Native NW drivers for FC attached MSL

Hi. I need to run HP Library & Tape Tools to upgrade firmware on my FC SAN attached MSL6030 and the LTO-3 drives in it. Step one in L&TT instructions say to unload the backup software. In my case, with CA Arcserve 11.1 sp3, that unloads the device drivers. This means the tape drives show up as unbound devices using List Devices. So, I know NWTAPE is the NetWare driver for the tape drives, but I need more because this MSL is attached to the NetWare 6.5 sp8 server through a FC SAN switch. Server has a QLogic card w/ QL2x00.HAM loaded. So, what NetWare drivers do I have to load so the server will see the MSL and the tape drives, so HP LTT can see them and upgrade firmware?
Thanks!

Hi,
rwmastel wrote:
>
> Thanks for your reply, but I don't know how that can be true. If you
> don't have a device driver (like NWTAPE) then when you type List Devices
> at the NetWare prompt, you don't get recognized devices - they're
> unbound.
>
> So, if I do as you recommend and don't load any drivers, and then run a
> scan in L&TT, then I get an error (image attached). If I load NTWAPE
> first, then L&TT and scan, it starts to scan for a second or two, then
> generates the same error.
>
> I believe I need the device drivers loaded, otherwise how could any
> application see the devices?
>
> +----------------------------------------------------------------------+
> |Filename: HP_LTT_ERROR.JPG |
> |Download: http://forums.novell.com/attachment....achmentid=3921 |
> +----------------------------------------------------------------------+
That actually looks like a potential issue *because* nwtape was loaded
once. You'll likely have to reboot the server, and make sure nwtape
*never* loads. Unloading it isn't sufficient.
You shouldn't need a driver. LTT works at RAW device level.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Similar Messages

  • Windows 7 RTM drivers and native nVidia Drivers for T61p here, supports CUDA

    Since this seems scattered, I thought I would post these links to see if they help anyone.
    Get your Windows 7 RTM drivers here:
    http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html
    Get your nVidia 570M Windows 7 drivers, supports CUDA, x32 and x64 here:
    http://catalog.update.microsoft.com/v7/site/Search.aspx?q=nvidia%20quadro%20570M%20Windows%207
    I have updated my T61p with all the RTM drivers and have been using this nVidia driver for about 2 weeks. Flawless.
    There are many nVidia cards on this Microsoft site, I have only tested the 570M drivers. Feel free to search for your model of driver if you have something else.
    My be old news for people, but if it helps anyone, then great.
    -Paul

    I wasn't aware that Microsoft had this sort of thing available.  Now that I installed Microsoft's 570m driver, my NVIDIA Control Panel actually works.  I previously did an install by manually selecting the file after downloading and extracting the driver from NVIDIA's website.
    On a side note, both the Microsoft site driver and the slightly newer NVIDIA driver give me the same performance index scores (5.8 `graphics` and 6.1 `gaming graphics`) so I would reccomend using the Microsoft one since the Control Panel works with it.

  • Drivers for Windows 7. HP Pavilion g6-2337sr

    People, please, I can't find the drivers for my laptop HP Pavilion g6-2337sr for Windows 7. What drivers will be OK for it? I mean, what types or names, how can I find them? if anyone know
    This question was solved.
    View Solution.

    You're very welcome.
    I don't know what that device does.  I just don't like missing drivers.
    Do me a favor so I can investigate further...I am very sure the driver I attached should have worked.
    Go to the device manager and click on the smbus controller needing drivers.
    Then click on the Details tab at the top of the smbus controller driver window.
    Now you should see a Property drop down list and it is defaulted to Device Description.
    Drop down on that and select the second item (Hardware ID's).
    Post the top string of characters you see in the window.
    You can see that this forum member used the drivers I posted for his g6 which has the same hardware as yours and all the drivers worked including the one I attached.
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Downgraded-to-Windows-7-from-WI...

