N73 got shuts down automatically after some time

hi,
my n73 music edition gets shut down after some time autmatically please can anybody tell me the reason.

The reason is that nokia phones have many bugs and problems.
A common cause of this problem is 3G. If the phone is in a weak 3G area the loss of 3G signal can cause the phone to reboot. It's an old problem thats been affecting nokia's for years. Disabling 3G can stop the random shutdowns.
It may also be worth updating the phones firmware but this is a fairly risky procedure that can cause more problems than it solves.

Similar Messages

MacBook shuts down abruptly after some time, then has problems starting

I have 13" MacBook that I'm having some problems with. I have OS X and Windows XP in a dual boot configuration, and the problem happens in either OS. I can only use the computer for anything from 3 to 30 minutes before it suddenly shuts down.
When this first happens, I get trouble restarting it. It often just comes as far as intialising the DVD-ROM (you hear the sound), then it shuts off again. It can take up to ten starts before it powers up again. And then it's just a matter of time before the whole thing starts again. This happens regardless if I have the charger connected or not, or if I use just the charger and remove the battery.
At first it was thought that the battery was faulty, and I received a new one last spring. However, the problem quickly returned, and I haven't bother to do anything more about it before now. Suffice to say, I miss using my shiny MacBook, and I hope that someone can point me out in the right direction. As the computer is 2 years this may, I doubt I can get it repaired for free on the warranty(?).
Long post, but I hope I've explained the problem thourough enough. I believe I did the SMC reset and software update last summer, though I'm not sure which revision I'm on. If there's any more information I can provide, please let me know. It just takes some time to get the computer to stay on long enough to check stuff

Thank you so much for answering! I've actually read your answer to other similar forum, and have just installed iStatPro. it says that my fan is "exhaust" and at 0rpm. do i HAVE to replace the fan to a new one? can I just open up my mac and clean out the fan? if so, would you recommend this instead of buying a new fan? one last thing, if I buy a new fan, is it easy for me to replace it by myself? again, thank you so much for your answer.

Satellite M100 shuts down automatically after about 10min

Hey there guys :)
My Toshiba Laptop has been powering off abrubptly and on it's own lately.
When I turn my Laptop on, everything appears fine, battery if fully charged, AC adapter plugged in etc. However, after about 10 minutes of use it will just turn off and make a little 'zoip' noise or similar. Turning the laptop back on right after works, but I find that it will only stay on for about 4 minutes before doing the same. Turning it back on again reduces the time it stays on, sometimes not even going past the boot sequence.
However, if I leave it alone for a couple of hours and come back to it, it will stay on for about 10 minutes again, before going thru the same process.
I have a waranty, but I'm hesitant in taking my laptop in because I don't want to lose my files.
So I am hoping someone here has a fix for my problem :)
Thank you,
Osman

Hi
Sorry to said it but in my opinion its a hardware problem. This strange notebook behavior seems to be a simply overheating!
The notebook supports an overheating protection to prevent the hardware from the damage.
If the temperature increases to the higher level the notebook shuts down automatically. This is a fact and nothing unusual in such case.
Mostly the fan cleaning helps but sometimes the notebook must be opened for professional cleaning. But note: I dont recommend opening or removing any cases! You would lose the warranty!!!
Maybe a simple vacuuming would make the job.
Anyway, you said you will not lose the data on your HDD. Well, I wonder why you dont create an data backup You can also remove the HDD and connect it via external USB controller to the second PC and could save the files on the other HDD.
After this procedure you should put the HDD again into the notebook and try to reinstall the OS.
If it does not help I would recommend taking the warranty.

Lumia 1020 shutting down automatically after updat...

i have updated my lumia 1020 to latest 8.1 OS and it has a problem it shuts down automaticcally after about 6 hours then i check my phones IMS is nott registered....any suggestion please reply me
Moderator's note: The subject was amended as the post was moved to the most appropriate board.

@arsal875 Hi. Welcome to the Nokia Support Discussions.
Nokia cannot support software that it does not have available on its devices. We suggest reaching out to: Windows Phone Preview for Developer Support for further assistance. Thanks for your understanding.

My PC shuts down automatically after installing firefox.

