N95 V21.0.016 Update - Calendar Error

After performing an update using Nokia Software Updater, I have restored from my backup and the calendar info hasn't come across.
Any ideas/solutions on how to fix this?

Hi,
I have the same error. It would be nice if calendar events also would be backup on the memory card. You can not always access computer to use pc suite. Can really someone advise.
Regards

Similar Messages

New firmware for nokia n95 v21.0.016

greetings all,
i own a nokia n95 classic. and there is new firmware available is v21.0.016 which has few interesting features. and i would like to update to that....
but it is available only at ncp......
which asks to keep your device for a day or more... and they perform lot of rnd on it....( cannot guarantee ).
i cannot trust them...(specially in my city).
so when this firmware is available through nokia software update software...........

not all product codes has v21, try to wait a little while and it should be available for yours.
Feel free to hit the KUDOS button if you think I deserved it.........

Battery indicator on N95 v21.0.016

Hello all:
Ever since I updated to the new v21.0.016 firmware, the battery indicator on my N95 acts kind of strange.
For two days it shows a full charge (seven bars) and suddenly, in less than a couple of hour, goes down from seven bars to one bar (no WIFI, no bluetooth, no calls).
Has anyone experienced the same?. It looks like an annoying bug in the new firmware...
........N70, E61, E90, N95, E71, E72, N8

I'd like to update my status. After the upgrade to version 21, the phone couldn'd be connected to the pc too. I got it to a NCC and they said that the phone's board had a problem and had to be sent abroad to nokia to replace it... I'd like to add the following too. At NCC I was told that the update that nokia provides through Nokia Update Manager is not the actual update. If we want to update the phone we will have to take it at a NCC because the update they have is three times bigger in size and it's the full one. (v21 is 166MB through NUM, and the update the NCC has is about 300). When I asked why is this happening they said: "If the full update was provided over the net, then there wouldn't be any reason for the NCC to exit". That's a shame. This conversation took place in Greece. I don't know what other NCC say, or if this is the policy of Nokia in order to get money (they said that the update would cost me 15,5 Euros).
PS The phone was bought 3 months ago, but if they "thought" that i had updated the phone through other software (?) I would have to pay for the actual update anyway....
Message Edited by nikhatzi on 26-May-2008 02:54 PM

N95 v21.0.016 after using Nokia Maps 2.0 Beta on v...

After updating software Nokia Maps returns to v1.2 wk48 b01 and of course maps in E:/Cities need to be deleted and old maps downloaded using Maploader v1.3 after running Nokia Maps to define folder structure. However on a microSDHC with 708.5Mb space left for maps(Maploader definition) it allows me to download and install a 20Mb map but after downloading a further 120Mb map it won't let it install with the message "Your local drive might be full or your access rights are insufficient".
This is of course great news when you've wasted about an hour downloading it!
Happy to have helped forum in a small way with a Support Ratio = 37.0

28-Mar-2008 08:02 AM
harrykaa wrote:
Why did you not choose to stay with the 2.0 Beta version?
Hi harrykaa
Essentially so that I am aware of the problems (if any) experienced by users of N95 with the version of Nokia Maps pre-installed in v21.0.016
The answer to my problem was to replace the existing "diskcache" folder in "Cities" with one I found on an older memory card, just wish I had thought of this solution sooner.
Happy to have helped forum in a small way with a Support Ratio = 37.0

N95 V21.0.016 UPGRADED WITH 4GB CARD - PHONE DEAD ...

