Navigating images forward failed with OneDrive

Hi,
Navigating images forward failed with OneDrive and the following error was displayed by Windows 8.1:
"Sorry, something went wrong, please try again"

Hi,
Regarding this OneDrive error here, please wait for a while and recheck it.
And consider seek help in the following forum for OneDrive support:
http://answers.microsoft.com/en-us/onedrive/forum
Besides, take a look at the following articles to see if it could help:
Troubleshoot
OneDrive sync problems
Best regards
Michael Shao
TechNet Community Support

Similar Messages

Image Upload fails with Error 407: Proxy Authentication Required

Hello,
I am trying to upload Custom Template Image, however it fails with error :(407) Proxy Authentication Required message. i would have to admit that i am trying this behind a Proxy Firewall. So i do really need to know how to make this work and
what is that i need to request from the Proxy team to make this working.
Thanks
TSANA

Hello TP,
Your Suggestion really helped and the upload is working. However because of the bandwidth being low, its showing 2 days. Is there any other approach to get around with this? I have also observed that, if we leave the upload over night , then it will
show that the Image upload failed with exception. I have managed to rerun the script(same script) in same window, and luckily it continues from where it had failed. This is somehow not a good thing that Microsoft did not provide an option of using Azure VM
as a template.
Thanks
Sundesh

Blu-ray image build fails with LPCM error

hello,
Using CS6 Encore
I have created H.264 files (.264, .264.Stereo1) for a 1:04hr sequence using Matrox
- 1920x1080p 23.98fps
- both 27.0 and 30.0 target data rate, Constant Bit Rate CABAC, H.264 level of 4.1
and when I try to build a Bluray image using them, the build fails with the message:
Error: "invalid format", Code: "14", Note: "Bits per Sample of LPCM is illegal. 32"
I first got this error using target data rate of 30 (default) - then I dropped it to 27.0 and still got the error.
I then tested with a 1min H.264 file created using the same above settings and the image was successfully created.
In CS5.5, when I had similar errors, I dropped the target data rate to 27.0/27.1 and the build would complete without errors.
I can't find any discussion of the above error on the web or on these forums - perhaps my search terms were not good.
Any help would be greatly appreciated.
I was able to successfully build another 1hr blu-ray image with default settings (target data rate 30) a few days back.
In both successful and unsuccessful cases,the source sequence is a 1920x1080i 29.97fps Matrox AVI file, which I convert to 1920x1080p 23.98 fps in AME using Matrox to create the .264/.264.Stereo1 files, which I then import into CS6 Encore and create the image.
Encore CS5.5 was a pain in that it would hang on source files larger than 2GB - I came across a Adobe forum/support thread suggesting using the workaround of importing to the Encore timeline files <= 2GB in size.
-Nanda
-Nanda

Thanks Ramesh.
Both the 1min and the 1hr .Stereo1 WAV files show the same 32-bit bit depth as per MediaInfo.
General
Complete name                            : R:\Plano_Jul20_2012_264.stereo1.wav
Format                                   : Wave
File size                                : 1.30 GiB
Duration                                 : 1h 0mn
Overall bit rate mode                    : Constant
Overall bit rate                         : 3 072 Kbps
Audio
ID                                       : 0
Format                                   : PCM
Format settings, Endianness              : Little
Codec ID                                 : 1
Duration                                 : 1h 0mn
Bit rate mode                            : Constant
Bit rate                                 : 3 072 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 48.0 KHz
Bit depth                                : 32 bits
Stream size                              : 1.30 GiB (100%)
General
Complete name                            : R:\Plano_Jul20_2012_1min_264.stereo1.wav
Format                                   : Wave
File size                                : 22.0 MiB
Duration                                 : 1mn 0s
Overall bit rate mode                    : Constant
Overall bit rate                         : 3 073 Kbps
Audio
ID                                       : 0
Format                                   : PCM
Format settings, Endianness              : Little
Codec ID                                 : 1
Duration                                 : 1mn 0s
Bit rate mode                            : Constant
Bit rate                                 : 3 072 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 48.0 KHz
Bit depth                                : 32 bits
Stream size                              : 22.0 MiB (100%)

Quicktime Pro 7 Image Sequence Fail with Leopard

This was a previous topic which has been archived. I want to reopen it.
I recently upgraded from OS 10.5 to Leopard 10.6.6. I installed Quicktime Pro 7, which worked without issue before in 10.5.
Now, I can no longer import an image sequence to create time-lapse. It just has a black screen.
This is a known issue....is there a fix?