Sometimes the PC does not open at all. At times it shuts down by itself.
== After installing firefox ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.2)

Go to the control panel and adjust the power settings. Start/Settings/Control Panel/Power settings. You can adjust the settings there.

My gen 6 nano shuts down automatically after 10 minutes. how do i stop this?

my gen 6 nano shuts down by itself after about 10 minutes playing. what is going on?

Are you using Clear Recent History?
*https://support.mozilla.com/kb/Clear+Recent+History
If you do then it is possible that Firefox wasn't able to do that and does it on the next start instead.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

My macbook shuts down automatically after 30 seconds of inactivity

after immediately start up, maybe less than 30 seconds, the menu comes up asking if i want to restart/shutdown/sleep/cancel and if i don't cancel immediately the computer shuts down.
if i cancel, the menu shows up after about 30 seconds.
i have checked the energy saver prefs and everythign is set at 15 min.

Update: I found the problem in similar posts. Once I inserted the headphones completely in (no metal showing), the problem was resolved.

Equium A60 shuts down automatically after 10min

My laptop TOSHIBA Equium A60, after 10 min of work it logs off because it seems to become very hot although the fan is working?
How can I fix this problem

Hi I had the exact same problem
It was definitely overheating, unfortunately whoever designed the heat sink radiator didn't think about dust build-up!
I've owned mine for about a year and a half and recently (last 5-6 months) I noticed the fan running at full speed all the time, then during summer it overheated often, now that the weather is cooler I cant blame the sun!
So I went down the road brought a jewelers screwdriver set for next to nothing and started dis-assembling the laptop.
I first found some instructions off the net (print them out!), the trickiest part is to remember to get the three screws under the CD drive!.
Once I had it apart and removed the heat sink and fan it was immediately apparent what the problem was, the heat sink resembled a shag pile carpet!!!
I went down the road again and got a can of compressed air, blew the dust away, put it back together and hey presto, its hardly even warm!
Any fool can fix this problem, don't waste your money giving it to a technician who will charge you 70 per hour to fix it for you.

How to close the cursor automatically after some time?

Hi,
In my application we are opening the REF cursors many times,
but if thre are any problems then the cursor is not closing , it
remains in the pool. Is there any parameter settig to set a
perticular period of time. Because all the cursors are mostly
for data retriving (read only) only.
Or is there any alternative way for this?
I hope serializable refcursors will help, is there any link to
know more about these serializable curosrs?.
regards,
khaleel

Try this.
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
MainVI.vi ‏18 KB
SubVI.vi ‏25 KB

WebLogic Server shutting down Automatically

The WebLogic Server is shutting down automatically after few hrs(7-8) with the following message:
<*Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>*
*<Dec 1, 2008 11:45:08 AM EST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>*
*<Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SUSPENDING>*
*<Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>*
*<Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>*
*<Dec 1, 2008 11:45:08 AM EST> <Notice> <Server> <BEA-002607> <Channel "Default[1]" listening on 127.0.0.1:9401 was shutdown.>*
*<Dec 1, 2008 11:45:08 AM EST> <Notice> <Server> <BEA-002607> <Channel "Default" listening on 10.167.19.113:9401 was shutdown.>*
*(preStop) Beginning PegaRULES shutdown...*
What might be wrong..Please help
We are using WebLogic9.2

