N73 will not work after firmware upgrade

Hi
Im looking for some advice.
Today because i was having problems with a software application on my N73 Nokia's website advised me to update the firmware which seemed to go ok.
When i unplugged the cable the phone went off and wont switch one now, nothing happens at all when you press the on off switch.
Anyone got any ideas whats happened and whether its fixable??
Thanks in advance

Hi
I tried the N93 system fix below and the software updater recognised the phone first time and completed the upgrade, the phone then powered up of its own accord.
However i get the white screen with the blue "nokia" on it but then if flicks a couple of times and leaves me with a message "Phone start up failed contact the retailer"
Anyone got any ideas what that means / how to fix it??
Thanks in advance
01-Jul-200708:13 AM
scoobyman wrote:
Hi jase002
I don't know whether you left battery out for at least 5 minutes at the time, which seems to be necessary.
You might like to look at post from nando61 just input "N93 update fix" into "Search Discussions" at top right of screen. Although different S60 phone to yours, it seems to be a question of whether NSU can be "tricked" into reading phone so that software can be re-loaded.
It appears to have worked on an N70, N73 and N93 so far apart from loss of data unfortunately!
It may however be a small price to pay if you have a "bricked" "N" Series and a visit to a Nokia Service Centre neither practical or feasible.

Similar Messages

HT1338 motion 4 will not work after yosemite upgrade

motion 4 will not work after yosemite upgrade

To be honest I do not use motion or any other compositing app so i do not miss it personally. However the new Motion is not that expensive, around $60 i think. Still, I understand your frustration.
I am afraid the more the OS is updated the less compatible certain applications will become.
Good Luck
h

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

DSL will not work after speed upgrade

I ordered a speed upgrade (from 3 to 5 down) a couple weeks ago. On Tuesday they confirmed that they completed the order but now the DSL will not work at all. I have an old Westell B90 Infospeed DSL modem (branded as Bell Atlantic) and they swear that the modem is not the problem. I have been on the phone with tech support every day for a week now and still no service. I do not believe they are actually doing anything to remedy the situation. Twice now I was promised a tech would come to my house. I have taken time off from work to stay home and nobody ever comes. One day they say it can be resolved at the central office then that evening they say a tech needs to come. I wait for tech and nobody shows so I call them back. They then tell me again that the problem is at the central office and no need for a tech. They have run me down this path 3 times now. Does anyone have any suggestions on how I can actually get a tech to show up?? I think the call center people are full of lies and just passing me around to avoid the problem. I am in Montgomery County Maryland.

Post your modem status from the modem.
As how to get this.
#1 Use the tool that is addressed at
http://www.dslreports.com/faq/7553
All FAQs » Verizon Online DSL FAQ » 5. Connection » What is the Westell Modem Browser and how can I interpret it's results?
#2 Once installed, don't forget to use ** CTRL-ALT-F7 ** to reveal several "hidden" tabs, the signal levels and error counters, so forth.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

SB wow wireless not working after firmware upgrade

Hello,
In the beginning of this year I bougth a pair of Sound Blaster World of warcraft wireless headset. And there have been alot of trouble with them, I've been using the latest software but not the latest firmware ever since then.
And every now and then my mic stop to work, I could hear sound but the mic was totally dead, and all of a sudden, of no logical reason the mic started to work agian.
So I thought a firmware upgrade could make them work better, but no, i upgrade firmware from .9.x to .0.x.
And guess what happens? Nothing works no, not the sound, not the mic, the USB trasmitter cant even sync with the headset anymore.
Ive tried a million things now, some of them are:
. Just tried to reinstall it, didnt work
2. Tried to install it in winxpsp3 compability mode, didnt work.
3. Tried to clear all temp-folder (the temp-folder under c:\windows\temp and the user-temp) after Ive uninstalled it, didnt work.
Im running on Windows 7 Professional x64 edition.
What could cause this? I havnt tried to install them on a XP-computer yet tho. But I have to get them work in Win7, since i cant downgrade just because of a headset, huh?
Thanks,
Johan

Ok, please redirect me to a tecnical supportpage where I can find potential solutions,
- and instructions how I do for example a downgrade of firmware?
PS, This page does not include any potential solution:
http://support.creative.com/Products...tDetails.aspx?
catID=437&CatName=Headphones+%26+Headsets&subCatID =23&subCatName=MIDI+Keyboards&prodID=9068&prodName =Sound+Blaster+World+of+Warcraft+Wireless+Headset& bTopTwenty=&VARSET=prodfaqRODFAQ_9068,VARSET=CategoryID:437

