N86 and Windows 2000

My new N86 8MP came with a CD with OVI Suite software ( a Help file implies version 1.1). This says it is compatible with Windows XP (SP2) or later. My own OS is Windows 2000 Pro.
Is there any known software I can download that will permit info exchange and compatibility between the N86 and Microsoft's Windows 2000? Am I best to try to sell the N86 and try another phone?

Leonard1900 wrote:
Am I best to try to sell the N86 and try another phone?
Surely the most sensible option would be to update your computer to an OS that was released in this century? You'll struggle to find a modern phone that still has full support for that old OS!
Time moves on and eventually support has to end for old products.
Even with an unsupported OS you can still transfer files to the phone using bluetooth (if your PC has bluetooth). You could also try online services for managing your phone such as ovi.com.

Similar Messages

Acrobat 3D and Windows 2000

Everyone that has the Windows 2000 operating system has problems with the Acrobat 3D models. The models were created using Windows XP and were tested using Windows XP. I am assuming that Acrobat 3D and Windows 2000 are incompatible. Adobe states Windows 2000 compatibility. Does anyone know why users with Windows 2000 are having problems with my models?
Thanks

Yes, I have checked the version and they have Reader 7.0.8. I also checked that they have the latest version of DirectX. Of course there are a number of remote Windows2000 users, so I haven't the ability to check the service pack installations, graphics drivers, and so on. Many of these users are schedule to be upgraded to new laptops (with Windows XP installed).
I also have the most recent version of Acrobat 3D and have installed all the updates.
It seems the problems are different among different users, but everyone seems to have some type of problem when using Acrobat 3D and Win2000.

Nokia 6085, PC Suite and Windows 2000

I can't find the PC Suite version that will work with my phone and Windows 2000. Can someone point me to where it is so I can download it please?

Active_Lad wrote:
I have a trusty 6600 (that neither slides nor folds!) but find that I can't use the normal PC Suite that is Win7 compatible; I must use a device-specific version. However, the device specific version doesn't support Windows 7. So I am stuck. Is there a workaround to either force the device-specific version to work on Win7 of get the 6600 to work with the normal PC Suite?
Sure you can. Install in XP compatibility mode as admin.
http://europe.nokia.com/support/product-support/nokia-6600/software/pc-suite#
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Can i setup a secure reverse proxy using sun one web proxy server and windows 2000?

I've tried this on IPlanet Proxy 3.6 and, after reading the documentation, realized that SSL is not supported on the Windows platform. So I'm asking if it is supported using Sun One Web Proxy Server

Hi,
Yes, What you say is right.
"The NT and Windows 2000 versions of iPlanet Web Proxy Server 3.6 do not support SSL".
Sun One Web Proxy Server is as same as iPlanet webproxy server.
May be in future relase of proxy server SSL will be supported in Win2000.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

How can i run AirPort Express for both a Mac and Windows 2000 SP2?

I have my AirPort Express set up for my iMac and it runs fine. We have a house guest who has a laptop running Windows 2000 SP2. Can I set up Airport so that both computers can access internet wirelessly?

Just did a quick check of the Unofficial Averatec Support Forum. Several posters there upgraded the driver for the wireless card to support WPA on the 5110.
They used drivers from other computer manufacturers and indicated that Averatec has not provided updated drivers.
They were running XP SP2.
Many Averatec models have weak wifi cards. Mine included. Sorry I am unable to be of more help.
Good luck
susan
iBook G4 Mac OS X (10.3.4)

Remote Control and Windows 2000 Server

Does anyone know if it is possible to use Zenworks for Desktops to remote
Contol on a Windows 2000/2003 server ?
Regards
Johann Folkestad

OK, thanks.
Johann F
"Marcus Breiden" <[email protected]> skrev i melding
news:19gl0uyoxzfhl$.[email protected]. .
> On Mon, 27 Sep 2004 08:43:58 GMT, Johann Folkestad wrote:
>
>> Does anyone know if it is possible to use Zenworks for Desktops to remote
>> Contol on a Windows 2000/2003 server ?
>
> ZFD will not support RM of a server... you need ZFS for that...
> --
>
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Problems with JFileChooser and Windows 2000 (can't see mydocuments contents

Hi! I've an applet which has a JFileChooser component. In other Windows, I can select the MyDocuments folder and it goes there and list all the contents OK. But, in Windows 2000, when I go to MyDocuments, none of the contents is listed in the file chooser. I need to navigate through all the directories to get there (C:\documents and settings\user\my documents) and then, it shows its contents, but obviously, I don't want it to be this way because is difficult for the common user.
Any idea of why is going on this?
Thanks in advance!