  • Link to Windows 8.1 Printer (Fax, Copy and Scan) Drivers for OfficeJet 4500 G510n-z

    Hello:
    Need to know where I can find updated drivers for my OfficeJet 4500 G510n-z printer.   I am using Windows 8.1 operating system.
    I have tried using the link at HP, but at the point that it supposedly gets to the install window, it asks me to insert the disc that came with the printer.  When I do that, I still get an error message saying something like "the link cannot be found."  I also get another message at some pont indicating that the full version needs to be uploaded.  Then, the same process starts all over again.   I should add that the printer disc says that it is compatible with XP, Windows 7 and other earlier versions, but not 8 or 8.1
    I have tried this 6 or 7 times with the same result.  Dell (the company from which I bought the laptop) was useless and suggested I contact HP. 
    I can no longer scan, either, because the computer isn't recognzing that the printer has a scan function, so when I go to use PaperPort 12 to scan stuff, it doesn't recognize that a printer is attached.
    Any help resolving these problems would be greatly appreciated.
    Thanks!
    This question was solved.
    View Solution.

    Oops!  Thanks "Shlomil" not "Shlomi" - Sorry!

  • Windows 8/8.1 32/64 bit Drivers for Satellite P100/P105 Users

    I made an original post with my now ancient Satellite P105-S9722 back in 2009 & 2011 for Windows 7 64-bit drivers. Windows 7 Drivers for P100/105 Systems
    Now that I have newer systems, I have experimented loading Windows 8 & 8.1 in my P105-S 9722 system.  Wanted to share some observations and any issues I came across.
    I have listed here some basic drivers you can use for your P100/P105 systems for Windows 8 and 8.1 and 32/64-bit to work.  Many of these listed are from other users, but there may be some additional drivers many may not know about.  I can't guarantee that all of these will make your system work 100%, but hopefully this will make your upgrade just a little quicker & easier.
    Before using these driver, I recommend you do a fresh install of Windows 8 or 8.1 32 or 64-bit regardless if you are using XP, Vista or 7 32 or 64-bit systems.
    Now I did use an installation DVD instead of a flash drive since you may need to add additional features to make certain programs work.
    After installing the Operating System (OS), immediately go to Programs and Features in Control Panel .  Make sure to turn on the .NET Framework 3.5 (includes .NET 2.0 and 3.0).  You will need this to install some of the Toshiba utilities.
    Many of the native drivers for Windows 8 & 8.1 will automatically be installed.  The wifi driver should work.  I am using a Sparklan GN-WS30N 802.11n using Ralink RT2860 chipset that works in 8 & 8.1.
    SOUND CARD: The biggest issue of Windows 8 & 8.1 32/64-bit is that there is no sound.  The old Audio 4.8.0.0 driver is the only driver that still works in Windows 8 & 8.1.  There are much newer versions, but for some reason, the old driver works the best.
    1) Download the driver.
    2) right click the file to extract it to a folder of the same name (do not double-click as the automatic installation will fail)
    3) double-click on folder Audio4.8.0.0, then double-click again on subfolder Audio4.8.0.0 if present
    4) double-click on folder BD1-BH1
    5) double-click on folder VXP64
    6) recommend to double-click on file BD16HAa.inf to check if your sound Hardware ID is listed under [Conexant.NTAMD64], should be HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31
    7) close BD16HAa.inf file if opened in step 6, then simply double-click Setup64.exe
    8) restart system (although audio may work right away, always a good idea)
    See Audio 4.8.8.0.zip Download on Bottom of post
    SYNAPTIC TOUCHPAD:  If your P100/P105 has a dual Synaptic touchpad like mine, the driver does work in WIndows 8/8.1, BUT you still need the utility to make it work.
    Download: Toshiba Touchpad
    Here's the thing with the Toshiba file, when you save it or run it, it unzips the folder into the TEMP folder.  When you go to run it, the main setup will work.  In case the autorun does not work, here's what you need to do:
    1) Change you folder selection so you can show hidden folders & files
    2) After unzipping the file, open C:\Users\"YOURNAME"\AppData\Local\Temp\Synantec Touchpad.temp
    3) Click on "Setup" icon to run the file. (This file worked just fine on my P105-S9722 machine)
    PCMCIA/Express Card/SD (TI) CARD READER - This driver will allow the PCMCIA, Express Card & SD Readers work normally on Windows 8/8.1. 
    There is issue with the Texas Instruments PCIxx12 Integrated FlashMedia Controller.  I did find a driver the does work:
    Download: Texas Instruments PCIxx12 Integrated Flashmedia Controller
    Nvidia Video Card - After loading the OS, the maximum resolution on the native drivers is only 1024 X 768.  In order to get the maximum resolution of 1440 X 900, a NVidia driver is required.
    Download: Nvidia GeForce Release 179
    Once this is loaded, use Windows Updates to download the most recent drivers.  Windows 8.1 definitely has a newer driver.  It is a good idea to download the NVidia GeForce Experience so that newer drivers can be installed: Nvidia GeForce Experience
    Fingerprint Reader (Biometrics Devices) - The Upek driver only goes up to Windows 7, but Windows 8/8.1 does have a native driver through AuthenTec that does work.  The Toshiba fingerprint utility will be needed in order to user the fingerprint reader.  The Toshiba Utility can be downloaded here:
    Upek Fingerprint Driver 5.8.0.4024
    The utility should work with the native driver.
    That's pretty much it for the basic drivers.  I did not include LAN or Wireless Drivers.
    Finally make sure the most recent Bios are installed v4.70: http://cdgenp01.csd.toshiba.com/content/support/do​​wnloads/sp100v470.exe
    There are attachments and links, but let me know if anyone is not able to download or use any of these links posted.
    Current Issues & Observations:  After I shut the computer down, when I open the screen, the computer automatically turn on.  I haven't figured that out yet, but I'm sure I'll post a fix in the near future.  The computer definitely boots much faster compared to Windows 7 and I've upgraded the older spinner drive with a Sata III SSD Drive.  Even with only 4GB of memory and the first generation Duo Core processor, P105-S9722 is still running well.
    I may do another post if I decide to try out WIndows 10, but for now, it's nice to know that even though the old P100/P105 systems do not support anything over Windows Vista, we can use the contempory software on a system almost 10 years old.
    Good luck.
    Attachments:
    Audio4.8.0.0.zip ‏9134 KB

