N95 will not restore backup after update to v30

have read numerous forums about similar problems however nothing about upgrade to v30 and nothing that would solve my problem...
Please help!
So... Ive updated the telephone from v20 to v30... tried to restore my backup and nothing. It shows as if it was restored but there is nothing on the phone...
Ive tried everything there was to try as far as I know or could have read...
... tried *#7370#
... tried nseries pc suite
... tried to restore content one by one
Absolutely nothing works!
There are all my job contacts in my contacts and messages and all my appointments in my calendar and since the computer Im using is new I have nothing on my Outlook yet...
PLEASE HELP! I´m loosing my mind right now!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

Unable to restore backup after updating iphone 4, because "not enough free space"

I updated my iphone 4 to v7 via itunes (v12), and in doing so, my camera roll was erased as were most of my calendar events. I am trying to restore the backup that I created just before updating, but I get an error message in itunes that says "itunes could not restore the iphone" because "not enough free space". There is 2.5gb free on my iphone, and I created the backup just before updating so there should be plenty of room. Does anyone know how to get the iphone to restore and/or how to put my pics & calendar back? itunes hangs up at the end while syncing too...

hello again, don't post twice the same question, it won't be answered faster.
see your previous thread: iphone 4 unable to restore backup after updating to v7

My ipad will not power on after update. I have tried connecting to computer which doesn't recognize it. I have pushed top and circle buttons at same time. It had a battery charge before it died. I tried to stop the upload and am afraid it 'crashed'

My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died. I tried to stop the upload midway and am afraid it 'crashed'

Try putting it into recovery mode.
Connect iPad to your computer via USB while it's turned on.
Open iTunes
Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
Power off the iPad completely (wait for the progress spinner to disappear).
Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
Click on the "Restore" button and the process will begin.

My ipod touch will not restore backup files, it gets to 4 mins then say error occurred (-1),I have restarted my pc but no joy.

My ipod touch will not restore backup files, it gets to 4 mins then say error occurred (-1),I have restarted my pc but no joy.

I would next try restoring from backup.

Iam unable to restore backup after updating ios

Hello friends iam unable to restore backup after updating ios to 6.1.3.plz help me how to restore backup iphone 4

Did you already try to connect in recovy mode and restore, as explained in this article?
http://support.apple.com/kb/HT1808

Tried to update to OS 5.0.1. It crashed my phone and now will not restore. Downloads update but then says server timed out? Help

Tried to update to OS 5.0.1. It crashed my phone and now will not restore. Downloads update but then says server timed out? Help

You are going to have to connect to the computer and restore. http://support.apple.com/kb/HT1808

My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.

Word will not open anymore after update

Word will not open anymore after update

Hold down the Shift key when launching Word.
If that fails, try deleting this file.
~/Library/Saved Application State/com.microsoft.Word.savedState
Log out under the Apple in the Menu bar.
Log In and launch Word.
Still failing...
If Word failed to launch in Guest, then you need to re-install Office.
Microsoft Office for Mac 2011 14.4.1 Update (If you have an early installer you'll first need to update to 14.1.0)
Microsoft Office for Mac 2011 14.4.2 Update (requires 14.1.0 to be installed)
Important to restart after each updater.

Unable To Restore backup after updating to OS 10.3.1.1565

Hi there...
i just updated my Q5 to os 10.3.1.1565
(Had an error with memory when trying to do OTA update , so i did a full backup on device via link , Factory Reset , then updated it )
Then i tried to do a full restore , but it wont restore it
saying:
"Restore was canceled"
"The Operation was canceled, and some items were not restored."
is there anyway to restore the backup without reverting to an older os ?
Really could use some help or info's ...
much thanks in advance

Hi and Welcome to the Community!
Refer:
Article ID: KB36134 BlackBerry Link fails when attempting to restore a backup file and displays "Restore was cancelled. The operation was cancelled and some items were not restored.
However, given your description, I suspect something else. It has been reported from time to time that if you update too far in the OS versions that the restore will fail. Usually, though, this is in downgrading the OS...not updating...but it has happened (as per reports here) more than once in the way you describe.
Sadly, the "fix" depends on your situation. If you have all of your contacts, calendar, etc. on a compatible email server (e.g., Outlook.com), then simply reintegrate that account and the data will come back from the server. Or, if you were using LINK to synchronize to desktop Outlook then simply re-establish that. But, if you were taking the most risky method of using these on the device truly "stand alone", then your recovery is much more difficult. Plus, if you had other data (photos, videos, documents, etc.) that you were storing in Device Memory instead of on the SD card, then you may have to also do this.
If indeed you need to do the most challenging method, then it is thus:
Load your prior OS to your device...either via LINK (if it offers it) or via AutoLoader
Restore your data to your device
Purchase, install, and use Ultimate Backup to backup your calendar, contacts, etc. to your SD card
If you also have data in Device Memory (photos, etc.), then copy those as well to the SD card
Load the more recent OS to your device
Restore via Ultimate Backup from your SD card, as well as continue to store your photos and such there (to avoid this problem in the future regarding photos, documents, etc.)
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Time Machine will not back up after updating from 10.2 to 10.3

This just started yesterday so it has to be due to the update.
The following error message is given in the Time Machine settings:
The backup disk needs 257.55 GB for the backup but only 234.84 GB are available. Select a larger backup disk or make the backup smaller by excluding files.
250 free gigs on my backup disk but it can't make the backup? What? I currently have 900GB filled on my regular hard drive but I don't back up all of it. I exclude about 150GB from backup, so the machine estimates the total backup size to be 759GB. The backup drive already has 764GB filled, so I'm not sure where all this extra info is coming from. Haven't downloaded anything besides the new update.
Any ideas on what to do?

