N80 - Can't detect Wireless LAN

Hi There,
I got my new N80 today, and am eager to be able to use it via WLAN... However when I go to Connect. > Conn. mgr. > Availab. WLAN it just displays (no available WLAN networks)
I have got an unsecured WLAN running at home, and a visible SSID WEP rotected network at work. Neither of them come up, yet when I search with my laptop I can see several...
Even when I sit next to the wireless router I get no better luck...
I have the latest firmware (v4.0623.0.42)
Any Help??

I've just had a look at the N80 manual located at :
http://nds1.nokia.com/phones/files/guides/Nokia_N80-1_UG_en.pdf (p85 and p86)
and it looks like you're doing it correctly, so as a first course of action I would do a format of the phone by resettting it using the instructions you can find in this post :
/discussions/board/message?board.id=smartphones&message.id=4007
However please be aware that doing so will wipe ALL the data from your phone such as information in your calendar, contacts and so on.
In order to save your data you can use the PC Suite application to save and restore the data from your phone - this software can be found here :
http://www.nokia.com/pcsuite
If this doesn't work then it's likely you have a hardware fault and you should approach your local Nokia Service Centre to get your phone fixed.
Hope this helps.
Please let me know how you get on.
Regards,
Edward

Similar Messages

  • Can not detect wireless card

    WRE54G / Win XP SR2
    My laptop and PDA can connect to the network wirelessly with no problems.
    Trying to connect my WRE54G to my network. On every attempt at AutoConfigure nothing happens. Have disabled router security and 'SPI Firewall' (whatever that is). Still nothing. Have disabled router security and 'SPI Firewall' (whatever that is), and McAfee Firewall. Still nothing. I have moved the WRE54G to within ~4 feet of the router and tried everything again. Still nothing.
    I have tried Setup but when I hit 'Next' I get the popup "Can not detect wireless card."
    Have tried a reset and have unplugged/replugged the WRE54G. FWIW, the WRE54G 'Link' light blinks blue once for about a second and turns a constant red. The 'Activity' light blinks blue twice quickly about every 5 seconds. Nothing on my PC shows any response.
    What is the wireless card that can't be found? The WRE54G?
    How do I resolve this?
    33#44

    this worked for me too.  Although I was never able to use the cisco install wizard successfully.  I am using WEP security on my access point.  I took the following steps.
    1.  From laptop, connect to network wirelessly with WEP security settings in place
    2.  From laptop, open browser, go to: 192.168.1.1, select wireless security, disable wireless security
    3.  From Range Extender, hold auto-configure button.  It took me multiple attempts (~5) and it connected so the 'Link' light changed from red to a consistent blue.
    4.  From laptop, disable security for the access point (via control panel, wireless network connection settings)
    5.  From laptop, connect to wireless access point (via control panel, wireless network connection settings).  test internet connection.  Internet should work.
    6.  From laptop, access range extender web utility.  open browser, got to 192.168.1.240, enable security, input desired WEP security settings/passphrase. 
    7.  From laptop, enable wireless security for the access point.  from browser, go to 192.168.1.1, select wireless security and enable it.  use the same settings from step 6 (from the range extender).
    8.  From laptop, update wireless adapter settings to connect using the same security settings (eg. passphrase) from step 6/7.
    range extender, access point and wireless adapter/laptop should all be connected.

  • Windows Can't Detect Wireless Network

    I have a windows xp laptop which can't detect the wireless network i've created with airport express- but it seems to be able to detect other networks around the area.
    My two other machines (one macbook and the other xp) does pick up the network.
    It seems like everything is working fine. 2/3 computers can pick up the signal, but just one of the computers can't! And i've repaired and reinstalled the driver for the wireless card, but it just won't detect the airport express signal!

    That link does not help.
    The network card on my windows xp machine works fine. It can detect other networks in the building and works at other WiFi spots.
    I think its something to do with somthing in XP and Vista that is preventing it from detecting Airport Express' signal.
    I've increased signal robustness- still doesn't work.
    I've removed the password- still doesn't work (obviously not a security problem).
    I've updated the software- still doesn't work.
    I'm very confused as my XP machine did detect it initially and connected to it successfully earlier this year, but it doesn't anymore.
    It seems like the network can be detected by some windows machine but not others???

  • Windows xp on te2000 cant detect wireless lan card

    I have a te2000 laptop the wireless lan card is detected as PCMCIA MTD-0002.
    I downloaded the drivers but even after I install windows wont use it. I get error code 10.
    How do I make it work ?
    The wireless port is enabled but it has an orange light (not green) any ideas why ?
    Thanks in advance
    Ken.

    Thnks Joao for the response.
    I downloaded the drivers here but even if I install them Windows doesnt let me use it and there is the yellow question mark in device manger & status is T'his device cannot start. (Code 10)'
    If I remove the driver and let windows search for it manually it doesnt get it, so it installs it as pcmcia-mtd-0002.
    How do I tell if it's Orinoco or not ?
    At the bottom the wireless lan has a number 00022d 366fed if that is any help.
    Notice hot the timestamps on this board are off :)
    Cheers
    Ken.