    That should work as well for all the models in part-number family PSCJEU. At least these, probably more..
        Satellite C55-A5104 (PSCJEU-00K00R)
        Satellite C55-A5105 (PSCJEU-00K018)
        Satellite C55-A5180 (PSCJEU-00F001)
        Satellite C55-A5190 (PSCJEU-00L001)
        Satellite C55-A5140 (PSCJEU-00K001)
        Satellite C55-A5137 (PSCJEU-036012)
        Satellite C55T-A5123 (PSCJEU-01G00Q)
    -Jerry

  • Drivers for the sunfire v20z network card.

    does any one know were i could find the drivers for the sunfire v20z network card. and does anyone know the chipset of the card?

    That's a software question.
    This is a hardware forum.
    You didn't specify, but I'll presume you are not talking about any add-on card.
    The necessary software packages for the onboard
    broadcom BCM5703 gigabit (bge) circuitry are native to Solaris x86 (4/04 and newer).
    Therefore they'll be on your OS installation CD's.
    Just install the OS and rock-n-roll.

  • Linux drivers for SUN Quad PCI card

    Hi everyone.
    I have a question regarding drivers for a Sun QUAD network card. I belive it is a X1034A card.
    The card is also marked with a label saying: *5015406063174* and a barcode. On another label it says: P04280713
    Is there any chance that this card would function under a Linux operating system on an intel x86 server?
    Does anyone know where I could find the drivers for this configuration?
    Best regards,
    Rod

    Take a closer look at the actual card,
    particularly at the central Ethernet chip.
    If I recall correctly, it is a DEC DC2115x chipset for 10/100Mbit connectivity,
    and should be natively recognized by Linux.
    The 501-5406 QFE card, as shown on a 3rd party web site.
    Install it and boot your system.
    You should know in just a few moments whether it'll work,
    or whether the Sun firmware is of any concern.

  • Drivers for the Apple External Modem in 10.5

    Hi all! I recently upgraded my system with Leopard. All seems to be great save for the fact I can't use the external Apple USB modem attached to my Macbook Pro. While I don't fax that much I do sometimes have to use it to receive faxes and such from others. Is there a driver update for this for Leopard? Thanks to all in advance for the help!
    Lance

    The drivers for the Apple USB Modem are already installed along with Leopard..... I'm not sure why its not working.
    Try opening up System Preferences - Network, and see if it shows up/if its enabled.
    Other than that, I don't see why you should have any problems.

