NAC Profiler 2.18: Endpoint Profiles Missing

This is a licensed Nac Profiler which has no canned Endpoint Profiles included.
I go to Configuration--->Endpoint Profiles---> View/Edit Profile List
The message I see is "No Profiles Found"
Please clue me in on what I am missing.
This is from the install guide:
"Enabling Existing Endpoint Profiles
Cisco NAC Profiler ships with a number of predefined Endpoint Profiles that have been created and tested in field deployments. These Profiles can be re-used as-is if desired, or may be modified as the situation dictates. In addition, they serve as templates for creating new profiles as outlined later in this section, and illustrate how different rule types and varying levels of certainty can be used to accurately Profile devices.
To view the list of Endpoint Profiles that are currently available in the system configuration, navigate to the Configuration tab, and select Endpoint Profiles option from the global navigation menu in the far left hand pane, or select Endpoint Profiles from the leftmost column of the table on the main Configuration page. Select View/Edit Profile List to display the Endpoint Profiles currently saved in the system configuration."
Thanks.

To verify that Cisco NAC Profiler is populating entries properly in the Device Filter list of the CAM, log into the CAM as administrator. Select the Filters button under Device Management in the left-hand navigation bar. The following screen displays in the main pane of the browser, enumerating all the endpoints currently on the CAM Device Filter list.
After configuring the Server module parameters, adding NAC Events, and performing a Synchronization process (full or NAC Event level), the endpoints that are in the Profile(s) matching enabled (and synchronized) NAC events should be populated to the device filter list of the CAM.
http://www.cisco.com/en/US/docs/security/nac/profiler/configuration_guide/218/p_integration.html#wp1055729

Similar Messages

"Invalid Provisioning Profile. The provisioning profile included in the bundle {BUNDLENAME} [{BUNDLENAME}.app] is invalid. [Missing code-signing certificate.]" for brand new, vanilla Mac App

In OS X Maverick's XCode, I created a brand new Mac > "Cocoa Application", with Core Data and Spotlight Importerl; about as vanilla a Cocoa application I could muster.
Under Preferences > Accounts, I signed in to my Mac Developer Account.
In Targets > Identity, I set Signing to "Mac App Store", and was able to select my Mac Developer Account for "Team".
I then went to Product > Clean, and then Product > Build for... > Running, and then Produt > Archive.
In the Organizer, I select the resulting .app and click "Validate", and hit the Mac App Store radio, and hit "Next", and it's able to log into my Mac Developer Account.
I select my Provisioning Profile in the dropdown, and click "Validate".
It comes back with several errors:
1 - "Invalid Provisioning Profile. The provisioning profile included in the bundle {BUNDLENAME} [{BUNDLENAME}.app] is invalid. [Missing code-signing certificate.] For more information, visit the Mac OS Developer Portal."
2 - "The bundle identifier cannot be changed from the current value, '{DIFFERENT-BUNDLE-FROM-OTHER-PROJECT}'. If you want to change your bundle identifier, you will need to create a new application in iTunes Connect.
3 - Invalid Code Signing Entitlements. The entitlements in your app bundle signature do not match the ones that are contained in the provision profile. The bundle contains a key that is not included in the provisioning profile: 'com.apple.applications-identifier' in '{BUNDLENAME}.app/Contents/MacOS/{BUNDLENAME}'
I was able to do the same process before, for a vanilla app, before Mavericks. I'm not sure if this is a Mavericks error, or a fact that now I have multiple app projects. Particularly odd is that DIFFERENT-BUNDLE-FROM-OTHER-PROJECT in error (2) is not the same bundle name as the current project's bundle.
Would love any help you can provide! Thank you!

Seen this thread?
New codesign behavior, --deep option
"Code signing has some interesting changes in Mavericks (that apparently haven't made it into the release notes yet...). Note that this is a change to the operating system, not to the devtools."

ISE - Bulk change endpoint profiles?

Anyone know how to actually do this? I've got about 300 devices that I want to change the endpoint profile on, and I'd like to do it in bulk as opposed to clicking on each one. When I check more than one, my "Edit" option is gone.
I suppose I could export them, change the profile, delete all, then re-import the .csv... but that seems a little tedious if there's a way to do it in the GUI.
Thanks.

Hi Tarik,
Thanks... I wasn't aware it just updated the profile and didn't require a delete. That's good news.
I'll give it a shot.

How to use Device Profiles and Viewing Conditions Profile in Photoshop Elements 11?

