N97 mini message "packet data: packet data connect...

hi
I got a new nokia N97 mini a couple of months ago, it's on a plan with optus, and it's been working fine until a few days ago it keeps flashing this message 'packet data: packet data connection not available' and it won't let me access the web, or even send messages I've tried resetting it but no luck please help me!

Contact you Operater to confirm that the Packet Data Plan isn't deactivated.. If its active..request them to send the settings once again.. Normally these are sent thru' SMS.. When you receive..first delete all the access points from your phone.. then open the SMS and select..'SAVE'..Now try..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

N97 mini: messages

Hi,
I have a very annoying problem with my new Nokia N97 mini.
When I get a message from someone, my phone is only showing me the number of this person instead of showing me the name of the person. This is very annoying because I don't know all those numbers...
Can please anyone help me? Because a lot of stores where I told my story couldn't help me.
Thanks

It will be multiple entries, you either have two manes attached to one number, or in settings in contacts you are either using multiple memories or sim memory, you need to set to Phone memory as source for caller ID to work. Best way to check for multiple entries is to go through your contacts in Ovi Suite, many posts on this subject, it's always multiple entry !!
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

IPad mini messaging saying check your network connection?

I have logged into imessage using the icloud email and type the password. But then it says- could not sign In please check your network connection.
But the wifi is fully working.
I'm very confused. HELP!

Hey Barber0710,
These are the recommended troubleshooting steps when, if trying to activate iMessage, you encounter the error message "Could not sign in, please check your network connection and try again" when signing in to your Apple ID:
Update to the latest version of iOS.
Verify that you have a data connection by going to www.apple.com in Safari. You can complete Apple ID activation using Wi-Fi or a cellular data connection. If you need help connecting to Wi-Fi, follow these steps.
If you're using Wi-Fi, make sure that your local Wi-Fi network is using the recommended Wi-Fi settings.
Sign in to your account and ensure that the primary email address and alternate e-mail addresses have been verified. If verification is pending, follow the instructions in the email Apple sent to that email address to complete verification. Or remove the e-mail addresses from the account.
If your Apple ID isn't an email address, you can change it. The Apple ID that you're using to activate FaceTime or iMessage must be an email address. Find more information on how to change your Apple ID.
Tap Settings > General > Date & Time. Make sure that your iPhone is set to the correct time zone. If Set Automatically is on but the wrong time zone appears, turn Set Automatically off and choose the correct time zone, date, and time.
Enable iMessage and FaceTime while connected to a different Wi-Fi network (in a different location) if a cellular data connection is not available.
You can see that you've activated FaceTime and iMessage with your Apple ID by following these steps.
Tap Settings > FaceTime > You can be reached by FaceTime at:
Tap Settings > Messages > Send & Receive > You can be reached by iMessage at:
via: iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
I would give all those steps a shot and see if your issue is resolved.
Welcome to Apple Support Communities!
Regards,
Delgadoh

N97 mini: questions on emails

Hi all,
I have a few questions: what sort of email client does the N97 mini come with? Does it connect to email servers via IMAP idle? More specifically:
1) if I delete an email from my Nokia, will it be deleted from the server, as well?
2) when I send an email from my Nokia, is it possible to upload that email to the 'Sent' folder of my email server?
My email server supports POP, IMAP and IMAP idle - it's not an Exchange server.
With the E71, the only way I found to do the two things above was with Profimail, which is a great software but doesn't integrate in the home screen.
Thanks!

krizanand wrote:
1. You have an option in the User settings of your mailbox on the phone, from your inbox > options > e-mail settings > User settings > E-mail deletion select Phone and server.
2. It automatically refelects in the sent items folder of the mail server also its stored in the sent items on the phone.
Thanks a lot! So it seems there isn't much of a point in installing a third party email client like Profimail any more...
Can I ask a few more details, if you don't mind?
Does Nokia messaging work over wi fi, too? For example, if I connect to a wireless router, would emails work normally, like for the E71, for instance?
Does Nokia messaging connect via imap idle only? Or does Nokia send some sort of hidden sms to the phone when it receives an email, prompting it to connect to the server?
If I delete an email when there's no signal, it will be deleted from the server as soon as the phone picks up a signal again, right?

