N97 Mini works slowly with data!

I'm using N97 Mini and I feel that this model working very hard at:
- Delete data such as: photo, music, video... special when I select more than one file. It's even hardly to open Options menu. After deleting, it still shows files that i've deleted until one minute later.
- The Ovi suite works hard so. It works incorrect when sync photos. There're 2.000 photos in my library and only 800 photos in my phone (synced Photos ), and more. I tried to copy new files to my phone using "copy to the device" action. It takes an evening to do this, and when i browse photos, i realize there's duplicated files ( 2, 3, even 4 same files).
That's all slow things I realized until now.

Hi, I find aeiting files easier using computer connected via usb in mass storage, go to 'my computer, open E or F drive and add, remove or edit files there !
Just remember to set memory in use for messages back to E when you've disconnected phone as it resorts to C after usb connection.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

N97 Mini - problem autolock with security code

I bought my N97 Mini last week. It works perfectly except when I activate autolock with securitycode, the phone refuses to react, when the autolock is activated of course. Only when I remove the battery I can reboot my phone.
I've contacted both the after sales service of the store where I've bought my phone as Nokia Careline.
Nokia referred me to a Nokia Care Point and the after sales service of the store proposed to give me a brend new phone.
I've chosen for the new phone, but the problem remains the same (sometimes it works, but sometimes it doens't).
I have the newest software (V10.0.020 on date 14-10-09), edited version 10.0.020.C01.01 (via *#0000#).
I can't continue te be given new phones that don't work properly.
What should/can I do more?
Thank you for your help.

and problem
when phone startup and not enter lock code the screen is off when used unlock key to open screen not open screen

N97 mini not synching with Nokia Ovi Suite 2.2.1.2...

I've had my N97 mini for a few days and I was so hoping that it would be a better experience than the Sony Ericsson I had. Seems not.
Running Win7 32-bit, NOS 2.2.1.23, all software updated on PC and phone, but I just cannot get the phone to sync with the PC. When I connect the phone to the PC with the USB, it does its recognition, and all the Sync button light up and become live. But clicking them does nada.
The strange thing is that it has worked, when I first installed it on the PC.
Also, PC Suite does not start up when I connect the phone to my PC even though I've told PC Suite to start up when the phone is connected. What's going on?
And one last rant... why on earth is there no timed auto-sync facility on PC Suite?? Everytime I want to sync, I have to press buttons. Even my dumb Sony Ericsson software could do that!
Cheers,
Mart

Could you please follow this?
1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
2. Delete the files from here If anything is there
C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
C:\Documents and Settings\user\Local Settings\Application Data\Nokia
C:\Documents and Settings\All Users\Application Data\OviInstallerCache
3. Please search and download MSI clean up utility from microsoft website
Once installed please select the programs related to Nokia and click remove.
Restart Computer.
Then download from microsoft website and install Windows Installer, so that the installer is upto date.
4. Restart the PC
5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/nokia-ovi-suite
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

N97 mini not BT with anything

OK i've just upgraded from N95 8gb to N97 mini. Great I thought I'll have no issues with paring and making calls with JVC car kit. Now my N95 worked perfectly with no dropped calls and it could stream audio and video to the JVC unit all day long with no issues...
I have a few questions.
The JVC has:-
HFP (hands free profile) 1.5
OPP (object push profile) 1.1
A2DP (advanced audio distribution profile) 1.2
AVRCP (audio/video remote control profile) 1.3
What has changed in the N97 from the N95 that none of this no longer works and more importantly how can I resolve this with phone software updates?? Is there anywhere on the planet that can make software's/apps to solve these gripes until BT is standardized??
Also I'm not interested in contacting Nokia as they'll do noting for me but when could I find the MD's email address as this option usually works alot better and faster from experience..

It would be nice to know if this phone works Bt with anything. I coonot connect to my HP notebook either!!! This is something never ever happened..tried USB, it works occasionally.
To expensive phone nort worth it

N97 Mini: Compatibility issues with Original N97 W...

