Nagios on Oracle VM Server
Hi all,
We would like to install Nagios on an Oracle VM host server to monitor the VMs and I'm looking into the possibilities of this happening. I ran a quick test on a test Oracle VM box and installed Nagios and have everything running, but I can't connect to the web page. Here's the facts:
1. Apache is running on port 80
2. Port 80 is listening (checked with netstat)
3. SELinux is not installed on these Oracle VM servers
4. The firewall is allowing port 80 to come through and I even turned it off just to make sure
5. Connecting remotely does not work
6. Connecting locally does not work
7. Apache's access.log is blank
I would suspect this was some type of wacky networking issue, but being that I cannot access locally makes me really wonder what's going on. Any thoughts as to what else could be the problem?
FYI, we've had some networking issues and when the connection to the SAN dies our VMs go kaput. The servers stay running as they're on local disk. We want to have a way to monitor when this happens and we don't have another server lying around to install monitoring tools separately so installing on the host server seems like the best option.
-Keith
Please ignore. For some reason just rebooting solved the problem. Go figure.
Similar Messages
-
Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh. -
How to install Oracle VM Server 2.2.0 as 32-bit mode on a 64-bit machine.
Gurus,
If I am not wrong, the Oracle VM Server 2.2.0 installer for 32-bit and 64-bit are the same file.
I have AMD 64 bit machine, when I install Oracle VM Server 2.2.0, it installs as 64-bit.
However due to requirement, I want to install Oracle VM Server in 32-bit mode.
Will appreciate the steps.
Regards,
KrishnaKrishna,
Please note that the zip file from the Oracle eDelivery/Linux site contains a single Oracle VM server ISO file; this file is used for both x86 and x86-64 hardware. The Oracle VM server install routine automatically detects the hardware platform and installs the appropriate 32-bit or 64-bit Xen hypervisor. Regardless of the hardware platform, 32-bit or 64-bit, dom0 is 32-bit. Will a 32bit dom0 meet your business requirements?
Could you please let us know the business requirements re 32bit?
For details about the installation, sizing and server resource requirements please review http://itnewscast.com/chapter-4-oracle-vm-server-sizing-installation-and-updates
Respectfully,
Roddy -
How to integrate Oracle Portal running on Oracle Application Server 10.1.2
I have an Oracle Portal running on a Oracle Application Server 10.1.2.
Portal is responsible ( along with OID ) for the users authentication and authorization.
There is a new JEE application that was developed recently, which the Portal users must have access to.
HOW can I put a link into a page of the Portal, that redirects the portal user to a new browser window displaying my new application?
HOW can this new application, running in a separate weblogic 11g (10.3.5) server, automatically authenticate with the same username/password previously authenticated when the user logged into the portal?
Any ideas?
I´ve already thought in a bunch of ways to do it:
- put a link into the portal with a sessionId, then when opening the new app, it automatically tries to use the same session. How can I configure this session id during the creation of the portal's page? How can I use it from the new app to use the same session?
- put a link into the portal with a userid, then when opening the new app, it automatically tries to authenticate using a different authentication provider configurated in WL, which points to Portal´s OID. In this situation, how can I ensure that the user is already logged in and the session has not timed out?
- Should I use OSSO?
- Should I use OAM?
Any help would be appreciated!
MuriloHi Murilo,
A portletized version of your J2EE app would probably have been ideal for your purpose as it would handle both authentication (through SSO) and session information (through Portal framework as the framework can pass session information to the provider/producer). This would require changes to the application however.
Easiest approach would be to use mod_osso to protect your J2EE application. SSO would then handle the authentication for your Portal and your J2EE application.
Thanks,
EJ -
Developing for a Oracle Application Server with SSO
Hello there,
I'm developing an application (Java) that will be deployed as a partner application within an Oracle Application Server 10g at my client. This Oracle instance has a SSO already configured, and my app will use this Identity Manager (consuming the cookie). The problem is that at my company we don't have a SSO system configured, not even an Oracle Application Server, just a simple Oracle XE 10g to hold data. So I'm wondering how can I do to develop my application and test it.
