Nano 4th generation when plugged in shows the apple logo, then says connect to power and restarts

When I plug my Nano 4th gen in, it shows the apple logo, then immediately says connect to power and restarts the cycle, any ideas?

Well i guess to the trash it goes

Similar Messages

  • My iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% batt

    my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...

    Hello s0ha1b
    If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • When i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

    when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

    hi
    ... i  have  a similar problem
    but  just  with  the sleep botton.
    fist use  your adapter with other iphone/itouch ... is posible itś the  problem
    second ..  let your  phone charging
    ...normally if  we  conect  our  phone ... after  some minuts  it's put on.
    after 2 hours ... trate   to use  it ... if  after  it  your phone continue same... could  be qaa electrical/physic problem
    please  if you  have a guaranty use it.
    im  sorry but  my english   is terrible.

  • HT201210 i updated my iphone 4 to ios 6.. when it finished.. my iphone kept blinking just showing the apple logo.. i connected it to my itunes it didnt read.. help!

    i updated my iphone 4 to ios 6.. when it finished.. my iphone kept blinking just showing the apple logo.. i connected it to my itunes it didnt read.. help!

    Follow the instructions here > http://support.apple.com/kb/HT1808
    Note: You may need to try it several times to get it to work.

  • I cannot get imessage to work for me on my ipod touch 4th generation when i sign in with apple ID then it says confirm email and it keeps on going and going and going and never stops

    i cannot get imessage to work for me on my ipod touch 4th generation when i sign in with apple ID then it says confirm email and it keeps on going and going and going and never stops

    Try:
    iOS: Troubleshooting FaceTime and iMessage activation

  • My ipod turns on shows the apple logo, then turn into a white screen until it dies.

    I was updating my ipod and it was almost complete, it restarted and the loading bar under the logo stopped. Then the ipod restarted again and now when it turns on it shows the apple logo, then turns into a white screen until it dies. After I charge it again it does the same thing automatically. Ive tried to restart and restore it but it wont work. What do I do? I've tried all the troubleshooting and nothing is helping.  The screen is also cracked, this wasnt the cause because it worked fine for 3 months after it was cracked.

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If not successful that indicates a hardware problem. It could be that the damage started with the drop that also caused the cracked screen and the damage progress to the problem you have now. An example would a cracked that has finally progressed to it causing the problem.

  • My problem is that the iPod does not turn on. Everytime I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a warning sign.

    IS MY IPOD DEAD?!?!?!?!?
    I think I have the previous iPod Classic with a black glossy front and I am pretty sure it is glass at the front. My problem is that the
    iPod does not turn on. Every time I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a
    warning sign along with the Apple support website. At the same time I can hear the internal mechanics which is also very loud. I have attempted
    to charge it as well as connecting it to itunes but no success. Could you please help?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPad air would not start.  Only show the apple logo then no reaction after that.

    My iPad air would not start.  Only show the apple logo then no reaction after that.  This is already the 2nd time.  Last time I sent back to the service center and they said it is the system problem and reset the system and charge me for the service because they said it is not a hardware problem.  It happened less then 30 days and same problem again.  Can someone please send me the hard-reset step so I can try myself before I send back to the service center again?  thanks

    Here's the hard reset info:
    http://www.hard-reset.com/apple-ipad-hard-reset.html
    Post something about what happened with your visit.

  • Phone keeps turning on and off, showing the apple logo, then repeating...

    Phone keeps turning on and off, showing the apple logo, then repeating...

    Try this. It worked for a few users after a drop.
    Turn the iPad over and give it a very HARD slap on the back. May take several slaps.
     Cheers, Tom

  • I dont know how to get my iphone 3g to work. it will turn on and show the apple logo then it goes black. itunes will not recognize it and it wont reset

    I've tried charging it for days. it doesnt do anything. I'll hold the home and power button for 10 seconds and it just shows the apple logo and then goes black. and when i plug it into my computer it wont recognize it.