HP M451dn AirPrint Not Working After Firmware Upgrade

Hello All,
Just setup and brand new HP Laserjet 400 color M451dn.
Since this does not have the WiFi option, I connected it via Ethernet cable directly to my NetGear WNDR4300 (N750) WiFi Router, so folks in my office with iPads/iPhones can AirPrint to it.
This worked great, out of the box! iPad/iPhone users could join the WiFi network, and then see the printer with no problem.
However, after updating the printer to the latest firmware (20140708) the iPads/iPhones can no longer find the printer!
The Config Report still shows AirPrint as one of the "Installed Personalities and Options", however, the web-based printer interface does not show Bonjour as one of the Networking options in the Networking menu. (It shows IPv4 and IPv6 only)
I have tried the following sequence without success:
1. Power-off the M451dn printer.
2. Power-off the Netgear WNDR4300 (N750) router, wait 30-sec, and power-on.
3. Wait 2-3 minutes for Netgear to sync-up after power-up.
4. Turn-on M451dn.
5. Try finding M451dn with iPad.
Still getting "No printers found..."
So, did I do something wrong in upgrading the firmware?
Or do I have to somehow re-enable the AirPrint option?
Please help, as I am now most hated amongst the Apple crowd at the office.
Bob

Hi @ElBobo
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP LaserJet Pro 400 color Printer M451nw is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet Pro 400 color Printer M451nw support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

EPrint on CP1525nw not working after firmware upgrade

I have a CP1525nw that ePrint was working great on when I bought the device. Then I upgraded to the latest firmware (20110329), and now I get a "System Error" in ePrint Center every time I send a print job. I also get a warning message that says "To ensure your ePrint service is not interrupted please update your firmware at www.hp.com/go/eprint." I have tried that link, and I have verified that I do in fact have the latest firmware installed, but it simply doesn't work anymore. The status in ePrint Center is showing that the device is connected and ready. Any ideas on how to resolve this issue?
Thanks!
I work for HP.

Ok, please redirect me to a tecnical supportpage where I can find potential solutions,
- and instructions how I do for example a downgrade of firmware?
PS, This page does not include any potential solution:
http://support.creative.com/Products...tDetails.aspx?
catID=437&CatName=Headphones+%26+Headsets&subCatID =23&subCatName=MIDI+Keyboards&prodID=9068&prodName =Sound+Blaster+World+of+Warcraft+Wireless+Headset& bTopTwenty=&VARSET=prodfaqRODFAQ_9068,VARSET=CategoryID:437

Canon scanner (Canoscan 8600F series) will not work after OS upgrade.

I used the scanner when when it was 10.6 just fine and 10.7 but as soon as I upgraded it to 10.8, it wouldn't. Officially the website supports up to 10.6. I don't know how it worked on 10.7. Now, it doesn't even recognize the scanner.
One thing was I did wipe out the drive and re-install the OS because OS upgrades would perform better. Trying to re-installing the older drivers don't help.

First, Canon (and a few other printer and scanner) drivers are distributed via Apple's software updates.
Then, 10.8.2 requires many if not most apps and drivers to be updated. If you just upgraded to 10.8.2, the newest drivers should be included, otherwise they should show up once you run Software Update.
Alternatively, you can check http://support.apple.com/downloads/ for the latest and greatest.
However, it appears that your scanner is not (yet?) supported in 10.8.2. Check here and follow the link there: http://support.apple.com/kb/HT3669#canon - your scanner is not listed.
Note that it's Canon's job to provide the drivers, Apple only helps distributing them. So, you may want to contact Canon and ask them, then sit and wait... sorry...

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

OMiC will not work after installing Leopard

Does anyone know why OMiC will not work after upgrading to Leopard?
After downloading Leopard, went into mail and tried to open a windat file, but a message came up stating OMiC disabled. I deleted that version, and tried to download OMiC 1.7.7 but it won't even get thru the download menu, it stops at "installation" gives me a choice of Tiger, or Panther, and it will not let me go any further. Has this happened to anyone else???

I am not sure any of the solutions for these files have been made Leopard compatible -- I saw another post about this not long ago. See:
http://discussions.apple.com/thread.jspa?messageID=5736631&#5736631
Ernie

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Hey there sarunelis,
It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/ts3230
Thank you for using Apple Support Communities.
Regards,
Sterling

My TV video/audio cable will not work since the upgrade. Only get audio on TV.

My TV video/audio accessoriy cable will not work after the iOS5 upgrade. Only the audio goes through to the TV. Any solutions?

no answer

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

N73 will not work after firmware upgrade

Similar Messages

Maybe you are looking for