I was looking forward to install an OAS and configure an SSO to validate my implementation, but the download link provided by Oracle is broken (http://www.oracle.com/technology/products/ias/index.html). Another alternative that I thought of was to install an OC4J and configure a Java SSO to simulate the behavior of OSSO, and make my app the cookie set by it. But OC4J supports only til Servlet 2.4 and my app is using 2.5...
And to complete, I cannot access my client's environment. I'm supposed to write a Deploying document telling him how to deploy my app and then try to access it through Internet.
Does anyone have an idea of how can I develop and test my app in my company's environment?
Thanks in advance,
Bruno Krebs.Apache 2.0 based OHS is located in Oracle Application Server Companion CD.
Pavna -
Oracle application server release 2
hi
i am trying to download oracle 10g application server Release2 from the link
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
but everytime when it starts downloading,it remains on 0% only..
is there any other link by wich i can download the oracle application server release2.....plz helphi
install download manager and after that try to download application server.
sarah -
Oracle Application Server Release 2 (10.1.2) Deployment Notes question
Hi!
I'm following the Oracle Application Server Release 2 (10.1.2) Deployment Notes (http://download-uk.oracle.com/docs/html/B25947_01/deployment_topics006.htm) for deploying an application, built in Jdeveloper 10.1.3 to AS 10.1.2. I have a question about Configuring JDeveloper to Generate Configuration Files That Are J2EE 1.3-Compliant. Do I need all the files in table 34-3? (http://download-uk.oracle.com/docs/html/B25947_01/deployment_topics006.htm#CIHHBJAI)
I already have some of these files. Can I change the version of existing files or do I need new ones? How can I change the version of existing files?
Here are the headers of some of these files:
web.xml: (Here I probably just change version="2.4" to version="2.3")
<?xml version = '1.0' encoding = 'windows-1250'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee">
orion-application.xml: (Is version="10.0" the version I need to change to "1.2"?)
<?xml version = '1.0' encoding = 'windows-1252'?>
<orion-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/technology/oracleas/schema http://xmlns.oracle.com/oracleas/schema/orion-application-10_0.xsd"
version="10.0"
xmlns="http://www.oracle.com/technology/oracleas/schema">
data-sources.xml.xml: (This file has only XML version, I don't believe this is the version I need to change)
<?xml version = '1.0' encoding = 'windows-1250'?>I only have these three files from the table in my application. Do I need application.xml and oc4j-connectors.xml too?
Thank you in advance!
BBFound some more details on this error in emias.log:
2007-11-21 09:22:54,538 [EMUI_09_22_54_/console/ias/oc4j/deployWiz/webModuleMappings$ctxType1=oracle*_ias$target=MY_AS_INSTANCE*_home$type=oc4j$ctxName1=MY_AS_INSTANCE$selectedStep=1]
ERROR ias.oc4j doWebModulesNavigation.920 - DeployWiz: Caught exception in doWebModulesNavigation
2007-11-21 09:23:49,054 [Thread-24] ERROR ias.oc4j doDeployWork.2628 - DeployWiz: Caught exception in doDeploy
java.lang.NoClassDefFoundError: oracle/dms/instrument/CorrelationContext
at oracle.ias.sysmgmt.task.TaskMaster.setContextECID(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.evaluate(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deployCommon(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deploy(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.EarDeployerImpl.deploy(Unknown Source)
at oracle.sysman.ias.sta.oc4j.DeployAppAdminObj.deploy(DeployAppAdminObj.java:164)
at oracle.sysman.ias.sta.oc4j.DeployWiz.doDeployWork(DeployWiz.java:2594)
at oracle.sysman.ias.sta.oc4j.DeployWiz.access$000(DeployWiz.java:179)
at oracle.sysman.ias.sta.oc4j.DeployWiz$DeployBean.doWork(DeployWiz.java:3098)
at oracle.sysman.emSDK.eml.util.iAS.ProcessingBean$ProcessingThread.run(ProcessingBean.java:264)
