Nano works fine in FM transmitter, but not computer?

Hi All -
I set up my Nano about 3 weeks ago via the USB cord and updated it as recently as Saturday (3 days ago). I bought a new FM transmitter for my car yesterday.
After using my Nano in my FM transmitter, the connection doesn't work via USB to my computer. Has anyone else experienced this?
Dell Dimension Windows XP iPod platform update 6-28-2006

Yes - I did reset it.
FYI - the FM transmitter I purchased ruined the sync connection in my Nano. I consider myself a pretty tech-savvy chick, so I guessed that accessories marketed for our iPods were safe. I was wrong. So will everyone please take note of my mistake?
I bought a transmitter that plugs in where the ear buds go versus the sync connection, along with a new Nano.
Be well!
Dell Dimension Windows XP

Similar Messages

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

Question
WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp

BDC with call transaction VD02 works fin in A mode but not in N mode

Hi All,
I have BDC program developed in 4.6c using call transaction VD02 works fine with mode A but not with mode N.
Now we upgraded to ECC 6.0.Do I need to change anything?

No, you don't have to change anything for ECC. BTW, I wonder why VD02 is not working in the background for you?

How do I send group emails from my iPad? They work fine from my MacBook but not the iPad.

How do I send group emails from an iPad? They work fine on my MacBook but not my iPad.

You need a third party app to do that. Look at Mail Shot or Group Email in the app store. You cannot do it with the built in mail app and the contacts app in iOS 5 without a third party app.

IPod nano works with USB 1.1 but not USB 2.0

Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

I have a similar problem with the following configuration:
- Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
- PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
What works well?
- All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
- iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
- iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
What doesn't works?
My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
- Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
- iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
- iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
Help!!!!!!!!!!!!!!!!