  • Qosmio F55-Q504 Drivers for XP

    Hello everybody,
    Please help. I have three questions:
    1. May be somebody's already met problems with drivers for XP for F55. I bought F55 with Vista, installed XP but I've found drivers for WiFi and nVidia only and I was not able to find drivers for other devices unfortunately. On the official site thare are drivers for Vista only and there is not BIOS version for XP too. May be somebody knows where I can find them.
    2. Together with the laptop there were no any CDs and recovery or reinstallation Vista is possible from HDD recovery partition only. For instance if I'm afraid to break recovery partition by my experiments with XP installation or Vista reinstallation and I want to make copy of the whole HDD to another one or to make copy of one partition. Is it possible? Did anybody try to do that? I tried to copy the whole HDD with Vista or separate partiotions (recovery partitions including) - the new HDD or partition is not loaded. I tried several time - there is no positive result. Is there any copy protection software on Toshiba's HDD? And how to make HDD copy to avoid data lost?
    3. F55 has GPS and preinstalled Garmin Mobile PC? Turn-by-Turn Navigation? trial version. While loading the Garmin Mobile asks to enter key. Where can I find the key for this trial version? There are no any CD, sticker or box with the key. And who knows is there email support from Toshiba? On the official site there are some phones only but I can't call them I need e-mail.
    Thanks a lot in advance.

    Good day,
    Thanks a lot for reply and usefull answer.
    I downloaded drivers according to your links and some of them were really good. I tried to install some other drivers desighed for Vista and I had a success. Now I have two device only in device manger which are unknown. These are Audio Device on HD Audio Bus (it likes you described, driver for Vista is not suitable) and a SM host controller (I don't know what's that but it's not cardbus controller). I'll try find somthing for them.
    And drivers installation arises new questions:
    a. Of course my control buttons (fn and dolby, play/pause etc.) don't work. You've written: "And I miss also the program that made the touch buttons work. Seems there is no equivalent for XP. As for Config Free program try to use a XP version of the program that is made for a Satellite A series laptop. For me it worked." Please explain what's Config Free? Before I had thought that to make above buttons operating I have to downgrade my BIOS version. But on the official site there are two BIOS version only and both of them are for Vista. Unfortunately there is nothing for XP. Is it really that Config Free is software which can force control buttons to work without BIOS downgrading?
    b. My laptop has 4Gb RAM. First time I installed Vista 32-bit edition and I saw that Vista saw all 4Gb of RAM. After that when I installed XP 32-bit edition I saw that XP saw 2,99 Gb only. I thought that after installation all drivers for my chipset the XP would see the whole 4 Gb of RAM. But now as I said above there are two unkonwn devices only in the Diveice Manager and XP see 2,99 Gb as before. Who knows should I find one more special drivers to allow XP to see the whole RAM or it's impossible for XP 32-bit and I have to install 64-bit edition?
    Concernig copy of HDD. I tried to do that by Partion Magic, Paragon Partition Manager, Acronics and Ghost Images. And I tried to connect HDDs by different interfaces (from native laptop controller to external usb and reverse, and from one external usb HDD to another) - nothing. When I'm taking HDD with new installed XP, connecting it through external sata-usb controller to one usb port from one side and connecting another HDD through external sata-usb controller to other usb port from the second side I can do copy of the whole HDD or partition from the first HDD to the second. And new created HDD works and loads good. When I'm trying to repeat the same but with original HDD with Vista and recovery partitions it doesn't work. Moreover some partition managers (e.g. PMagic) see the first partition (which is called "Toshiba" and it's not hidden but with unknown file system) and last recovery hidden partition as invalid partitions and refuse attempting to make copy at once. But even if partition manager doesn't write an error at the beginning (Acronics - the best) and makes partition copies successfully the new created HDD doesn't load. And all advices to recover Vista begin: "boot from recovery cd, choose system recovery.....". I haven't any cd and my recovery utility from HDD offers me to install Vista again without any recovery options. Unfortunately...
    Concerning Garmin I wrote to Garmin support and I'm waiting answer from them. That's great that driver for GPS from Vista is suitable for XP too.
    Tks for reply and tks in advance.

  • Drivers for Sun Floppy under Win 2000 on SUN Pci card.

    Hi,
    I'm running a Sun Blade 150 with Solaris 8. I have a Sun Pci card with Windows 2000 loaded. When Win2k boots, it asks for drivers for a "sun floppy". I've looked around for these drivers but I can't find them. Can anyone point me to them. Thanks.