Im stuck with the same issue, maybe my sizing isn't right?
I can only highlight 1 image at a time.. and sometimes it 'kind of' works if i scrub through, but when i save or export its just black..
Plz help! I have a huge project this week and i really need this!

Bridge Image Process fails with Lumix GF-2

We are unable to get image processor in Bridge to allow us to make raw image processing changes to our GF-2 images. Instead
of opening in Camera Raw Processor, it just opens the images. How can we change this?

No Actions are running; neither CS 5 or 6 work with the Lumix. When I drag or double click in Bridge, the camera raw processor opens and processes allowing me the option of making processing adjustments; but I cannot get the script to run by using (Bridge) Tool>Photoshop>ImageProcessor on multiple prints from Lumix. This is the message I get and there are no prints in the designated destination folder.

Jsp:forward failed with 'Response already committed'

I got a "Response already commited" error when using logic:forward or jsp:forward inside a JSP page fragment that is part of a Struts Tiles layout.
Here is the code fragment included in the layout.jsp.
<%@ taglib uri="/WEB-INF/struts-logic.tld" prefix="logic" %>
<logic:notPresent name="user" scope="session">
<logic:forward name="login" />
</logic:notPresent>
Here is the error message:
[ServletException in:/WEB-INF/tiles/verifyLogin.jsp] Exception forwarding for name login: java.lang.IllegalStateException: Cannot forward. Response already committed. (Servlet 2.3, SRV 8.4)'

Jsp normally buffers output in a 8k buffer and write it to the output stream (i.e. "commits") it when:
1) it is explicitly flushed
2) the buffer overflow
3) an jsp include is invoked
My code is in a layout.jsp file which is referenced in a tiles-definition. The tiles definition is tiles:inserted in a top-level jsp file. I am not sure if tiles uses jsp:include or if there is a way to get jsp:foward to work in the layout.jsp.

Windows 8 backup (Win7 File Recovery system image) creation to NAS device fails with error 0x807800C5

Hi,
I have a ZyXEL NSA310 NAS device on my network that I use for backups (as well as a media server). I have been very happy with it as, amongst other things, it has a gigabit Ethernet connection. I recently upgraded my home laptop from Win7 Pro to Win8
Pro. Under Win7 the NAS device worked perfectly as the backup target. I could back up file sets and - most importantly to me - create a system image on the device should I need to restore the system in the event of a full disk failure.
When I upgraded to Win8 it kept the Win7 settings and it looked like it was just going to work, then as it came to create the system image it failed with error code 0x807800C5 and message "The version does not support this version of the file format".
I have searched the internet and seen that others have had similar issues on Win7 and Win8 with NAS devices where they have had to hack the device to get it working - though it isn't clear that this has been successful for everyone. This isn't an option
for me as the NSA310 is a closed device and in any event I don't see why I should have to hack the device when clearly this is a Win8 issue (since Win7 worked perfectly).
Does anyone have any ideas how to fix this issue so that I can create the full backups I require?
Thanks,
Phil
Event Log messages:
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          13/01/2013 23:14:52
Event ID:      517
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Home-Laptop
Description:
The backup operation that started at '‎2013‎-‎01‎-‎13T23:13:43.523158000Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a
solution, and then rerun the backup operation once the issue is resolved.
Log Name:      Application
Source:        Windows Backup
Date:          13/01/2013 23:14:56
Event ID:      4104
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Home-Laptop
Description:
The backup was not successful. The error is: There was a failure in preparing the backup image of one of the volumes in the backup set. (0x807800C5).