    Does it charge when you connect it to the adapter? If yes, make sure it is charged for about 10min, then connect in recovery mode, shown here: iPhone and iPod touch: Unable to restore
    If still not recognized, try the troubleshooting here: iOS: Device not recognized in iTunes for Windows

  • HT201412 Hello I made a update on my ipod to the ios 6 and its just been showing the apple logo then goig off and repeating that any ideas or help please?

    I made a update to the ios 6 and now its just showing the apple logo and going off to black and repeating tat any help please?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Hi! I purchased my ATV in Miami, but I live in Argentina. I have not been able to get the device running on any TVs. When I plug it in, it briefly shows the apple logo, then a sign saying no signal, check power cords and power source or sthg like that.

    Hi!
    I purchased my AppleTV in Miami, but I live in Argentina.
    I have not been able to get my device running correctly, and altough I've read tons of things online, I still have no solution to my problem.
    Here's the thing: after everything's plugged in and ON, I see the Apple logo briefly, then the TV displays a sign that says no signal, check pwoer cords and power source.
    But everything is plugged in and connected properly, otherwise, I doubt I'd be seeing the apple logo, right?
    I tried changing the HDMI cable, reversing the ends, switching ports, hard resetting the ATV, and trying a different TV. No luck.
    I read there is some issue with Samsung TVs, and most LED and LCD tvs down here are Samsung.
    On the other hand, I cannot return it or exchange it, since I bought it in the states.
    Oh! One of the tvs I tried it on displays a little sign that reads "connected at 1280x720 @60hz", and only THEN, goes to the "no signal" sign.
    Please!!! I am being driven up the walls here.... HELP!!

    Try this:
    Change the Apple TV resolution:
    Press and hold the Menu and Up button on your Apple Remote for six seconds.
    The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals.
    Press Play on the Apple Remote to keep the current resolution or Select to manually cycle to the next resolution.

  • How to on your ipad if it only shows the apple logo then it swithes off

    my ipad switches off when i try to on it it just shows the apple logo

    Charge it for at least 1 hour via a wall outlet,
    Then try this,
    Make sure IOS is updated to latest version
    (How to update your iOS device
    http://support.apple.com/kb/HT4623)
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).

  • My ipad3 keeps on restarting, showing the apple logo then restarts again. please help m

    It keeps on restarting everytime it is charge and then when unplug to power. just off.. seems like the battery is drained but coudn't charge it properly since it keeps on restarting..

    This will probably not help, but try it first.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that fails, you probably need to restore your iPad and you may will probably need recovery mode. Read this all the way through before you try anything. Read the part at the end about using recovery mode.
    http://support.apple.com/kb/ht1414

  • How can I fix my iPod that the screen shows the apple logo then goes black then back and will NOT connect to iTunes?

    I turned off my iPod then turned it back on. The normal apple logo appeared on the screen but then it went black and it won't connect to my iTunes. What should I do and what are my opptions.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Can Somebody tell me how to get my MBP like it Was...

    I received a new MBP (thanks to a genius who was tired of trying to fix all my software and hardware issues). The same tech said when the new MBP comes in he will transfer my data, settings, etc to my new computer and update it. I did not think of it

  • TS3694 Need help for ipad 3 download error 9006

    Have downloaded Itunes app and iphone5 IOS 7 successfully. Have installed IOS7 on Iphone 5 it works great. After Iphone successful install I moved to my Ipad 3. I get download error 9006 when connecting Ipad 3 in middle of the download. I have reboot

  • About get max value

    Hi,   I want to know how to sign a summary field with some colors.   For example,I made a report about every itemgroup's sales in each client.So I made two groups,the first is client,and the other is itemgroup,the sales is the summary field,I want to

  • IPad 2 iOS 5 Pages will not sync with iCloud

    I have my iPad 2 fully updated [iOS 5, latest pages update] and I turned on the options for using iCloud; however, when I go into pages, all I see are a bunch of up arrows in the upper right corner of each document and nothing is syncing.  I have the

  • NBWebRowSet used

    I try to use NBWebRowSet (in Forte) in an applet to display a db rowset, what I understood: . server side : a class building an XML file using NBWebRowSet. . client side : rebuilding a NBWebRowSet by reading the XML file (sending by htpp). questions: