N91 Tutorial no data and Dictionary missing Proble...

Hello Everybody
I have two problems with my N91.
1. When I click Menu -> Tutorial, I found out that there is no data inside the tutorial. What I mean by no data is that there is no tutorial inside. Instead it gives "no data" result.
2. When I click Menu -> My Own -> Dictionary, I found that the output results are as follow "Dictionary word information missing. Install word database".
When I looked at my friends N91 phone. They still have the tutorial and dictionary.
One reason that I think the Tutorial and Dictionary is missing/deleted is because when I first bought the N91 I had some problems. In order to solve the problems I formatted it both the Hard Drive and the Phone memory. But I forgot to BackUp the Phone memory and the Hard Drive. Then After I format it I found that the tutorial and the dictionary are not working as it was suppose to be (before formated).
At that time the firmware is still not yet updated.
Then when the firmware updater software is avaible I straight away upgade the firmware in hope that the tutorial and dictionary is working again but it still not working.
I hope that someone here can help me how to make the tutorial and dictionary working again. In my country, there is no Nokia customer care available. Therefore, I cannot take my phone to repair.
Please..
This is current firmware
V2.0052
25-07-06
RM-43
N91(13.01)

Similar Messages

Date and time missing from menubar

The date, time, battery, wifi, and spotlight icons have all disappeared from my menubar. I went into my preferences and found that the "show date and time in menu bar" was unchecked so I tried to check it, but it would automatically uncheck itself instantly. I tried rebooting but that didn't change anything

Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.systemuiserver.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Date and time missing in menu bar

From time to time the date and time disappear from the menu bar. Other times most of the items disappear from the menu bar. What causes this? Yes, a reboot puts them back but a reboot should not be necessary. Any thoughts?

Might be corrupted preferences ...
Type or copy and paste the following:
~/Library/Preferences/com.apple.systemuiserver.plist
Click Go then move the com.apple.systemuiserver.plist file to the Trash.
Restart your Mac.
Then monitor the time and date in the menu bar.

File dates and names missing from library

I have recently had my hard drive replaced and started afresh. My old copy of iPhoto library downloaded photos into separate files by date order and showed the roll name I assigned. I could click on a little arrow on the left to show or hide the photos.
In case this is relevant - when I got my computer back it didn't have iPhoto on it (just about everything else was there, such as iTunes, etc) so I put my disc in again and downloaded iPhoto from the disc. Now all photos go into the library and automatically sort into year files, but they are not organised into separate roll dates and I cannot hide the photos any more and just show a list of roll names.
I tried downloading iPhoto_715.dmg, but this message appears "An eligible iPhoto application was not found in the location /Applications."
Sorry I am not really very computer literate and just don't understand what is going on.... any help would be greatly appreciated.
Thanks, Linda.

Have you explored the options under the View menu?
I tried downloading iPhoto_715.dmg, but this message appears "An eligible iPhoto application was not found in the location /Applications."
To upgrade to a later version of iPhoto requires that you purchase the relevant iLife package.
Regards
TD

How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade?

Dear wise & wondeful people:
How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade? Half of my contacts, notes, ect. were on my iCloud so have happily moved to my new iPhone but the rest are completely resistant. For example, on my iCloud I have 14 missing contacts starting with the letter A alone, however they are happily viewable on my old iPhone 4S and won't budge over into the iCloud.
There are also 3 notes missing yet still acessible on my onld iPhone 4S, the list goes on.
Your help would be most appreciated. Thank you so much.
BCHR

Hi BCHR,
If you are having issues transfering your content from your old iPhone onto iCloud so it can be transfered to your new iPhone, you may find the following articles helpful:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/TS3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
iCloud: Notes overview
http://support.apple.com/kb/PH12081
Regards,
- Brenden

Has anyone else gotten an email supposedly from Apple saying you had missing data and to update? I went to update, gave some info only to see they wanted my credit card info and money. How do I report this and to whom. Impossible to contact Apple.

Has anyone gotten an email saying your system was missing data and to update? I went to update, gave my email and password just to find it wasn't really Apple
but, wanted my credit card and money. Did not follow up. Where and how do I report this to Apple. Seems impossible to contact them.

Forward it to [email protected] and then delete it.
(112838)

Date and time keeps going missing!

Hi everybody, my date and time keeps going missing from the top bar every time I turn on my mac - sometimes other things go missing, like the airport status.
It used to happen just once a fortnight but after I installed the latest security update, it seems to be happening every time. Does anybody have a reason/fix? Would be much appreciated. Thankyou!

Hi appleoclock, and a warm welcome to the forums!
Not sure this works since that Qursical update, but the cure for that used to be...
Apple Menu Bar Icons Gone
You've probably got a couple of corrupt preference files.
In "/Users/<yourname>/Library/Preferences", delete com.apple.systemuiserver.plist
In "/Users/<yourname>/Library/Preferences/ByHost", delete com.apple.systemuiserver.xxx.plist where 'xxx' is a 12 digit (hexadecimal) numeric string.
This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).