Text Index works fine consistently with Table, but not on underlying View

Hi,
We are facing weird issue relating to Oracle Text Indexes. Search using Oracle Text Index
works fine on a Table, but when running query on View it gives sometimes (not consistently)
ORA-20000: Oracle Text error:
DRG-10849: catsearch does not support functional invocation
DRG-10599: column is not indexed
Sometimes it works.
All of the below steps are run using User IR2OWNER:
STEP 1: Table CPF_CUSTOMER created as follows (3 Non Text Indexes defined at time of creation )
**Please note no Public Synonym is created for this Table**
** There is already another Table by same name CPF_CUSTOMER under different Owner (CDROWNER)
and that Table has Public Synonym CPF_CUSTOMER created. Other Table CPF_CUSTOMER does not
have any Views **
create table CPF_CUSTOMER
CPF_CUSTOMER_UUID NUMBER(20) not null,
SAP_ID VARCHAR2(10 CHAR) not null,
IRIS2_ID VARCHAR2(7 CHAR),
NAME VARCHAR2(70 CHAR) not null,
DRAFT_IND NUMBER(1) not null,
ACTIVE_IND NUMBER(1) not null,
REPLACED_BY_CUST VARCHAR2(10 CHAR),
CRE_DT_GMT DATE,
CRE_DT_LOC DATE,
TIME_ZONE VARCHAR2(3 CHAR),
CRE_USR VARCHAR2(8 CHAR),
CHG_DT_GMT DATE,
CHG_DT_LOC DATE,
CHG_TIME_ZONE VARCHAR2(3 CHAR),
CHG_USR VARCHAR2(8 CHAR),
VFY_DT_GMT DATE,
VFY_DT_LOC DATE,
VFY_USR VARCHAR2(8 CHAR),
DIVISION VARCHAR2(20 CHAR),
SALES_ADMIN VARCHAR2(3 CHAR),
MF_CUST_CDE VARCHAR2(14 CHAR),
CR_CTRL_OFCE VARCHAR2(3 CHAR),
DEFAULT_INV_CCY VARCHAR2(3 CHAR),
AUTOBILL_OVRRD_IND NUMBER(1) not null,
AUTOBILL NUMBER(1) not null,
AUTOPRT_OVRRD_IND NUMBER(1) not null,
AUTOPRT NUMBER(1) not null,
AVE_PYMT_DAY NUMBER(3),
TTL_INV_VAL NUMBER(12,2),
INHERIT_CR_TERM_ASSGMT NUMBER(1) not null,
NORMALIZED_NME VARCHAR2(70 CHAR),
OB_PYMT_OFCE VARCHAR2(3 CHAR),
IB_PYMT_OFCE VARCHAR2(3 CHAR),
CGO_SMART_ID VARCHAR2(20 CHAR),
REC_UPD_DT TIMESTAMP(6),
NCPF_CUST_ID VARCHAR2(7) not null,
CPF_CUST_LEVEL_UUID NUMBER(20) not null
tablespace DBCPFP1_LG_DATA LOGGING;
CREATE UNIQUE INDEX CPF_CUSTOMERI1 ON CPF_CUSTOMER
(SAP_ID ASC) TABLESPACE DBCPFP1_LG_INDX;
ALTER TABLE CPF_CUSTOMER
ADD CONSTRAINT CPF_CUSTOMERI1 UNIQUE (SAP_ID);
CREATE UNIQUE INDEX CPF_CUSTOMERI2 ON CPF_CUSTOMER
(CPF_CUSTOMER_UUID ASC) TABLESPACE DBCPFP1_LG_INDX;
ALTER TABLE CPF_CUSTOMER
ADD CONSTRAINT CPF_CUSTOMERI2 UNIQUE (CPF_CUSTOMER_UUID);
CREATE INDEX CPF_CUSTOMER_IDX2 ON CPF_CUSTOMER (UPPER(NAME))
TABLESPACE DBCPFP1_LG_INDX;
STEP 2: Create View CPF_CUSTOMER_RVW on above Table (and Public Synonym on View)
This View is created under same OWNER as Table created in STEP 1 (IR2OWNER)
create or replace view cpf_customer_rvw as
select
CPF_CUSTOMER_UUID,
SAP_ID,
IRIS2_ID,
NAME,
DRAFT_IND,
ACTIVE_IND,
REPLACED_BY_CUST,
CRE_DT_GMT,
CRE_DT_LOC,
TIME_ZONE,
CRE_USR,
CHG_DT_GMT,
CHG_DT_LOC,
CHG_TIME_ZONE,
CHG_USR,
VFY_DT_GMT,
VFY_DT_LOC,
VFY_USR,
DIVISION,
SALES_ADMIN,
MF_CUST_CDE,
CR_CTRL_OFCE,
DEFAULT_INV_CCY,
AUTOBILL_OVRRD_IND,
AUTOBILL,
AUTOPRT_OVRRD_IND,
AUTOPRT,
AVE_PYMT_DAY,
TTL_INV_VAL,
INHERIT_CR_TERM_ASSGMT,
NORMALIZED_NME,
OB_PYMT_OFCE,
IB_PYMT_OFCE,
CGO_SMART_ID,
NCPF_CUST_ID,
CPF_CUST_LEVEL_UUID,
REC_UPD_DT
from CPF_CUSTOMER;