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
tmutil compare | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take several minutes to run. Wait for a new line ending in a dollar sign ($) to appear below what you entered.
A TextEdit window will open with the output of the command. Don't post all the output; just read it yourself. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

Iphone 5s will not send imessages after update

I updated my iPhone 5s to the newest IOS 7.1.2 and since that time it will not send imessages to anyone. I have powered off and on. I have reset the settings. I have checked to make sure that messaging is on. I have turned off messaging and then turned it back on. It was working just fine prior to the update. Anyone know how to fix this??
Thanks!!

Hello marybethcolc,
It sounds like you are unable to send iMessages after a recent update despite some great troubleshooting. I would use the following article as a guide to help you get that issue resolved, named:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Ipad mini will not remember passwords after update to iOS 8.0.2

My ipad used to remember forum user names/passwords but after updating first to ios 8 then to iso 8.02 it no longer remembers them, I have gone to Safari then passwords/auto fill and all of the green sliders are activated.
I tried login on then creating a new short cut but it does not help.....can anyone help?
Thanks.

Hello F4DHL1,
The article linked below details a number of helpful steps that can assist with restoring full functionality to your iPad's cellular data connection.
Get help with the cellular data connection on your iPad (Wi-Fi + Cellular Model)
http://support.apple.com/kb/TS4249
Cheers,
Allen

IPad 2 will not turn on after Update 6.1

I've read a number of discussions on the issue, but have yet to find a solution. I am using an iPad 2 (version A1395).
I tried updating to iOS 6.1 over WiFi. It seemed to download well enough, but when it got to the installation, it kind of fried my iPad. It will not turn on. I have tried all of the following:
1. Pressed the Home button (also tried holding it down).
2. Pressed the Power/Sleep button (also tried holding it down).
3. Pressed both at the same time (also tried holding it down).
4. Held the Home button while connecting to a PC via USB.
5. Held the Power/Sleep button while connecting to a PC via USB.
The only action that gets any response from the iPad is plugging it into power brick via USB. The Apple logo will appear briefly, indicating that it's powering on, and then it shows the "Connect to iTunes" graphic. Nothing more. If I unplug from the power brick, the screen turns off. Plugging it into a computer after that does nothing.
Any ideas?

I had this same problem with my iPad 3 (Verizon 4G, wi-fi) when I did IOS 6 update wirelessly last night. I could only leave one device at a time attached to my computer, so I left my iPhone 4S plugged in to the computer and updated to IOS 6 via iTunes. The iPad was updated over my home wi-fi network and plugged in to the charger. I was prompted to enter my Apple ID & Password on both devices and appeared to have successfully upgraded to IOS 6 on both devices. I even was browsing in briefly in the new Safari on the iPad to make sure it was working, then left it to finish charging overnight.
I left both plugged in overnight and when I woke up this morning, the iPhone was fine and the iPad won't turn on. I tried the remedy here by holding down the power & the circle button in front for 2 mins and still didn't go on. Please help!

Ipod will not restore crashed during update

ipod crashed on update and will not work. it said to do a restore but I have tryed 2 times and both times the restore didn't work

I just did the install of 2.0.02 last and I had one dickens of a time restoring my library. Here is what happened to me. Right before doing the update it tells you that all of your music, videos etc.. will be removed from the Ipod Touch once the update is done installing. So I found a DVD and burned my library to it. Then I went ahead and did the install. It clean my Ipod Touch clean, but my iTunes library was still intact so I thought all will have to do is resync it but that didn't work. I tried and tried. I disconnected my external HD. Oh yeah by the way this is a new computer that I just bought and last night was the first time I used iTunes on it so I had to populate my library using iGadget.
Anyway, I realized that I didn't have manually manage my iTunes library unchecked I unchecked it and it began to sync the back up copy I had of my library. Did either of you back up your library before installing 2.02? Do you have a place where most of your music is stored outside of iTunes? You cannot have Manually manage library checked it won't restore if you do. Be aware though 96% of my cover art was gone with this restore. How annoying. I don't know if this is the information you were looking for but I hope I have been able to shed some light on the issue.

My iPod will NOT restore, even after 100 attempts!

So here's how it goes: I have attempted to restore my iPod literally 100 times (I have counted), and each time, only the Apple logo shows up. The actual iPod screen itself does NOT light up, and no matter how long I leave my iPod plugged into my USB ports (I have tried all three) on my laptop, nothing happens. Meanwhile, if I unplug my iPod from my laptop and then plug it back in, iTunes will recognize that my iPod is in need of restoration, and then it begins all over again! PLEASE HELP!!

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

N95 will not restore backup after update to v30

Similar Messages

Maybe you are looking for