N97 mini video out

Hi, i was trying to view a video recorded in a n97 mini in a tv screen. i connected a video out that came with an older n85 and played the video on the phone. the video played on the phone but not on the tv. the manual says i can output the video like this, it also said that while reproducing the video, it would appear on the tv set but not on the phone, and in my case, it was playing in the phone but not on the tv. as i mentioned, i was using a cable for video out with 3 exits that came with an n85, when i attach it the phone recognices it as a sound cable, or it does not say anything about video anyway (but the sound does not play in the tv set anyway), and i do not see, not in the tv and video section, neither in the 'accesories->video out' config anything to say, if i attach a cable in the av hole, is supposed to be a video cable, so i dont know if is something i passed by in the configuration of the phone, or is there a video out cable different than the one i am using that i am supposed to use, or what. yes i am sure the tv had the right imput selection, i even tried each option in the tv. any pointers?, tnx

You are obviously using the wrong cable. If the phone says it things you attached an audio cable, it does not recognize it as a video cable, so why should it try to send video out?
Get the right cable for a N97 (mini).

N97 mini constant pop-up msg "Packet data: Packet ...

Every 2-3 seconds, my phone displays this message "Packet data: Packet data not available. Check network services" and it prevents me from doing anything on my phone without being interrupted. There are some times of the day when this messages does not show up at all but I'm not quite sure on the reason for this. I've tried almost everything to prevent the packet data messages from continuously popping up & I really need help with this. I have recently got my phone (about 2 days ago) & I don't want this to be a reoccurring thing on my new phone.

In Connectivity settings...Under Administrative settings-->Packet Data Connection.. set as 'When Needed'..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Data packet connection received

On a fairly regular basis, once an hour approx, my N86 beeps and a message appears on the screen stating that a " data packet connection received". This also happens when I'm on a call and beeps in my ear.
This is only a minor annoyance but an annoyance nevertheless. Any idea what this is and what I can do about it?
Solved!
Go to Solution.

also have this problem with my N5800. I have noticed on my phone bill that I have connected to the internet every 30 min.
When I hold the menu button to see what apps are active I only ever see the "home" and "menu" logo. In my Admin settings>Packet data>Packet data connection the only options are "When needed or when available"
How is the best way to find out what app is connecting to the internet and sky rocketing my bills!!
Nokia 5800 XpressMusic / FW 50.0.005

N97 mini data connection is always on?

Why is the data connection always on,on my n97 mini phone this kills my battery life? I've been playing with it for 2 days now trying to figure out what's making it stay on all the time but I can't find the source can you please help? THANKS

hi this will help
Internet communication settingsSelect Menu > Settings and Connectivity > Admin.settings > Net settingspacket data select when needed
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

N97 Mini works slowly with data!

I'm using N97 Mini and I feel that this model working very hard at:
- Delete data such as: photo, music, video... special when I select more than one file. It's even hardly to open Options menu. After deleting, it still shows files that i've deleted until one minute later.
- The Ovi suite works hard so. It works incorrect when sync photos. There're 2.000 photos in my library and only 800 photos in my phone (synced Photos ), and more. I tried to copy new files to my phone using "copy to the device" action. It takes an evening to do this, and when i browse photos, i realize there's duplicated files ( 2, 3, even 4 same files).
That's all slow things I realized until now.

Hi, I find aeiting files easier using computer connected via usb in mass storage, go to 'my computer, open E or F drive and add, remove or edit files there !
Just remember to set memory in use for messages back to E when you've disconnected phone as it resorts to C after usb connection.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Arrived in BW Processing: Data packet not yet processed

Hello Gurus,
Data is being loaded from export datasource (8RL*****) ti 2 data targets
The overall QM status is red (says processing is overdue)
The details tab shows
Extraction: Error occurred
Transfer(IDoc and TRFC): Error occurred
Processing (Data packet): Error occurred
   -- Transfer rule: Error occurred
     Bewegungsdaten received.Processing being started
     Message missing(35676 records) : Transfer rule finished
Update rule (0 records):Missing messages
Update(0 new/0 changed): Missing message
Processing end: Missing message
I checked the LUW in SM58 but didnt find anything.
I checked infosource (PSA) - one request is in RED, but when i check the data in PSA there are no errors.
What should I do in this case?
What might be the excat error.
Kindly inform.
Regards,
NIKEKAB