CREATE OR REPLACE PUBLIC SYNONYM CPF_CUSTOMER_RVW FOR CPF_CUSTOMER_RVW;
STEP 3: Insert Test row
insert into cpf_customer (CPF_CUSTOMER_UUID, SAP_ID, IRIS2_ID, NAME, DRAFT_IND, ACTIVE_IND, REPLACED_BY_CUST, CRE_DT_GMT, CRE_DT_LOC, TIME_ZONE, CRE_USR, CHG_DT_GMT, CHG_DT_LOC, CHG_TIME_ZONE, CHG_USR, VFY_DT_GMT, VFY_DT_LOC, VFY_USR, DIVISION, SALES_ADMIN, MF_CUST_CDE, CR_CTRL_OFCE, DEFAULT_INV_CCY, AUTOBILL_OVRRD_IND, AUTOBILL, AUTOPRT_OVRRD_IND, AUTOPRT, AVE_PYMT_DAY, TTL_INV_VAL, INHERIT_CR_TERM_ASSGMT, NORMALIZED_NME, OB_PYMT_OFCE, IB_PYMT_OFCE, CGO_SMART_ID, NCPF_CUST_ID, CPF_CUST_LEVEL_UUID, REC_UPD_DT)
values (2.26283572796028E15, '6588125000', '6588125', 'S M Mooseen And Sons(PVT) Limited', 0, 1, '', to_date('15-03-2005 08:55:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('15-03-2005 14:25:00', 'dd-mm-yyyy hh24:mi:ss'), 'IST', 'licr2', to_date('19-02-2007 00:33:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('19-02-2007 06:03:00', 'dd-mm-yyyy hh24:mi:ss'), 'IST', 'BaseAdmi', to_date('15-03-2005 09:03:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('15-03-2005 14:33:00', 'dd-mm-yyyy hh24:mi:ss'), 'ninwasa', '', '', 'SRI06588125000', '463', '', 0, 0, 0, 0, null, null, 0, 'SMMOOSEENANDSONSPVTLIMITED', '', '', '', '6588125', 109966195050333, '14-JAN-09 02.49.28.325774 PM');
commit;
STEP 4: Create Oracle Text Index on Table CPF_CUSTOMER
EXEC CTX_DDL.DROP_PREFERENCE('CTXCAT_IR2_STORAGE');
EXEC CTX_DDL.CREATE_PREFERENCE('CTXCAT_IR2_STORAGE', 'BASIC_STORAGE');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'I_INDEX_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'I_INDEX_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'K_TABLE_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'R_TABLE_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'I_ROWID_INDEX_CLAUSE', 'TABLESPACE COMMON_SM_INDX storage (INITIAL 5M)');
-- Define IR2_AB_LEXER to handle Special Characters.
EXEC ctx_ddl.drop_preference('IR2_AB_LEXER');
EXEC ctx_ddl.create_preference('IR2_AB_LEXER', 'BASIC_LEXER');
EXEC ctx_ddl.set_attribute ('IR2_AB_LEXER', 'printjoins', ',_!$~%?=({;|&+-:/)}.@`^');
--Drop Indexes
drop index CPF_CUSTOMER_DIDX1;
-- CATSEARCH INDEX on CPF_CUSTOMER.NAME
CREATE INDEX CPF_CUSTOMER_DIDX1 ON CPF_CUSTOMER(NAME) INDEXTYPE IS CTXSYS.CTXCAT PARAMETERS ('STORAGE CTXCAT_IR2_STORAGE STOPLIST CTXSYS.EMPTY_STOPLIST LEXER IR2_AB_LEXER');
commit;
STEP 5: Run Query to use Oracle Text Index on Base Table (works fine always. No issues seen so far)
SELECT a.sap_id||'|'||a.name||'|' CUSTOMER_STR
FROM cpf_customer a
WHERE (catsearch(a.name, 'Mooseen'||'*', '')>0);
CUSTOMER_STR
6588125000|S M Mooseen And Sons(PVT) Limited|
STEP 6: Run Query to use Oracle Text Index on View created under Table (get below error periodically)
ORA-20000: Oracle Text error:
DRG-10849: catsearch does not support functional invocation
DRG-10599: column is not indexed
But it works sometimes as in STEP 5 and returns 1 row. It is never consistent. We would like to
provide access to this Table using View only. That is why we would like to get this query working consistently
using View.
Any help or tips would be greatly appreciated
Thanks
Auro