IT IS WELL, VERY GOOD & FAST FOR MY N95-1 UPGRADED WITH V21.0.016 IF NO MEMORY CARD IS INSERTED. ONCE INSERTED MY SANDISK 4GB (WITH ONLY 3GB USED), IT CAUSE THE PHONE CANNOT BE STARTED....THIS IS REALLY NOT MAKE SENSE AS LATEST VERSION EVEN CAN FUNCTION PROPERPLY EVEN TO 8GB CARD ! NOKIA PLS CHECK WHY MEMORY CARD ALREADY CAUSE THIS PROBLEM! V12.0.014 IS BETTER FOR ME IF NGAGE IS NOT SUPPORTTED V12, I SWEAR I WILL NOT UPGRADE TO V21...PLS SOLVE OUT QUICKLY FOR OUR V21 USER WHO FACING THIS PROBLEM AROUND THE WORLD

i guess this is because of the applications and files already in the memorycard.
why don't you try formating the card (after copying the data elsewhere, if you need it later) and switching on the phone with the formatted card.
if it works, you can install the applications one by one back again and figure out which application is causing the problem.
please let me know if this works.

N95 v21.0.016 bug(?) in SIP phone

This one had me stumped for a while...
My N95 is hooked up to my own Asterisk server and, as such, rings whenever someone calls me by VoIP or on any of the DID numbers I have attached to my VoIP account. It's logged in as extension 2002 on my server whose local IP address is 192.168.2.104.
Or at least it should ring. Sometimes it did, sometimes it didn't (past tense because I've figured out a workaround).
I finally managed to narrow it down to the fact that it didn't like accepting anonymous calls. Indeed, if I followed my Asterisk logs when receiving an a call with no caller ID, I'd see this, and obviously the phone wouldn't ring:
-- SIP/2002-081f4358 is circuit-busy
[May 8 14:27:03] WARNING[3697]: chan_sip.c:12741 handle_response: Remote host can't match request BYE to call '[email protected]'. Giving up.
I've managed to work around the problem by adding this to my dialplan in extensions.conf:
exten => _X.,n,Set(CID=${CALLERID(NUM)})
exten => _X.,n,GotoIf($[ "x${CID}" = "x0" ]?change-it)
exten => _X.,n,GotoIf($[ "x${CID}" = "x" ]?change-it)
exten => _X.,n,Goto(call-extn)
exten => _X.,n(change-it),Set(CALLERID(ALL)=Anonymous Coward <2999> )
exten => _X.,n(call-extn),Dial(SIP/2000&SIP/2001&SIP/2002,15,tT)
While this works, ie. the phone now rings for anonymous calls, is this not a bug in that it should accept them anyway (as it does for GSM calls) and just display "private number calling" or something similar?
FWIW, I didn't have to do this on firmware v12.0.014, so this is a bit of a regression.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Thanks, but I've not had the N95 for more than a year now.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

N95: can not sync contacts & calendar after firmwa...

i have a n95 and i've updated without error to last firmawe version.
this firmware update delete all data (contacts, calendar, notes etc etc) from my mobile and now when i want o syncronize with outlook y can not do it. zero record are sincronized and i have no errors.
i'm thinking to uninstall pc suite and install again but first.... i prefer ask here.
i've change several times sync info and configuration in order to make a change but when i back to outlook i can not sync.
thank you in advance
Salud2, Guind@Soft
.: Haz lo que puedas, con lo que tengas, estés donde estés :.
Solved!
Go to Solution.

thank you very much cricfancy for you answer,about information that you request...
*#0000#
v20.2.011
13.05.08
RM160
h2.01
pc suite 7.1.18.0
i could work with others pc suite tools like send sms, see new contacts created after upgrade).
it seems like pc suite did not know that there are differences between phone db and pc suite db because they had the same "change number". i thinks this value would be reseted after upgrade but for any reason did not do it.
Salud2, Guind@Soft
.: Haz lo que puedas, con lo que tengas, estés donde estés :.

N95 & Auto-Rotate Function in V21.0.016

Wife & I both have new N95's RM-159 from 3.
Firmware Version is V21.0.016 as mentioned in subject line.
What neither phone seems to have is the auto-rotate function. After hours of searcing I've been unbale to find out why with this version of the firmware this isn't supported on these phones. Under Display settings no mention of auto-rotate. I've checked software updater & am told the FW is the latest revision.
Do I need to install the accelerometer plugin to get this function to work as you have to do with rotateMe(c)Samir?
Any help would be appreciated before I ring 3 customer services and ask them why it isn't supported.
TIA.