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks
Reddy

Repeater does not forward data packets

Hello all!
I have following setup:
A root access-point ap1, model AIR-AP1231G-E-K9 with IOS 12.3(8)JEE, is configured with one SSID on VLAN 1 (native) and working fine.
Now I would like to add a 2nd access-point ap2 of the same model with the same IOS version as a repeater to extend the WLAN coverage of the overall network.
I managed to configure the 2nd access-point successfully as repeater (same SSID settings, infrastructure ssid set, parent 1 mac-address set) and it associates successfully with the main root access-point.
Now I observe following effect: As soon I leave the coverage area of the first AP and enter the area of the repeater, the client (iPhone, Laptop or any other WLAN device) associates successfully to the repeater (confirmed with "show dot11 ass" and due to the log entries of the repeater) but the data packets are not forwarded to the main access-point. There is no IP connectivity to the root AP or internet anymore.
Another example which might lead to the solution is following observation:
I have my laptop connected to the wireless network with two console sessions open. In one I run a ping to the first AP, ap1 (10.200.3.5) and in the other console I run a ping to the repeater ap2 (10.200.3.6). Both access-points reply.
Now if I enter the coverage area of the repeater, my laptop gets associated to it and the ping to the first AP ap1 times out.
Again, it looks like that the repeater denies to forward traffic to the main root AP.
I have no clue why this happens, nor are there any log messages available which might explain this issue.
I hope someone can help me finding the problem.
The configuration of the working root access-point ap1 as the repeater ap2 is attached.
Thank you!
Best regards,
Bernhard

You have configured sub-interface on radio interface & not in ethernet interface at Root AP end. change the config like below & see.
dot11 ssid Internet Las 3 Marias
   vlan 1
   authentication open
   authentication key-management wpa
   guest-mode
   infrastructure-ssid
   wpa-psk ascii 7 xxxx
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm tkip
encryption mode ciphers aes-ccm tkip
bridge-group 1
ssid Internet Las 3 Marias
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2412
station-role root access-point
world-mode dot11d country-code US both
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
Here is a reference post for a similar setup (vlan 110 is native vlan though)
http://mrncciew.com/2013/01/20/autonomous-ap-repeater/
Also suggest to configure WPA2/AES (instead of WPA/TKIP), if it is supporting in this AP model, command syntax is like below.
dot11 ssid xx
authentication key-management wpa version 2
int d0
encryption mode ciphers aes-ccm
Let us know how it goes
HTH
Rasika
**** Pls rate all useful responses ****

Data recovery from N97 mini

Hei all,
I’m using Nokia N97 mini.
Along with Phone memory and Mass memory, I inserted one 1GB memory card also.
Yesterday, I was trying to copy some files in ‘mass storage’ mode via cable into that 1GB card. While copying, some files could not be copied and I got error message.
So, I aborted the whole operation. From then, I couldn’t find my personal data from the Mass memory.
Along with some system folders on the mass memory, I have one folder ‘My data’ in which I save all my data.
I’m unable to see the ‘My data’ folder.
It shows that ~2GB memory is being used on mass memory. If I check the size of all folders that i can see, its only 45MB.
So, my folder is occupying space. But, i’m unable to see that.
Please help me in recovering my data.
-Babloo

Download and install an app from www.ovi.com called y-browser and see if that allows you to see your folder.

Need help in logging JTDS data packets

Hi All,
I m having web application which uses SQL Server database.
I have to find out some problems in database connection for that there is need to log the jtds data packets.
I have tried to use class net.sourceforge.jtds.jdbc.TdsCore but in constructor of TdsCore class there are two parameters needed one is ConnectionJDBC2 and another is SQLDiagnostic.
I have tried a lot but it did not allow me to import class *SQLDiagnostic*.
I need help in logging JTDS data packets. If there are any other ways or any body having any idea about logging JTDS data packets/SQLDiagnostic.
Please reply it is urgent...!!
Thanks in advance......!!

if you want to use log4j then,
in your project create a file called log4j.properties and add this
# Set root logger level to INFO and its only appender to ConsoleOut.
log4j.rootLogger=INFO,ConsoleOut
# ConsoleOut is set to be a ConsoleAppender.
log4j.appender.ConsoleOut=org.apache.log4j.ConsoleAppender
# ConsoleOut uses PatternLayout.
log4j.appender.ConsoleOut.layout=org.apache.log4j.PatternLayout
log4j.appender.ConsoleOut.layout.ConversionPattern=%-5p: [%d] %c{1} - %m%n
log4j.logger.org.apache.jsp=DEBUG
#Addon for
com.sun.faces.level=FINEGo to your class and add this line
private static final Logger logger = Logger.getLogger("classname");and then you can use
logger.info();
logger.error();
methods

