N73 with Navicore needs firmware version 2.0628.0....

Hi folks, I have N73 with v0.0.1 firmware but have been told by Navicore that I need 0.0.3 to run their Personal Europe 2006/1 software. Problem is if you go the Nokia site there is no Firmware upgrade for the N73 handset. Anyone got any idea how to get N73 firmware version 2.0628.0.0.3 or later. Thanks in hope

Well, I took my N73 to the Nokia repair centre and the chap checked my actual phone details against Nokia's internal website and guess what - the model of N73 I have only supports the version of firmware that is currently on it (version 2.0628.0.0.1).
He also explianed there are many different versions of the N73 handset and many different levels of firmware for each version. He kindly re-loaded 2.0628.0.0.1 just to make sure that there were no corruptions. The bluetooth still drops out so:
I have now sent the navicore software back to Mobilefun (who have been excellent) and am contemplating what to do with the Nokia N73 - frisby comes to mind.
I wish Nokia would get there act together BEFORE selling phones rather than using us (mushrooms - kept in the dark and fed) to Beta test their code after - and still no comments back from Nokia on this forum.
EDIT: removed expletiveMessage Edited by jams on 26-Sep-2006
02:24 PM

Similar Messages

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

Airport Ver 7.4.1 will not update firmware. Goes throught the process, reboots with the same firmware version. Power cycled the airport, did not help

Airport Ver 7.4.1 will not update firmware. Goes throught the process, reboots with the same firmware version. Power cycled the airport, did not help.

Please see the answer to your other post.

HT1926 Have new generation 6 nano. Was able to install version 8 of itunes but error reads that this version with Vista needs newer version. Have tried to install 10.1 but it installs only part way then installs itself part way through. Help.

Has anyone had problems downloading itunes 10.1 with the generation 6 nano? I have
Windows Vista on my computer. Was able to install version 8.1 but nano needs newest version. Help anyone???

The solution Lijoesat posted above worked for me!
First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
I tried to empty the trash bin after but many files was locked and Garageband would still not install.
I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
The inserted picture show some of the folder structure, I deleted everything after private/var/folders/

How to change firmware version for N73

Hi
I wanted to force an upgrade for my firmware.
Can u let me know how to do it?
it says " No software updates available for your phone
n73 Rm132 4.0728.3.1.1 .How can i change this version to lower one so that it updates?

hi
me also having a problem with my mobile firmware version, i have a latest version V 4.0812.4.0.1. when ever i try to install a software to my mobile the EXPIRED CERTIFICATE error is shown. i change my mobile date to back years but the problem remains.
i want to go back version, is it possible otherwise what to do, Plz let me know.
Thanks

Problem with Offline Files with Cisco NSS322 (firmware 1.3)

Hi
We've recently bought a new NSS322 NAS box to replace an ageing Windows SBS 2003 file server. We've upgraded the firmware to 1.3, and begun moving files across from the Windows server to the new NAS box. However, we're having a problem with Offline Files on the NAS, as attempting to make directories available offline on Windows clients (only tried Vista Business 32-bit so far) we get loads of errors stating that these files cannot be made available offline "because they are in use" (or something like that).
Any suggestions as to why this might be? It doesn't appear to affect all files, but most of them.
I've read somewhere that the "allow oplocks" setting can affect this if disabled, but it is already enabled on the device, so this can't be the cause of the problem.
Any help you could provide would be much appreciated, as at the moment this issue is rendering our NAS unusable as we rely heavily on the offline files functionality.
Thanks in advance.
I have some more information - this appears to be related to the ownership permissions of the files on the NAS. New files created on the NAS can be made available offline, and have the ownership of the person who created the file, however, the files we moved across from the server are all listed as being owned by the user "guest" (I think this may be related to the fact that when we moved the files over, the user was logged in as "admin" rather than a user on the AD Domain). I should be able to resolve this through changing the owner of the files on the NAS, but I can't seem to do this, as I get an "access denied" error each time I try to change ownership.
Message was edited by: redcitrus
Is there any chance someone's going to be able to help me with this? I've currently spent £500 on a box that I can't use. If it can't handle Offline Files satisfactorily, it's no use to us.
I've been looking at this a bit more - if appears that each user can make files they have created available offline, but files created by other people cannot - the error message that appears is: "The process cannot access the file because it is being used by another process".
I'm getting desperate here...can anyone help?
Message was edited by: redcitrus

