Name of the attachment is not appearing in the mail!
Hi group,
I am using the FM SO_DOCUMENT_SEND_API1 to send the mail with an XSL attachment, it is working fine but the problem is the name of the XSL attachment is not appearing, please see the below code how i am using
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = gi_doc_data
put_in_outbox = 'X'
sender_address = lv_sender_address
sender_address_type = lv_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = v_sent_all
TABLES
packing_list = gi_packing_list
contents_bin = gi_attachment
contents_txt = gi_message
receivers = gi_receivers
I am passing the gi_packing_list-obj_name as XXX_<date>_<Time> and gi_packing_list-format as XLS. After executing the program the mail has been successfully sent and the attachment too, but the name of the attachment is not appearing. it just showing .xls
Any input regarding this is highly appreciated.
Thanks in advance
hi , suresh
in gi_packing_list
do like this,
gi_packing_list-obj_descr = XXX_<date>_<Time> .
for file name pass parameter in obj_descr.
Regards,
Arpit
Similar Messages
-
All of a sudden I can not forward mail with an attachment. Anybody have any suggestions.
When you tap on the arrow in the upper right corner and select - Forward - doesn't another window popup that says Include/Don't Include? That is in reference to the attachment. Select Include from that window.
Sorry, didn't realize that my photo editing "skills" would produce the giant size screenshot!
Message was edited by: Demo -
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f -
Some contacts appear in the search but not appear in the contacts
Some contacts appear in the search but not appear in the contacts and same not appear in iCloud. Using iPhone 4 iOS 5.1
See if either of these help:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_The_list_of
http://helpx.adobe.com/photoshop-elements/kb/scroll-bar-missing-font-list.html -
my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.
You've connected the iPad via cable to your computer, and your computer's iTunes is up-to-date ? If it's icon isn't showing then try one of these troubleshooting pages :
PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Mac : If you don't see your connected device in iTunes for Mac - Apple Support
If the iPad is disabled then you'll need to reset the iPad back to factory defaults, after which you can restore to your backup -
Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is downloading at the app store and when complete, I can not open it or reinstall it. Has happened on the last 4 free apps. Help Please
Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.
-
After installing an App, the icon does not appear on the desktop?
After installing an App, the icon does not appear on the desktop? Where would I find it?
Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ? -
The device does not appear in the application find my iphone
The device does not appear in the application find my iphone. Because of this I can not lock my ipod 5
Try
iCloud.com from a computer
Select the Find My iPhone green circle
Top center select All Devices
Note is it shows here you can remove it from here too.
If it's not there it's linked to a different Apple ID -
ipod restore failed can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this
To get iTunes to see your iPod try:
- Placing the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Placing it in recovery DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Sometimes this program will get th iPod in recovery mode:
RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage -
why does the airplay symbol not appear on the top left of my imac i bout this computer this august and i bought the apple tv yesterday?? what can i do to make the airplay work??
Open > About this Mac and see Version. If it's 10.7.x, read > http://www.apple.com/osx/uptodate
-
I just received a new laptop running windows 7 home premium and wanted to install Firefox on it. I tried to install the most recent version. When i installed 6.0.2, the icon did not appear on my desktop (it was a hidden file in my desktop folder) and the program group does not appear in the start menu's All Programs list. The program *does* run though, at least it did a few times. This happened whether i installed as administrator or not. Installing firefox 3.6.22, though, DID create the program group and desktop icon, and upgrading from there removed them again. installing other programs (e.g. vlc, trillian, etc.) did not cause this behavior. I also tried this both with and without McAfee's realtime protection running.
Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ? -
I have iTunes ver 10 on a PC with Playlists which do not sync to an Itouch or Nano (6th Gen). Also, all the music does not appear when I check entire library and there is enough memory on the device. When I select to manually manage music on the summary tab and selected playlists on the music tab nothing changes. Either way all the music isn't on either device and the playlists are not on either device. Please advise next steps. Thank you.
Connect the device to the computer.
In iTunes, select the content desired to sync.
Sync.
This is all described in the User's Guide, reading it may be a good place to start. -
After the firmware was upgraded the artwork does not appear on my ipod? How do I fix this?
Try looking at the previous discussions with your same problem. Like the ones on the right-hand side of this page under the heading "More Like This".
-
I download a TV/computer program both as an mp3 (audio) and as a mp4 (A&V) I could play them directly using the URLs but neither appeared in the download dropdown or in i tunes. Does that mean that these files cannot be burned to a CD or DVD?
I download a TV/computer program both as an mp3 (audio) and as a mp4 (A&V) I could play them directly using the URLs but neither appeared in the download dropdown or in i tunes. Does that mean that these files cannot be burned to a CD or DVD?
-
User-friendly name for Panel Which Does Not Appear in the Extensions Menu
We are developing various Extensions panels for CS5 using ActionScript.
We only want a single Extension, our Main panel, to appear in the Windows>Extensions menu. Once that Panel is opened, it would open other extensions, as required.
The problem is, that the only way to remove a Panel from the Extensions menu is to remove its "<menu/>" element from the manifest. However, if I do that, then when we call those other extensions from the Main extension, the titale diplaed in the Panel is the "ExtensionID" from the manifest, which is not user firendly (such as "com.mycopmany.mysystem.Employees.extension1"), when I only wanted "Employees" to be in the title.
Any ideas what I can do?
TIA,
mlavieHarbs. - I have a follow-up question:
Object(this.parent.parent.parent.parent) returns an Object of type com.adobe.csxs.stagemanager.ExtensionWindow
"ExtensionWindow" is clearly a very useful object, but I can't find the SWC in which ii is deifned, and therefore can not create a routine which accepts as a paraemeter or returns a strongly type object of type ExtensionWindow. In addition, as it appears to be undocumented, the only way I can see which properties are available is to view tyhe result of "Object(this.parent.parent.parent.parent)" in the debugger.
Any ideas where the SWC is - or where there is any documentation for this object?
TIA,
mlavie
Maybe you are looking for
-
Hi everyone Just renamed my Radiohead 'In Rainbows' folder, and was then told iTunes could not find the file. I located them all, but now none of the album plays. If you try to covert it to AAC, it gives me 'an unknown error has occurred [-50]'. I've
-
I took a photo using burst mode on my 5S and can't get the picture off my phone
I took a photo using burst mode on my iPhone 5S. The "burst" consists of 4 photos, originally. I have picked my favorite and deleted the others. Still, I am unable to get that photo off of my phone using Photo Stream, or e-mail. Normally, my phot
-
Installing Adobe Reader XI and it is stopping at about 70%. No error, it just stops. If I hit cancel and try it again, I get the 2203 error.
-
Mes app s'ouvrent et se referment tout de suite.
Bonjour, j'ai récemment acheté un iPod 4eme génération reconditionné et depuis la mise à jour vers IOS 6.1.2 dès que j'ouvre une app celle-ci se ferme immédiatement, rendant mon iPod inutilisable. J'aimerai avoir des conseils. Merci d'avance.
-
Unzip'ing a split zipped file isn't working--.
Trying to split file using zip. I've used the -s to split the file (which worked fine). But unzip will not put the file back together. Why?