In trying to get to grips with the Colour management aspects of PSE11, I have encountered the following problems:
Having selected "Display" a sequence of clicks (Change display settings -> Advanced settings -> Colour Management -> Colour Management tab -> Colour Management)
gives a screen which includes the headings:
Device Profile and Viewing Conditions Profile.
1. Device Profile. Besides sRGB and ARGB, the profile list includes the profiles for all of the Epson papers. (I have an Epson Stylus Photo PX810FW).
I changed the Profile to an Epson Grayscale, this was accepted within the menu, but there are no changes from normal when I viewed the image on the Windows screen or within
PSE11. ("normal" is sRGB or ARGB).
I thought it worth a try to test that, if I wanted the display image to closely represent what I would get on a particular Epson paper, this may be a way to do it.(I suspected this approach because I have never
seen it in the literature!).
So what is the purpose of all of the paper Profiles appearing in the Display listing?
2. The Viewing Conditions Profile has also several options. I have tried to find the criteria for choosing one rather than the other, but failed to find any information. Can anyone help? I seek general guidance
rather than the details of the Profiles.
As a seperate question:
Selecting Image on the PSE11 menu across the top of the displayed image, and then Convert Colour Profile, I tried this process on an image, converting tiff to sRGB. When saved there was an extra asterisk in the saved title but in this case,
the file was still labelled tiff and there was no change in the number of Mbs. If a conversion has taken place, how is one to know? Does saving a tiff file as jpeg change its colour profile? When is it useful to use this feature?
Many thanks to all responders!

Addressing your second question, you are confusing two different things.
tiff is an image file format, as is jpeg, as is psd, as is png, as are dozens (if not hundreds, http://en.wikipedia.org/wiki/Image_file_formats) of other formats.
A colour profile represents the colour characteristics of devices so that, for example, displays know how to display the colours, printers know how to print them.
Image files MAY, but do not have to, contain colour profiles.
For details:
http://help.adobe.com/en_US/creativesuite/cs/using/WS52323996-D045-437d-BD45-04955E987DFB. html
http://en.wikipedia.org/wiki/Color_management#Color_profiles
http://en.wikipedia.org/wiki/ICC_profile
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

User Profile Service Application - User Profile Incremental Synchronization

We have USer profile inplace. however User Profile service application does not auto run.
We need to run it. It does not automatically starts.
Please mark answer , if you think answer is helpful or correct.

The definitive guide on setting up and troubleshooting the User Profile Synchronization Server is Spence Harbar's Rational Guide to implementing SharePoint Server 2010 User Profile Synchronization.
This guide details the steps you need to perform to set up profile synchronization as well as details most of the common errors you will see with their resolution methods.
I recommend following this guide and if you still continue to have issues come back here with the specific details of the issue you are having.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

PS CC Converting to profile and embedding a profile

Hi,
I just started using PS CC 2014. I have a number of variables that have changed, such as a new iMac, secondary monitor etc. I am working in aRGB when processing and I go to print via the Canon plug-in for Photoshop. I convert to profile using the ICC profile I want to use for the media and ink set that I am using. I had custom profiles made for these papers. When I save the file after printing it, it embeds the ICC profile, example Epson Premium Luster etc. instead of keeping it in the aRGB working space. I do not recall ever seeing this done automatically in prior versions and years that I have used PS. I would like to save the changes etc. but I do not want the paper profile embedded because I may want to use another paper with that file next time. When I open the file the next time and I want to print it I get the message that there is a mis-match between working profile and embedded profile, or something similar to that ( I do not have the message in front of me ). That means I have to convert the file to the working space at that point and it is an extra step that I did not have to do before.
Is there a box I need to check or uncheck somewhere to keep the file in the aRGB space or am I just loosing my mind here?
Thank you,
Jim

I'm not a Color Management expert, but converting and then saving from Adobe RGB to a Printer Profile tags and saves that file with that profile.
Your file space, Adobe RGB, no longer matches Photoshop's Adobe RGB working space and that's why you get the warning.
If you are printing from Photoshop, you do not convert to that profile and save, otherwise it is embedded.
That would only make sense if the printer was somewhere else, and you would then make a copy of that file with that specific printer profile embedded.
What you do is use the Print dialog and check "let Photoshop manage colors" and you pick your profile from the list.
Your file stays tagged as Adobe RGB.
You can turn off mismatch warnings in CC 2014 But be sure you are not "hiding a problem".
Edit menu > Color Settings
Uncheck these boxes:
Gene

Output Preview Simulation Profile Automatically Shows Embedded Profile

I am curious if there is a way to have the embedded profile in a PDF to be the 'default' simulated profile in the Output Preview?
Without thishappening faulty percentages may be shown, or if a BW file has an embedded BW profile, but the simulated profile is a CMYK profile the file is now 4-color (in the preview only, obviously the file is truly BW).
Yes, I know we can look at the 'Object Inspector' to find out if, and what, profile is embedded (if any) and then change the Simulation Profile to match, but it would be nice to have that done automatically if possible.