Sorry, but I don1 speak very good english..
I was Try this quick test: As a quick test, you can do a forward all and make sure you can get into the ftp server.
but result it is to same.
I think, that problem is in firmware, becasue I know more people who own this router with to same firmware version (2.0.1.3), and have they to same problem how I.
I have DISABLED FIREWALL on my router and problem hold over.
If I replace router Cisco Linksys WRVS4400N by Ovislink router or any other, issue (problem) already no is.
Configuration in Cisco Linksys WRVS4400N and configurations in any other router is to same, but FTP connection via Cisco Lynksys always will crash.
If I connect to any other FTP server, sometimes requieres from me ftp login and password. It is OK, but if I assign login and password, after connect me to this FTP server, i see folders and files on this server, but without reason connecting fall down.
Few seconds later if I connect to the to same FTP server, sometime either not request login and password and connection fall down.

NEW F5, F55 Firmware Version v4.11 and AXS-R5 v4.1

All,
We are releasing firmware version 4.11 for the F5, F55 and version 4.1 for the AXS-R5 RAW recorder
(Version 5 firmware is expected before the end of the year)
Please note:
If you proceed to update firmware, you must update both the camera and AXS-R5 RAW recorder, you must not update one without updating the other
The cameras must be minimum v2.0 firmware before updating to this release v4.11 firmware version
Do not upgrade AXS-R5 to this release v4.1 firmware unless you are at minimum v1.20 firmware on the recorder.
Interval Recording:
There is no change regarding the Interval Recording feature in V4.11. Thus Interval Recording is not included in this release.
Usage of AXS-A256S24 memory card:
You MUST update the AXS-R5 recorder to V4.1 if you want to use the new 256GB card.
See release notes below
PMW-F55/F5 Firmware Version V4.11 Release note
August 8th, 2014
This document explains about firmware update of PMW-F55/F5 V4.1 to V4.11. The latest firmware version of related products is below.
Product name
Latest firmware
Release date
PMW-F55/F5
V4.11
This announcement
AXS-R5
V4.1
Aug 8th, 2014
AXS-512S24
V1.2
June 5th, 2013
AXS Utility Software
V1.3
Feb 28th 2014
RAW Viewer
V2.2
Feb, 28th, 2014
This firmware can be updated from V4.1, V4.0, V3.0, V2.0, V2.10 and V2.11. When you want to update F55 and F5 from V1.22 and earlier, you must update to V2.0 first. Regarding the procedure and functions about V2.0, please refer to “PMW-F55/F5 Firmware Version V2.0 Release note” which was released on Oct 4th, 2013.
F55/F5 must not be downgraded to previous versions after updating to V2.11.
NOTE: The new Firmware V4.11 for PMW-F5/55 is only compatible with AXS-R5 running with Firmware V4.1. If your AXS-R5 has installed an older Version please update to current Firmware V4.1 the same time.
<<Modification from V4.1 to V4.11>>
<Functional Improvement>
1. Corrected Payload ID on 4K SDI output
We corrected an error of the Payload ID on the 4K SDI output stream.
2. Fixed malfunction of Auto Iris function while using CA-4000
While using CA-4000 (4K Live System) and Auto Iris function, the Iris sometimes moved unintentionally after turning “Auto Iris” off. We fixed it.
<Notification we would like to share>
1. Interval recording function
You can see “Interval Rec” on recording menu page, but V4.11 firmware doesn’t support Interval Recording function
2. Assignable button of Marker
When you assign Marker On/Off as an Assignable button, Marker on VF and SDI Out setting is changing below.
Marker on VF
Marker on SDI
Message
Push 1
ON
OFF
Marker ON
Push 2
OFF
ON
Marker ON
Push 3
OFF
OFF
Marker OFF
Push 4
ON
ON
Marker ON
3. iOS setting for Wi-Fi Remote
While using Wi-Fi Remote by iOS devices and Safari, please turn off Private browse function.
4. All file Support
All files which are created with Firmware V4.11 are not compatible with an earlier firmware version.
<< Version up procedure >>
Please refer to “Version Up Guide for PMW-F55 and F5”.
AXS-R5 Firmware Version V4.1 release note
August 8th, 2014
This document explains about firmware update of AXS-R5 V4.0 to V4.1. The latest firmware version of related products is below. PMW-F55/F5 must be updated to V4.1.1 or V4.1.0 at the same time. For details about PMW-F55/F5 V4.1.1, please refer to “PMW-F55/F5 Firmware Version V4.1.1 release note”.
Product name
Latest firmware
Release date
PMW-F55/F5
V4.11
August 8th, 2014
AXS-R5
V4.1
This announcement
AXS-512S24
V1.2
June 5th, 2013
AXS Utility Software
V1.3
Feb 28th 2014
RAW Viewer
V2.2
Feb, 28th, 2014
Attention: You must update R5 to V4.1 from V4.0, V3.0, V2.0, V1.21 and V1.20. If your R5 is not yet updated, please update to V1.20 first and go to this updating procedure.
<<Modification from V4.0 to V4.1>>
<Functional Improvement>
1. Support of new AXS-A256S24 memory card
The new firmware will enable the support of the new 256GB AXS-A256S24 memory card.
Attention: The new smaller AXS-A memory cards are only compatible with the AXS-R5 (RAW recorder) and the AXS-CR1 (Card reader) by using the new appropriate card adapter. (Included in the box in USA)
2. Enhancement of Metadata
The new S-Log3/S-Gamut3.Cine & S-Log3/S-Gamut3 settings will be written into the Metadata XML files.
<< Version up procedure >>
Please refer to “AXS-R5 Version Up Procedure”
For AXS-R5_4.10_1621-AXS.f.bin
Download all files here:
https://www.dropbox.com/sh/ylhb6imitvu9n0u/AADe6zvWmZEnPVtmBDtbQtlTa
Regards
Peter

