Nano will not sync with windows 8.1

Recently installed windows 8.1 and cannot sync nano.  Restored to factory settings, but will not download songs from my itunes library to nano

backroll2blind,
The article linked below details a number of steps that can help get iTunes to recognize your iPod.
iPod not appearing in iTunes
http://support.apple.com/en-is/HT203449
All my best,
Allen

Similar Messages

  • 3rd gen iPod Nano will not sync with latest version of iTunes. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
    There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

  • I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • Tungsten t3 will not sync with Windows 7 64 bit using cradle sync

    Tungsten t3 will not sync with Windows 7 64 bit using cradle sync any suggestions?

    Try a low-tech solution.  Check the condition of the HotSync port connection on both the T3 and the cradle.
    Look for any possible corrosion, coating, or bent fingers in the cradle.  Sometimes a good cleaning with either Contact cleaner or isopropyl alcohol can work miracles!   (Use a q-tip swabbed in it, do not pour it onto the PDA).
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • I pods will not synce with windows 8.1?

    i pod nano will not synce using windows 8

    i dont get any message,  its just gets stuck while downloading, and will not finish.
    Many thanks.
    Try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?
    If you still can't get a working installer from the standard download page, try the following direct download links for 11.1.5.5:
    iTunes 11.1.5 for Windows (32-bit) - iTunesSetup.exe (2014-02-25)
    iTunes 11.1.5 for Windows (64-bit) - iTunes64Setup.exe (2014-02-25)

  • HT1414 My Nano will not sync with iTunes.

    Nano will not sync with iTunes.  I get an error to retry or to reinstall.  I've tried most of the troubleshooting suggestions on the website.  I have not reinstalled.  My iPhone and iPad both sync with no issues.  The computer recognizes the Nano.  Is reinstalling my only option?  This started when I tried to update my devices with new music.  I noticed the error the next morning before my run and my Nano all the sudden had no music.  Went to re-sync and I received the error.

    It could be a number of issues, such as the soddering that connects the 30-pin adapter that then connects to your computer could have come loose. However that is unlikely unless you have dropped your device a lot. But for anyone to be of more assistance you will need to provide more information. Such as: does the divice still show up in iTunes? If not then you may have to put it into DUF mode, or you could bring it in to your nearest apple store and see how much help they can be. Caution: once in DUF mode you should be able to restore the device to its orginal settings and the newest software, but you will have to re-sync your libary, redo all of your selections ect. unless you have a local backup on your coumputer which you should be able to acess by [option]-click the restore button and selecting the latest backup, (at least I believe its [option]-click).
    Hope this helps.

  • My ipod nano will not sync with anything

    about 2 months ago i bought an ipod nano 4gb. It has worked great until i updated my itunes the other day. I sync'ed it fine and added some songs, but now it will not sync with anything. not my computer, my buddies computer, or my xbox 360. it will charge though. I also have an ipd mini that works fine. i am getting very angry and i need some help befor i lose what is left on my already deminishing mind. PLEASE HELP ME!!!!!
    P.S. has anybody else noticed that apple has the worst support out there. i cant even get a phone number without buying a service plan

    Hey all, I had to call Apple Support to resolve the issue as nothing on the web provided an answer. So for all you out there having the same problem, here's the ituation and full resolution, so you can save time and money (if your product's warranty is expired).
    Situation: I bought a brand new Mac Air on 12/7/12 and tried to sync my 6th generation iPod nano (previously configured to a PC) with no sucess. ITunes was only allowing me to charge and eject the nano.
    Solution:
    1. Go to View>sidebar
    2. In the sidebar, click "iPod" under the Devicies category
    3. Click "Music" section next to "Summary" under the status bar
    4. Make sure "Sync" box is checked with your preferred preferences underneath
    5. Click "Sync" in bottom right corner of window
    Apparently, iTunes 11 is quite different and the sidebar with usual options and playlists does not appear unless selected in the "View" drop-down.
    FINISHED!  

  • My iPod Nano will not sync with my brand new Mac Air...will charge

    My iPod nano (touch) will not sync with my iTunes on my brand new Macbook Air. It will charge my iPod and give the option to eject the iPod, but it will not recognize my iPod to sync. Any ideas why and how to fix it?