Your phones are normal.
The N95 doesn't have that function as part of it's firmware. Only the N95 8GB has had this feature added in the v20 firmware.
The firmware on the N95 is not the same as the firmware on the N95 8GB.
It is rumoured that the feature will be in the next firmware release for the N95 which is due in the next few months.
So the only way to get auto rotate on the old N95 is to install a program like rotateme.

Need help: URGENT : N95-1...V21.0.016 BUGS! WHEN N...

now after get my N95-1 upgraded to latest V21.0.016, i hav to on my phone without memory card insered first only can start my phone smoothly...after thst i put my memory card by way of "hotswap" into the phone...if i just on my phone with memory card in, u all know my phone will wait until 10 to 15 minutes to boot up & access menu...when press *#0000# or *#06#, the phone will not shown the details, but if i on my phone without memory card, it will show ...my 4GB memory card is no problems at all...moreover i only restore setting to my phone & all my file were saved to memory card...this indicate there is firmware system hav problem in boot up to get access to memory card...pls pls solve this serious bugi..u know my memory card always swap in & out will spoil 1t !

hi...
I understand your predicament... Its awful 2 experience such a thing.
By the way, i am also using n95 v21 and a sandisk 4gb card.
If i understand it right, after you updated your firmware, you restored the back up settings. And you also mentioned that problem only occurs when you are inserting the memory card.
It doesn't necessarily mean that your memory card is faulty. When i still have v12 and i updated it to v20, i was using a 2gb and it happened to me, so what I did was 2 copy the files stored in my memory card to computer, put back mmc to n95, format mmc and then manually copy back my files from computer to n95/mmc. And it worked for me!
Hope this works for you too.
CeS
"The best index to a person's character is how he treats people who can't do him any good, and how he treats people who can't fight back"

N95 camera problem v21.0.016

Need help!!! After updating my N95 into v21.0.016, the quality of the camera degraded... I don't know if its the flash.... the flash still flashes but seems that it doesn't have any effect in the image.... TO explain further, I'll give an example: Before, when I take a picture on newspapers or books, I can clearly read the letters printed on it, but now, after upgrading, it's blurred, I can't barely read the letters....
The only good side of this upgrade is that the battery life increases... But still, it really sucks... I want my original camera quality back...

try updating again....im guessing u did a data restore?
instead of doing a data restore try dragging all ur data onto ur desktop and use the same method to replace the data to ur phone......rather than doing a backup
also try to reformat your memory card(this will delete all your data) so make sure u save everything u want via a drag and drop to desktop method
after uve saved everything reinstall the fw
hope this works

N95-1 FW V21.0.016 query...pls help!!!

anybody suffer any problems for this new FW v21.0.016 for N95-1 upgrade? if i don insert memory card , everything seem OK after fresh upgrade...but when i restore back back-up folder via PC suite b4 upgrade (only bac up all phone memory data) & insert my Sandisk 4GB memory card which got mp3, photos...& start my phone...cannot boot up forever...hang..no choices u hav to take out battery...when open menu also very slow like goin to stop...

Yes I have problems too, I backed it up, charged it, connected to Nokia Charger with Nokia supplied memory in. Half way through it said error, remove battery and power, reapply and push power switch. Then it said it was disconnected but it was not and it has been dead ever since. I have tried other usb slots, battery only, battery and another charger.
One thing though. With battery only at least it vibrates when you push the power switch. Add the charger and it does not. Also on battery only, a few devices momentarily show up as being connected, just to vanish again.
I have a feeling it is dead now as it just sits saying nokia.
Message Edited by 1tonnefc on 16-Apr-2008 11:24 AM

N95-1 V21.0.016 MAKE APPLICATIONS DOWNLOAD FAIL !