Xplorer wrote:
Will Sony ever release a firmware update with interval recording?? This is getting ridiculous. Fortunately it is still possible to do some pretty decent 4K time-lapse recordings with the camera as it is right now. http://vimeo.com/103176638

NEW Firmware Version 6.01

All,
We are releasing version 6.01 firmware for the F5, and F55 motion picture cameras. Thank you for your feedback in discovering the S/Q, Center Scan issue.
When S&Q setting was set “On” in 2K Center Scan mode or 2K Full Scan mode and the power was turned Off and On, Recording did not work. This update fixes it.
This update includes all other features and functionality as posted in the previous version 6.0 announcement
http://www.community.sony.com/t5/F5-F55/NEW-Version-6-Firmware-F5-and-F55/m-p/506807#M28137
PMW-F55/F5 Firmware Version V6.01 Release note
June 30th, 2015
This document explains about firmware update of PMW-F55 V6.01 from PMW-F55/F5 V6.00. The latest firmware version of related products is below.
Product name
Latest firmware
Release date
PMW-F55
V6.01
This announcement
PMW-F5
V6.01
This announcement
AXS-R5
V4.1
Aug 8th, 2014
AXS-512S24
V1.2
June 5th, 2013
AXS-A512S24/A1TS24
V1.0
Mar 17th, 2014
AXS-A256S24
V2.0
Mar 26th, 2015
AXS Utility Software
V1.3
Feb 28th, 2014
RAW Viewer
V2.2
Feb, 28th, 2014
This firmware can be updated from V6.00, V5.11, V5.10, V5.0, V4.12, V4.11, V4.1, V4.0, V3.0, V2.11, V2.1 and V2.0. When you want to update F55 and F5 from V1.22 and earlier, you must update to V2.0 first. https://community.sony.com/t5/F5-F55/NEW-Firmware-release-Version-2-0/m-p/195623#M6582
Regarding the procedure and functions about V2.0, please refer to “PMW-F55/F5 Firmware Version V2.0 Release note” which was released on Oct 4th, 2013. And F55 and F5 must not be downgraded to previous versions after updating to V2.11. We couldn’t guarantee any troubles after downgrading. An “All File” generated by a previous firmware version can be loaded to V6.01 of F55 and F5.
NOTE:
The new Firmware V6.01 for PMW-F55/F5 is only compatible with AXS-R5 running with Firmware V4.1. If your AXS-R5 has installed an older version, please update to the current Firmware V4.1 the same time. https://community.sony.com/t5/F5-F55/NEW-F5-F55-Firmware-Version-v4-11-and-AXS-R5-v4-1/m-p/410782#M19813
<<Modification from V6.00 of F55 and F5>>
Bug Fix
When S&Q setting was set “On” in 2K Center Scan mode or 2K Full Scan mode and the power was turned Off and On, Recording did not work. This has been fixed.
Sometimes specific All Files could not be loaded. This has been fixed.
<Notification we would like to share>
iOS setting for Wi-Fi Remote
While using Wi-Fi Remote by iOS devices and Safari, please turn off Private browse function.
All file Support
All files which are created with Firmware V6.01 are not compatible with an earlier firmware version.
<< Version up procedure >>
Please refer to “Version Up Guide for PMW-F55 and F5” - documents are below for download
Firmware download:
F5
http://pro.sony.com/bbsccms/assets/files/show/highend/downloads/PMW-F5_V601_6.01_4_2015-06-24_14-42-14_firmware.zip
F55
http://pro.sony.com/bbsccms/assets/files/show/highend/downloads/PMW-F55_V601_6.01_5_2015-06-24_14-42-07_firmware.zip