Thanks willis! I will look into the iSCSI route. A quick Google search and I can see some mention of the NSA310 and iSCSI so maybe it does support it.
One question: Have you ever attempted to restore a system image from a NAS iSCSI device with a Win8 Restore Disk? Is it easy? I just want to be sure that it is possible to do so in case the worst happens and I need to restore the entire image onto a
new disk.
Hopefully Microsoft will fix the issue with the standard NAS setup with an update in the future, but I don't want to wait for it.
Thanks again,
Phil
Hi Phil, No I have not had to do this yet, but I see no reason why it shouldn't work as the iSCSI disk looks just like a regular hard disk to the OS. I agree that Microsoft should fix the direct NAS support as the iSCSI approach does have the downside
of dedicating a fixed chunk of your NAS drive to the iSCSI disk that you have to choose when you create the disk whereas the direct NAS just uses the actual space currently needed by the backup. Also I had some trouble getting authentication (access rights)
to work so I left the iSCSI portal as open access - which is OK for a home solution but not a good idea in general. I will revisit this for my own setup and see if I can get it working but just wanted to mention it in case you have the same issue. It manifests
itself as not being able to connect to the iSCSI portal due to failed authentication when running iSCSI initiator setup.
-willis

HT201210 I tried to do an update to the Ios 5 but it failed tried to restore my iphone however all im left with is an image of itunes with a usb connector please help as my phone will no longer work!!

Hi I tried to do an update on my Iphone 4 hardware but it failed (dont knoyw why) I followed instructions to restore my Iphone unfortunatel all im left with is an image of itunes with a usb and a dead phone can someone help???

Hey, I aggree with Tempelton for the most part, but if you are an advanced user on the computer on the phone, there is one thing you can try. There is a program called RecBoot, which might help you, and here is a page that might help you. http://jaxov.com/2010/05/recboot-iphone-recovery-mode/ If you are not an advanced user, I would NOT recomend using RecBoot, and just proceeding with the restore. A little consolation could be that you probably had Photo Stream on, and you might have been backing up to iCloud, which should mean you'll have some stuff after the resote. Sorry this happened!

Imaging failed with error 175

We recently updated all of our servers with the new ZDM7NWSP1IR4HP1. We distributed the zenworks update through our zenworks for servers so we downloaded the CPK files. Updates were successful except now we have lost our reimage on next boot functionality on all servers. We get the message "imaging failed with error 175". We downloaded and tried the Zenworks Imaging Driver Update for October 2009. We tried this on one server in our environment that we use for testing purposes. This did not fix the problem.
Can anyone help us? We don't see anything additional on the support site to patch.

Originally Posted by spond
Busytech710,
could you please
1) boot to ZENworks maintenance mode
2) export DEVELOPER_LOG=a
3) perform the imaging task and send me the imglog
spond at novell dot com
Shaun Pond
I will be glad to try this and send you the log. I too tried installing the service pack with winsetup.exe and found that also worked for me as far as making image on next boot work. We really want the CPK method to work as we have so many servers and we were able to update them all in one day versus weeks using winsetup.exe. I'll respond back with info you need as soon as possible.

Solaris boot images fail with bad magic number

hi guys, have had Solaris on boxes for allmost 10 years. I have never installed sol10, and I have a problem
1. I download the zip file, then use winrar to unzip them..
2. burt the image with nero 7
when my SunBlade 1000 comes up I do the Stop-A, and from the Ok promt
I do boot cdrom
this fails with "bad magic number" I have redown loaded it and reburnt it with nero reinstalled
and also changed out the DVD on SunBlade
3 I found a copy of Solaris 8 and the I got back a 'bitch' where is Solaris 9 so, most likely the drive is OK
HELP
Cris Harrison

Hello Cris,
unfortunately I don't understand your last sentence !
I found a copy of Solaris 8 and the I got back a '*****' where is Solaris 9 so, most likely the drive is OK
If this was a Solaris 8 (7/01 or later) DVD that did successfully boot, your DVD drive firmware (assuming that this is the Sun Toshiba SD-M1401) is up-to-date. If the DVD drive has firmware 1007, an update to 1009 is required to boot from DVD. otherwise you won't be able to boot from DVD (boot from CD works and a DVD can be automounted/mounted).
Partial output of probe-scsi
Before update:
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011007
After update:
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011009
[*Patch 111649-04 - Toshiba DVD 1401 firmware update*|http://sunsolve.sun.com/search/advsearch.do?collection=PATCH&type=collections&queryKey5=111649&toDocument=yes]
when my SunBlade 1000 comes up I do the Stop-A, and from the Ok promt ...
Instead of trying to directly boot, disable auto-boot and retry after a clean power-on.
Break with Stop-A
setenv auto-boot? false
reset-all
boot cdrom
Michael