Maximum size of a data packet

The maximum size of data packet set in configuration is 25MB.
I want to change the size of data packet as 50 MB. I don't want to change it globally(in SPRO). I want to change it only for specific info-package.
But in info-package system does not allow to change the packet size more than 25MB.
Please suggest the way.
Regards,
Dheeraj

Hi..
MAXSIZE = Maximum size of an individual data packet in KB.
The individual records are sent in packages of varying sizes in the data transfer to the Business In-formation Warehouse. Using these parameters you determine the maximum size of such a package and therefore how much of the main memory may be used for the creation of the data package. SAP recommends a data package size between 10 and 50 MB.
https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=cube+size&objid=c4&daterange=all&numresults=15
MAXLINES = Upper-limit for the number of records per data packet
The default setting is 'Max. lines' = 100000
The maximum main memory space requirement per data packet is around
memory requirement = 2 * 'Max. lines' * 1000 Byte,
meaning 200 MByte with the default setting
3 THE FORMULA FOR CALCULATING NUMBER OF RECORDS
The formula for calculating the number of records in a Data Packet is:
packet size = MAXSIZE * 1000 / transfer structure size (ABAP Length)
 but not more than MAXLINES.
eg. if MAXLINES < than the result of the formula, then MAXLINES size is transferred into BW.
The size of the Data Packet is the lowest of MAXSIZE * 1000 / transfer structure size (ABAP Length) or MAXLINES.
Message was edited by:
 search

Data packet not yet processing in ODS load??

Hi all,
I got an error when I loaded data from IS to the ODS. Can someone let me know why and how to resolve it. Thank you in advance.
Here is the error message in the monitor:
Warning: data packet 1 & 2 arrived BW; processing: data packet not yet processing.
(No data packet numbers could be determined for request REQU_77H7ERP54VXW5PZZP5J6DYKP7)
Processing end:
transfer rules (0 record): missing message
Update PSA (0 record): messing messages
Update rules (0 record): messging messages

John,
I dont think its space problem.In st22 go with detail note.
What happend, how to correct it.Will help you to solve the problem.
Check this note 613440 also.
Note : 647125
Symptom
A DYNPRO_FIELD_CONVERSION dump occurs on screen 450 of the RSM1 function group (saplrsm1).
Other terms
DYNPRO_FIELD_CONVERSION, 450, SAPLRSM1
Reason and Prerequisites
This is caused by a program error.
The screen contains unused, hidden fields/screen elements that are too small for the screen check that was intensified with the current Basis patch (kernel patch 880). These fields originate in the 4.0B period of BW 1.0 and are never used.
Solution
Depending on your BW system release, you must solve the problem as follows:
BW 3.0B
 ImportSupport Package 14 for 3.0B (BW 3.0B Patch 14 or SAPKW30B14) into your BW system. This Support Package will be available when note 571695 with the short text,"SAPBWNews BW 3.0B Support Package 14", which describes this Support Package in more detail, is released for customers.
BW 3.1 Content
 ImportSupport Package 8 for 3.1 Content (BW 3.10 Patch 08 or SAPKW31008) into your BW system.This Support Package will be availablewhen note 571743 with the short text, "SAPBWNews BW 3.1 Content Support Package 08", is released for customers.
The dump occurs with the invisible G_NEW_DATUM date field on the bottom right of the screen, which is only 1 byte long and can be deleted.
You can delete the following unused fields/screen elements:
%A_G_NEW_NOW Selectionfield group
G_NEW_ZEIT Input/output field
G_NEW_UNAME Input/output field
G_NEW_DATUM Input/output field
%#AUTOTEXT021 Text field
G_NEW_NOW Selection button
G_NEW_BATCH Selection button
You can delete these fields/screen elements because they are not used anywhere.
This deletion does not cause any problems.
After you delete the fields/screen elements, you must also delete the following rows in the flow logic in screen 450:
FIELD G_NEW_DATUM MODULE DOKU_NEW_DATUM.
FIELD G_NEW_ZEIT MODULE DOKU_NEW_ZEIT.
The function group is then syntactically correct.
Unfortunately, we cannot provide an advance correction.
The aforementioned notes may already be available to provide information in advance of the Support Package release.However, the short text will still contains the words "preliminary version" in this case.
For more information on BW Support Packages, see note 110934.
Thanks
Ram

N97 mini message "packet data: packet data connect...

Similar Messages

Maybe you are looking for