at java.lang.Thread.run(Thread.java:534)
2007-11-21 09:23:49,054 [Thread-24] ERROR ias.IASUtil displayError.753 -
java.lang.NoClassDefFoundError: oracle/dms/instrument/CorrelationContext
at oracle.ias.sysmgmt.task.TaskMaster.setContextECID(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.evaluate(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deployCommon(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deploy(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.EarDeployerImpl.deploy(Unknown Source)
at oracle.sysman.ias.sta.oc4j.DeployAppAdminObj.deploy(DeployAppAdminObj.java:164)
at oracle.sysman.ias.sta.oc4j.DeployWiz.doDeployWork(DeployWiz.java:2594)
at oracle.sysman.ias.sta.oc4j.DeployWiz.access$000(DeployWiz.java:179)
at oracle.sysman.ias.sta.oc4j.DeployWiz$DeployBean.doWork(DeployWiz.java:3098)
at oracle.sysman.emSDK.eml.util.iAS.ProcessingBean$ProcessingThread.run(ProcessingBean.java:264)
at java.lang.Thread.run(Thread.java:534)
2007-11-21 09:23:49,054 [Thread-24] ERROR util.iAS displayError.369 - An internal error occurred during the operation.
java.lang.NoClassDefFoundError: oracle/core/ojdl/query/LogQueryException
at oracle.sysman.ias.sta.oc4j.DeployWiz.removeAdminObjectsFromCache(DeployWiz.java:2708)
at oracle.sysman.ias.sta.oc4j.DeployWiz.doDeployWork(DeployWiz.java:2648)
at oracle.sysman.ias.sta.oc4j.DeployWiz.access$000(DeployWiz.java:179)
at oracle.sysman.ias.sta.oc4j.DeployWiz$DeployBean.doWork(DeployWiz.java:3098)
at oracle.sysman.emSDK.eml.util.iAS.ProcessingBean$ProcessingThread.run(ProcessingBean.java:264)
at java.lang.Thread.run(Thread.java:534) -
hi all,
I am tried to create new OC4J instance from App Server Control. Now OPMN is not starting. I get following error
iguration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:oracleAS.psmtech
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, orabpel, oraesb, owsm, Wsil]
2007-05-17 04:45:19.328--Begin log output for Mid-tier services (oracleAS.psmtech)
2007-05-17 04:45:19.328--Processing Step: starting OPMN
2007-05-17 04:49:35.921--End log output for Mid-tier services (oracleAS.psmtech)
OPMN has thrown an unknown exception
oracle.appserver.startupconsole.model.ConsoleException: OPMN has thrown an unknown exception
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:108)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticBadRequestException: Error starting opmn server: 2
at oracle.ias.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:147)
at oracle.ias.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:77)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:90)
... 6 more
Exception caused by
Error starting opmn server: 2
oracle.ias.opmn.optic.OpticBadRequestException: Error starting opmn server: 2
at oracle.ias.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:147)
at oracle.ias.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:77)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:90)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
I tried to validate opmn.xml file, shows following error
C:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl validate opmn.xml
LPX-00202: could not open "opmn.xml" (error 200)
XML parse failed: error 202.
opmnctl: opmn validation failed!
we have Oracle App Server on Windows server 2003, new installation.
plz help me with this problem.Not sure why you exeucute opmnctl validate, but
C:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl validate opmn.xml
LPX-00202: could not open "opmn.xml" (error 200)opmn.xml isn't in $OH/opmn/bin directory. It's in $OH/opmn/conf.
This is quite difficult to debug from this forum. Check the logs in $OH/opmn/logs and see if that helps. Also try to shut everything down (and check that all processes are gone) and then try to restart.
Regards,
Martin -
Oracle HTTP Server (OHS) Installation Problem on Win 2003 Server SP2
Hi,
I tried to install Oracle HTTP Server (OHS) on my Windows 2003 server SP2, however I couldn't manage to succeed this.