Zenworks imaging failed with error:200

We just got new PC's and when I try to use ZENworks 6.5 to put my image
on them, I get "ZENworks imaging failed with error:200"
I have not been able to find anything in the KB for this.
The PCs are Gateway E-4500D, ZENworks is 6.5 running on NetWare 6.5 SP 4a.
TIA

We are on SP2 and getting the error code: 200 error. The PC's are DC5100
Small form factor. They have SATA drives. Some work and some get this
error, reboot and then start the image restore, but never gets to the
Pre-Formatting. Any ideas?
> On Tue, 18 Jul 2006 14:32:30 GMT, Rhonda Richardson wrote:
>
> > No. We are on SP1. Sorry, forgot that part.
>
> could you try sp2?
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
> Live BootCd and USB Disk from Mike Charles
> http://forge.novell.com/modules/xfmod/project/?imagingx
> eZie http://forge.novell.com/modules/xfmod/project/?ezie
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

CCMSetup failed with error code 0xc0000142 on newly imaged machines

I've run into some curious errors when installing clients on newly imaged machines. After machines are deployed and joined to the domain, we run a Startup Script from AD that looks for the existence of the client and if not installs it.
The newly imaged machines all display these errors in ccmsetup.log
Installing file 'C:\windows\ccmsetup\vcredist_x86.exe' with options '/q /norestart /c:"msiexec /i vc_red.msi /qn REBOOT=ReallySuppress" /msioptions "REBOOT=ReallySuppress"'.
File 'C:\windows\ccmsetup\vcredist_x86.exe' returned failure exit code 3221225794. Fail the installation.
InstallFromManifest failed 0xc0000142
A Fallback Status Point has not been specified. Message with STATEID='311' will not be sent.
Deleted file C:\windows\ccmsetup\ccmsetup.xml
CcmSetup failed with error code 0xc0000142
If I reboot the systems one more time after these failures, the setup continues and succeeds in every case. Has anyone run into this before?
Orange County District Attorney

Does the machine have a pending reboot before installing the client?
Edit: just to add you could enable verbose logging on a freshly imaged machine.
Then look the the windows installer log file for the re distributable that fails to install.
If you search for "return value 3" in the log file, just above should be the reason it fails.
You can enable verbose logging for all MSI files with
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer]
"Logging"="voicewarmup"
vcredist_x86.exe always has 1 or 2 MSI's embedded depending on which redist it is.
The log should be in Windows\Temp if running under the system account or %appdata% for the account that's running the script.