  • JDS fails to detect wireless LAN Card

    I've installed JDS on my Dell laptop (Latitude C840). The network works fine with my wired LAN card - 3COM 3C920-TX. However, JDS fails to detect my wireless card - "True Mobile 1150". Any idea?

    Winston:
    I would appreciate any info you can provide on how you got the 3com network card to work.
    I have a 3com 3c940 in my ASUS p4p800 and the
    JDS doesn't install it.
    3com say the 3c940 is compatible with Linux 2.4 kernel and SuSE, so theoritically Sun should have installed it correctly, not so.
    ASUS says I need kernel source installed in
    /usr/src/linux - there is no such directory.
    The nonexistent manual in Java Desktop certainly doesn't help.
    Any help would be appreciated.
    Can I install the latest GCC compiler or do I need to recompile a pile of programs to use it.
    I believe the ATI video card needs files and compilers installed, which the default install did not do.
    Thanks in advance for all and any help.
    New to Linux, like the JDS all except the network issues. Wireless doesn't work and realize it is because a huge company like Cisco, the grand daddy of networking which brought Linksys are not supporting the broadcom chipset. ARGH!!

  • Spectrum Expert can't detect Wireless network and show SNR info

    Hello,
    We are using the version 3.2.163 of the Spectrum Expert on a shared laptop. I was able to see SSIDs under Active Devices and get display in SNR chart before. But recently for some reason, I can can't get SSIDs and only get interfering devices listed under Active Devices and got nothing deplayed in the SNR chart. I could not trace back what has been changed and double checked most of the settings, still not luck.
    I appreciate any suggestions to get this fixed.
    Thank you!

    Humm, no comments from the experts?
    Ok, I will give it a try.
    I have SE 3.3.53 connected to a version 1 sensor card, loaded in a Compaq nw8440 laptop with an Intel 3945ABG nic.
    Win7.
    Spectrum Expert Sensor card provides the Analog RF energy data.  Only.
    The 3945 provides the digital network information via the windows API (WZC in XP) (WLAN AutoConfig in Win7).
    Various windows patches and updates have interfeered with the ability of third-party applications to intercept or latch-on-to the data from the wnic.
    SE no longer hears my 3945.  However, I plugin a Cisco/Linksys AE2500 usb unit and presto Active Device data appears.
    Interesting feature is that when I remove the USB wnic, the data link established attaches to the onboard wnic data stream.
    On my XP desktop I use SE 4.1.11 for SE Remote.
    The digital link is also broken, with everything I try.  But then you don't want/need Active Device data from your house when your remoting to a distant shop.
    I don't understand why the 3502/3602's can pass digital info right along with the analog data.
    So in your case maybe installing another wnic might help with your issue.
    David

  • Airport card can't detect wireless network

    I just installed a new Airport Card (bought thru 3rd party seller) in my Powermac G4/933 and it won't see my wireless network. I have a Belkin wireless router and my Powerbook G4 with Airport Extreme sees the network fine. Is the old style Airport Card not compatible with my network for some reason? Any help appreciated.

    Do you have your Belkin configured so that it will not broadcast the SSID? If so, you will need to go to the AirPort menu, select "Other..." and type in the name of the network.
    Also ensure that your Belkin is operating in an 802.11b compatible mode.

  • The operating system can not detect my wireless device!

    Hi all,
    I am using windows server 2008 for the operating system and lenovo 3000 G430 for the laptop. but the operating system can not detect wireless device, on devices manager always show the drivers for this device are not installed! i tired for find and search the right driver. anyone have same problem with me and have solving this problem? or at least has same equation the operating system and the laptop series.

    The problem is you have 2008 server on your laptop. The only thing you really can do is try all the wireless drivers here http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=486030
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • Qosmio X - Can't download wirless LAN driver update

    I can't downloaded "wireless Lan driver", that update was sent by Tempro.
    Why? No problems with other updates.

    Hi Gil_1,
    The question is: Why you want to download and install this update?
    If everything runs properly, you can forget the update! :)

  • SA60-742 and Wireless LAN

    Hi
    I was told when I bought this that it had support for wireless LAN, but to me it seems that there is no such built in functionality. Am I correct?
    No button to turn on/off the wireless function, and no trace of such communication in control panel.

    Hi
    I am sure that your notebook supported wireless card. First of all you must be sure do you have one or not. Please check in device manager under Network adapters if there is wireless card listed. If not you must buy one. In your case it can be some Wireless LAN Mini PCI Card or you can buy PCMCIA Wireless card and use it in PC Card slot.
    Both solutions are ok but the second one is maybe easier because Mini PC Card must be build in on right place and it is necessary to open the notebook cover.