How to store/manipulate Date and long text fields with Dictionary project

I am able to save string values into my backend (SQL Server) database in my web dynpro project but I am getting errors dealing with my date string and my long text (comments) field.
I want to figure out both how I need to define the fields in the dictionary project, how to define the context variables in web dynpro, and how to code the statements to pull the values out of the context and into fields I can use in my SQL insert.
Currently I have the date defined in the dictionary project as "date" and the comments as a 256-character string.
In the web dynpro context I have the date field defined as "date" and the comments field defined as "string". Should I define a 256-character string type and use that as field type??
In the code I am using the following to get the values:
     String s9 = (String) wdContext.nodeReceipt().getElementAt(wdContext.nodeReceipt().getLeadSelection()).getAttributeValue("Comments");
String s5 = (String) wdContext.nodeReceipt().getElementAt(wdContext.nodeReceipt().getLeadSelection()).getAttributeValue("DateReceived");
SimpleDateFormat sdf = new SimpleDateFormat("dd/mm/yyyy");
     try {
     Date dt = sdf.parse(s5);
     } catch (Exception e) {
          e.printStackTrace();
I then try to insert all of my values with the following code:
InitialContext ctx = new InitialContext();
javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup("jdbc/SAP/BC_JMS");
java.sql.Connection con = ds.getConnection();
java.sql.Statement stmt = con.createStatement();
stmt.executeUpdate("insert into AVD_GEN_REC(VENDOR,DATE_RECEIVED,TOTAL_PIECES,LOGGED_BY," +
     "ADDRESSED_TO,BLDG_NO,CARRIER,TRACKING_NO, COMMENTS) values('s1','s5','s2','s6','s3','s7','s4','s8','s9')");
   } catch (Exception e) {
         wdThis.wdGetAPI().getComponent().getMessageManager().reportSuccess("Exception "+e.getMessage());
Any help/ideas would be appreciated...

The comment error seems to have resolved itself but I still get an error with the date field:
Exception The SQL statement "INSERT INTO "AVD_GEN_REC" ("VENDOR","DATE_RECEIVED","TOTAL_PIECES","LOGGED_BY","ADDRESSED_TO","BLDG_NO","CARRIER","TRACKING_NO","COMMENTS") VALUES ('s1','d5','s2','s6','s3','s7','s4','s8','s9')" contains the semantics error[s]: type check error: new value (element number 2) is not assignable to column "DATE_RECEIVED"
The DATE_RECEIVED is defined in the data dictionary as "date", the context variable "DateReceived" is also a "date", and the statement to pull d5 is being stored to a "Date". Is there a difference between the "Date" and "date"?
Date d5   = wdContext.currentReceiptElement().getDateReceived();

Error when extracting data from ETL - Missing messages and missing InfoIdoc

Hi All,
We are using BW 3.0 and extracting data from other source systems through Informatica Powercenter (ETL). The system is working fine but when we try to extract data on 31st Dec , we get the following error. Only this load gives the error and all the other load to other data targets are going fine. All the data are one-to-one mapped from ETL to BW.
Error messages from Monitor -Status tab:-
   "InfoIdocs missing; external system
   Diagnosis :- InfoIDocs are missing. The IDocs are created in BW with non-SAP systems as source
   systems that transfer the data and metadata to BW using BAPIs. Since the IDocs are missing, a
   short dump in BW probably occurred.
   System response: No selection information arrived from the source system"
Error messages from Monitor -Details tab:-
    Missing message: Number of sent records,   Missing message: Selection completed
Highly appretiate your suggestions.
Vinod.CH

Hi Rathy Moorthy,
Thank you very much for your reply. The source system connections are OK and we are able to load data to other Data targets from ETL, we have issue only with this this particular load. The load extracts data and I have loaded the data from ETL to PSA and have checked the data content and it is correct. But when I update the same data to the target I get this error. I have also tried to update from PSA to target and also directly from ETL to target.
Appretiate your suggestions.

I am using Adobe Photshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.

I am using Adobe Photoshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.. How do I get them back?

Hi,
Which operating system are you running on?
The date & Time can be displayed by going to the View menu and checking Details - also File Names if you want them displayed.
The Album information is saved within the catalog so it sounds as though you didn't do a catalog backup on the old computer and a catalog restore on the new computer which is the recommended way of transferring elements data. Did you just copy the photos over?
Brian

Lost all contact info. All my Aps are there but all the data/progress is missing. When I plug my iphone into the usb fto synch up with my itunes on the computer a message comes up and says "enter the password to unlock your

Lost all contact info. All my Aps are there but all the data/progress is missing. When I plug my iphone into the usb fto synch up with my itunes on the computer a message comes up and says "enter the password to unlock your iphone backup file". This is very frustrating

I suggest trying the update again after an hour or two. Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.