TM Backup failed with error: 11 - when copying Movie, image, music files

TM giving backup errors (for a long time unsolved until I read forum entry about monitoring events with Console prog.) Recently upgraded from 10.5.4 to 10.5.6 with Combo package (attempts at upgrade to 10.5.5 failed with "unknown error")
I narrowed down to the file types listed by excluding relevant erring folders. TM backup works OK now but without Movies, Photos, Music and small number of applications that appear to fail mainly on copying an image within appl.
Using Console with "backupd" filter on LOG FILES/system.log (while executing TM backup) gives the following 4 samples of errors:
1. Dec 21 02:20:03 Macintosh /System/Library/CoreServices/backupd[1627]: Starting standard backup
Dec 21 02:20:05 Macintosh /System/Library/CoreServices/backupd[1627]: Backing up to: /Volumes/MacBook Backup/Backups.backupdb
Dec 21 02:20:06 Macintosh /System/Library/CoreServices/backupd[1627]: Event store UUIDs don't match for volume: Macintosh HD
Dec 21 02:20:06 Macintosh /System/Library/CoreServices/backupd[1627]: No pre-backup thinning needed: 64.44 GB requested (including padding), 129.33 GB available
Dec 21 02:22:31 Macintosh /System/Library/CoreServices/backupd[1627]: Error: (-36) SrcErr:YES Copying /Users/xxxxx/Movies/iMovie Events.localized/New Event 07-04-2008 2/clip-2008-04-07 11;30;45.mov to (null)
Dec 21 02:22:32 Macintosh /System/Library/CoreServices/backupd[1627]: Error: (-36) SrcErr:NO Copying /Users/xxxxx/Movies/iMovie Events.localized/New Event 07-04-2008 2/clip-2008-04-07 11;30;45.mov to /Volumes/MacBook Backup/Backups.backupdb/............
2. Dec 21 02:25:23 Macintosh /System/Library/CoreServices/backupd[1627]: Starting standard backup
Dec 21 02:25:23 Macintosh /System/Library/CoreServices/backupd[1627]: Backing up to: /Volumes/MacBook Backup/Backups.backupdb
Dec 21 02:25:24 Macintosh /System/Library/CoreServices/backupd[1627]: Event store UUIDs don't match for volume: Macintosh HD
Dec 21 02:25:24 Macintosh /System/Library/CoreServices/backupd[1627]: No pre-backup thinning needed: 64.44 GB requested (including padding), 126.79 GB available
Dec 21 02:27:46 Macintosh /System/Library/CoreServices/backupd[1627]: Error: (-36) SrcErr:YES Copying /Users/xxxxx/Music/iTunes/iTunes Music/Duck Baker, Maggie Boyle and Ben Paley/The Expatriate Game--Traditional Irish & American Music/07 Rye Whiskey.m4a to (null)
3.Dec 21 13:17:28 Macintosh /System/Library/CoreServices/backupd[1768]: No pre-backup thinning needed: 6.26 GB requested (including padding), 120.05 GB available
Dec 21 13:21:11 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/StockXloader.app/Contents/Resources/StockXloaderName.tif to (null)
Dec 21 13:22:03 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/Stox.app/Contents/MacOS/Stox to (null)
Dec 21 13:22:31 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/Stox.app/Contents/Resources/help/Stox Manual_files/image002.png to (null)
Dec 21 13:23:07 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/Stox.app/Contents/Resources/help/Stox Manual_files/image033.png to (null)
Dec 21 13:23:31 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/Stox.app/Contents/Resources/help/Stox Manual_files/image060.png to (null)
Dec 21 13:24:09 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/Stox.app/Contents/Resources/help/Stox Manual_files/image120.png to (null)
Dec 21 13:27:29 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Unproven /EyeTV.app/Contents/MacOS/EyeTV to (null)
Dec 21 13:27:53 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Unproven /EyeTV.app/Contents/Resources/authopen to (null)
Dec 21 13:28:17 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Unproven /EyeTV.app/Contents/Resources/Device Pictures/CinergyDTXS.png to (null)
Dec 21 13:28:42 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Unproven /EyeTV.app/Contents/Resources/Device Pictures/CinergyTExpress.fscaled.png to (null)
Dec 21 13:29:07 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Unproven /EyeTV.app/Contents/Resources/Device Pictures/ElgatoDiversity.fscaled.png to (null)
4. Dec 21 14:44:46 Macintosh /System/Library/CoreServices/backupd[1858]: Starting standard backup
Dec 21 14:44:48 Macintosh /System/Library/CoreServices/backupd[1858]: Backing up to: /Volumes/MacBook Backup/Backups.backupdb
Dec 21 14:45:50 Macintosh /System/Library/CoreServices/backupd[1858]: No pre-backup thinning needed: 2.11 GB requested (including padding), 116.67 GB available
Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Error: (-36) SrcErr:YES Copying /Applications/iWork '08/Keynote.app/Contents/Frameworks/BGCompatibility.framework/Versions/A/BGComp atibility to (null)
Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Error: (-36) SrcErr:NO Copying /Applications/iWork '08/Keynote.app/Contents/Frameworks/BGCompatibility.framework/Versions/A/BGComp atibility to /Volumes/MacBook Backup/Backups.backupdb/xxxxxxx’s MacBook/2008-12-21-131514.inProgress/58F99FC2-7474-42C9-8DCA-5C99F724CE6E/Macin tosh HD/Applications/iWork '08/Keynote.app/Contents/Frameworks/BGCompatibility.framework/Versions/A
Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Stopping backup.
Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Error: (-8062) SrcErr:NO Copying /Applications/iWork '08/Keynote.app/Contents/Frameworks/BGCompatibility.framework/Versions/A/BGComp atibility to /Volumes/MacBook Backup/Backups.backupdb/xxxxxx’s MacBook/2008-12-21-131514.inProgress/58F99FC2-7474-42C9-8DCA-5C99F724CE6E/Macin tosh HD/Applications/iWork '08/Keynote.app/Contents/Frameworks/BGCompatibility.framework/Versions/A
Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Copied 52 files (26.7 MB) from volume Macintosh HD.
Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Copy stage failed with error:11
Dec 21 14:46:24 Macintosh /System/Library/CoreServices/backupd[1858]: Backup failed with error: 11

