N95: missing wlan status line
Hi
I've seen several references to a wlan status line on the active standby screen. (e.g. here: http://www.knowyourmobile.com/nokian95userguides/2860/connect_your_nokia_n95_to_a_wireless_network.h... ). However, my n95 doesn't have this line, even when I connect to a wlan using the wizard. Any ideas? I have active standby on, and my software version is 21.0.016.
Thanks
Is your phone a generic, SIM-free phone or did you get it through an operator?
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!
Similar Messages
-
are there any way to maximize the font of the status line appears in the form??
If it is already there, then I'm assuming that you'll have data at a particular intersection. (if that is correct) then use @RETURN i
if (division->some member <> #Missing)
Return the message you want to display
else
continue the calc
end if
An example is here Oracle - Hyperion Labs......: @RETURN - Planning Business Rule validation function and @RETURN
Regards
Celvin
http://www.orahyplabs.com -
Mail.app reading HTML messages - status line?
Is there a status line or other field that displays the contents of an embedded link in HTML messages?
If so, where is it, and how does one enable it?
To be precise, what I am looking for is the equivalent to the status line that Safari displays at the bottom of a browser window where the user can view the contents of a link when the cursor is hovering over a picture or text which is a hyperlink to another document or website.
Why I'm looking for this, is so that when reading eMail with hypertext links (HTML eMail) the destination of the link would be visible, so if someone sends me phishing email with a link that says "https://safeharbor.ebay.com/" and the actual html (which can be seen by using "View => Message => Raw Source") says something like https://190.121.43.66/cgi-bin/steal-this-password.exe?user=myname&email=user@exa mple.com" it is obvious that I shouldn't click on the link. Likewise, when load-pictures is off, I can hover the cursor over the graphic and see whether the graphic is just an image (http://www.site.com/picture.jpg), or is an image with a tracker attached (http://www.site.com/cgi-bin/showpic?email=[email protected]&image=picture.jpg).
I was hoping this would be in the new Mail.app for leopard since creating HTML mail was available, at least in limited form, and Phishing is NOT a new problem. Also, since Mail.app uses the safari rendering engine to display HTML in eMail, it make sense that it could also display link info.
SO, does it exist? Is there some magic key combination or hidden (well hidden) menu or preference option to set to see this simple link information? I know I can do it by viewing the raw source, but that is a royal pain in the a** to read all the gobbletygook, html, css, javascript, etc. that shows up in html pages. And maybe a good percentage of Apple users don't know how to read HTML anyway, although most do know what a URL looks like.
-CarlHow does one go back and EDIT a post to fix a typo, or other grammatical or formatting error?
(My -- strike-through -- text was not supposed to be that way, and I see I'm missing the (") quote at the beginning. I likely put in a dash or two for offsetting it, but apparently that was a formatting hint to strike it out. Arrrgh!) -
How to use another panels in status line
Hi Everyone:
Can anybody tell me how can i use another panels in the
Console's status line, I'm using the message line but i need to
show the user's name and Date-Tiem in another section of the
status line and not in display controls as i'm already doing it.
Thanks.Do you really need a JSF component for that? You can use h:panelGroup and some JS. But a simple div with some JS is also sufficient.
-
I am using the static implementation of forms. I have specified
a console window in the forms property. I cannot see the status
line in version 6.0 (forms are displayed in the same frame as
static HTML). When I used version 5.0 of forms which displayed
the Web form in a new frame I got the status line but it was
always set to "Warning: Applet Window".
I like 6.0 implementation of showing the form in the same frame
but the messages in the status line is very important to my
application. Any help?
I tries adding "USESDI=YES" parameter to the static HTML, did
not make any difference. The client side looks like doing MDI
implementation because I can move my form around within the
applet window.
Thank You,
Amir
nullAmir Razavi (guest) wrote:
: I am using the static implementation of forms. I have specified
: a console window in the forms property. I cannot see the status
: line in version 6.0 (forms are displayed in the same frame as
: static HTML). When I used version 5.0 of forms which displayed
: the Web form in a new frame I got the status line but it was
: always set to "Warning: Applet Window".
: I like 6.0 implementation of showing the form in the same frame
: but the messages in the status line is very important to my
: application. Any help?
: I tries adding "USESDI=YES" parameter to the static HTML, did
: not make any difference. The client side looks like doing MDI
: implementation because I can move my form around within the
: applet window.