  • I have an Extreme Gen 5 wirelessly extending a gen 4, Can I use my LAN on the extended extreme?

    I have an Extreme Gen 5 wirelessly extending an extreme gen 4. Can I use my LAN on the extended extreme that is wirelessly extending the other extreme?

    Are the LAN ports enabled to extened internet by default?
    Yes, in fact I do not believe that there is a way to turn them "off", even if you want to.
    However, sometimes users will get the extending device configured to "join a wireless network". The Ethernet port are not enabled in that configuration.
    Try connecting another computer or Ethernet device if you can to verify that things are working.

  • Can anyone tell me the ThinkPad T540 WiFi wireless LAN adapters?

    Can anyone tell me the ThinkPad T540 WiFi wireless LAN adapters full about Brand, Model and Specification?
    Thanks...

    04W3798 1 Intel Jackson Peak 2 2*2 agn+BT4.0 NGFF Card
    04W3804 1 Foxconn RTL8192EE+RTL8761 2*2 bgn + BT4.0 M.2 Card
    04W3805 1 Liteon RTL8192EE+RTL8761 2*2 bgn + BT4.0 M.2 Card
    04W3844 1 Intel Wilkins Peak 2 7260 2*2 11ac+BT4.0 M.2 Card Indonesia SKU
    04W3845 1 Intel Wilkins Peak 2 7260 2*2 11agn+BT4.0 M.2 Card Indonesia SKU
    04X6007 1 Intel Wilkins Peak 2 7260 2*2 11ac+BT4.0 M.2 Card Wake
    04X6008 1 Intel Wilkins Peak 2 7260 2*2 11agn+BT4.0 M.2 Card Wake
    04X6009 1 Intel Wilkins Peak 2 7260BN 2*2 11bgn+BT4.0 M.2 Card Wake
    http://support.lenovo.com/en_US/detail.page?DocID=PD029529
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Does Tiger require ownership (and sharing) of wired printers on a wireless LAN? My G4 (Tiger) is also wired to the LAN, and can access all wired printers through the router. Wireless Macs cannot even find the printers.

    Does Tiger require ownership (and sharing) of wired printers on a wireless LAN? My G4 (Tiger) and all printers are wired to the LAN, and the G4 can access all printers through the router. Additional wireless Macs (Snow Leopard and Mountain Lion) cannot even find the printers. Yet, if the G4 shares the printers, then ALL computers on the LAN can access them. However, this requires the G4 to remain powered. Is there a workaround that would allow me to shut down the G4 and still use the printers?

    Hello BDAqua!
    Well, I am halfway there. Following your steps on the Snow Leopard MBP, the newer printer (a Canon MX860 inkjet) appeared automatically under the "default" icon on the ADD printer window. I used the IP icon with the HP Jetdirect-Socket protocol to find and add the older printer, (an HP 4000N). That required running a configuration page from the printer to locate its IP address. I printed to both printers through this laptop with success!
    I then followed exactly the same procedure with the Mountain Lion MBP. For both installation attempts, I got an error message window: Unable to verify the printer on your network. "192.168.111" may not exist or is unavailable at this time. Would you still like to create the printer? If I click Continue, it creates the icon and name in the printer list. However when I attempt to print from an app. the next message says, 'Printer is unavailable.'
    Why one laptop finds and uses both printers, and the newer laptop does not, just floors me!
    Thank you for your ongoing assistance.
    Bill

  • TS1589 when I open airport utility it performs a scan and then say it can not detect a wireless device.  The rest of the screen is blank; all menus are blanked out.  What do I do?

    I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light.  When I get into airport utility it attempts to scan for the device but can not detect it.  The utility screen is blank - nothing to select or configure.  The menus are also blank.  What do I need to do?

    I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light.  When I get into airport utility it attempts to scan for the device but can not detect it.  The utility screen is blank - nothing to select or configure.  The menus are also blank.  What do I need to do?

  • Can cisco CAP2702i connect to Cisco3850 switch with wireless LAN controller license via another switch ?

    If i connect cisco AP - CAP2702i to another switch, and use trunk port between Cisco3850 and the other switch , can the AP able to register with Cisco3850 with wireless LAN controller  ?   or the AP has to directly connect to Cisco3850 in order to register?

    The AP and 3850 wireless management are in same Vlan( vlan202). The AP is new unit and did not join MC before. 
    What i did on 3850 :
    input command - wireless management interface vlan 202
                              - ap cdp
                              - wireless mobility controller
    Is there any config i miss out on 3850 and any config need to be set on AP ?
    From Ap console output show me "could not discover WLC using dhcp ip". Is it due to AP dont have IP address? If AP register with WLC through layer 2 , i believe there is no related with IP.Correct me if i'm wrong.
    Due to the 3850 is not a POE, the AP unable directly connect to 3850  . I guess have to use power adapter to power on the AP.

Maybe you are looking for