solongpc wrote:
Regardless if this is a general problem or not, does anyone know of any documentation/release notes for common/generic TM error codes? That would be helpful.
Yeah, many of us would love it! But no such thing exists, at least not that us mere mortals can find.
There might be another variable that I don't understand right now but at least it is consistent.
Could it be something funky in the name of one of the folders? Or could the folder object itself be corrupt? Or have some odd extended attribute?
All I can suggest is calling AppleCare, and/or reporting it as a bug:
*_Submitting a +Bug Report+ to Apple._*
|
This requires a membership in the +Apple Developer Connection,+ but you can get one for free.
Register here: http://developer.apple.com/programs/start/register/create.php
Once you receive the confirmation, go to: https://bugreport.apple.com and login.
Click +New Problem+ at the top.
Click Help at the top, and/or any of the items underlined in blue for more information.
Provide as much specific detail as possible, and attach a log, screenshot, etc., as appropriate in the lower section.
When done, click Submit at the bottom.

FAILED with error NT_STATUS_NO_SUCH_USER

Setup:
OS X Server 10.3.9. PDC. ALL clients are a combination of XP and W2K. No macs (sadly).
Situation:
Over the last 3 years I've been plagued with this problem. Symptoms include new authentications are not granted access, but existing connections suffer no degradation of service. The simple solution has been to simply go into Server Admin and "Restart Service" on the Windows service. Done and done. However, this can happen anywhere from once a week to (up to) 3 times a day. Even on weekends when (likely) no one is in the building, though some users may not log out of their workstations - let alone shut down.
Troubleshooting:
1) I set the smbd logs to 1 (debug) and at the point of degrading, I only see this:
***** Begin: I changed nothing; I left out nothing ***********************
[2008/04/14 10:54:09, 1] authods.c:opendirectory_authuser(208)
User "bvolz" authenticated successfully with "dsAuthMethodStandard:dsAuthSMBNTKey"
[2008/04/14 10:54:09, 2] authods.c:opendirectory_smb_pwd_checkntlmv1(424)
opendirectorysmb_pwd_checkntlmv1: [-14071]opendirectoryuser_sessionkey
[2008/04/14 10:54:09, 2] /SourceCache/samba/samba-60.5/samba/source/auth/auth.c:checkntlmpassword(305)
checkntlmpassword: authentication for user [bvolz] -> [bvolz] -> [bvolz] succeeded
[2008/04/14 10:54:10, 1] /SourceCache/samba/samba-60.5/samba/source/smbd/service.c:close_cnum(841)
volzsql (192.168.0.3) closed connection to service Shared
[2008/04/14 10:54:11, 0] pdbods.c:getrecords(1015)
dsGetRecordEntry error (-14085)odssam_getsampwnam: [-14085]getsam_recordattributes dsRecTypeStandard:Users no account for 'jpiper'!
[2008/04/14 10:54:11, 2] /SourceCache/samba/samba-60.5/samba/source/auth/auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [jpiper] -> [jpiper] FAILED with error NTSTATUS_NO_SUCHUSER
***** End: I changed nothing; I left out nothing ***********************
2) Recently, I tried to change the default allowed connections per KB Article: http://docs.info.apple.com/article.html?artnum=107899 but that actually only seemed to exacerbate the problem. Today I removed the directories that were added in Netinfo Manager from the KB.
3) I also looked at the nmbd.log and frequently see this, which is equally as troubling:
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:sync_withdmb(154)
syncwithdmb:
Initiating sync with domain master browser VOLZSERVER<20> at IP 65.16.245.50 for workgroup VOLZINC
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:announce_local_master_browser_to_domain_masterbrowser(110)
announcelocal_master_browser_to_domain_masterbrowser:
We are both a domain and a local master browser for workgroup VOLZINC. Do not announce to ourselves.
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:sync_withdmb(154)
syncwithdmb:
Initiating sync with domain master browser VOLZSERVER<20> at IP 65.16.245.50 for workgroup VOLZINC
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:27, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:announce_local_master_browser_to_domain_masterbrowser(110)
announcelocal_master_browser_to_domain_masterbrowser:
We are both a domain and a local master browser for workgroup VOLZINC. Do not announce to ourselves.
This type of activity in the log is repeated over and over and over again.
Question:
How do I make it stop? Ok, to be fair, I've searched for the last few years for a solution and I'm not sure why samba is continuing to 'break.' Is there someone here that can enlighten me or poke me in the right direction to why this could be happening? I know little to nothing about samba. I DO know networking, and this could be the issue. The server was handed to me by the previous admin and so to rebuild (the easy solution) isn't so easy because the previous admin didn't document anything he did to build it, like NAT forwarding and such, which, if I don't put back into it, will cause MANY headaches. So, eventually I WILL rebuild from scratch (the time may be nigh), and I think it may fix a misconfiguration, but I fear it will be difficult. This is our production server with no test environment (other than using SuperDuper! to image the drive and play with it over a weekend or something).
Plea:
For help.
Edit: How do I suppress the wiki markup? It's butchering the posted log excerpts. <nowiki></nowiki> doesn't seem to work.