As of late, I've been trying to load up my N97 Mini with some new widgets. To my dismay, many of the apps I have found in Ovi will NOT work with the N97 Mini: 90% of the widgets won't be available when I search through the phone's client or through Ovi's online portion. I even tried to change my mobile device to an original N97 in my account settings (of course, scores more widgets show up in searches) and send them to the phone via SMS, but it still shows the message that my device is not compatible.
What gives? The phones are almost exactly the same! Why can I not see/download the same app and widgets?

carman58 wrote:
Which apps do you want ? Ovi is not the only source. Check out Daily Mobile Forum, Nokiausers and GetJar, for a start and contact Ovi to question compatibility. Also can I suggest Googling- Opera mini 5 Beta 2 and Snaptu, both useful to have as shortcuts on your homescreen. Hope this helps and good luck.
Oh, I'm well aware Ovi isn't the only place, but it's annoying to read about a specific widget only to find it won't work with my device. I have stuff from all over the place, but I wouldn't mind a download from Ovi every once and a while
Edit: To explicate my point, I simply don't have the options that the N97 does in terms of widgets. It's rather annoying, especially considering the similar nature of the Mini and the N97.
Message Edited by newtype2011 on 29-Dec-2009 01:15 AM

N97 MINI - Issues connecting with Bury CC9060 Cark...

Hi,
I have an issue connecting my N97 mini with Bury CC9060 car kit. I am able to pair the device with the Car kit, but after a minute there will be a message pop-up in the car kit display says, "disconnected" (The connection with the Car kit & my Nokia N97 mini is lost). Still on my Nokia N97-mini display I can see the car symbol (as if like it is connected with the Car kit).
But now if I am receiving or making a call, I am not able to hear the audio (both I/c and o/g) either from the device or from the car kit. The only way is to switch off and on my N97 mini (reboot) to get the audio via my phone.Here I would like to know if there any thing can be done from to solve this issue (Is there any compatibility issues with Nokia N97 and Bury CC9060?)
Note: Bury 9060 is updated with the latest SW and my device also is having the latest SW (10.0.020)
Please advice,

Hi All
I am having similar problems with my E72 phone. It disonnects and reconnects from the Bury every minute or so and causes the Bury to reboot sometimes. If I am in a call I get a loud squeal and then it drops. When I first had the E72 it worked ok for the first few weeks and then started having the issues. Then the phone was replaced due to an upgrade problem and the new phone was ok for a couple of weeks but has now started doing it again. I have tested the Bury with other phones and all is ok. Just about to upgrade the Bury and see if that makes a difference. Its very distracting when you are driving so i have to deselect the phone.

Working offline with data from Access 2010 web database

Hello all,
I have an Access 2010 web database that I have published to a SharePoint site. Users currently work with the data via one of several Access 2010 front end applications that simply have linked tables and client queires, forms and reports. On a couple
of occasions, we have had issues with our SharePoint site that have left users unable to access the data. A couple of times it was due to our site collection suddenly and inexplicably becoming read only and the last time (while I was on vacation, of course)
due to some license changes my folks were unable to access the site.
I'm getting ready to go on vacation again. What i would like to do is have a sort of emergency back up plan should things go awry again while I'm gone.
What I envision is a back up database that has actual data tables, rather than simply linked lists, that I can sync with my SharePoint lists on a regular basis. That way, should the SharePoint lists become inaccessible, users could continue to work with
the data offline and any changes can be synced once a connection is restored.
I have read through
this article, but in each scenario I was unable to actually open tables to work with the data once offline. Is this a situation where I should simply have folks work offline with a local copy containing all of the data and then republish? Or, is there
a way to simply sync? Any thoughts or suggestions would be appreciated. I'm really hoping to leave my laptop at home on this next trip.
Thanks,
Greg

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay, appreciate your patience.
Thanks
Daniel Yang
TechNet Community Support

Mac mini works strange with Xerox XA7-19i LCD

Hello!
I bought a brand new Mac mini and connected it to my Xerox XA7-19i LCD which works fine with my PC. It has cable with DVI connector, and cable is not removable (other side is built-in in LCD).
After I power-on Mac LCD just blinks and after few seconds monitor reports "No signal". After pluging-out and then pluging-in DVI cable, I get the picture. And I have to repeat that every time. I have also BootCamp with WinXP which boots just fine without re-pluging the cables. MacOSX also doesn't detect refresh rate of this LCD. In MacOSX it reports only 60Hz, while in WinXP it works at 75Hz.
I borrowed Dell LCD with VGA cable and it works fine in MacOSX and WinXP, so I'm pretty sure that the problem is about properly detecting Xerox LCD while booting MacOSX.
Does anybody know any drivers or something like that for Xerox LCD for MacOSX?
Mac mini Mac OS X (10.4.7) 1,66 Intel Core duo, 1GB RAM/100GB HDD/SD/BT/AP