My point is that, to start with, what should the profile be if the PDF contains 17 profiles? What if it contains 2 different profiles with the same name? Your task may be simple, but designing it in the software is anything but. Also, getting all the profiles could take many minutes for a PDF with tens of thousands of pages.

How can i add the Sigma 10mm 2.8 Fisheye lens profile from the camera profile in windows to lightroom 5?

It only seems to give me a 15mm fisheye option for Sigma and not the 10mm even though it is a profile in the camera profiles folder.
Can anyone help with importing this profile into Lightroom?

nickpearse wrote:
Just so it is black and white for my sake. I am shooting with a Nikon D7100 using a Sigma Fisheye 10mm 2.8 and using the Lens Profile of the Sigma 15mm 2.8mm on Lightroom.
Then the correct profile to use is the Sigma 10mm F2.8 if you want proper Vignetting correction and matching Distortion correction, but you'll need to shoot camera raw images (i.e. no JPEG lens profile). This is also why you are only seeing partial correction. As I said, "With a crop factor camera only the central crop area of the full-frame Sigma 15mm lens profile will be applied."
That said there is absolutely nothing wrong with using the Sigma 15mm lens profile with your crop factor Nikon D7100 if you are happy with the partial correction results, but you can also do this using the correct Sigma 10mm lens profile (set less than 100). There is a fisheye correction plugin called Fisheye-Hemi that works very similar in that it only applies partial correction. You're getting about the same results as Fisheye-Hemi for free using partial correction with the LR lens profile tool. That should make you happy! I suggest experimenting with both the 15mm and 10mm lens profiles and start shooting camera raw image files. Your're not realizing the camera's full capability shooting JPEGs!
In the DSC_7098 images posted none of them look very sharp (slow shutter speed?). Other than geometric correction I can't judge the posted images for "sharpness" in the corrected areas, which is the major concern. The biggest issue with rectilinear correction of fisheye images is loss of detail in areas with the most correction (edges and corners). If that were not the case people would use fisheye lenses for ALL wide-angle images and simply correct them inside LR. Sadly that's not the case and using LR's Lens Profile Distortion and other transform tools to correct fisheye images considerably softens the corrected areas (sides and corners).
Fisheye geometric distortion with some subjects is almost undetectable. So how much correction you need will vary by subject type and what the end use for the image. Any fisheye image that has correction applied will lose sharpness in the corrected areas, which may be fine for most purposes other than large prints.So it's best not to strive for 100% rectilinear correction–Just the correction needed to make the image look better.
Canon 8-15mm F4L FE on 5D MKII Full-Frame @ 15mm (No correction)
Looks good to me with no correction!
For more flexibility and better results PS's Wide Angle Adaptive filter and content aware fill tools will retain more image detail in the corrected areas. Here's the same lens and camera with an image processed in PS:
15mm Full-Frame Fisheye
LR Distortion = 50 (partial) PS Adaptive Wide Angle Filter + Content Aware Fill
The corner image detail is about the same in both of the above images at 1:1 view. Partial LR Distortion correction is good!
So what happens if I apply 100 Distortion correction to the image inside LR?
1:1 Compare View (lower-left) with LR Distortion = 100
100% LR Distortion correction of fisheye images is NOT good IMHO!