    Hey all, I had to call Apple Support to resolve the issue as nothing on the web provided an answer. So for all you out there having the same problem, here's the ituation and full resolution, so you can save time and money (if your product's warranty is expired).
    Situation: I bought a brand new Mac Air on 12/7/12 and tried to sync my 6th generation iPod nano (previously configured to a PC) with no sucess. ITunes was only allowing me to charge and eject the nano.
    Solution:
    1. Go to View>sidebar
    2. In the sidebar, click "iPod" under the Devicies category
    3. Click "Music" section next to "Summary" under the status bar
    4. Make sure "Sync" box is checked with your preferred preferences underneath
    5. Click "Sync" in bottom right corner of window
    Apparently, iTunes 11 is quite different and the sidebar with usual options and playlists does not appear unless selected in the "View" drop-down.
    FINISHED!  

  • Centro & Treo 650 will not sync with Windows 7

    The 6.2 software will not work with windows 7. I have a new computer and can not get the phones to hot sync with my new computer. The Bluetooth does not recognize either of the phones. None of the other Bluetooth devices nor my car recognizes the phones. I do not have a data package with the phones so doing anything over the internet is out of the question. How do I get all the information that is on my two phones onto my computer?

    Try a low-tech solution.  Check the condition of the HotSync port connection on both the T3 and the cradle.
    Look for any possible corrosion, coating, or bent fingers in the cradle.  Sometimes a good cleaning with either Contact cleaner or isopropyl alcohol can work miracles!   (Use a q-tip swabbed in it, do not pour it onto the PDA).
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • My ipod classic will not sync with windows 8

    I have an ipod classic that will not sync with my new laptop which has windows 8 installed. When i plug it into my laptop it doesn't show up in itunes or my computer. I tried it with the ipod in disk mode, and it still won't show up in itunes, but does in my computer-however when i click on it my computer freezes so i have to unplug it.
    I've been through several forums already, and have tried uninstalling and reinstalling itunes, updating my drivers, renaming the driver that the ipod plugs into, all with no success. I used to have a similar problem on my old laptop, but this could be cured by right-clicking on the ipod in my computer and clicking 'format' - my ipod would then be wiped, but itunes would then recognize it and i could sync everything back onto the device-it was time consuming but it worked.  However i am unable to do thisnow as the ipod either doesn't show in my computer, or freezes my laptop when i do finally get it to show in disc mode.
    Can anyone offer any advice at all???

    I have an ipod classic that will not sync with my new laptop which has windows 8 installed. When i plug it into my laptop it doesn't show up in itunes or my computer. I tried it with the ipod in disk mode, and it still won't show up in itunes, but does in my computer-however when i click on it my computer freezes so i have to unplug it.
    I've been through several forums already, and have tried uninstalling and reinstalling itunes, updating my drivers, renaming the driver that the ipod plugs into, all with no success. I used to have a similar problem on my old laptop, but this could be cured by right-clicking on the ipod in my computer and clicking 'format' - my ipod would then be wiped, but itunes would then recognize it and i could sync everything back onto the device-it was time consuming but it worked.  However i am unable to do thisnow as the ipod either doesn't show in my computer, or freezes my laptop when i do finally get it to show in disc mode.
    Can anyone offer any advice at all???

  • Playlists will not sync with Windows PC

    My playlist in iTunes will not sync with my ipod Touch. any ideas?

    Okay, at the office I did the "null Sync" leaving contacts and calendar for last...It did sync...I came home and viola! it synced here as well...Only thing, my contacts changed a little...WMDC asks about "save to my device" or "save to pc"...it is a bit confusing because the choices on the phone are little different...Any advice on this?
    I am keeping my fingers crossed that it syncs at the office tomorrow morning...Thanks for your help
    Post relates to: Treo 800w (Sprint)

  • 3rd gen nano will not sync with lastest version of itunes

    I have a third gen nano I haven't used in a while.  I downloaded the lastest version of itunes, and the nano will not sync.  Also the screen layout does not look
    like it used to.  There is no left side "menu" on screen that all the writen support talks about.  Anyone can help??
    dmac49

    Hi there dmac49!
    I have a website here that should be able to help you get your iPod nano back to normal:
    Apple - Support - iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    This website is a home for troubleshooting assistants for different iPod models and generations. Just choose the one that most closely resembles yours and the assistant will walk you through some troubleshooting steps to attempt to get the issue resolved. Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • 7th gen nano will not sync with I tunes 64 bit on windows 8.1