Hello!
I found a "solution". It is not what a wanted but it is as closest I can get.
If I don't turn on monitor before I turn on Mac everything goes well.
So when I'm turning on Mac a wait for 15sec before I turn on the monitor. After logging, I change resolution to 1280x1024@76. Thing that I have to do before tuning off Mac mini is to set back resolution to 1024x768 or 1024x820 and turn off the monitor (don't leave monitor in standby).
If I want to change boot disk at booting time I have a problem, because after holding Option key it boots up in BootCamp and waits for boot disk selection. If I turn on monitor after 15sec the screen is black. Solution for this is that BootCamp always selects first MacOSX volume, so if I want to boot in MacOSX I have to just press Enter, if I want to boot WinXP I have to press Tab then Enter.
That is the only solution in which I don't have to plug out and back in DVI cable.
Is it possible to make some script which will change automatically resolutions on logging in and out?
Thanks!
Marko

SQL Developer: Right-click format doesn't work right with DATE datatype

Hi All!
Currently I'm using version SQL Developer Version 3.1.05.
Got a question regarding the 'auto-format' of syntax whenever writing in the code editor.
If you take this snippet of code and drop it into a worksheet, then highlight it, right click the mouse, then select "format" it's like it fails to add the proper spacing when it runs into the DATE datatype. I looked all through the : preferences > database > sql formatter > oracle formatting > edit and couldn't find anything regarding the formatting with date types.
Am I looking in the wrong area?? Is this a known bug? Having trouble searching for this exact issue too. I LOVE the format feature, but I hate having to go to each date type and manually spacing it out to make everything look 'clean'. I'm picky I guess :P I can live with it but figured I'd ask.
type TEMP_REC
IS
record
ORG_CODE VARCHAR2(15),
PROJECT VARCHAR2(15),
WBS VARCHAR2(30),
SERIAL_NO VARCHAR2(30),
QTY_ORDERED NUMBER,
QTY_SCRAPPED NUMBER,
QTY_COMPLETE NUMBER,
BOM_ID NUMBER,
REQUEST_DATE DATE,
CREATE_DATE DATE,
REL_DATE DATE,
START_DATE DATE,
NEED_DATE DATE,
DUE_DATE DATE,
COMPLETE_DATE DATE,
CREATED_BY VARCHAR2(30),
MODIFIED_BY VARCHAR2(30),
MODIFY_DATE DATE,
EST_HOURS NUMBER(6,2),
ACT_HOURS NUMBER(6,2),
BAD_COMMENTS VARCHAR2(1000) );

Hello,
I put 3.1.07 as you'd suggested. Seems the problem is still occuring for me... probably a user preference though ;)
Open a new worksheet and drop this in, highlight everything, right-click and choose "format". All the keywords (varchar2, number, etc) should align on themselves making it look nice. I have mine set up to line-break after a comma. (I can't get it to format properly as I type it here onto the forums, so added a bunch of spaces to try to mimic it in this view)
type TEMP_REC
IS
record
LEAD_TIME NUMBER(5,0),
SCRAP_PERCENT NUMBER,
CREATED_BY VARCHAR2(30),
MODIFIED_BY VARCHAR2(30),
OPER_SEQ VARCHAR2(6),
REF_NO VARCHAR2(2000),
COMMENTS VARCHAR2(2000),
BOM_FLAGS VARCHAR2(100),
BOM_ATTR1 VARCHAR2(30),
BOM_ATTR2 VARCHAR2(30),
BOM_ATTR3 VARCHAR2(30),
BOM_AMT1 NUMBER,
BOM_AMT2 NUMBER,
BAD_COMMENTS VARCHAR2(1000) );
Now, let's add another field in there, but this time a date/timestamp datatype. If you format it like this you will see that the keywords sort of 'reset' their position after it encounters a date/timestamp datatype. The date type doesn't align properly with the others.
type TEMP_REC
IS
record
LEAD_TIME NUMBER(5,0),
SCRAP_PERCENT NUMBER,
CREATED_BY VARCHAR2(30),
MODIFIED_BY VARCHAR2(30),
OPER_SEQ VARCHAR2(6),
REF_NO VARCHAR2(2000),
test DATE,
COMMENTS VARCHAR2(2000),
BOM_FLAGS VARCHAR2(100),
BOM_ATTR1 VARCHAR2(30),
BOM_ATTR2 VARCHAR2(30),
BOM_ATTR3 VARCHAR2(30),
BOM_AMT1 NUMBER,
BOM_AMT2 NUMBER,
BAD_COMMENTS VARCHAR2(1000) );
Might post a picture next time if that still isn't clear, though I konw folks are leary against clicking links to see screenshots. Might you know what I'm doing wrong here?

Does the Mac Mini work well with a Sony 50" SXRD HDTV?

