Nano plus, doesn't play all files

I've had my nano plus since christmas. First time I put some music on it was then by the drag-and-drog method. A couple of weeks ago I was going to replace some of the music. I deleted the files I wanted to delete and then put new files on the player. These files I'm able to play on other computers, but the player itself refuses to play them. The player though does play the music which have been there since christmas. These files are all in folders. Yesterday I tried to put files in the root and these files can be played. When I put these files into a folder old folder on the player they work, but if I create a new one?the files just don't seem to exist. Anyone recognizing the problem?Message Edited by Cajmatz on 03-22-20070:32 AM

There is a firmware limit of 60 folders including higher level folders that don't have music directly in them on the Nano Plus - try moving your music into less folders. The 37 you see are the ones in the first 60 that have music files in.
PB
Message Edited by PeeBee on 0-20-2006 06:52 PM

Similar Messages

Zen Nano Plus will not play all trac

My Nano Plus will not playback all tracks installed.My Firmware has been updated to .0.03I have formated the Nano Plus via Windows Explorer.
Tracks have been transferred via Windows Media Player 0 AND Creative MediaSource Organizer 3.30.2 with the same problem. The NanoPlus Mass
Storage Driver has been updated, too. I have tried it on both a desktop AND a notebook PC. The transferred tracks are combinations of WMA and MP3. Both played and unplayed tracks are a combination of
WMA-protected, WMA-nonprotected, and MP3, 28/59/60/92kbps -
nothing unique about the tracks that will not play.
The tracks have either been ripped from my audio CDs or downloaded via Media Player MSN Music store or MP3 store. I have licensed all tracks and they all play via Windows MediaPlayer and Creative MediaSource Player from my hardri've.
All tracks show up on the Zen Nano Plus in windows explorer and will play from the NanoPlus via Media Player and Creative MediaSource player, but they will not all play through the NanoPlus.
All problem tracks (if transferred via
MediaSource) will either be skipped or the NanoPlus will pause when the NanoPlus is playing or they simply are not
visible (if transferred via MediaPlayer0).
The problem tracks are not always the same tracks after I have re-transferred them (I have tired 4
times to clean/re-transfer tracks). I have 8 tracks and only 36 will play.When transferred via Windows MediaPlayer0, the tracks are organized into multiple folders.When transferred via Creative MediaSource, they are all in the root directory.
What can I do to get this to work properly?

That may be it!
My tracks have been transferred with WMP0 into the following Folder structure:
MUSIC-AUTHOR-ALBUM-Tracks.
In Explorer/MediaSource, there is One MUSIC folder containing 65 AUTHOR folders containing 74 ALBUM folders containg 85 Tracks.
My Zen Nano Plus MENU-MUSIC display shows only 3 Folders -- 3 ALBUM Folders of 36 Tracks -- the tracks that do playback.
Is this just an organizational problem?
If so, it's not very handy to Sync....there is nothing in the manual that explains this!
I'll re-organize and see.
What is the best FOLDER structure to use?

Is there any way to play all files in a directory by one url?

Hi all,
I am testing fms this days, I have put all my files(such as 1.mp3,2.mp3...n.mp3) in my directory.
I can play single file fine with url like this:
rtmp://localhost/mp3/mp3:x/2
but i want to know is there any way to play all files in my direcotry?
for example, user click the play button, the player(smp) automatic plays all files in the directory, link windows media server.
Should I use playlist? Or there is another better way?
Thanks a lot.

Hi,
FMS do not directly take a directory to play files, the file names have to be fetched some way (through script if needed) to make a playlist and then the play command needs to be repeated as many times.
Thank you !

Creative MuVo N2000 doesn't play MP3 files anymore?! HE

Hi everyone,
I hope someone can help me out. Here's the problem.
My MuVo N200 player doesn't play mp3 files anymore.. there's only a strange noise comming from the player if i attempt to play mp3's...he only plays the wma files?! I gave my player to my flatmate so she could here music on her vacation to the US, and that's when the problem started. I never had this problem before, and i wonder if she acidently pushed a buttom she shouldn't. I can't figure out how to fix it. Anyone has a clue what has happend, or if the player is "lost" :-( ?! PS: The player is brand new.
Help is appriciated
Thx Lizzy ;-)Message Edited by lizzard on 08-23-2005 03:45 AM

Unfortunately, NONE of my friends use Windows anymore , even at work we use Linux for security reasons. So what am i supposed to do now... They have a link at Creative that makes you belei've that they support Linux and offer you the possibility to choose the operating system, in other words=Linux. When i told in a mail to Creative Norway that they offer Linux support at their download-site, they actualy had the nerve to tell me that they don't do that!! I told them to remove the choice if they don't offer it, and don't try to tell people that they are eighter blind or stupid, and i pasted the Link + added a Screenshot of the page into the mail!! I realy got upset. It is the last time i by something from Creative. My first player from Creative lasted exactly 2 weeks, after that he stopped working for one odd reason, so i paid a little more in order to get a better one in exchange, and that device didn't li've longer than month eighter?
Not exactly QUALITY we are talking about..aren't we?
What to do, what to do?
Anyone has a clue?