This is a known issue with CTXCAT indexes. Sometimes the optimizer will "drive" the query off another index, and request results from the CTXCAT index on a row-by-row basis ("does the row with rowid NNNN satisfy this CATSEARCH condition?"). That's known as a functional lookup, and is not supported by the CTXCAT indextype.
The only solution is to try to persuade the optimizer to use a different plan which does not use a functional lookup. This can be achieved by the use of hints, or sometimes by collecting or deleting statistics on the table.

Scaling mobile app works fine on the X but not on the Y

I originally made my app to work for iphone only but I am now scaling it to work on Ipad/ Android etc. I am doing all the scaling manually. It is a tabbed application.
I am scaling all x and y locations and widths and heights by a scale factor that is created using..
scaleFactorX = stage.width/320;
scaleFactorY = stage.height/480;
It works perfectly on the x but not quite enough on the y as objects look a little squashed vertically.
I can't think why this is. If I were to alter the y scalefactor it would put things out when at the original phone size.
The only part I'm not scaling manually is the actionBar and the bottom tabs. They are currently using default skins which use the DPI classification to determined size. I have however overridden this and set the action bar to use a skin with a much greater layoutContentGroupHeight. This hasn't however had any effect on the y scaling of objects in the main display area.
The y scale isn't out by much, but it bothers me. If anyone has any suggestions I'd appreciate it.
Thanks.

Adobe won't fix it as long there are not enough votes for my bug report!!!!
PLEASE VOTE: https://bugbase.adobe.com/index.cfm?event=bug&id=3376478

IPOD works fine on other computers but not on mine (insists on "restore")

Appreciate any help or guru advice. Switched to WIN XP Pro. Reinstalled iTunes 7.0.2.16. iTunes works fine on my desktop. When I went to sync my iPod, it said "iTunes detected a iPod in recovery mode" and insisted I do a "restore" on it, so I did, of course erasing all music from my iPod. But my computer still gives me same error message. I connected iPod to other computers in the house, and it works fine, and can load and play music fine. Any thoughts? Can I remove iTunes from my computer, and reinstall, and save ALL my music currently stored (whether purchased, ripped, imported, whatever?) What should I do? Help!! and Thank you immensely.

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

XML publisher report works fine in English environment but NOT in Dutch

We are using Oracle Reports to generate XML file which will be input for XML Publisher report . Our requirement is to generate report in Dutch (Netherlands) language.
We developed a report which is working fine in English. Then we copied this RDF file to NL directory also registered concurrent program in dutch language but then it stopped working and gives error.
Basically it doesn't create any XML output .
Please help . Its URGENT.
Thanks in Advance.
Manoj

Hi Norman,
Thanks for the reply, actually my query was failing as it was trying to compare English date format (1-MAY-2007) which was stored in a DFF with Dutch date (1-MIE-2007) database format ,so it was not generating any xml output.
We have resolved this issue but now we are facing few other issue which are ,
I have created a template which has a current date field. I inserted current date in Dutch format i,e, (1-juni-2007), but concurrent program output appears with english date format (1-June-2007).
Same template has the customer name with 'Title' and this also appear in english i.e.Sir , in place of dutch title (Dhr.)
Is it possible to display .pdf output with
portrait (first page - Letter to customer)
and landscape(second page - Invoice data details) styles for multiple customers in one request?
We can do it for one customer by passing customer id so letter part (portrait output) is out of grouping and only data details (landscape) appear with multiple lines , but when we try to run it for multiple customers in one go , WITHOUT specifying a customer , it FAILS .
Any help will be highly appreciated.
Thanks - Manoj, Utrecht

Port 25 works fine for SSL/SMTP, but not port 587?

So after doing a rather painful migration to new hardware to support 10.5 from a previously working 10.4 config...
I got SSL working -- web service is fine, mail service is fine for all ports for POP and IMAP...but not port 587.
- It's open on my firewall
- There's no software firewall impeding it
- Trying to telnet to port 587 results in nothing
It's as if the server isn't even listening to the port...
And the odd part?
- Mac OS X desktop clients report they can't connect on 587. Changing the port to 25 and leaving everything else the same (auth type, username, password) -- suddenly it works...BUT
- The iPhone is configured for port 587 and works every time.
My guess it that iPhone auto falls back to port 25 if all else fails, I can't explain why it would work. Bigger question, I suspect something got munged in the migration...is it possible it needs to be told to listen on 587 as well?