I would like to purchase a Mac Mini and use it as a home theatre PC for my tv. I have a Sony 50" SXRD Grand WEGA Model # KDS-R50XBR1 tv. I will connect the Mac Mini to the tv via a DVI-to-HDMI cable. I want to make sure the Mac Mini can support this size screen at full native resolution which is 1920x1080. Any help, comments, or suggestions will be very helpful!
Thanks.
Home Built Windows XP

jayschr
Thank you for posting on this specific topic. The combination of a Sony KDS-R50XBR1 & a Mac Mini is a keen interest & current distraction in my life.
To this point, I can confirm that out of the box the Mini will reliably support a max 16:9 resolution of 1280x720, when connected to this TV via DVI-to-HDMI, albeit with over-scan (all edges off screen by a distracting degree). Display quality at this resolution is clear/readable (although some text may have some minor distortion or artifacts). Alternatively, connecting via DVI-to-VGA (PC 8) provides a crisper display, however (confirming pg 100 in the tv's manual) the Sony limits to the same 1280x720 resolution. Via this input the image has under-scan (black bands [letter & pillar box) all edges ~2"). Obviously, given the published specs of both devices, this is sub-optimal. That unfortunately is the straight forward answer to your question.
This lack of out-of-the-box native compatibility is not unique to the XBR. I have confidence that those more qualified than me, may be able to prescribe a pixel for pixel solution/work around. Throughout this forum, many informative posts have been generously/gratiously contributed by those in support of Mac Mini/HDTV harmony, quite often leading to success.
Significant among these have been contributors such as BSteely. I am both encouraged to see that BSteely has replied to your post, and concerned by the words of caution. I'm hopeful that this thread will continue to develop, ultimately leading to an optimal solution for this pairing.
There are many indications that a full native resolution of 1920x1080 should be possible. The Mini's display settings will recognize this particular Sony and register 1920x1080 (interlaced) as an example. However selecting this will cause the display to go black. This apparently is an out of the box limitation of the Mini, as my 17" PowerBook will display/maintain this setting (again with over-scan). So far I have not found the alternate settings (including those registered by the PowerBook) & techniques posted elsewhere in this forum to be effective when adapted to the Mini/XBR.
Please note that my primary objectives (equally weighted) going into this were;
1) getting on the HDTV bandwagon, by purchasing what I believed to be the best combination of technology/quality/future proofing/price. Regardless of how the Mini might ultimately perform when connected, I'm very happy with this set as a TV (Although the 1080p capability via 1080i input continues to confuse).
2) connecting a Mini I had purchased last summer, to a large digital display. The obvious & elegant manner in which a Mini can be integrated into a home theater/home network, is (I can attest) truly compelling.
Although I have yet to find the holy grail we both may be seeking, in a world where any thing seems possible, I remain optimistic.
Stay tuned here & elsewhere
SB
17 PowerBook G4 Mac OS X (10.4.5)

4g lte router with voice works great with data....stops working on voice

Have had the router about a month and half....works so much better than old MIFi Jet Pack although Jet Pack was good..Signal so much better with router...6-10 meg down 2.5-4 upload which is good for us out here in the country..............BUT here is where I need help..Voice works but then will just stop working without warning. Pick up reciever to make call and get dial tone alright...but when enter call it does nothing and finally gives busy signa. Try and call into the router and goes straight to voice mail. Only way to get it back working is to power off router and power up. Then it is back working for .....hours, couple days, then all of sudden ....won't work..Have to reboot again, and so on and so on....Have called Verizon and they said they will start a work order or something like that. Any one else with this problem?

Hoopop,
My parents are having the exact same problem! However, they don't have the data side of the router activated yet. They are only using the phone side. I had planned to turn on the data side but this problem is very concerning. Their old home connect never had this problem. Did you ever get this resolved?

I was thinking of buying my wife an ipad mini. I already have an ipad, ipod and iphone working on itunes on my PC. Will the ipad mini work along with all the others?

Hello,
I was thinking of getting my wife an ipad mini. I use a PC with Windows 7, latest version of itunes installed. From this I have an ipad, ipod and iphone, all of which work perfectly. My question is will the ipad mini also work and be recognised as another device?
Can I put some of my existing Apps onto the mini?
Thanks in advance.

Sure, but only if the new iGadget is "married" to the rest by virtue of having the same AppleID. You will be able to back up, update and upgrade its contents, apps and iOS on the iTunes application on the PC.
However, if it shares the same AppleID as the rest of your toys, she will be able to read your mail and see your messages, which could eventually lead to battles royal on who said what to whom. So beware, you have been warned.