On my mac I have both Quicktime X and Quicktime 7 pro. Both applications seem to be crashing quite often lately. This happens when playing all files types. I notice it more with .flv file. It usually happens when i grab the time slider bar and try to move

On my mac I have both Quicktime X and Quicktime 7 pro. Both applications seem to be crashing quite often lately. This happens when playing all files types. I notice it more with .flv file. It usually happens when i grab the time slider bar and try to move it. The apps will freeze and I have to "force quit" to get them to close. Sometimes putting the computer to sleep and waking it up helps. Is there a way to remedy this?

Oops, I needed to update my profile. I have snow leopard now

Nano Plus no longer plays any wma fil

I've had my Zen Nano Plus for over a year, and during that time it played both MP3 and WMA files with no problem. Now it won't play WMA files. I can transfer them to my player but it just skips those songs. This includes WMA files I downloaded from Limewire and from my CD collection. Any suggestions would be greatly appreciated.

If the WMA files are protected, they need to be transfered via Windows Media Player or Creative's software, otherwise the licenses won't transfer properly and the player won't play them. The Nano Plus does not support subscription music. I don't know anything about Limewire. The default on Windows Media Player is to create WMA files with protection. If you want to make WMA files from your CDs without protection, you need to change the setting in Windows Media Player.

Zen Nano Plus won't play MP3, can't convert to WMA, tried new firmw

Help!
I have just reloaded the firmware (and all my music) onto my Zen Nano Plus and it didn't fix my problem.
I have mostly .wma files and they play fine. I have tried to load .mp3 files but my player just skips them. I tried using the Organizer software to convert the .mp3 files to .wma files and it says they are converted but I get about min of each song and that's it.
So I don't know why I can't play .mp3 files and I also don't know why the .mp3's can't be fully converted to .wma's.
Can anyone help?Thanks in advance,Marci

Wave files will only play by tricking the player into thinking that they are wav files created by the voice recorder. Put wav file into a folder called Recorded Tracks and see if it plays. This will at least see if it will play something. How did you transfer your files?Try ripping a CD to wma files using MediaSource or Windows Media Player - sometimes the firmware gets in a twist and will play mp3s but not wmas, or vice versa. The solution to that is to reload the firmware - go to the Support->Downloads link at the top of the page to get the latest firmware for your player. Protected songs (wma files with DRM) need to be transferred using WMP or MediaSource to transfer the license across, but mp3 files can be drag'n'dropped in Windows Explorer. A protected song without a license will give the symptoms you detail. As it's duff from the start you might just want to take it back - but it's worth trying the firmware reload first to save you some bother. PB

Quicktime X Player doesn't play wmv files correctly!

I have a brand spanking new MacBook Pro 13" with Snow Leopard installed. When I play WMV files with Flip4Mac installed, I'm unable to use the scrubber to move to different parts of the movie being played. I have to wait for it to cache (basically play back) before I can skip around in the movie.
Funny thing is that my previous machine was a Macbook v. 1.1 and I upgraded it to Snow Leopard from Leopard with WMC. QT Player worked with WMV files just fine. What gives?

RE: +I found a solution that works from the Flip4Mac boards.+
+Go to System Preferences, select Flip4Mac then player, then advanced.+
+Then select QT Player 10 and all works fine.+
*For those of us w/ a different version of QT you won't need to specifically select QT 10, just hit the "plus" then browse to your applications folder and select whichever version of QT you have and this fix works. You don't need to have QT 10. (For those of us not blessed to be in Leopard yet.) I have QT 7.6.4 Pro and it works fine. Brings back the quick little "import" bar we love so much when opening WMV files. Turns out there was a purpose for it after all! Unless QT is told to import all media prior to opening the file, it imports as it plays causing the afore mentioned issue.

Snow Leopard finder doesn't list all files on Windows 7 volumes

From my Macbook Pro (10.6.8), I can connect to my Mac Pro, while it is running Windows 7 in Boot Camp, in order to access the Mac Pro's 6 volumes (1 Boot Camp, 5 Mac volumes). This is using SMB via Finder's 'Connect to server…' on an Airport network.
However, Finder never displays all the files and folders on any of the Mac volumes it connects to through Windows 7. It seems to show approximately the first 18-9 files and folders, and then nothing. The same applies when I open a nested folder — it doesn't list all of its contents.
Any ideas as to what's causing this and how I can fix it? I have searched all over but can't find any answers yet, so I'm hoping someone here has seen this before.

Thanks for the reply, but I do have the Restore Windows box checked (see below). And the Resume features info (cnet link) only addresses how to turn the feature off, either selectively or globally. I'm simply looking for the functionality that I had with Snow Leopard and now seems to be absent. Maybe it's a bug in my Finder.

