I bought my phone in Bulgaria, and it is preloaded with English language and some other languages example - Bulgarian.
    I would like to use it in China, because i live and work here, so i hope that i can install Chinese language to be able to read, write and send chinese SMS and read and browse chinese language websites.
    please tell me what to do so that i can have
    English / Bulgarian / Chinese at the same time
    Val

    I wanted to buy this phone in HK, and if i had bought it there everything would be great. But they had it sold out, so i tried to buy it in Holland, then Belgium, France but the price was killing ( double the HK's price). Finally i found it in Bulgaria at a reasonable price.
    Now i am in the middle of a big struggle how to make it read and write simplified chinese. Some friends told me that it is easily done if i go to a 'service' and they FLASH my phone, but as i know that after your phone has been flashed, it is usually ready to be thrown away, i dont really dare to do that, so i thought that there could be a better solution.
    E-71 is my phone, and this one is a really masterpiece !
    I want to tell Nokia that they finally did a phone that is working! I have been using Nokia for 10 years, and this is the first one which is really good !
    All the other **bleep** i had is so slow that you can take a nap between commands.
    thanks for the reply !
    I will go to ask Nokia, but i know that the result is.
    Val

  • N91 Chinese language support and error msg: operat...

    Nokia phone: N91 WCDMA
    Firmware update: v2.20.008
    PC Suite: v7.0.82
    PC: Window XP 32-bit OS
    After updated the software, there is no Chinese for phone and written language. Is there any way that I can install the language instead of going to Nokia Care Centre? In spite of that, the Nokia phone browser prompt error message “The operation could not be completed” when I tried to access it. What is the problem?

    Hi!
    Can you give more details, especially your productcode? (You can find it by tapping *#0000# and it starts with 05**.)
    The question if you lose your Chinese language support depends on what exactly the dealer did with your phone, ie. which tools he used to flash it. So, I can't unfortunately this one without having the exact information. If he didn't fully change the productcode (and your phone is still on a supposedly Australian productcode), the update will set your phone back to the state in which it was when it left the factory. Meaning, your language pack will be back to default - without any Chinese characters.
    BR,
    yvonne

  • Window 8.1 Chinese character cannot display properly in a game even though I have downloaded and install all chinese language packs

    Hi,
    The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
    the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
    I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance. 

    Hi,
    The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
    the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
    I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance. 
    Hi,
    Please open Region, under administrative -> Language for non-Unicode programs: choose Chinese.
    Kate Li
    TechNet Community Support

  • HT4993 i did a master reset on my iphone 4. now when i try to set the phone back up from the start i put in the language and country, I hit next and it takes me to a screen that says connect to itunes, then will not me go any further, what do i do?

    i did a master reset on my sprint iphone 4 and i do not know what steps to take to get the phone to where i can connect to wifi after putting in the language and country... please help

    Connect it to your computer via the supplied sync cable and restore.

  • Need to know how to check text accuracy for CN language PDF's? I knew for EN and EU language, similarly i would like to know for Chinese language books in PDF compare process.

    Hi.
    This is for Ebook conversion purpose, Currently am doing the text accuracy for English(EN) and Latin(EU) books using Acrobat 11 Pro application with Source and Converted PDF(final output of epub/mobi).
    Similarly am trying to find the text accuracy for Chinese language books using PDF compare process, When i attempt, could see the compare report in PDF format for CN books, but i cannot catch the any text errors in it. Please advise and help me out whether i need to go for different version of acrobat or do i need to add any plug-ins with respect to language or chinese fonts here.

    Could any one please advise me on my question, so that it will be helpful to purchase the correct application before i go forward.

  • TS1424 My iTunes and App store are opening in chinese language but I want to convert it into English... How to do that???

    My iTunes and App store are opening in chinese language but I want to convert it into English... How to do that???

    As far as I know the language of the two stores on the iPad (iTunes and the App Store) can't be changed - they should be in the language of the country where your account is based (if they aren't correct then try logging out of your account by tapping on your id in Settings > Store and then log back in).

Maybe you are looking for