Macbook Pro 2011 i3 Working Slowly with fan always running

My Macbook Pro (late 2011) 13.3" i5 with 4GB of ram is running very slow.
I have taken all of the initial steps such as:
Using cleaning programs
I tried to upgrade to OSX mavericks but took hours to complete and finally stuck in finalization process.
One i tried to install OSX ML with DVD. and displyed a black screen with Panic Messages.
and the fan is Always running with a noise...
=========================================================================
EtreCheck version: 1.9.12 (48)
Report generated June 23, 2014 10:39:24 PM GMT+04:00
Hardware Information:
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
Mac OS X 10.7.5 (11G63) - Uptime: 0 days 4:45:9
Disk Information:
TOSHIBA MK5065GSX disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
max (disk0s2) / [Startup]: 499.25 GB (487.7 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Apple Optical USB Mouse
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple, Inc. MacBook Pro
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
User Login Items:
None
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
JavaAppletPlugin: Version: 14.3.0 - SDK 10.7 Check version
Audio Plug-ins:
iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
    18% Finder
    9% Safari
    5% SFLSharedPrefsTool
    5% diskimages-helper
    4% WindowServer
Top Processes by Memory:
131 MB WebProcess
94 MB Safari
49 MB WindowServer
49 MB Finder
41 MB mds
Virtual Memory Information:
2.14 GB Free RAM
759 MB Active RAM
295 MB Inactive RAM
851 MB Wired RAM
262 MB Page-ins
0 B Page-outs

My Macbook Pro (late 2011) 13.3" i5 with 4GB of ram is running very slow.
I have taken all of the initial steps such as:
Using cleaning programs
I tried to upgrade to OSX mavericks but took hours to complete and finally stuck in finalization process.
One i tried to install OSX ML with DVD. and displyed a black screen with Panic Messages.
and the fan is Always running with a noise...
=========================================================================
EtreCheck version: 1.9.12 (48)
Report generated June 23, 2014 10:39:24 PM GMT+04:00
Hardware Information:
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
Mac OS X 10.7.5 (11G63) - Uptime: 0 days 4:45:9
Disk Information:
TOSHIBA MK5065GSX disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
max (disk0s2) / [Startup]: 499.25 GB (487.7 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Apple Optical USB Mouse
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple, Inc. MacBook Pro
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
User Login Items:
None
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
JavaAppletPlugin: Version: 14.3.0 - SDK 10.7 Check version
Audio Plug-ins:
iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
    18% Finder
    9% Safari
    5% SFLSharedPrefsTool
    5% diskimages-helper
    4% WindowServer
Top Processes by Memory:
131 MB WebProcess
94 MB Safari
49 MB WindowServer
49 MB Finder
41 MB mds
Virtual Memory Information:
2.14 GB Free RAM
759 MB Active RAM
295 MB Inactive RAM
851 MB Wired RAM
262 MB Page-ins
0 B Page-outs

Data recovery from N97 mini

Hei all,
I’m using Nokia N97 mini.
Along with Phone memory and Mass memory, I inserted one 1GB memory card also.
Yesterday, I was trying to copy some files in ‘mass storage’ mode via cable into that 1GB card. While copying, some files could not be copied and I got error message.
So, I aborted the whole operation. From then, I couldn’t find my personal data from the Mass memory.
Along with some system folders on the mass memory, I have one folder ‘My data’ in which I save all my data.
I’m unable to see the ‘My data’ folder.
It shows that ~2GB memory is being used on mass memory. If I check the size of all folders that i can see, its only 45MB.
So, my folder is occupying space. But, i’m unable to see that.
Please help me in recovering my data.
-Babloo

Download and install an app from www.ovi.com called y-browser and see if that allows you to see your folder.

Will the G-Drive Mini work with the Thunderbolt to FireWire adapter?

I'm closing in on buying a new MacBook Pro, but the lack of FireWire on the new retina models is worrying me. I've seen a lot of negative responses in regard to the Thunderbolt to FireWire adapter, specifically in regards to the G-Raid mini - most of them noting it's the dual drive that's the issue.
So would any of you happen to know - does a G-Drive mini work well with the Thunderbolt to FireWire adapter? I will be doing a lot of heavy video editing if that makes any difference.

I found out after purchasing a Retina MacBook Pro that you can in fact use the G-RAID Mini, the way to do it is to have two Thunderbolt to FireWire adapters, plug in the first one to the drive and the computer, wait for the drive to start clicking, and then plug the other cable between the computer and the G-RAID on the second port.
This obviously only works if you have a rMBP as you need the two Thunderbolt ports.

N97 Mini works slowly with data!

Similar Messages

Maybe you are looking for