N95 says Memory Full when opening a Help file

On most menu screens of my N95 you can select Options and then Help.
For some reason I currently get a 'Memory Full' message when I try and view the Help file.
My phone is showing 75Mb in use and 72Mb free when doing a memory check in File Manager.
This occurs whether my 2Gb card is installed or not.
Any suggestions on a fix ? I'd rather not have to reload f/w or or do full reset.
Thanks
Nokia 808
Nokia CK-200

On the desktop, what is your operating system & version?
What is your Reader version?
Does the PDF actually open in Adobe Reader?

Similar Messages

N95 8GB Memory full when synchronising. No way!

I've got loads of memory on phone and mass memory. Why do I get 'Memory full. Close some applications and try again.' when I try to synchronise with N series pc suite on xp media centre?

Hi, ive been racking my brains because of this as i was wanting to sync before updating my N95's software..
I had 1.4gb free on my memory card.. and about 110mb free on the phone.
Finally figured The reason why my sync was failing was a very large note (which i had forgotten about) 770k.. after deleting this.. phone sync's perfectly.
Have a look for large notes!!
neebong
The man from delmonte.. He say Yes!!

Illustrator cs4 says memory full, images gone, please help

is anyone awake? It's almost 3 inthe morning and I'm in computer ****. I might loose hours and hours of work. anyone help with mac memory?

You haven't been saving frequently as you work? Now you know why that's essential. Already knew, just forgot to do it? I've been there and done that myself, usually in the wee hours of the morning, operating on coffee and two brain cells. For most of us, that's not a good time to be doing important work. Leave the machine as is, get some sleep, and come back fresh. There's no way to recover the lost work if it was never saved, but don't start doing it over again until you're sharp enough to save it as you go.

Out of memory error when opening an .xlsx file in numbers v1.6.2 on ipad 2

The file sizes are too small (38KB) for this to be a true "out of memory" issue. Any suggestions? I didn't have any problems before updating numbers to the current version.
I haven't downloaded the new iOS 6 operating system. Is that the problem?

Ended up being a problem with the Excel file we were using. Recreated the file and all was ok.

I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

[N95 8GB]Out of Memory error when opening 15MB pdf...

What is the file size limit when opening a pdf file? I have a 15MB pdf file that cause 'Out of memory' error when I opened it with the PDF Reader that comes with the phone.
Thanks.

Hi,
It seems that problem is file specific, so could you please share a file with me. I sending you a private message.
Regards,
Anoop

E66- always says " memory full"

Hi guys,
do somebody has the same problem- and solution. I installed latest 300.21.012 on my E66, but often / 2-3 times per day/ the phone just stops to answer to me and when i push some of the short buttons , the device says : "memory full, please close some app" and that is it. I have to restart the phone. The terrible thing is at morning clock alarm- i woke up and see that the phone is already blocked by himself.
I format memory card, made a hard reset, after that update /reinstall latest firmware, but still problems.
When a make a restore only of contacts & calendar appointments the problem is often. When i input them manually / ~70 rows/ the problem is showing seldom.
Funny thing is that i do not have any problem with camera strips
My greetings to Nokia for the phone, but i think the firmware is not suitable.
Can somebody tell me some solution for this problem, or this phone is just not reliable.

My E66 problems after update /discussions/board/message?board.id=swupdate&thread.id=53928
I can't help but, something memorycard accsessproblems after update,
(i think Nokia made some misstake in the update with the memorycard accsess).
memorycard may not always work, then it store averything on phone memory instead.
I by a new cheep 2 GB memorycard, with that i see no moore problems.
Next update i'm gonna try without memorycard in the phone.
Message Edited by kjello on 22-Jul-2009 09:22 AM
Kjell O

App Memory Leak When Open iPhoto

Hi everyone,
Does anyone have experienced app memory leak when open iPhoto? My free memory immediate dropped from 5000 mb to 15mb when I open iPhoto and the app never open. If I force to quit iPhoto, all return to normal and everything work fine. I only have iPhoto app running, not sure what caused the memory leak???
Looking for help.
Thanks
JHML

Actually the new library was a test to see if the problem occurred only with your current library or with all libraries. The fact that switching libraries cleared up the problem is just serendipitous.

Map Loader keeps saying memory full!! (Nokia 5230)

i was trying to download map for Hong Kong which takes 44.9MB
and i tried so hard to squeeze my phone's memory, which has 49MB free now
and also memory card, 76MB free
also i chose memory card as the default memory for storage
yet when i click download it still says memory full
can anyone please help

That is a bit of a tight squeeze. I would advice against saving it in the phone memory.
Now, there is a setting in Ovi Maps which limits how much of the memory card you can actually use for map data. Even though there mioght be space on the card, you might still have exceeded this setting. To increase this setting. when in Ovi Maps, goto Settings>Map>Maximum memory use. Increase this as necessary.

Error message when I try to open the "help" files.

When I try to open the help files in Elements Photoshop 10, I get the following error message in a pop up box. At the top, the box is labeled "Adobe AIR" The message: "Application descriptor could not be found for this application. Try re-installing or contacting the publisher for assistance."
I have completely uninstalled and reinstalled both my Elements programs as well as adobe air, and have updated everything that I can think of and a few more things, and still get the same message. Since I am one who often uses help files, I'd appreciate any help with this.
Thank you.
TwoCollieTom

You can directly download the help files from this location http://helpx.adobe.com/photoshop-elements/archive.html

When opening a filn in illusrtator CC I have memory plroble,. Opening the same file in CS5 does not make problems

When opening a filn in illusrtator CC I have memory plroble,. Opening the same file in CS5 does not make problems.
How can I get in contact with an adobe employee, where I can finally solve my problem with CC (with whom I can send email back and forth or who calls me)... On my PC CC does not work well... I often need to use my old CS5 version.

You have not provided any proper system info, so nobody can even guess.
Mylenium

Office 2013 applications cannot be made to show the "Documents" folder when opening and saving files

(Windows Server 2012R2 and Windows 8.1 PRO)
We are redirecting the user's "Documents" folder to the network (using Folder Redirection). The OS hides this fact however, and most applications simply see the "Documents" folder when opening or saving files, including Office 2003.
Office 2013 however displays the actual path, which in this case is:
\\sever1\redirect$\username\documents
Even if you forcibly set the "Default local file location:" in the Options Save area to the 'Documents' folder in, say, Word, Word immediately converts the local path to the network path.
Is there anyway to get Office 2013 to follow the virtual path? All of other apps follow it and expose the users only to "Documents".
Thank you so much.
Dana

There's nothing in my FAQ concerning screen savers, so I'm unsure why you decided to take that approach. From your description, it looks like you only tried a few of the suggestions before throwing in the towel. That's fine, it's your call.
I don't have the problems you described with 10.4.7. Usually when folks have problems after an update, these are caused by either installing an update on an already-corrutped system or they've installed third-party applications or hardware that have been rendered incompatible by the update.
Before installing software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Error when opening table container file keydb read only

Hi Guys,
We are installing solution manager 4.0 on windows/sql but we are getting following error and couldnt continue the installation
FKD-00070 Error when opening table container file C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
ERROR 2008-06-04 20:10:56.843
FKD-00049 XML - Parser error: error: no DTD specified, can't validate in line 1, 1
in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml.
Please help
Regards,
Santosh

Further info
keydb.xml is empty and the directory has got write access for everyone
regards
Edited by: Santosh Keerti on Jun 4, 2008 1:29 PM

Adobe reader XI crash and hangs when open the pdf file

After update the adobe reader xi 11.0.10, the reader always crashes and hangs when open the pdf file. Please help me how to do.

Ben Leung wrote:
HThis situation is started after I clear the pop up advertisement.
What kind of advertisement? In Adobe Reader? Can you post a screenshot of that: https://forums.adobe.com/thread/1070933
Regarding the crash, can you try disabling Protected Mode through the registry: download, unzip, then run the registry script https://files.acrobat.com/a/preview/49eeb48b-07c5-4502-984c-8a25259914fa

Missing fonts warning when opening a Keynote file

I'm using Keynote 2.0.2 on a Mini Mac. Having searched for an answer to the ubiquitous "Missing Font" problem when opening a Keynote file, I was wondering if upgrading to the latest version would solve this problem. Unless it does, we would have to think twice about upgrading the software. A lot of users seem to have the problem with version 3 too. Does anyone have a solution to this? The presentation runs perfectly well, but the warning message is annoying and doesn't look nice when presenting to clients. HELP!
1.42 GHz Mac Mini PPC G4 Mac OS X (10.4.8) 1GB DDR SDRAM

I've experience this same problem multiple times. There is a way to get rid of the troublesome font, thereby getting rid of the annoying message. I may be glossing over a step or two, but it goes something like this:
(1) In the Finder, right click on the Keynote file and select "Show Package Contents"
(2)Locate the index.apxl.gz file and open it. The file exands -- then open the index.apxl file with Textedit (or Word). Throw away the gz file.
(3) Do a search and replace -- find all instances of the troublesome font name and replace it with a non-troublesome font name, such as GillSans
(4) Close the text file.
Opening the Keynote file should now proceed normally. Note: Better practice this on a dummy file until you are sure everything works. I imagine that if you muck up the index file that the orignial Keynote file might be toast!
Rob
Black Macbook Mac OS X (10.4.7)

N95 says Memory Full when opening a Help file

Similar Messages

Maybe you are looking for