Finder doesn't show all files

When I add new photos to iPhoto, they do not appear as a file or item in Finder Documents list. I thought Finder was supposed to show all files and items that you create?

santra, use EasyFind or Find File instead. BY default, Apple's own Finder/spotlight doesn't search everywhere and doesn't find everything (Mac fanboys will tell you this is a feature and is so intelligent that some people can't understand how smart it is; I prefer to think of it as a defect).
Easyfind is here: http://www.versiontracker.com/dyn/moreinfo/macosx/8707
Find File is here: http://www.versiontracker.com/dyn/moreinfo/macosx/10906315
I hope this helps you to find all your stuff.

IE8 doesn't play .mov files

i had downloaded few .mov files which are associated with an HTML page. I usued to open this HTML page in IE8 to view the .mov files in the browser itself when I was running windows vista. I have upgraded my system to windows 7. Now when I click on the .mov file in the web page, .mov files doesn't play within the browser, but it opens quick time player to play the movie. no issues with firefox (in vista & windows 7).
I have uninstalled & reinstalled quicktime 7.6.4. browser plugin is available in IE8 and enabled. still, no go.
your help would be much appreciated.
Message was edited by: devajeet

I have uninstalled & reinstalled quicktime 7.6.4.
Do you still get the same problem if you upgrade to QuickTime 7.6.5, devajeet?
http://www.apple.com/quicktime/download/

Zen NANO Plus doesn't switch more than 2 songs

Hi i have a problem with my new Zen nano plus mp3-player...
I can only switch 2 songs. If i switch to the thrid song the player automaticly shut down.
In the config menue i can switch as long as i want and the player doesn't shut down.
I formated the player in FAT32 and in FAT - System but it doesn't work acctually (Fastformatation).
And: If i wanna call the German Service hotline (+353 4380000) i only reach an private guy. I tipped in my telephon: 353 4380000 <-- is it right? Or are there any numbers before the "+" ?
Thx and bye (hope for many usefull postings )

Follow this link:
<a href=http://uk.europe.creative.com/support/downloads/download.asp?sOSName=Windows+XP&region=3&Product_N ame=Zen+Nano+Plus&Product_ID=2720&modelnumber=&dri verlang=033&OS=0&drivertype=0&x=33&y=5 target=_blank> Download Page for Zen Nano Plus[/url]
Under the firmware title, click the Show Details button and scroll down to the notes for the instructions.
Edit: Long link, my badMessage Edited by arcl on 2-27-2005 08:47 PM

How do I get iTunes U to play all files, right now it stops after each audio file and I will have to manually select the next one.

I am unable to find a way to get iTunes U to play all audio files one after the other without me manually playing each one of them.

Best I've managed is to create a smart playlist in iTunes with the album set to the title of the course. Have the smart playlist update automatically so that any new postings from the course are included within the playlist. After that you should be able to play the playlist and have all the audio files play one after the other. Hope it helps!

Finder copy doesn't copy all files

I have a dedicated disk for my Aperture masters, and to back this up while also defragging (according to a method described by Kevin J Doyle and Matthew Bergsma on the Aperture forum) I'm simply doing a Finder copy of the masters. I may have made a mistake when I relocated my masters a few months ago, because I put all 40,000 files in a single directory, at the "root" level of the drive.
I've searched around to see if there is a limit to the number of items in a single directory, and saw guesses but nothing definitive.
The problem is that when I try to copy the files, the Finder shows all 40,000 selected, but only copies 10,000 or so. I can't figure out why. If needed I can relocate the masters again into project folders, but I'm very curious why I'm seeing the partial copy.
Rob

I've got the same problem when copying multiple large files from the desktop to a network drive on Windows Home Server (using drag/drop). The files are about 1gb each, and if I copy more than one at a time, at least one will dissapear on the target machine. This is VERY repeatable.
When I watch it closely, I can see temporary files for all files appear, and the number of items, and the total size reported in the copy status on the Mac are correct. In fact, it takes about the correct amount of time for the total size copied. However, when the copy is complete, some of the files on the target drive vanish. There is no error dialog, files just go poof. Dragging the missing files again works, as long as no more than one is copied at a time.
A test with a few small files works fine. This only fails with large files. The total copied is less than 2gb, so this doesn't seem to be a FAT32 problem. There is ample space on the destination drive (over 1Tb free). The Mac is on a wireless 802.11N lan.
- Bruce

Jar -xvf file.war doesn't overwrite all files.

Has anyone else experienced the case when a WAR file created using Netbeans is extracted (jar -xvf file.war) doesn't overwrite all the existing files in the directory with the files contained in the WAR?

Looks like it doesn't always do it or I extracted the war file in another directory and then issued the mv command to move the tree thinking it would replace all files.

Nano plus, doesn't play all files

Similar Messages

Maybe you are looking for