I saw that site...it mentions adding port 587 specifically -- or commenting out "the appropriate lines of master.cf"
I assume that means to uncomment out the submission port in that file -- or would it be better to add 587 specifically?
Also, I never allow unauth SMTP (even inside my network) -- I would want to continue to impose that on the submission port and the normal port 25; how do I do this?
Thanks in advance for the help.

Program is working fine in one version but not in other how to handle this

hi all,
i have a program which works fine in ECC5. in that program i have used some XML related classes and interfaces. but when i try to execute this in 4.6c version its showing lot of all errors saying that so and so class or so and so interface is not supported in 4.6c version like that.
how to overcome these errors, means how to make the classes and interfaces which work fine in ECC5 to work well in 4.6c version.

Hello Mr. Rich,
the coding which u provided was very helpful it almost solved my problem,but at
the the last iam stuck up with a small problem. i wrote the coding like this for my
program
tables:mara.
type-pools: truxs.
parameters: p_matnr like mara-matnr.
data: ixml type truxs_xml_table.
data: xxml like line of ixml.
data: size type i.
data: file_str type string.
file_str = 'C:\simp.xml'.
data: begin of itab_mara occurs 0,
          matnr like mara-matnr,
          ernam like mara-ernam,
          aenam like mara-aenam,
          vpsta like mara-vpsta,
      end of itab_mara.
select matnr ernam aenam vpsta from mara into table itab_mara up to 5
rows where matnr = p_matnr.
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
I_FIELD_SEPERATOR          =
I_LINE_HEADER              =
I_FILENAME                 =
I_APPL_KEEP                = ' '
I_XML_DOC_NAME             =
IMPORTING
   PE_BIN_FILESIZE            = size
TABLES
    I_TAB_SAP_DATA             = itab_mara
CHANGING
   I_TAB_CONVERTED_DATA       = ixml
EXCEPTIONS
CONVERSION_FAILED          = 1
OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   BIN_FILESIZE                  = size
    FILENAME                      = file_str
   FILETYPE                      = 'BIN'
APPEND                        = ' '
WRITE_FIELD_SEPARATOR         = ' '
HEADER                        = '00'
TRUNC_TRAILING_BLANKS         = ' '
WRITE_LF                      = 'X'
COL_SELECT                    = ' '
COL_SELECT_MASK               = ' '
DAT_MODE                      = ' '
IMPORTING
FILELENGTH                    =
TABLES
    DATA_TAB                      = ixml
EXCEPTIONS
FILE_WRITE_ERROR              = 1
NO_BATCH                      = 2
GUI_REFUSE_FILETRANSFER       = 3
INVALID_TYPE                  = 4
NO_AUTHORITY                  = 5
UNKNOWN_ERROR                 = 6
HEADER_NOT_ALLOWED            = 7
SEPARATOR_NOT_ALLOWED         = 8
FILESIZE_NOT_ALLOWED          = 9
HEADER_TOO_LONG               = 10
DP_ERROR_CREATE               = 11
DP_ERROR_SEND                 = 12
DP_ERROR_WRITE                = 13
UNKNOWN_DP_ERROR              = 14
ACCESS_DENIED                 = 15
DP_OUT_OF_MEMORY              = 16
DISK_FULL                     = 17
DP_TIMEOUT                    = 18
FILE_NOT_FOUND                = 19
DATAPROVIDER_EXCEPTION        = 20
CONTROL_FLUSH_ERROR           = 21
   OTHERS                        = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
but when i try to open the XML file into which the data has to be downloaded it shows the following error.
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A name was started with an invalid character. Error processing resource 'file:///C:/simp.xml'. Line 1, Position 23
<?xml version="1.0"?><%_TYPE0000000019><%_TYPE0000000019><MATNR Datatype="C" Length="18">00000000008...
help me to resolve this problem.
thanks,
anil.