I tried on 3 different win2003 server SP2 machines and couldn't able to install properly.
I easily installed and run this HTTP server on my Windows 7 machine. However on the other partition of my PC
windows server 2003 is installed. It didn't worked on this OS.
Once I was somehow able to install OHS on my 64 bit Windows 2008 Server, but again never:((
I got the following error messages during the install.
waiting for your answers .
ERROR1
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (instance1)
Error
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Log
Step Create and Start AS Instance (instance1) started
Deploying NonJ2EEManagement Application...
Step Create and Start AS Instance (instance1) failed
Step Create and Start AS Instance (instance1) failed
Create and Start OHS Component (ohs1)
Log
Create Shortcuts
Log
ERROR2
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (inst2)
Error
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Log
Step Create and Start AS Instance (inst2) started
Creating Oracle Instance directories...
Recording OPMN ports reservations...
Bootstrapping OPMN configuration files...
Instantiating opmnctl for direct usage...
Registering instance
Step Create and Start AS Instance (inst2) failed
Step Create and Start AS Instance (inst2) failed
Create and Start OHS Component (ohs2)
Log
Create Shortcuts
LogA few guesses what could be wrong.
- Under which user are you installing, does this user have all the rights to create and start stuff.
- Have you first installed a weblogic server (this should be installed) and did associate any components with the weblogic domain?
I usually do not associate anything with my weblogic domain and configure the httpd.conf file for the Apache server by hand instead of using the enterprise manager.
Once the WebLogic server is installed i follow the following steps
Installation WebTier
Run setup.exe
Select Install Software - Do Not Configure.
Click Next.
Prerequisite Checks --> Next.
Accept the default installation directory.
Click Next.
Uncheck i wish to... click Next (in the pop-up Yes)
Click Install.
Click when the installation it finished and click Finish
Configuration WebTier
Run the file <WebTier-Home>/bin/config.bat.
Click Next
Uncheck Associate Selected Components with WebLogic Domain and click Next
Accept the defaults and click Next
Enter the parameters for the WebCache
Web Cache Administrator Password: password
Confirm Password: password
Click Next.
Select Auto Port Configuration and click Next.
Uncheck I wish to... and click Next. (pop-up Yes)
Click Configure
Click Next and Click Finish
When i follow the above steps an instance of the webtier is running. -
Problem with installation oracle application server 10g on Solaris 10x86
Hello all.
Help me, please.
I'm trying to install Oracle aplication server 10.0.1.2.0.2 on solaris 10x86.
When i install oracle infrastructure(metadata repository and identify management),
i have a problem - on step "Configuration Assistants", where assistants will confugure and start the components, "Single-Sign On Configuration Assistant" -Failed
(Details:....
Finished executing the call.Child Process has exited.
SSO Configuration Assistant failed.
Configuration assistant "Single Sign-On Configuration Assistant" failed
Anybody know, how solve this problem?
Sorry for my english.Hi.
Now
/etc/hosts
127.0.0.1 localhost
82.179.1.1 testoracle loghost
/etc/resolv.conf
domain kemsu.ru
nameserver 82.179.1.5
Or must be in /etc/hosts/
82.179.1.1 testoracle.kemsu.ru loghost
You about this? -
Installation problem in Oracle Content Server 10g
Hi,
I am trying to install 'ORACLE CONTENT SERVER 10g', as a part of this trying to click on 'Installer.exe' in '/win32'. When i click this installer.exe, it is prompting one COMMAND PROMPT SCREEN and it is disappearing soon. In fact it was suppose to ask language preference as per installation guide.
Dont know how to resolve this issue. please help me out.
Thanks in advance,pparkko wrote:
With this type of behaviour, you always need to find out the real error.
Try opening a command prompt (cmd) and running the command from the command line.
