Nano Blanked out

Hello everyone i got a 4gb ipod nano and i went to play my music but the screen is blank. the hold button isnt on and i tried to reset is and that doesnt work and then put it in my charger but still doesnt come on. please any one help ME!!!! thanks

The 5 Rs: Reset, Retry, Restart, Reinstall & Restore
Regards
Colin R.

Similar Messages

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs so my 2008 version of Mac Office and Intuit Quickbooks are blanked out. I need these programs. How do I proceed?

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?

Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen?

How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen? Not losing the other screen would be useful as I would like to, for example, monitor my emails whilst watching a video or to work on a project whilst watching an instructional video.
Note : Resizing a window to fill the screen is not acceptable as it still leaves unsightly borders.

bump

MIGO - Blank out the Qty in unit of entry field on PO receipt

Within MIGO upon PO receipt, standard behaviour is that it defaults Qty in unit of entry field to the total remaining outstanding qty.
Customer has requirement to blank out the Qty in unit of entry field on PO receipt.
We have looked at Business Add Ins for MIGO (e.g MB_MIGO_ITEM_BADI, MB_MIGO_BADI etc) and does not appear to be feasible.
Does anyone know a way to do this ?
Regards.
Phil.

Hi Joyce Roessner
Could you please check in MB01 t-code & see quantity field is open for edit or not.
This is controlled at Field selection & can be customised at fuctional level.
Make GOITEM-MENGE as Input at follwoing path
SPRO>MM>INv Mgmt & Phy Inv > Settings for enjoy trans>Settings for goods mvt(MIGO)>Field selection for MIGO
Thanks,
Mahesh

My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low.

My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low. How do i fix this????????????

If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

PO Account assignment category change blanks out GL account

When changing the AAC on a PO from 'I' to a 'U', for certain price conditions, the GL account gets blanked out. The OME9 setting for both I and U is 'GL account number field is mandatory'. This occurs even when no GR/IR have been performed on the PO. The error message ME083 - 'Enter GL Account' is thrown. Occurs in ME22N and when using BAPI_PO_ChANGE. Is this normal?
Thanks for your help.
-Sanjay

I think it is normal. There is a checkbox 'Derive acct. assgt.' in OME9. Here is the help text on this field.
If Inventory Management is not active in your system, you must specify (enter) the preliminary account assignments for all the items manually. Setting this indicator enables you to by-pass this step. You will then no longer get the dialog box for the entry of a preliminary account assignment.
You maintain the automatic account assignment specification facility using the Customizing functionality of Financial Accounting under Maintain automatic account determination.
Check the checkbox and see if it solves your issue. Apparently, checking this checkbox enables fetching the account from Maintain automatic account assignment config. table.

Can't blank out a portion of a PDF with Preview?

On my old iBook circa 2005 I can eliminate portions of a PDF with Preview, using Annotate, making a box over the area I don't want, coloring it white and voila! Now with my newish MBPr I can only get a white rectangle with a visible border around it. Grr. Is there no way any more to "blank out" areas of a PDF that I want to print and save my printer ink, as well as make the image take up less space on the page?

Solved again. Just use the crop and save as another PDF, serves the same function.

Iphone 4 showed "searching" on top left corner, now blanked out- wont turn on, only when charger is plugged in.

Hi all, can someone help me please?
Yesturday "searching" appeared on top left hand corner of my phone.. i tried taking out the sim and inserting it, still the same. not long after that, the phone just blanked out! i plugged in the charger and the apple icon comes on and it just stays on that screen! ive tried holding reset button down together with home button for 10secs or more.. still no results. the apple icon just comes on n off when it is plugged into the charger. as soon as i take the charger off, the icon goes off and phone just completely goes off. i cant get it to work normally anymore. i've only had this for about 1 month now!!! Anyone know what's going on or what i could do to fix this please?

Hello E_Motuliki
If you can, try and put your iPhone into recovery mode and then use iTunes to restore it to see if it resolves all the issues that you are seeing with the service as well as the powering off.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

[Solved] Screen blanks out after quitting X

Hello everyone.
I don't use any login manager such as GDM or Slim, I just start X from the terminal when I need it. However, after installing Arch the last time (new hdd), every time I exit X (XFCE 4 is my window manager) the screen blanks out. I know the system is still responsive, because if I type startx or reboot, it works. Calling startx wakes the monitor again. However, I don't need X all the time, sometimes I prefer not to use it.
I haven't dealt with this before and searching for a solution didn't help - nvidia users used to have this issue until a particular driver update.
However, I have an ATI card (HD 5750) and I use the xf86-video-ati driver.
Appending vga=773 to kernel options changes the resolution (of my ttys) but it doesn't solve the issue.
I'm kind of clueless about how to proceed, so any hints and tips would be welcome.
Thanks
Last edited by slapo (2010-05-02 09:50:51)

karol wrote:
I'm not an ATI guru but I hope you're not stuck w/ vesa :-) Surely there must be some other driver you can try.
Edit: http://bbs.archlinux.org/viewtopic.php?id=57084&p=72
It's a long thread, but be sure to read it all carefully <joking>
Thanks, I missed that repo
The catalyst driver doesn't have the issue, so as far as it works, the issue is resolved.