I notice that this V21 in my N95-1 make my application/software/games installed in difficulty ! sometimes some games & application just cannot be installed properly...but it "eating my memory card memory". I do check my application manager but suprise to know that application not installed but memory already being occupied ! If some games successful installed but it really take times to installed ! Previously i was using N95 with V12.0.014..no such problem at all...install anything is so fast & no system "crash" with same application or games as now...It seem like phone system have to travel a long "circle" only can get thing done , worse still sometime is out of installation after long "travelling".
I really sad with this firmware V21.0.016 with N95-1 released ......

Something you are installing. Some third party application is causing this problem.
Try NOT installing all those games and other applications or install one by one until you find which one is causing the problem.
640K Should be enough for everybody
El_Loco Nokia Video Blog

N95-1 (V21.0.016) get slower & slower ...?

i used only Sandisk 4GB sdhc card , used up 2,885kb card memory, available card memory is 993kb...phone memory around 100MB. Every time i on my N95-1 (v21.0.016) , i hav to wait abt 10 minutes to get the phone totally boot up to menu...i installed quite a number of games in card memory, now my RAM available when just boot up left 25MB instead of 28MB ...is this more Games will causing this problems? I also installed more than 1,500 mp3 songs in card memory but i don think this will cause the problem..Now i wonder i copy my 4GB data to Sandisk 8GB card will hang my N95-1 if i save more content in 8GB card? anyone can help?

This is characteristic of installing applications and themes to the mass memory. Do not to that.
Once the phone has started up next time, uninstall all the applications and themes on your memory card and install them in the phone's central memory.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

N95-1 V21.0.016 HIDE APPLICATION ICON AFTER INSTAL...

I used Sandisk 4GB SDHC card with my N95-1 V21.0.016, currently had all my mp3, MV,internet links, photos, wallpapers, software, & games all installed in this 4GB card except "Yahoo Go" in phone memory (as advised by Yahoo), my 4GB card available memory is around 890MB left with 2,989MB used for the above. i found out that original Nokia apllication like "WLAN" icon, "Dictionary" icon, "Search" icon already HIDE in phone ...coz when i go to assign shortcut item, i found there are still exist & still can be assigned shortcut in navigation button but it won't shown in phone menu...anybody know why? I can say that it is pretty good to start a fresh upgrade firmware like V21.0.016 for N95-1 with fresh installing ie not RESTORE from previous firmware back up data...but we had thounand of valuable data ..so what can we do? So when think of this important data , we r sure to restore bac. Once restore sometime depends LUCK..If lucky enough all data restored is OK & workable but not all the time is so good..I already reformat V21.0.016 three times but there is some problem must be happen....tired !

Something you are installing. Some third party application is causing this problem.
Try NOT installing all those games and other applications or install one by one until you find which one is causing the problem.
640K Should be enough for everybody
El_Loco Nokia Video Blog

N95-1 V21.0.016 CANNOT READ MEMORY CARD WITH PREVI...

After i done my upgrade for my N95-1 fr V12.0.014 to latest V21.0.016, everything seem fast & good with the formatted standard 1GB micro Sd card..but when restore phone memory setting (which were previously bac up thru latest PC Suite mode to PC), it restore very slow...nevermind coz a lot of activation key, licence key to be put into phone, after 3 hrs only successfully restored just the setting...phone auto ask for restart now...terrible nightmare happen...my phone became very very slow to respond...nevermind coz 1st time restart...after wait i think half an hr, only can move the menu smoothly...to my BIG SUPRISE ! when i off my phone & restart 2nd time...it wait even longer ...abt more than 20 minute to start the phone...after that seem like hang . WHAT IS THIS , NOKIA ! U DID NOT TEST ON RESTORE ALSO CAUSING PROBLEM TOO, PLS REALLY SOFT OUT WHY SUCH PROBLEM HAPPEN IN THIS LATEST V21 ??? WHAT FOR NOKIA ASK OUR USER TO UPGRADE ?

anybody suffering this annoying problem ? pls voice up pls....now i also don't know what to do...really sad...

N95 V21.0.016 Update - Calendar Error

Similar Messages

Maybe you are looking for