Then you can see what is going wrong.I have a question, I just upgraded our test 11i database (9i) to 10g (10.2), as a part of that upgraded forms, reports, graphics to patchset 18. Now planning to install 10giAS on appsTier on which forms, Apache and discoverer running. If I install 10giAS in differnet home, how can I get that in to appsTier?, does it mean adapcctl script no longer be used to start webservices?. I haven’t done this before, if my question is stupid, please ignore :). -
Installation Problem about ORACLE HTTP SERVER 10g
I tried to install oracle http server on windows xp sp2. Everthing was all right until
it made some recommend tasks while installing. It could'nt start the http server at there. I completed the installation. After then when i connect to the internet and try to start http server it starts. But when i do not connect to the internet it gives an error like apache.exe couldn't start on executing ApacheModuleonsinst.dll. I want to learn what causes to this problem.pparkko wrote:
With this type of behaviour, you always need to find out the real error.
Try opening a command prompt (cmd) and running the command from the command line.
Then you can see what is going wrong.I have a question, I just upgraded our test 11i database (9i) to 10g (10.2), as a part of that upgraded forms, reports, graphics to patchset 18. Now planning to install 10giAS on appsTier on which forms, Apache and discoverer running. If I install 10giAS in differnet home, how can I get that in to appsTier?, does it mean adapcctl script no longer be used to start webservices?. I haven’t done this before, if my question is stupid, please ignore :). -
Issues with Oracle VM Server 3.2.2
We're beginning to use Oracle VM Server 3.2.2 but we're having several different issues. Any help would be appreciated
1) Attempting to start a VM, the VM doesn't always start correctly. Console is giving us the following (when using xm create):
--- 8< cut >8 ---
PCI: Warning: Cannot find a gap in the 32bit address range
PCI: Unassigned devices with 32bit resource registers may break!
i8042: No controller found
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
G
--- 8< cut >8 ---
At this point, the VM hangs and doesn't go any further.
If we use "xl create" we get a different set of messages:
--- 8< cut >8 ---
xc: error: do_evtchn_op: HYPERVISOR_event_channel_op failed: -1: Internal error
xc: error: do_evtchn_op: HYPERVISOR_event_channel_op failed: -1: Internal error
xc: error: panic: xc_dom_boot.c:159: xc_dom_boot_mem_init: can't allocate low memory for domain: Out of memory
libxl: error: libxl_dom.c:207:libxl__build_pv xc_dom_boot_mem_init failed: No such process
cannot (re-)build domain: -3
libxl: error: libxl.c:711:libxl_domain_destroy non-existant domain 94
--- 8< cut >8 ---
It's odd that we're getting Out of memory errors as these systems have 192gb of ram and at the time have 180gb or so free.
total_memory : 196582
free_memory : 185336
2) When the VM does finally start, it's unable to restart gracefully. From /var/log/xen/xend.log we're seeing a message saying the system restarted too fast if we reboot it within a minute:
--- 8< cut >8 ---
[2013-06-03 18:16:23 4471] ERROR (XendDomainInfo:2265) VM XXXXXXXXX restarting too fast (Elapsed time: 41.631991 seconds). Refusing to restart to avoid loops.
--- 8< cut >8 ---
We've never had this before using previous versions of Oracle VM Server, but this was back in Xen 3 days. Is this time a tunable anywhere?
If the system has been up for a bit and we reboot we get this error:
--- 8< cut >8 ---
[2013-06-03 18:52:59 4471] INFO (XendDomainInfo:2148) Domain has shutdown: name=nc1-ma-np-yum id=108 reason=reboot.