Missing Parts in production Order no committed date and qty

Hello Guru,
May I ask your help to check our issue when we create a Production order, we got an error Order has missing parts. When check the Availability Check view, most of the components do not have committed date and qty even there are available stocks on them.
Can you help check what went wrong and its possible solution already check OPJK and OPJJ seems we have correct set up for this.?
I tried to check in CO09 on one component. from there there is also 0 committed qty and date. While the other component has OrdRes with 0 committed qty and date and there are some with values. Please help thanks.

Hi Ramagari,
OPJK
Plant AAAA
Ord Type: YYY1
Avalability Check: 2 (Check availability during order release)
Material Availability Part
Check mat. availability when saving order (tick)
Checking Rule : YP (PP checking rule - Production Order rel.)
Component Check Type : ATP Check
Release Material: 1 (User decides on release if parts are missing)
PRT Part
Checking Rule : 02 (Status check and inventory audit)
PRT Release : 1 (User decides to release when there's no PRT)
Capacity Part
No check (tick)
OPJJ
Availability Check: 02 (Individ. Reqs)
Checking Rule: 01 (Checking rule 01)
Stocks parts:
Include safety stocks (tick)
Missing parts processing part:
Checking period: GR : 0
In/outward movements part:
Incl. Pur Ord : X
inlc. pur Req (tick)
incl. dep req (tick)
Incl. reserv (tick)
incl. sales req (tick)
incl deliver (tick)
incl. ship notif (tick)
incl rel ord reqs : X
incl pld ord : X
incl prd ord : X

Deployment Issue: The saved State dictionary contains inconsistent data and might have been corrupted.

Hi,
I have been working on a C# project. It all works fine except the installer. I can install the project but if I then repair it and then try to un-install it I get the following error:
"An exception occured while uninstalling. This excepion will be ignored and the uninstall will continue. However, the application might not be fully uninstalled after the uninstall is complete --> The saved State dictionary contains inconsistent data and might have been corrupted."
This error happens whenever I try to un-install/repair/modify it having previously tried to repair it. It seems that in repairing it the .InstallState file becomes corrupted. I can un-install it by replacing the .Installstate file with a working version. However the end users will not know how to do this. Is there any way of fixing this?
Just in case it is important: It's a Framework 2 project, built in VS2005, it consists of a windows service and a forms application the service relies heavily on SOAP.
Thanks for any help,
Joe

I've got almost the same problem
I can't uninstall service that was just installed with install util. Error message is
An exception occurred during the uninstallation of the .Service.WindowsService.ProjectInstaller installer.System.ArgumentException: The savedState dictionary contains inconsistent data and might have been corrupted.
There was no repair or modify after install.
Then I had removed .InstallState file and installUtil did not find any problem in savedState dictionary ;-)
I checked InstallState file but have not found any visible problem with it
Please take a look if you know what is InstallState file
https://onedrive.live.com/redir?resid=5622404b58b0055f!132&authkey=!AA0PsRyTJUTdPgk&ithint=file%2cInstallState
Regards

This is just to report a problem with Apple updates. I updated recently and the computer brought up my 2012 desktop with all my 2014 files and data including stickies missing! Now I hesitate to do another Apple update. What would you do?

Apple Updates: This is just to report a problem. I updated recently and on restart the computer restored up my 2012 desktop with all my 2014 files and data including stickies missing!!! Now I hesitate to do another Apple update. What would you do?

If all your files are missing
You may have logged in as a different user, such as Guest. Open the Users & Groups pane in System Preferences. Your name should be at the top of the user list, under Current User. See also this support article.
If files are missing from one folder
Change the Finder view mode; for example, from icon view to list view, or vice versa.
If files are present, but seem outdated
You may have started up from a different volume (disk.) Open the Startup Disk preference pane and check the selection.

HT1263 where can I find the System Mac 9 that would be in the (original release) factory shipped iMac's prior to 2010? I'm missing key system data and cannot update to iPhoto app past 6.0.6; any advice will be helpful, thank you.

Where can I find the System Mac 9 that would be in the (original release) factory shipped iMac's prior to 2010? I'm missing key system data and cannot update to iPhoto app past 6.0.6; any advice will be helpful, thank you.

Where can I find the System Mac 9 that would be in the (original release) factory shipped iMac's prior to 2010?
What are you refering to here? Mac OS 9 came out around 2001 ( or about ). Mac OS 9 last run in an emulation mode in 10.4.11 -- Tiger. Mac OS 9 ran on PPC machines that were last produced before 2004 or so.
I think your conclusion you need Mac OS 9 is incorrect.
I'm missing key system data and cannot update to iPhoto app past 6.0.6; any advice will be helpful, thank you.
iPhoto '11, Mac OS X (10.6.8), need to upgrade system to 10.8
We need to verify some information. Are you really running 10.6.8? What hardware?
Here is how to find out what version of Mac OS you are running:
Click on the blue apple in the upper left hand of the screen.
click on this icon
Click on the first line, "About This Mac"
Most of these are numbers & that's what we want.
What version & Processor do you have?

N91 Tutorial no data and Dictionary missing Proble...

Similar Messages

Maybe you are looking for