Hello, You need to use something like o=isp as the
root DN, then o=yourorg.com goes beneath it.
i.e.
For the other questions on setup, just choose o=isp
as base DN when you set up the directory server. When
you run ims_dssetup.pl, choose o=internet as the DC
tree base, then choose o=isp as the user/groups base
suffix.
When you are installing messaging server it will ask
where to put the default organization, this is where
you would choose o=abc.com, o=isp
For more info on how this structure works please take
a look at this link and it will all fit into place:
http://docs.sun.com/source/816-6017-10/changes.htm#170
8Alright, I got ims_dssetup to run successfully. But now when the ims 5.2 installation is about 50% done, I get the message:
A serious problem occurred while installing the iPlanet Messaging Server Messaging SIE entry in LDAP (msg.cfgldap.sie.inf). It reported the following problem:
The server configuration for the Messaging SIE entry in LDAP (msg.cfgldap.sie.inf) cannot be created.

Oracle 8.1.7 for Unix and Windows 2000 Active Directory

Is it possible to integrate the users and passwords of an Oracle Database running on Solaris with the users and passwords defined in a Windows 2000 Active Directory? What are the requirements and the necesary steps?
I've read the documentation and it shows how to do it if you install Oracle in a Windows 2000 Server, but it does not mention about installing it in any kind of Unix.

You should consider to base your firm security and central user repository on REALLY SECURE and ROBUST product technology. Not on Windows 2000 Active Directory. Win2K AD is known to be slow and insecure. If you have Oracle on Solaris your data is secure and next step is to move user accounts to real user repository. It may be one of well-known LDAP servers. Try to read some materials on CERT Coordination Center (http://www.cert.org) which describe LDAP servers. After this you can choose the server which best suite your needs.

Compatibility Issues with CS2 and Windows 2000 XP??? This is supposed to be THE one operating system CS2 DOES WORK ON? Can someone help - I really need my CS2 back! Thanks.

HELP! Years ago - SEVEN to be exact- I PURCHASED Adobe CS2 and used it extensively. Then I was in an accident that took five years to recover from. After my recovery I tried to get back to using my Adobe products only to find that Adobe was discouraging use of CS2 and since I OWN a LICENSE and that was the LAST version I used I wanted to begin again with a version I am familiar with. Many months later, apparently I wasn't the only one who wanted to KEEP USING CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT due to OS compatibility issues Adobe continues to discourage downloading and use. HERE'S THE THING: I have the SAME SYSTEM running the SAME OS as when I first PURCHASED IT. I have downloaded the EXACT SAME VERSION of CS2. It installs fine. But I cannot OPEN the application and the troubleshooter reports there are "COMPATIBILITY ISSUES". WHY?!?!?!?!?
I'm on a PC running Windows 2000 XP. I OWN a LICENSE for Adobe CS2 and it used to run on this very same machine. I had to re-format my system two years ago so it has much more free space but when I try to OPEN the application it won't run. When I run the Windows Troubleshooter it reports system compatibility issues?! Can anyone advise me what to try now??? Thank you.

Yes, I have. My system was completely cleaned of everything and I'm just now RE-INSTALLING CS2 for Windows2000 XP from the Adobe site that gives you versions to select for your OS. I have successfully downloaded disks 1,2 and 3 and I can INSTALL disks 1 and 2, but it FAILS at disk 3. I REALLY need to resolve this today because I need to submit some work by tomorrow and the troubleshooting isn't helping!
Can you advise anything else . . . anyone? Thank you!
Khrystle13

Compatibility of windows xp with labview and windows 2000 with labview

I have a very weird situation that I am not sure even I can decribe it clearly. The thing is we have two set of equipments. One: windows 2000 with DAQ card, PCI card, the other is windows xp with same DAQ card and PCI card. All the labview software are the same version. All the program are the same. But the program on windows xp has a really weird problem. Sometimes, the signal is wiped out when I run the program and sometimes it doesn't. I am curious whether the two windows system have different order sequency. Is it clear? I am really sorry about the description since the problem is really strange. Thank you very much!