Installation of camera profiles and x-rite Profiles show up only in a certain folder of a catalogue

Dear all,
I'm working in a Maverics environment on which LR 5 is running. I've tried to install the camera profiles for the Nikon D800 by copying them to the users Library/Applicaton Support/Adobe/CameraRaw/Camera Profiles. After re-starting LR the profiles didn't show up. In a second attempt I tried to impoprt them with the extention manager which didn't work.
The second problem I'm facing is, that I've created camera profiles with x-rite. The profiles show up only in a certain folder in LR in the same catalogue. This means in this certain folder named shootings i can choose the x-rite porfiles. When I go -without leaving the catalogue- to an other folder ie. named sports, I can not see the profiles.
It would be great if somebody has a useful idea
Thank you very much in advance.
Cheers Stefan

See the instruction below for the location where your profiles should be placed. If they are placed in the same folder where Lightroom install package places the profiles created by Adobe they will not be recognized.
Your custom Camera Raw & Lens Profiles should be installed to the User folders…
Lightroom 5 no longer uses the shared ProgramData (Windows) / Application Support (Mac) folders for Camera or Lens Profiles. Instead, it stores the built-in profiles with its program files.
When you create camera or lens profiles, they must be stored in the user locations listed below. If you previously stored custom profiles in other locations, you’ll need to move them to these user folders, otherwise Lightroom won’t be able to find them.
Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.
The camera and lens profile file extensions are:
.dcpr—camera profile recipe file used for creating/editing a profile in the DNG Profile Editor
.dcp—camera profile
.lcp—lens profile

Converting LUTs to Camera Profiles in the DNG Profile Editor

Hi,
I've just started using the DNG Profile Editor, and can't seem to get the process right.
I have some film LUTs that I'd like to convert to camera profiles for my 5D Mk II.
Here's how I'm trying to do it, maybe someone can help me figure out what I'm doing wrong.
This is what I tried first:
1. Take a Color Chart into Photoshop, apply the LUT via Color Lookup adjustment layer.
2. Save out as 16bit TIFF
3. Open as Camera Raw, then save out as DNG
4. Open the adjusted color chart into DNG Profile Editor, run it through the color chart section to create a recipe of color adjustments.
5. Export out as Camera Profile
But when I open up a 5D image in Lightroom, the profile doesn't show up in the list, so I realised maybe it needs to be saved specifically as a 5D profile, but I can't figure out how.
If I:
1. Do steps 1-4 as above
2. Open a 5D DNG file so that I can set a 5D profile as the base profile
3. Load the recipe
The color adjustments appear on the color wheel, but nothing happens to the 5D image, no colour change at all.
Exporting it (which does say 'Export as 5D profile') does then give me a profile that shows up in Lightroom, but it doesn't do anything to the image...
What's the correct way of doing this?
Thanks!
S

I don’t know claim to know anything about the internals of DNG Camera Profiles, but I’m pretty sure you cannot take a RGB-file (TIF/JPG) DNG and make a raw-file DNG Profile for use with your camera raws, which sounds like what you’re trying to do.
Despite looking like it might work in DNGPE, starting with an RGB-file recipe (rather than a RAW-file recipe) will only lock the specific colors on the color wheel, rather than create a raw-capable camera profile.

When opening Elements 13 I have a message The monitor profile "Dell S2340L color profile, D65" appears to be defective. I have a new Dell PC with Windows 8.1?

When I open Elements 13 I have a message. The monitor profile "Dell S2340L color profile, D65" appears to be defective. I have a new Dell PC with Windows 8.1

You can check if the standard Srgb profile has been change.
Close Elements.
Go to Start menu >> Control Panel >> Color Management.
Click the Devices tab.
From the Device pop-up, select your monitor.
Check the ‘Use my settings for this device’ checkbox.
Make a note of the currently selected profile, which is marked as (default). If there isn’t an existing profile, you can skip this step.
Click the Add button.
In the Associate Color Profile dialog, select sRGB IE61966-2.1 (sRGB Color Space Profile.icm) and press OK.
Back in the Color Management dialog, select the sRGB profile and click Set as Default Profile, and then close the dialog.

"Every time when I edit my profile or update my profile, I had charged from Apple ITune 1 USD. Why not!!!!!!"

"Every time when I edit my profile or update my profile, I had charged from Apple ITune 1 USD. Why not!!!!!!"
"Every time when I edit my profile or update my profile, I had charged from Apple ITune 1 USD. Why not!!!!!!"
"Every time when I edit my profile or update my profile, I had charged from Apple ITune 1 USD. Why not!!!!!!"

Hello TOP SupaviT,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store & Mac App Store: About payment card authorization holds
http://support.apple.com/kb/ht3702
If you update your billing information, the iTunes Store or Mac App Store will place an authorization hold on your payment card account, usually in the amount of 1 USD or the local currency equivalent, to verify your account information.
Best of luck,
Mario

HT2542 one mac,2 profiles. Can each profile maintains their own iTunes but share same apple ID?