Having an intermittent issue where my iMac blanks out on me. On restarting I get bands running down the screen with pixels jumping around, then the white screen of death and nothing... Wouldn't restart all weekend, now fine..? any ideas whats wrong?

Having an intermittent issue where my iMac blanks out on me. On restarting I get several bands running down the screen with pixels jumping around within the bands, then the white screen of death and nothing... This happens intermittently and usually restarts OK. Happened again three days ago and wouldn't restart for two days (again the bands/pixels etc) but now operating fine? Any ideas whats wrong with my iMac and what the solution may be? Also gets very hot from time to time, particularly if I'm playing music/watching youtube/movies for extended periods. Mac is 3.5 years old, running OS X 10.6.8, processor 3.4 GHz i7 memory 8GB 1333 MHz DDR3

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider

Full screen preview blanked out in from options in audio video settings?

Hi all,
Am running FCP6 and have lost the option to preview fullscreen in the audio video settings menu. It is literally missing, as an option, though the space the option inhabited is still there. Only options I have are to preview via firewire to my CRT monitor. I have tried to refresh AV devices and all frames, but doesn't seems to help/work.
Any suggestions?
Many thanks,
-Tom

Hi David and thanks for your suggestion. I gave it a try and no luck. Its just the same. I have no options in video playback at all unless I connect my deck and then I have only the via firewire options, the deck provides. BTW, I know its the wrong forum, but I have the same blanking out situation in the output filed in MOTION.
Any more suggestions would be greatly appreciated.
Thanks,
-Tom

MacBook Pro/Thunderbolt Monitor blanking out

I have a MacBook Pro with 2 Thunderbolt monitors. My system is connected up like this:
MacBook Pro (running in clamshell mode) -------> Thunderbolt Port on MBP -------> Thunderbolt Display ------> Built in Display Thunderbolt Cable ------>Thunderbolt Display 2.
I also have a Thunderbolt disk drive attached to a thunderbolt port on the back of display 2.
I have a couple of problems every now and then. At times that second display blanks out for a second. I have noticed, it is most likely to happen when I put some IO on that thunderbolt disk drive. It just seems to me like the bandwidth of thunderbolt should be able to handle this.
Secondly. Sometimes when I boot up, the system considers that second display as the first which screws up my screens. I usually have to reboot to get it to work right. I notice that if I boot up with my MBP open, the system always considers the 2nd monitor in the chain the first display. Seems like it would always default to the first monitor.
Any help you could provide would be appreciated,
Rob

The Thunderbolt drive should be the first device on the chain, with the Displays being the last devices on the chain.
That should solve both of the problems.
If not, call back or post in the Apple Thunderbolt Display forum.
Good luck,
Clinton

PXI 8176 Controller Display Blanks Out.

The Monitor goes on standby (blanks out) randomly while my computer is still on. I've narrowed the problem down to the controller. I just want to know what options I have. Is there a part in the controller itself that I can replace?

I face the same problem with PXI 8196. The whole system hangs up but power supply still ok. HD LED also not lights up.

My 6070 navigation display blanks out after 5 seco...

My 6070 navigation display blanks out after 5 seconds. Not enough for a 'silver surfer' I am not able to find the adjustment, and it is not in the handbook. Can anyone help. Many thanks
Solved!
Go to Solution.

A reply from service would indicate this a feature of the 6070, back light being turned off. The time out cannot be altered. This feature is unsatisfactory as it times out too soon for slow fingers!

Macbook a1181 display blanks out replaced the lcd inverter still blanking out

Replaced inverter still blanking out.

OK--so this is an original MBP. You are in the late 2008-early 2009 section of the forum, so I am going to request that your post be relocated to the original MBP section.
Have you tried an external display? If you get good graphics on an external, it will be further conformation that the graphics chip is OK.
I am puzzled as to why the original display worked, but two separate replacements did not. I have heard of the brightness indicator getting stuck all the way to the left, so that the display remains black. Can you see the desktop at all by shining a bright light through the apple? If so, maybe you could go to System preferences>Desktop and see if the slider is stuck, and if so, move it to the right.
Good luck!

Nano Blanked out

Similar Messages

Maybe you are looking for