: Thank You,
: Amir
I'm developing with Forms 5.0.
With Microsoft Explorer the Frame always show the message
"Warning: Applet Window", but with Netscape Communicator 4.5 IT
WORKS!!! It always show the correct message.
null -
Downloaded the most recent versin of Itunes. Now I can't see the total number of songs in my Itunes library as before. It used to be on a status line at bottom of song Library screen. Where can I view the Total ???
From the View menu > Select "Show Status bar...'
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/ -
I want to hide status line containing 'Record 1/1' , OSC. But i want to display status line that shows 'Transaction commited' etc.
How can i disable it?
nullHi,
In order to suppress information on the status line, you must hide the entire
console. To hide the console, set the Console Window property to <NULL> in the Form Module Properties sheet. The Console Window
property cannot be altered programmatically at runtime.
The console contains the status line and the message line. If the console is not displayed, then NO messages on the message line will be displayed either. All Oracle Forms Runform messages and custom messages would have to be displayed using alerts by coding the ON-ERROR and ON-MESSAGE triggers.
Best Regards,
Deepak Rai -
Using Adobe Reader X version 10.1.3 it misses printing some lines but prints perfectly with version 8.1.2. Is anyone else experiencing this problem?
I always match the entire project to the footage so this problem doesn't happen.
I have an after effects project dynamically linked to the project. I think that may be causing the problem somehow, although that is also a 1440 project.
Again, I had no problems before. I've done 10+ projects for this client with the same settings and am only now having problems.
I never recommend shooting in 1440, but that is what they wanted for whatever reason. Always 1920x1080p or 1280x720p. -
[SOLVED] vim status line invisible/wrapped in terminal unless I resize
Hi all,
Whenever I open a file in Vim within a terminal (urxvt, Terminator, xterm) the status line at the very bottom is either invisible or wrapped onto a new line (ie "bot" or "All" will span a line) until I manually resize the window by dragging an edge - this seems to fix the issue (and Vim continues to display correctly even if I continue resizing) . I tried changing the window geometries (in .Xresources for urxvt, and in terminator via --geoemtry) without luck. Changing fonts (type, size) doesn't help either.
I'm running Openbox on a recent Retina MacBook Pro with nVidia drivers, with infinality-bundle installed.
The same behavior occurs under Awesome, and I tried various Openbox themes, all with the same result. So, perhaps its a bash or nVidia issue.
gVim works perfectly though.
Any thoughts?
Thanks!
Last edited by iamjerico (2014-03-26 19:54:12)The status line - the very bottom line - is either (1) below the visible portion of the terminal window - and remains so even if I page down repeatedly (urxvt) - or (2) is visible but the text appearing on it, like "bot" or "all" that are normally visible on the lower right corner, will wrap around (Terminator). That is, I'll see "b" on the bottom right corner and then "ot" on the bottom left but a line lower. In either case, if I manually resize the terminal window, it "catches up" and all appears correctly.
Update: when running Vim without opening a file (just "vim" from the command line), in Terminator ALL of the visible text from the startup text is wrapped (ie "Vim is open source and freely distributable" wraps onto a second line). In urvxt, that text appears normally but the status line is not visible. In both cases, a window resizes corrects the display.
Very strange. -
Chart missing Columns and Lines
I have created a Column Line Chart and allow the user to input different values that change formulas to produce the columns and line on the graph. I can see the graph perfectly fine with all columns and the line on the canvas view. Whenever I try to export to any file type, upon opening the file, all but two of the columns are missing and the line is missing in all spots except for at two points.
I've noticed that if I remove my formulas from my spreadsheet and just put in hard coded values in place of the formulas, the report populates correctly, but this takes away all functionality of allowing the user to adjust inputs, which is the entire reason we are using this software.
Please advise how I can fix this issue so that my chart shows all data.
Thanks,
DanHi Dan
This is common - this can happen due to possible reasons like
1) The data in preview mode on which the formula is applied is not same as the hard coded or the one in design mode. So when you go to preview its different view in the chart
2) Some other component is messing with the excel ranges you are using for formula for the chart - some components which can drop values as per their destination property.
This is how you need to test
- Add a test spreadsheet table component ( from selector category) and map all the cells that's included in the formula - the original range, the input values from the user interaction, and the final ranges with formula and the range to which chart is mapped to if different from the formula range.
- Preview the dashboard and see whats going on in those cells and if they all are behaving as expected.
- if the original data range and the input data are what you anticipate and not changed by any other variable you are not considering.
Use more than one spreadsheet table if the ranges I suggested are not contiguous.
Please try the above and post the updates.
Thanks
Runali -
How to include the missing PF status in screen
Hello All,
How to include the missing Pf-status in screen?
Regards,
Lisa.check if the pf-status you use currently has all needed functions
if yes, probably you call it with an EXCLUDING statement and you have to remove some functions from the internal table of exclusions
if no, you have either to enhance this pf-status with additional functions either to copy it and enhance the copy, then call the copy in your program -
How can I put information in the status line at the bottom of the window
Hi, I need to put some information on the status line, like username and database name. How can I do this?
If someone know how to do this and could show some sample code, please, put in this.
Thank you,
SanThanks, but this put a message in the message line, and I need to put this in the status line below the message line, where are displayed messages like "enter query", "execute query", "list of values" and etc...
Is this possible?
Thanks -
Frm messages only in status line not as pop-up
How can I tell forms to display the frm-messages like
frm-40406 transaction completed...
only in the status line without any pop-up window which I have to confirm?I don't want to send my own messages.
My thread is about automatic generated Forms messages.
On my Deveplopement-Workstation, the FRM-40406 message text only appears in
the status line. That's ok.
On the server IAS 9.0.4 the message appears on the status line, but also as pop-up message.
Can I configure this anywhere on the server? -
Replace SAP logo in status line in the new Signature Design (SAPgui 7.10)
Hello,
with SAPgui 7.10 there is a new desing available, the Signature Design. Recently a customer asked me, if it is possible to replace the small SAP logo in the middle of the status line (at the bottom of the SAP window) with another image.
I don't know this, has anyone an answer for me?I doubt so (although I don´t know 100 %).
The bottom SAP image has the same functionality as before in the right upper corner (you can doubleclick it to send support messages to SolMan system). You couldn´t change the right upper corner image.
Markus -
Suppress Message / Clear Status line
Hello Gurus,
I am using function module MB_PHYSICAL_INVENTORY in a RF-transaction. There I am collecting all return messages into an itab to show a protocol in a small popup.
The problem is, after completition of the posting a message (type S) is shown in status line (e.g. "Diffs in phys. inv. doc. 240307242 posted with m. doc. 3702433524").
Is it possible to suppress this message somehow or is there a way to clear the status line manually (w/o displaying another message)?
Help is much appreciated,
Alej
PS: Points will be rewarded for helpful answers!The complete process is using three function modules. The first is the above mentioned MB_PHYSICAL_INVENTORY. Even if this function module was executed successful (BLING message appears on the status line), the other two could have run incorrect.
For Example:
FM 1 correct (Status message)
FM 2 correct
FM 3 ERROR
So I want to display the user a complete log of the results of all function modules and the user shouldn't think 'Everything was fine!' because of the message of the first FM.
I hope I could clarify my problem.
Maybe you are looking for
-
How to Post a a debit and credit in background? Reclassificaton
Hi Gurus, I have a question regarding how to post a debit and credit in background? In fact I create an internal table and displayed in ALV grid where there are the amounts in local and transaction currency which are atypical. And after I have to pos
-
I need urgent help with this code to read xml nodes from an xml file. This is the HttpService <mx:HTTPService id="appraisalData" url="assets/appraisal.xml" result="HandleDataResult(event)"
-
Extra page in renumeration statement
Hi, I am facing a problem in renumeratrion statement. We are doing upgarde from version 4.7 to ECC 6. We tested everything ok in DEV of ECC 6 and transported to QA. Now in QA, when we test and print renumeration statement, we see an extra page which
-
OK so . . . I accidentally deleted everything from my iPhoto library. I still have my orginals. However, whenever I try to drag them into iPhoto, it says that it already exists. But it is not there at all . . . Should I try re-installing? How might o
-
Discoverer Desktop 9i - how to find worksheet id
Hi, I'm using Oracle9i Discoverer Desktop version 9.0.2.0.0. I miss some information to create the url needed to launch the workbook from internet explorer. The url is composed in this way: http://DNS/discoverer/viewer?nlsl=it-it&cn=connection_acrony