    Take a closer look at the actual card,
    particularly at the central Ethernet chip.
    If I recall correctly, it is a DEC DC2115x chipset for 10/100Mbit connectivity,
    and should be natively recognized by Linux.
    The 501-5406 QFE card, as shown on a 3rd party web site.
    Install it and boot your system.
    You should know in just a few moments whether it'll work,
    or whether the Sun firmware is of any concern.

  • Boot camp drivers for Windows XP

    Where do I get the Boot Camp Drivers for Windows XP after installing Windows XP again

    Regarding my query, the following are attached:
    1. Proof of Purchase (Bill dated 26/12/2008)
    2. The Serial Number as noted from the Mac screen is as follows:
    Serial Number (system): YM******ZE4
    Hardware UUID: ****
    <Edited By Host>

  • Device Drivers for hp pavilion g6-1318ax windows 7 32bit for AMD processor

    I don't get device drivers for HP pavilion g6-1318ax for the operating system Windows 7 32bit. I have AMD motherboard & processor. I need all device drivers. What should I do?

    Hi:
    You will need to get the smbus controller driver from me...
    For the SMBus controller...Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install.  This should work without any drama.
    Download and unzip the file.
    Go to the device manager and click on the smbus controller needing drivers.  Click on the driver tab.  Click on Update Driver.
    Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
    Make sure the Include Subfolders box is checked and the driver should install.  Then reboot.
    Attachments:
    SMBus.zip ‏88 KB

  • Windows 7 pro drivers for my pavilion a1710n

    I just upgraded my pavilion a1710n from xp to 7 pro.  Does anyone know where I can get drivers for my system?  HP support doesnt have drivers for win 7.

    Please use;
    nForce Driver Version 15.49 for Chipset, SATA, and Ethernet
    GeForce 307.83 Driver for Graphics
    Realtek High Definition Audio Codec for High Def Audio (Check "Accept", click "Next" and select download location for 2nd item down the list)
    All other drivers should be native to Windows 7 or available via Windows Update.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Drivers for burning CDs

    Help needed!
    A message that registry settings for Drivers for importing & burning CDs & DVDs is missing appears when opening iTunes.
    As advised by the error message I re-installed V 10.6.1.7 (from fresh download) but still get the same message.
    iTunes does read CDs but will not burn one.
    Ran diagnostics for CD/DVD drive tests. Not sure how to attach them to this question.
    Thanks
    BroughtonRd

    Refer to this article:
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299

  • Can not find drivers for keyboard!!!

    why can i not find drivers for my wireless keyboard (model:gm322aa, product: gm322aa)? I need the drivers for windows 7 64-bit.

    Hi, I am attaching the site to assist you with your keyboard.  Hope this helps.
    http://h10025.www1.hp.com/ewfrf/wc/product?product=3454478&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
    Was your question answered? Mark it as an Accepted Solution!
    If I was able to help...Give it a Kudos!
    Thank you

Maybe you are looking for

  • Program to be tested in Quality client

    Hi Testing your development programs in quality systems without transporting them physically. Plz provide pointer for the same. An  approach how to create that instance in Qc will also be appreciated. cheers Mohinder Singh Chauhan

  • K7T Turbo2 - how do I tell BIOS to boot from USB?

    I have an old K7T Turbo2 system, and I'm trying to install Windows 7 on it.  I guess that's my first question - am I going to run into any nasty problems running W7 on this board, other than RAM limitations?  I have a version of "Tiny7" (which instal

  • Can Photoshop CS3 Metadata Be Configured To Identify Camera?

    My metadata panel gives Camera Data (EXIF) details but does not identify the make and model of the camera. A few years ago I am sure I was able to see the identity of the camera. At the time I was using Photoshop Elements 2 and iPhoto 4, together wit

  • Color calibration problems on mac pro

    I have a bunch of quicktimes I captured via firewire from a 1200a deck. These quicktimes I converted to Quicktime PNG via compressor so they could be opened on a PC as well. When I open the exact same quicktime file on PC it appears much brighter tha

  • P6N Diamond X-Fi Xtreme, back audio jack not working after windows reinstall

    Hi everyone, I've been having a problem with audio since reinstalling windows. Previously under windows xp sp3 i had no issues but after the most recent reinstall of windows xp, the rear jacks for the audio aren't working despite the front headphones