NB305 - FN key no longer working with Flash Cards

I acquired my NB305 last week, and the FN key was working such that when you held it down the Flash Card appeared at the top of my screen. However, that association has since ceased. The FN does work for other purposes, and I turned on the feature with the Flash Cards to allow the mouse cursor to activate them. so both the key itself and the Flash Cards are working, but not together.
I have searched high and low and I can find no way to reassociate the key and the Flash Cards. This forum is my last hope for solving this riddle. I did search the board, but I could find no reference to this problem.
Any assistance you may be able to provide is very much appreciated,
-Neil

start menu> all programs> toshiba> utitilies>settings for flash cards. when the window comes up check the box for allow the mouse to bring up the cards. also make sure the box next to keep the cards on top of other windows so they alway show up where you can see them if you have other programs open. when you have problems bringing them up with the FN key try the same thing as before but instead of settings for flash cards select reset flash cards
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Similar Messages

Function keys no longer working with a new keyboard...

I got a new keyboard and my function keys no longer work with it. I am used to have them used in the standard format, i.e. F10-F12 control the voume, etc. I have the "Use all f1,f2, etc." button clicked. I have also tried restarting my computer. Any thoughts?

Try doing a SMC reset and PRAM reset.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

Letter keys don't work with Flash.

The letter and number keys on my keyboard don't work when i'm playing Flash games. The arrow keys, shifts, spacebar, etc. all work, but the first letter or number that I press gets stuck down (functions like I was holding it down) for ~ 10 seconds, and then none of them work after that(even once that key is no longer acting as if it was held down).

So i just had this exact same problem and worked for hours to find the answer. Space and arrow keys worked, but letters only worked one time. I bought a Lenovo Laptop that came with the program "GuardedID" pre-installed on it. It functions as a decoder for the keys when using flash based games and other things. So when i pressed the key for the first time on the games it would act as a number instead of letters, therefore making it not work. I searched on Lenovo's website in their forums and found the answer to be "delete GuardedID" It has an error in the program. I deleted it and my keys worked immediately in flash games. So if you have a program called "GuardedID" the answer will be to delete it. or if you have a similar program that changes your keys to a different code while on the internet, you need to get rid of it.

Using windows XP. After replacing a bad keyboard apple special keys no longer work with Boot Camp 3.2

My Original keyboard (MB110LL/A) was damaged. I recieved a new keyboard (MB110LL/B) from the Apple Store online. Now none of the special Apple keys, volume up, volume down, eject, etc. work anymore. I have Boot Camp 3.3 installed on Windows XP. Boot Camp 3.3 requires Windows 7. I cannot get a replacement (MB110LL/A) keyboard anywhere.

Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

Control key no longer works after update.

After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
This is left control key though. Right still works?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Return Key no longer works in sql windows or procedure editors.

The <return> key no longer works in my SqlDeveloper editors. Is there an easy fix? I tried resetting the Option for the carriage return but it did not change anything.

So if you go to your shortcut keys (Tools > Preferences > Shortcut Keys) and search for "Enter", what commands are associated with the Enter shortcut? If you have tried remapping the Enter key to something else, it may have removed the standard association with the "Insert New Line" command.
You can reset to the default (which should fix the problem, but lose any custom shortcuts) with More Actions (top right) > Load Keyboard Scheme > Default.
theFurryOne

Backlit keys no longer working...

After recent SMC? firmware auto update, my backlit keys no longer work.
When I try to turn them on (dim/bright) via keyboard shortcut keys, I get a circle with a slash thru it on the on-screen keyboard logo...

NeoTranc3 wrote:
Hah, Im not sure but I may have the opposite to your problem. I'm here in a very dark room, so the back light comes one, but *I am watching videos* so I'm not touching the laptop. The keys would go dark until I touched the laptop again or that is what I thought. Now the back light comes on randomly. I'm going to have to research this keyboard to see what sets it off.
It occurs to me that you're getting a light show based on overall brightness fluctuations in the program content of your DVD! Do the keys light up when a dark scene is on the screen? Then go off once the light level in the flick goes back up?
Take your Apple-branded black cleaning cloth and drape it over the iSight camera, which is where the ambient light sensor is. Sort of like playing peek-a-boo with the MB! (We have a 2 1/2-year-old daughter [not MacBook]). Great way to test the KB backlight (which we didn't get ourselves, BTW).
''86