Hi,
one mac air created with 2 profiles.
Can each profile maintains their own iTunes but share same apple ID?

How so? We bought it and it would all be on one computer.

Linking my forum profile to the community profile

I'm requesting some possibilities to link my forum profile to my community profile (and to my LAVA profile, that would just be great).
I just realized this because in the statistics of my forum profile, I see a 'blog authored', and while I'm bloging on the communities, this isn't reflected.
After some more thoughts, people like me donate a lot of (unpaid) time to make NI products better. Our participation in the forums and the community could be some cheap way to pay it back to us. If a potential employee or contractor is researching about our knownledge, the profiles could be impressive. If we would have linked them better, we could present us in a much broader background (I really do use the different options I have online for different objectives of mine).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

I read your post prior to posting this. I agree that on the long term, a single profile would be cool. But I also like the differences of forums and communities, and having diffrent providers might be the prize you need to pay for this.
I'm more interested in short-term workarounds at the moment. Philosophically I also like to have a cloud identity, so I'm fine with a set of options to interlink my profiles. All the profiles offer some options to link to some web2.0-services (facebook, twitter, icq), the community profile has a field for the forum profile.
I also don't want to just discuss this on a technical level, but in the field of information management. If someone clicks on my profile, what information might this person be intersted in (and which information I want to provide). Well, it wont be a nice woman looking for a data but more likely some other engineer/technican/scientist or someone from a HR department that wants to check my technical expertise in different fields. So for them I would like to display a kind of top-ten charts where I am good at or interested in.
BTW: A personal messanger would be cool for this as well, so I could for example contact someone that was pretty active on the forums for let's say SMTP and directly ask this person if he/she can help my with my own SMTP problem.
I've seen this (some time ago) completley HR related on the joelonsoftware blog, where they where introducing a service (pretty expensive) for HR-departments where they could check the profiles (CVs) against the activity on the stackOverflow.
Don't misunderstand me, I'm not currently looking for a job, I target this with a technical knownledge-sharing intention. If I know that a memeber of the forums has some expertise I need, I'd like to have a look if this person hasn't founded a community for exactly this topic before asking.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Linking my Contact Profile with my BBM Profile...

Just bought a new Bold 9700 and loving it.
I managed to create multiple Contacts Profiles, BBM Profiles, and link it all to Facebook.
I have my own personal profiles which, at one point, were linked to my Facebook profile and were using my Facebook profile picture.
Subsequently I decided to change my BBM profile pic to a custom one, didn't like it, and wanted it changed back to my Facebook profile pic. I didn't know how to accomplish this, but thought that if I un-linked my BBM profile from my Contacts profile (which was still using by FB profile pic) and then linked them again then my BBM profile pic would automatically reset to my FB pic.
However, I cannot, for the life of me, figure out how to connect or link or whatever my Contact Profile with my BBM Profile.
Can anybody offer some help? I feel like I'm going crazy over here.
Thanks in advance,
Peachey

I read your post prior to posting this. I agree that on the long term, a single profile would be cool. But I also like the differences of forums and communities, and having diffrent providers might be the prize you need to pay for this.
I'm more interested in short-term workarounds at the moment. Philosophically I also like to have a cloud identity, so I'm fine with a set of options to interlink my profiles. All the profiles offer some options to link to some web2.0-services (facebook, twitter, icq), the community profile has a field for the forum profile.
I also don't want to just discuss this on a technical level, but in the field of information management. If someone clicks on my profile, what information might this person be intersted in (and which information I want to provide). Well, it wont be a nice woman looking for a data but more likely some other engineer/technican/scientist or someone from a HR department that wants to check my technical expertise in different fields. So for them I would like to display a kind of top-ten charts where I am good at or interested in.
BTW: A personal messanger would be cool for this as well, so I could for example contact someone that was pretty active on the forums for let's say SMTP and directly ask this person if he/she can help my with my own SMTP problem.
I've seen this (some time ago) completley HR related on the joelonsoftware blog, where they where introducing a service (pretty expensive) for HR-departments where they could check the profiles (CVs) against the activity on the stackOverflow.
Don't misunderstand me, I'm not currently looking for a job, I target this with a technical knownledge-sharing intention. If I know that a memeber of the forums has some expertise I need, I'd like to have a look if this person hasn't founded a community for exactly this topic before asking.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

NAC Profiler 2.18: Endpoint Profiles Missing

Similar Messages

Maybe you are looking for