Hi, AlexK. I just found the answer for your question in F5/F55 user manual(v.6), on p. 46.In a word, you can't use your double speed viewfinder function.Refer to the last sentence. Viewfinder Double Speed function is not effective on the following settings.- When System Frequency is 59.94/50.- When Recording format is SStP Sr-SQ 444 / SStP SR-SQ Lite 422 / SStP SR-SQ 422, ProRes 422, DNxHD 220x / DNxHD 145.- When "Setting" in "Slow Shutter" of the Camera menu is set to "On."- When "Setting" in "S&Q Motion" of the Camera menu is set to "On," and the "Frame Rate" setting is 1 to 60P. At this moment, it's not available to everyone.Hope Sony make it available with future firmware update, if technically possible. Bryan

Problem with restore.I have a 2 gen running firmware version 4.2.1

Hello there !
Hopefully some smart persons here will be able to help me. First it has been awhile since i used my itune store because i didnt needed to and did a format of my computer after the last time i used it..so i had to upload my library etc and start from scratch. I downloaded a couple new games,everything was working fine..then when it came the time to sync and put these games on my ipod touch 2 gen the installation failed. I retried again and it keeps failing again and again so i choose to do a restore on it and expecting the problems would be solved. Problem wasnt not solved at all and it said an error (6) occured and i have the image on my ipod of the white cord trying to connect to itune store.
Restore doesnt work at all and it seems like my ipod is totally useless as i cant use it anymore. I did the diagnostic..it said no ipod were found. I also did the check up thing for the technician so ill paste it here maybe it will give some clues..
I have this error now as well... No iPod, iPhone, or iPad found. It also said secure link to itune store failed..not sure if these are all related to the same problems or all different at all..im clueless and need a generous soul to help me out.
Thank you tons for the help !
@Edit : Even with my other 2gen ipod i cant install these new games,it keeps failing as well..but at leasnt i havent done Restore on it yet and i fear to do it for reason you guys can guess.
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 00AAB2F80F513CD0
Current user is an administrator.
The current local date and time is 2011-07-17 18:45:37.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9500 GT
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:     {B00FE55A-1662-4EE9-B880-6B076869B9F8}
Description:     Contrôleur Atheros L2 Fast Ethernet 10/100Base-T
IP Address:     192.168.2.10
Subnet Mask:     255.255.255.0
Default Gateway:     192.168.2.1
DHCP Enabled:     Yes
DHCP Server:     192.168.2.1
Lease Obtained:     Sun Jul 17 17:51:16 2011
Lease Expires:     Wed Jul 20 17:51:16 2011
DNS Servers:     192.168.2.1
Active Connection:     Connexion réseau
Connected:     Yes
Online:          Yes
Using Modem:     No
Using LAN:     Yes
Using Proxy:     No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is off.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-07-17 18:43:19.
**** Device Connectivity Tests ****
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Contrôleur d'hôte ouvert PCI vers USB NEC. Device is working properly.
Contrôleur hôte PCI vers USB standard étendu. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C8. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C9. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CA. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CB. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod touch (2nd generation) running firmware version 4.2.1
Serial Number:     9E01226F201
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

thats just rubbish ! i bought it secondhand for my daughter to use for music and apps, but its not compatible with anything, any suggestions other then throwing it away?