ITunes WiFi Sync works fine for 4 devices, but not for my iPad2

I'm using the latest version of iTunes (11.0.4) on an iMac with the latest version of Mountain Lion (10.8.4) and multiple iOS devices listed below:
iPad 1 (iOS 5.1.1)
New iPad (iOS 6.1.3)
iPhone 4S (iOS 6.1.3)
iPhone 4S (iOS 6.1.3)
iPad 2 (iOS 6.1.3)
iTunes WiFi Sync works fine for all the devices but the iPad 2. They all show up in the "Devices" area of iTunes (though sometimes I need to power them down and restart them to get them to show up properly) and they all sync automatically when plugged into a power source.
The iPad 2, however, behaves thusly:
- Shows up under "Devices" in iTunes
- Can be synced wirelessly IF initiated from the computer
- Does NOT automatically sync when plugged in to a power source
- CanNOT be synced wirelessly from the iPad itself, as under settings > general > itunes wifi sync, it shows the screen that says "to enable wifi syncing with itunes, connect to ituens on your computer using a cable..." as if I have this feature turned off in iTunes (which I do not). The "Sync Now" button is not displayed (not even a grayed out version).
What I've tried:
- Repeatedly powering down and restarting iTunes, the computer, the iPad, and the router in various orders and combinations
- Repeatedly turning off and on the wifi sync feature via iTunes
- Experimenting with the "Open iTunes when this iPad is connected" option as this actually fixed a similar issue on my iPad 1
- Actually restoring the iPad to factory settings, then restoring from backup in case there was an issue with the iOS install
Nothing has helped
What I'm sure it's not:
- A problem with the usual iTunes settings (check "enable WiFi sync", uncheck "prevent iPads from syncing", etc.). Since all other devices work and I actually can perform a wireless sync when initiated from iTunes, I don't see how the issue could live here at all.
Any ideas? I'm pretty stumped!

Another oddity: When this iPad syncs, it does NOT create a backup as part of the process (whether wired or wireless). All my other devices do, as one would expect...

Android App - works fine in Device Central but not in phone

Greetings!
Just looking for some general "you might try this" tips. I've built a very basic game app for Android so I can start learning not only how to develop for Android, but also how to publish and distribute Android apps to users.
My game works fine when I test in Device Central from Flash. And I've been able to upload my app to the Android Market. But when I install and run on my Android phone (I've actually tested on two separate devices), I just get a light yellow screen with a series of tiny dots that move across the screen, almost like a loading indicator, but nothing happens after that.
I've tried publishing as both an Air (Air 2) file and a Flash (Flash 10) file. In device central, I tested the app on a Droid Incredible emulation. The devices I've tested on are an HTC Inspire (AT&T) and an HTC Thunderbolt (Verizon).
So, I know there's no way for someone to take my limited description above and say "this is your problem". Again, I'm just hoping for some general tips along the lines of "try publishing in a different version of Flash".
Any suggestions for where I should start digging?
Thanks in advance!
Joel

Sign out of the store on your phone, then sign back in. Note having content from more than one country's store may complicate the process of updating apps and downloading past purchases.
tt2

Query works fine in DEV instance but not in PROD instance

Hi,
I got an exceptional situation. I wrote a query to get the sign-on audit information. The query works fine in Development instance and executes within 2 seconds. But if i run the same query in production instance it does not finish execution. I checked for around 2 hours and after that i just stopped it. Does any one have any idea to find about the problem like to check temporary table space or any other thing please let me know. so that i can suggest the DBA to check for those parameters.
RDBMS : 11.1.0.7.0
Oracle Applications : 12.1.3
I am using Oracle SQL Developer 2.1.1.64
I am missing TOAD so much. My current organization dont have license to use TOAD.
Regards,
Syed

If your compnay does not have a Toad License, then you can use OracleSqlDeveloper.
Its free to use and made by Oracle.
You should post a query execution plan
explain plan for <your sql_statement>
and then issue this command:
select * from table(dbms_xplan.display());It's best if you spool the output through sqlplus and then post it up here.
I see you are using Sqldeveloper. The latest release is 3.2 which was only released within the last month.
Edited by: Keith Jamieson on Oct 25, 2012 1:21 PM
Added sqldeveloper note

Nano works fine in FM transmitter, but not computer?

Similar Messages

Maybe you are looking for