There is nothing significant in the log ..no exceptions/warnings.We are starting the weblogic on UNIX remote machine and logging is done to nohup.out.Below is the startWebLogic.sh
Also,The server is not shutting when I logout from telnet session after executing the start script.
*#!/bin/sh*
*# WARNING: This file is created by the Configuration Wizard.*
*# Any changes to this script may be lost when adding extensions to this configuration.*
*# --- Start Functions ---*
stopAll()
*     # We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services*
*     if [ "X${ALREADY_STOPPED}" != "X" ] ; then*
*          exit*
*     fi*
*     # STOP POINTBASE (only if we started it)*
*     if [ "${POINTBASE_FLAG}" = "true" ] ; then*
*          echo "Stopping PointBase server..."*
*          ${WL_HOME}/common/bin/stopPointBase.sh -port=${POINTBASE_PORT} -name=${POINTBASE_DBNAME} >"${DOMAIN_HOME}/pointbaseShutdown.log" 2>&1*
*          echo "PointBase server stopped."*
*     fi*
*     ALREADY_STOPPED="true"*
*     # Restore IP configuration the node manager starts IP Migration*
*     if [ "${SERVER_IP}" != "" ] ; then*
*          ${WL_HOME}/common/bin/wlsifconfig.sh -removeif "${IFNAME}" "${SERVER_IP}"*
*     fi*
*# --- End Functions ---*
*# This script is used to start WebLogic Server for this domain.*
*# To create your own start script for your domain, you can initialize the*
*# environment by calling @USERDOMAINHOME/setDomainEnv.*
*# setDomainEnv initializes or calls commEnv to initialize the following variables:*
*# BEA_HOME - The BEA home directory of your WebLogic installation.*
*# JAVA_HOME - Location of the version of Java used to start WebLogic*
*# Server.*
*# JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)*
*# PATH - JDK and WebLogic directories are added to system path.*
*# WEBLOGIC_CLASSPATH*
*# - Classpath needed to start WebLogic Server.*
*# PATCH_CLASSPATH - Classpath used for patches*
*# PATCH_LIBPATH - Library path used for patches*
*# PATCH_PATH - Path used for patches*
*# WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch*
*# JAVA_VM - The java arg specifying the VM to run. (i.e.*
*# - server, -hotspot, etc.)*
*# USER_MEM_ARGS - The variable to override the standard memory arguments*
*# passed to java.*
*# PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.*
*# POINTBASE_HOME - Point Base home directory.*
*# POINTBASE_CLASSPATH*
*# - Classpath needed to start PointBase.*
*# Other variables used in this script include:*
*# SERVER_NAME - Name of the weblogic server.*
*# JAVA_OPTIONS - Java command-line options for running the server. (These*
*# will be tagged on to the end of the JAVA_VM and*
*# MEM_ARGS)*
*# For additional information, refer to the WebLogic Server Administration*
*# Console Online Help(http://e-docs.bea.com/wls/docs92/ConsoleHelp/startstop.html).*
*# Call setDomainEnv here.*
*DOMAIN_HOME="/apps/bea/user_projects/domains/SAM1"*
*. ${DOMAIN_HOME}/bin/setDomainEnv.sh $**
*SAVE_JAVA_OPTIONS="${JAVA_OPTIONS}"*
*SAVE_CLASSPATH="${CLASSPATH}"*
*# Start PointBase*
*PB_DEBUG_LEVEL="0"*
*if [ "${POINTBASE_FLAG}" = "true" ] ; then*
*     ${WL_HOME}/common/bin/startPointBase.sh -port=${POINTBASE_PORT} -debug=${PB_DEBUG_LEVEL} -console=false -background=true -ini=${DOMAIN_HOME}/pointbase.ini >"${DOMAIN_HOME}/pointbase.log" 2>&1*
fi
*JAVA_OPTIONS="${SAVE_JAVA_OPTIONS}"*
*SAVE_JAVA_OPTIONS=""*
*CLASSPATH="${SAVE_CLASSPATH}"*
*SAVE_CLASSPATH=""*
*trap 'stopAll' 1 2 3 15*
*if [ "${PRODUCTION_MODE}" = "true" ] ; then*
*     WLS_DISPLAY_MODE="Production"*
else
*     WLS_DISPLAY_MODE="Development"*
fi
*if [ "${WLS_USER}" != "" ] ; then*
*     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.username=${WLS_USER}"*
*fi*
*if [ "${WLS_PW}" != "" ] ; then*
*     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.password=${WLS_PW}"*
fi
*CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${MEDREC_WEBLOGIC_CLASSPATH}"*
*echo "."*
*echo "."*
*echo "JAVA Memory arguments: ${MEM_ARGS}"*
*echo "."*
*echo "WLS Start Mode=${WLS_DISPLAY_MODE}"*
*echo "."*
*echo "CLASSPATH=${CLASSPATH}"*
*echo "."*
*echo "PATH=${PATH}"*
*echo "."*
*echo "***************************************************"*
*echo "* To start WebLogic Server, use a username and *"*
*echo "* password assigned to an admin-level user. For *"*
*echo "* server administration, use the WebLogic Server *"*
*echo "* console at http://hostname:port/console *"*
*echo "***************************************************"*
*# Set up IP Migration related variables.*
*# Set interface name.*
*if [ "${Interface}" != "" ] ; then*
*     IFNAME="${Interface}"*
else
*     IFNAME=""*
fi
*# Set IP Mask.*
*if [ "${NetMask}" != "" ] ; then*
*     IPMASK="${NetMask}"*
*else*
*     IPMASK=""*
*fi*
*# Perform IP Migration if SERVER_IP is set by node manager.*
*if [ "${SERVER_IP}" != "" ] ; then*
*     ${WL_HOME}/common/bin/wlsifconfig.sh -addif "${IFNAME}" "${SERVER_IP}" "${IPMASK}"*
fi
*# START WEBLOGIC*
echo "starting weblogic with Java version:"
*${JAVA_HOME}/bin/java ${JAVA_VM} -version*
*if [ "${WLS_REDIRECT_LOG}" = "" ] ; then*
*     echo "Starting WLS with line:"*
*     echo "${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS}"*
*     nohup ${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS} &*
*else*
*     echo "Redirecting output from WLS window to ${WLS_REDIRECT_LOG}"*
*     nohup ${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS} >"${WLS_REDIRECT_LOG}" 2>&1 &*
*fi*
*#stopAll*
*#popd*
*# Exit this script only if we have been told to exit.*
*if [ "${doExitFlag}" = "true" ] ; then*
*     exit*
fi