[2013-06-03 18:52:59 4471] DEBUG (XendDomainInfo:3145) XendDomainInfo.destroy: domid=108
[2013-06-03 18:52:59 4471] DEBUG (XendDomainInfo:1951) XendDomainInfo.handleShutdownWatch
[2013-06-03 18:53:00 4471] DEBUG (XendDomainInfo:2473) Destroying device model
[2013-06-03 18:53:00 4471] DEBUG (XendDomainInfo:2480) Releasing devices
[2013-06-03 18:53:00 4471] DEBUG (XendDomainInfo:128) XendDomainInfo.create_from_dict({'vcpus_params': {}, 'PV_args': '', 'features': '', 'cpus': [[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159], [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159]], 'paused': 0, 'domid': 108, 'shutdown': 0, 'superpages': 0, 'VCPUs_live': 1, 'PV_bootloader': '', 'PV_bootloader_args': '', 'actions_after_crash': 'restart', 'vbd_refs': [], 'PV_ramdisk': '', 'memory_dynamic_min': 2147483648L, 'name_label': 'nc1-ma-np-yum', 'VCPUs_at_startup': 1, 'HVM_boot_params': {}, 'platform': {'tsc_mode': 0, 'nomigrate': 0}, 'PV_kernel': '', 'console_refs': ['e77fed2f-3447-b1a3-73a7-d0d69a00f4e9'], 'online_vcpus': 1, 'acpi_s3': 0, 'blocked': 0, 'acpi_s4': 0, 'on_xend_stop': 'ignore', 'pool_name': 'Pool-0', 'memory_static_min': 0, 'HVM_boot_policy': '', 'description': '', 'shutdown_reason': 1, 'VCPUs_max': 2, 'start_time': 1370284783.6600001, 'memory_static_max': 2148532224L, 'expose_host_uuid': 0, 'actions_after_shutdown': 'destroy', 'crashed': 0, 'memory_dynamic_max': 2147483648L, 'actions_after_suspend': '', 'is_a_template': False, 'cpu_time': 9.7732988130000003, 'is_control_domain': False, 'uuid': '92ee0de0-f6fe-49e0-be0c-a18d1a4a233b', 'memory_sharing': 0, 'shadow_memory': 0, 'target': 0, 'vcpu_avail': 3, 'on_xend_start': 'ignore', 'other_config': {}, 'auto_power_on': False, 'running': 0, 'actions_after_reboot': 'restart', 'vif_refs': [], 'vtpm_refs': [], 'devices': {'e77fed2f-3447-b1a3-73a7-d0d69a00f4e9': ('console', {'other_config': {}, 'protocol': 'vt100', 'uuid': 'e77fed2f-3447-b1a3-73a7-d0d69a00f4e9', 'location': '2'})}, 'dying': 0})
[2013-06-03 18:53:00 4471] DEBUG (XendDomainInfo:2570) XendDomainInfo.constructDomain
[2013-06-03 18:53:00 4471] DEBUG (XendDomain:476) Adding Domain: 109
[2013-06-03 18:53:00 4471] DEBUG (XendDomainInfo:2908) XendDomainInfo.initDomain: 109 256
[2013-06-03 18:53:00 4471] ERROR (XendDomainInfo:3318) Had a bootloader specified, but no disks are bootable
[2013-06-03 18:53:00 4471] ERROR (XendDomainInfo:496) VM start failed
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 482, in start
XendTask.log_progress(31, 60, self._initDomain)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendTask.py", line 209, in log_progress
retval = func(*args, **kwds)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2910, in _initDomain
self._configureBootloader()
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 3319, in _configureBootloader
raise VmError(msg)
VmError: Had a bootloader specified, but no disks are bootable
[2013-06-03 18:53:00 4471] DEBUG (XendDomainInfo:3145) XendDomainInfo.destroy: domid=109
[2013-06-03 18:53:00 4471] DEBUG (XendDomainInfo:2478) No device model
[2013-06-03 18:53:00 4471] DEBUG (XendDomainInfo:2480) Releasing devices
[2013-06-03 18:53:00 4471] ERROR (XendDomainInfo:133) Domain construction failed
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 131, in create_from_dict
vm.start()
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 482, in start
XendTask.log_progress(31, 60, self._initDomain)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendTask.py", line 209, in log_progress
retval = func(*args, **kwds)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2910, in _initDomain
self._configureBootloader()
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 3319, in _configureBootloader
raise VmError(msg)
VmError: Had a bootloader specified, but no disks are bootable
[2013-06-03 18:53:00 4471] ERROR (XendDomainInfo:2304) Failed to restart domain 108.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2286, in _restart
new_dom = XendDomain.instance().domain_create_from_dict(
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomain.py", line 1017, in domain_create_from_dict
dominfo = XendDomainInfo.create_from_dict(config_dict)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 131, in create_from_dict
vm.start()
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 482, in start
XendTask.log_progress(31, 60, self._initDomain)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendTask.py", line 209, in log_progress
retval = func(*args, **kwds)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2910, in _initDomain
self._configureBootloader()
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 3319, in _configureBootloader
raise VmError(msg)
VmError: Had a bootloader specified, but no disks are bootable
--- 8< cut >8 ---
So definitely, any help would be appreciated.