Turns out a printer driver installed on an XP (even W2K(?)) was (apparently?) flooding the OS X SMB server to the point of collapse. Uninstalling the "HP Tools" part of the driver cleared it up. The printer is an HP LJ1300. I had downloaded the full driver from HP.com. I don't know if any/all these conditions need to be matched, but: the printer was on the network using an HP print server JetDirect EX Plus, and the computer(s) in question were connecting directly to it (not via a print server). It's been too long ago, but there were always several errors in the System Log (Win XP Event Viewer) that correlated with the errors on the OS X server.
Proud to say that since that day (10+ months ago) I've not seen it happen again. whew.

Jabber call to voice mail fails with fast busy over VPN

I have an issue that I ran into with CIPC phones over a VPN. If a CIPC phone called over a VPN and started ringing a phone the call would fail with fast busy at the time the call would be forwarded to voicemail. I found the issue was when remote the CIPC phone would negotiate the g.729 codec, when forwarded to a voicemail pilot over a SIP trunk set to g.711 the call would fail due to codec missmatch when no transcoders are present.
So now I am running into what I believe to be the same issue with Jabber, when on premise the calls to voice mail work just fine, but when remote they fail. I can directly call the voicemail pilot without error, but if calling a phone the call gets fast busy at the point we are forwarded to voicemail. Even though all my regions are set to talk to all other regions on G.711 and the voicemail SIP trunk is set to G.711, I believe with the new features in CUCM9 that a lower speed codec has been negotiated since the we are going over the VPN, or Jabber has done this as it knows it's over VPN (not sure). WIth CIPC I could go into the settings and turn off the Optimize for Bandwidth check box and the call would negotiate G.711. With Jabber I can't find anything that would tell my Jabber client to stay on G.711 and I can only imagine this is a codec missmatch as the following are true.
1. CIPC and Jabber share the same line
2. VPN established and CIPC optimised for low bandwidth un-checked
3. Over the same VPN the CIPC phone can leave a voicemail
4. Over the same VPN the Jabber client gets fast busy once forwarded to voicemail
5. Voicemail environment is Exchange-UM over SIP trunk
6. SIP trunk is assigned a Device Pool, that is assigned to a region that all other regions communicate G.711 to
7. On CIPC if optimised for low bandwidth is checked I get the exact same issue as I get with the Jabber client (fast busy when forwarded to voicemail)
Would anyone know what I can do in CUCM 9 to fix this issue, as said no issue when all devices are on premise. Wondering if there is a service parameter or a way to change the codec selection so the Jabber client attempts to always negotiate G.711. The correct answer would be to get some PVDM DSP resources and kick up a transcoder in my resource group, and that may be what I talk them into doing if I have no other options.

We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year! Every time I call in to report it they 'escalate' the issue but it never gets resolved. The problem seems to be in the initial connection. Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal. I get the same message when I call back: “I’m sorry – that account is in use at this time. Please try again later!” I have even called in with my cell phone and get the same message! I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later. If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.” This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!! I wonder how many people have the problem and just don’t bother reporting it because of the hassle? When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!! NEVER let them talk you into that!!! It’s their problem and they need to fix it!!!!!!! I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract! Good luck if you have Verizon………

Navigating images forward failed with OneDrive

Similar Messages

Maybe you are looking for