    Apparently there was a thread regarding this a day or so ago and someone posted that you have to hide the left tool bar. I cannot find the function under the view menu to do so. Can someone possibly explain why this is happening. Its not that my music will not sync. Its that the I Tunes cant even see the ipod.

    backroll2blind,
    The article linked below details a number of steps that can help get iTunes to recognize your iPod.
    iPod not appearing in iTunes
    http://support.apple.com/en-is/HT203449
    All my best,
    Allen

  • HT3798 Ipod Classic will not sync with windows 8 and newest itunes

    I have ipod classic, 160gb, with new computer with Windows 8 and latest version of Itunes - came from xp and previous version of itunes - and never had a syncing problem. 
    All my songs are in new itunes on new computer, however ipod will not sync.  Have received -50, and duplicate file name - I restored and it will go so far and then freeze.  Or  I get -53.  Have tried lots of suggestions discovered on pages like these... but none have worked.  I do see there is a problem with classic and new itunes - does anyone have any solutions??
    Thanks.....

    Well I finally figured out the problem, not thanks to anyone from Apple for that matter. You would asume this problem has happened before and is still happening. The problem was I couldn't copy certain songs anymore from iTunes to my iPod Classic. When trying to copy certain songs I got an error.
    If you have this problem it means your song file is corrupted. You can simply check this by trying to copy it from your hard drive to an external hard drive. Here you will also get an error message.
    This means you need to replace all the corrupted files by a back up on your hard drive or download it again. I did this and now everything works fine.
    Hope this will solve a lot of problems.

  • Iphone 3GS will not sync with Windows

    I could not get it to sync and the dealer then told me it does not work with Windows 7 so I am returningd it and the other stuff I bought from the apple store and cancelled my order for another one and 2 new macs. The dealer was not too worried. Apple must have so many customers that they do not have to worry about new ones, nice business. Misrepresentation of a products capabilities is one day going to cost them though in my experience. I have bought a 3 ipods which did actually work. iPhone is a product that does not work with Windows 7 and a 1 year old laptop and in the year 2009 that is almost unbelievable and should be told to consumers before they buy and struggle and then realise they have been sold a dud.

    I think you are mixing things up. This is a patch supplied by Intel to motherboards and BIOS (BASIC INPUT OUTPUT SYSTEM) manufacturers who based their newest motherboards on Intel P55 chipset. To get this fix you update your BIOS. The BIOS is independent of any operating system (it comes with the motherboards already flashed). Has nothing to do with Apple or Microsoft.
    here is a link
    A few days ago we had reported a problem with iTunes sync between the iPhone and PCs equipped with Windows 7 of the Intel P55 chipset. Intel released a patch that solves this problem within seconds. You can download the patch here and then start the installation. Restart your computer and you will see all your sync problems are solved.
    NOTE: If your computer doesen’t feature the specs above, do not install the patch. Otherwise, happy syncing….
    http://www.funkyspacemonkey.com/intel-patch-solve-iphone-sync-pcs-equipped-windo ws-7-p55-chipset

Maybe you are looking for

  • List of material by material type

    hi experts, i need to take a report in excel for the materials based on there material type for a plant. In mm60 i tried it not coming excl. is there any table regards arun

  • How can I force a out-of-date client to do a sync with master?

    I use 'DB_REPMGR_ACKS_NONE' for some clients which locate in different areas. But sometimes the network is not that good, and causes the client data out-of-date. My question is that: 1. Is there a api that can do a manual sync without restarting the

  • Client upgrade from 10.1.0.2 to 10.2.0.1.0

    Hi, I am new to Oracle and trying to upgrade Oracle Client from 10.1.0.2 to 10.2.0.1.0, after looking at the documentation it looks like that I have to uninstall current installed version and install new version to upgrade. This sounds strange to me,

  • Report Viewer doesn't Preview after Export

    The Windows Application has a C# class for a Report Menu which calls any one of several reports.  The Report Menu allows the selection of various parameters for the report being called and then calls a C# class that builds a sql query and sets it as

  • Is it possible to run OS in 1440x900 on retina display?

    As in the subject - is it possible to kick off OS X to run as if the display was not retina at all? Thanks in advance.