Kt4V shuts down automatically

I have a KT4V MB WIth amd 2600+ with 512MB pc 2700 ATi 9500pro
I have updated everything from bios to vga driver.
I have replaced my power supply.
But still my computer shut off automatically after different time interfalls.
my cpy temp is 50 degreees max
Please HELP

I have updated everything from bios to vga driver.
means 1.9 bios and 3.38 catalyst ?
I have replaced my power supply.
What model/ spec is your new PSU ?

My iPad acting so weird tonight. When it shut down automatically because the battery has been drained. When I opened it, it creates some weird sounds like *swoosh* blahblah. It does make me feel nervous. Can someone help me? Does it already broken? :(

My iPad acting so weird tonight. When it shut down automatically because the battery has been drained. When I opened it, it creates some weird sounds like *swoosh* blahblah. It does make me feel nervous. Can someone help me? Does it already broken?

adetoye50 wrote:
Dear Contacts Journal Support Team,
FYI, this is a user to user support forum. You are NOT addressing Apple here.
Honestly, I doubt anyone is really going to take the time to read the novel you have written.

I just got the iphone 6 and it has shut down on me 6 times this morning on its' own. I get a red screen, then the phone shuts down. HELP

I just got the iphone 6 and it has shut down on me 6 times this morning on its' own. I get a red screen, then the phone shuts down. HELP. It started to happen out of nowhere. The screen goes red, and it shuts down. I manually restart it - and it shuts down again.

absolutely the same issue with apple logo / red screen and looping on iPhone 6 16gb purchased 3 days ago in Moscow. first i was so happy to have it and now its a brick. also noted the brightness drop outs 1 day before it started. after chatting with apple support:
- we've tried to go for recovery with iTunes. didn't work
- advised on go for warranty replacement by Apple Support chat
- found local Apple Service Provider. gonna go tmrw.

I got macbook pro 13" i bought in 2011 but its now getting slow when i start up or when shutting down .and apps takes time to open like just bouncing????????

i got macbook pro 13" i bought in 2011 but its now getting slow when i start up or when shutting down .and apps takes time to open like just bouncing????????

See the Mac OS X Speed FAQ.

Hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing of the iOS causes the phone to shuts down automatically and turn on again? thanks.. =)

hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing or upgrading the OS causes the phone to shuts down automatically and turn on again? thanks.. =)

How long are you leaving it on the charger?
Are you connecting it directly to an electrical outlet or trying to charge via USB? USB may not provide enough power to adequately charge the device if the battery is that low.
If none of that helps, then the only option would be a warranty replacement as either the battery or system board is bad.

N73 got shuts down automatically after some time

Similar Messages

Maybe you are looking for