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Firmware Version 1.0.2 - Need Assistance

Hi ALL,
OK, I do believe a trip to the Apple Store is needed, please advise..
For the last couple of days, I have been getting the hang of using this great product and while doing so, have noticed it getting rather warm. Today after about 45 minutes of use, it got so hot it was uncomfortable to hold (NO Case, just the iPhone). I ended up turning it off for fear of damage. I think the iPhone needs to be exchanged... Do you AGREE?
Next, with Firmware Version 1.0.2, if I get an iPhone that has this version, do I have to update the firmware to version 1.1.1 in order to use it? OR can I leave it at the version 1.0.2 and activate the phone, sync the phone and in essence do all I do now, but with version 1.0.2? ; THOUGHTS?
If I exchange the iPhone, what is the procedure on activation, since I already had a phone and this is a replacement? ASSISTANCE NEEDED?

You need to take it to the Apple store. It is malfunctioning.
You will not get a phone with 1.0.2. All replacement phones come preloaded with 1.1.1.

N73 firmware version 4.0735.3.0.2 won't pair over ...

I've updated my N73's firmware to 4.0735.3.0.2 and it will no longer pair over Bluetooth with my MacBook Pro or iBook. Nor can I send files to and from the phone. It simply drops the connection.
I'm running Leopard, but it was working fine with that on a version 3 firmware.
I've seen this issue reported in other threads on this forum.
Are Nokia aware of this issue? When will an updated firmware be released?

18-Dec-2007 03:10 PM
buttha wrote:
isync still works, but only with usb cable.
Yeah, but I didn't buy a nice shiny new phone just to lose functionality that works perfectly with my three-year old Motorola. I'd rather stick with something that works all-round than pay extra money and get something that doesn't.
The N73 looked like pretty much the ideal phone for me, but there are contenders out there that _do_ work fine with Leopard and Bluetooth, as far as I can tell, and if I can get things working just by buying one of those versus doing bizarre firmware upgrade things (which I'm guessing might be difficult if I've only got access to a Mac?) then that's the way I'll go. I like a simple life

Battery Update 1.4 does not update my battery with firmware version: 102a

Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
A quick Google search showed that plenty of other people are asking on the web about this version 102a firmware as well.
So, any idea what the deal is with batteries that have the firmware version 102a? I got this current battery under the recall program as the original one that came with my MacBook was one of the bad ones.
This whole MacBook battery business has been a nightmare. It's wasted hours of my time, and is a real black eye on what is otherwise a good computer experience.
Thanks in advance for any input.

Macophile wrote:
Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
I started thinking about it, and 102a is actually a larger number than 0110.
In any case, the updater was only meant for specific battery revisions.

Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone or iPad.

Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Mac doesn't have iCloud, preferences still shows MobileMe. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone 3 or 1-1/2 year old iPad. I suspect I need to update OS, but as software update isn't telling me to do so, can I? What version would I need to go to?

Your MacBook Pro can be updated to run Mac OS X "Snow Leopard". Buy it. That will enable you to run the latest iTunes version.
Online (US): http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
Germany: http://store.apple.com/de/product/MC573/mac-os-x-106-snow-leopard
Elsewhere: call the phone number in the Apple Online Store
Apple's price is $19.99, £14.00, €18.

Can't sync my iPad with Mac air. Box says I need latest version of iTunes on iPad and go to support and download. Site says that iPad already has iTunes?

I am unable to sync my IPad with my new Mac Air. Dialogue box says I need latest version of ITunes and to go to Apple and download. at that site it says that the IPad already has ITunes so there is nothing to download?

You need to update itunes on the computer not the ipad.

N73 with Navicore needs firmware version 2.0628.0....

Similar Messages

Maybe you are looking for