MelThis issue related to hardware of Oracle VM Servers installed on, please check hardware requirement in OVM 3.2.3 document again.
Best wishes,
Heng
Edited by: Vandy_Kh on Jun 3, 2013 7:46 PM -
SSL test in Oracle Application Server 10.1.2
Hi ,
we are using one Oracle Application Server Web Cache 10.1.2 as our web server.This redirects users to the Application Server.(EBS 12.0.4)
Now we need to implement SSL to secure user credentials.So i am planing to implement SSL in our web cacahe server.Will this be enough to secure user credentials??I dont have any idea.Please help.
Moreover our web cache is not configured in SSL during the time of installation.Can any body suggest me a place from where i could get one demo Certificate to put it onto my web server and test the SSL confiration.EBS has provided one demo for application tier(inside $ORACLE_HOME/apache/certs/).
But we will have to implement in web cahe tier not in application tier.
We are using EBS 12.0.4 in Hp-Ux v11.23.Hi susmit;
Please chekc below note which could be helpful for your issue:
SSL Primer on Using OpenSSL as a Certificate Authority with E-Business Suite (with a Windows Example) [ID 1175193.1]
Enabling SSL in Release 12 [ID 376700.1]
R12.0.6+ : Oracle Application Object Library SSL Test Transaction Data Test [ID 732282.1]
R12.0.[3-4] : Oracle Application Object Library SSL Test Transaction Data Test [ID 564066.1]
Regard
Helios -
Apex Listener vs. Oracle Application Server... advantages?
Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications?
We have an existing application server instance in production. Would introducing Apex Listener and the extra overhead be of any advantage?
Thanks in advance for your thoughts.Hello "Portal Dude",
Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications?APEX Listener introduces some additional features, such as Resource Templates, but lacks some others. Some people might want to migrate from OAS to another JEE Container that doesn't come along with a OHS/mod_plsql. Depending on the JEE Container, you could use AJP for load balancing, avoiding plain HTTP through a firewall, etc.
Would introducing Apex Listener and the extra overhead be of any advantage?The "extra overhead" may be smaller than you think. If you don't need the HTTP_Server component any longer, but can just deploy APEX Listener on the OC4J of your OAS, you might even save some bytes.
For several other aspects, there have been a few posts on that topic in the past:
{thread:id=1100122}
{thread:id=1555908}
{thread:id=1594158}
If there's anything you don't find in either the posts or the documentation, don't hesitate to ask.
-Udo
Maybe you are looking for
-
Hi A user had 2 separate windows open for Customer Receivables Aging. She used a filter option on the one window which resulted in the column order in window 2 to become mixed up. Now when you run the aging report it looks like this- 0-30, Future rem
-
Putting two photos together in iPhoto
For an online project, I need to take two photos and put them together with a line down the middle to separate them. It's two people and we have two separate photos but we want to use them in one photo space, if that makes sense. How do I create one
-
Help!..CS4 IS INCREASING FILE SIZES.
Hi all Wondered if anyone has had a problem with increased files sizes when opening a document up in Photoshop? Anything i open up is increased by two thirds in file size and i've no idea why ( e.g..8MB doc opens as 24MB doc) What is even more stran
-
I have been trying to move a 1 hour movie from my Mac to my iPad without success. I know I have clicked all the right boxes but iTunes is not cooperating.??
-
me and my sister have iphones but only one computer am i able to use itunes for both iphones or wont that work?