With more research, I think I probably find the problem but I don't know how to fix it. Here is how the program work. In Calibrate LC.vi, there are four buttons of "set". When you hit set button, the program will aquire 10 data points which will form the signal we need. But the problem is when I hit set button, no signal at all.So I am thinking the program didn't aquire any data in. I uploaded the Calibrate LC vi and also the Aquire Data vi. Does anyone can give a suggestion how on to fix the problem? Also, I double checked the PCI card. The interrupt request for PCI 6036E in windows2000 computer is 19, that in windows xp computer is 21. Will this be a problem too? Thanks!
Attachments:
Acquire LC Calibration Data.vi ‏34 KB
Calibrate LC.vi ‏108 KB

ITunes 7.4.3 and Windows 2000

My computer (running Windows 2000 SP4) locked up when attempting to run the latest iTunes update. After thay, iTunes was corrupted and would not run. I removed the application via the Control Panel, and downloaded iTunes 7.4.3. The installer gives me an error, stating that it is only for Windows XP and Vista. Clicking OK leads to a box where it explains there was an error, and to try again later. The only option at that point is to click on "Finish." I've tried this several times, and ended up reverting to an older version (7.1.1.5). I don't see anywhere that Win2K is no longer supported, so I'm mystified as to the problem. I'm running for now, but concerned that this situation will lead to long term issues. Up to this time iTunes has been fine, and I've encountered no difficulties. Any help will be appreciated.

I'm shocked that Apple would force all purchasers of ANY new iPod to have to go out and buy upgrades to their OS on the windows side!
This effectively makes a $149/$199 new iPod Nano actually cost the customer a minimum of $400 ($199 for the XP upgrade).
Guys--what were you thinking? At this point (and after reading the multiple posts from many sites from customers who DID upgrade to XP only to find BIGGER problems with their XP created from the attempts to use iTunes) it seems even spending another $200+ will only cause problems beyond just not getting into iTunes. I feel like I have no choice but to return my new Nano. I cannot afford to have my whole PC crash just because Apple didn't choose to support Win2k.
Again--I dont' get the thinking here.

Oracle 8i and Windows 2000 - ODBC issue

Oracle ODBC Test will not connect to a DSN that worked in Windows NT 4.0. After upgrading to Windows 2000, my ODBC stuff is hammered. I have many applications that rely on these DSN's. Does anybody have any suggestions? Please send comments/suggestions to [email protected] HELP! PLEASE!

Hello:
I need the following product:
ORACLE COM.DOT this suit include:
Oracle 8i, oracle webdb, oracle bronze support and others.
Please, somebody can tell me which is de part number or what package include all this aplicattions.
Thanks and i4m waiting for an answer.
null

Media Sync and Windows 2000

Hello,
I'm using for few days a BlackBerry Curve 8900 with a PC under Windows 2000.
Did anybody kept the installation package for Media Sync V2, which seems to be compatible with Windows 2000 ?
Only the V3 is available on the BlackBerry site.
Thanks !

MMedland wrote:
Hello,
Apparently windows 7 and media sync do not currently work together. What I mean by this is that when installing Blackberry Media Sync I receive a message explaining to me that "an unsupported operating system was detected. The following operating systems are supported: Windows XP Service Pack 2 and Windows Vista." After this, the installation explains that it will now exit without setting up. Is there something that I can do to get around this. I mean obviously I can just remove the SD Card and insert it into my laptop that way to make change but I would much rather be able to make changes to my media through the Desktop Manager.
Thanks for any help in advance.
Hi and welcome to the forums!
You can use a PC to transfer info between the PC and the media card.
Basically you will attach the USB to the BB and the PC. Don't use desktop
manager. Go to "My Computer" on the PC and the BB will show as a flash drive.
Then you can "drag and drop" files to the BB.
Use the following settings in the memory option of the Storm:
Media card support ON
Encryption mode NONE
Media transfer protocol ON (Storm and Bold only)
Mass storage support ON
Auto enable Mass storage support when connected ON
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Labview 4.1 application and Windows 2000/XP

Can a Labview 4.1 application running on Windows Nt 4.0 be moved to an Industrial Computer running Windows 2000 or Windows XP?

Within Windows XP you have the option of running a program as if it was using a different version of Windows. Right click on the program and then change the "Run As" option to whatever version of windows it is designed to work with.

Best wireless security for mixed Mac OS X, Windows XP and Windows 2000

While I am posting, I may as well ask this question too.
It seems that WPA/WPA2 are only supported by Windows XP or later.
But I also think I read somewhere that there are different flavours of WEP for Macs and Windows.
For a home network based on AE, what is the best form of wireless security to handle 2 Macs (iMac and MacBook Pro), a Windows XP and a Windows 2000 notebook (all running wireless G).
Thanks

Thanks for the suggestion Michael - unfortunately software changes to the Win2k machine are not an option for me - it has been completely locked down by my corporate IT dept.
So I think I am stuck with WEP. From scouring the Apple tech discussion posts it looks like a five letter ASCII or thirteen letter ASCII password in WEP are my only options, but I am not sure which of these is most appropriate for all 4 machines.

N86 and Windows 2000

Similar Messages

Maybe you are looking for