Menu key no longer working

Since I first used my Nike+ with my ipod a few weeks ago the menu key no longer works.
Can anyone help please. I use my ipod all the time and im desperate for it to work again

mdcoley wrote:
Cheers! Store is now working. I didn't quite do things in your order as your post came in after I started experimenting. This is what I did:
Three-finger reset again.
Installed the .sisx file above (cwrt core).
Installed the Nokia Store from Betalabs (with Qt 4.7.4).
Read your post, so deleted those two files you mentioned from installated apps.
Installed earlier version of Nokia Store from your link.
Ran this, which prompted me to upgrade.
Can now log in without the black screen.
It seems remarkable that doing a factory reset means the phone doesn't work.
That's the question;Nokia advise to never do a 3 finger hard reset.this process delete some files that isn't recoverable even reinstall software.
I have a C7 as well and already perform a 3 finger hard reset,but a software reinstall put it back as 2out of the box".don't know why this do not works in Nokia 701
At least you have the store back again right?
As far as i know it should be missing in your phone,the photo and video editor right?
That's why i took mine to Nokia Care Center,they put the phone as out of the box.
Nokia Lumia 820
Nokia 701

10.8.4 Screen Brightness Keys No Longer Work

I ran updates this morning and I assume it updated to 10.8.4 from the app store updates tab.
After this update and booting back up the screen brightness keys no longer work. F1 and F2 keys do nothing and they worked fine before the update.
Anyone else experiencing this? If so know a way to fix it?
Thanks
Patrick

I have been having the same issue and even with updates have continued to have the problem. I was able to find a chck box under the keyboard settings that I never noticed before. When checked it only allows you to use the function keys on the top of the keyboard when pressing the fn (function) key. Simply unchecking this (not sure how it got checked in the first place) solved the issue immediately.

Firefox doesn't work with flash ubuntu

At first Firefox wouldn't work with flash videos. Now whenever I try to go to YouTube, it crashes. Whenever I try to view a video on break.com, it crashes. I have no idea how to get flash working in FF. It works in Opera, but not Firefox.
I am currently running the latest version of Ubuntu.
== URL of affected sites ==
http://www.break.com
== User Agent ==
Opera/9.80 (X11; Linux x86_64; U; en) Presto/2.2.15 Version/10.10

Adobe flash + firefox + youtbue worked great for me a few days ago, on ubunutu jaunty.
Then upgraded to firefox 3.6.7 last night, and youtube no longer works, just get a black rectangle; right-click does not bring up the usual adobe menus. The plugins dialog shows adobe flash 10.1.53 and the 'prefered applications' dialog shows adobe flash for application/x-swf & etc. mimetypes.

DW CS4 shift+arrow keys no longer work?

I use Dreamweaver a fair amount. Just recently when I want to
highlight a bunch of code while in code view, the shift + Arrow
keys no longer work. The first letter is highlighted, but as I
press the arrow a second time nothing is highlighted. This problem
is only in Dreamweaver (CS4) and not any other application. I can't
shift+UpArrow as an example.
This is something I do ALL the time while coding and now it
just stopped working.
I looked at the Keyboard Shortcuts and all the Shift+ArrowKey
are still listed so it's not that.
I looked at the Preferences and can't see anything that looks
wrong.
I have rebooted and still this issue persists.
This is ONLY in Dreamweaver and in fact only in Code view
window. If I Split the screen OR use Design view, in the design
window I can use shift+Arrow to highlight text as normal.
Any ideas????

I just saw your answer. I looked in my preferences in the Library and there is a shortcut folder, but it is totally empty. I have a funny feeling either the patch I ran from Adobe knocked it out or running "Carbon Copy" to copy one drive to the other knocked it out.
I'm wondering if there is any way I can grab a copy of this folder from somewhere else and put it back into my system. I'm on a Mac so it would have to be compatible with a Mac running Tiger.

Xdotool doesn't work with flash videos

Hi,
I don't know if it's a bug or not, but xdotool doesn't seems to work with flash videos.
For example open the page http://www.miniclip.com/games/bloxorz and start the game, the left key should now move the bloc to the left.
Open a terminal and type `sleep 5; xdotool key Left ', then come back to the game.
Nothing happens.
Is there a workaround to do xdotool work with the flash videos?
I already tried with different web browsers, different flash plugins, but this works nowhere.
Thank you
Fractal

Hello,
I have a button in the frame 1 of my proyector file in order
to go to the frame 2.
the code:
titreA1_btn.addEventListener(MouseEvent.MOUSE_DOWN,aller1);
function aller1(e:MouseEvent){gotoAndPlay(2),trace("dd")};
it works.
next I have a buton in my frame 2 in order to go to the frame
1 like this:
sommaire.addEventListener(MouseEvent.MOUSE_DOWN,allersommaire);
function allersommaire(e:MouseEvent){gotoAndPlay(1)};
When I return to the frame 1 , this button doesn't work and I
have this message:
TypeError: Error #1009
With flash 9, I don´t have this problem.
Sorry with my english, I m french.
Thank you.

F-secure key - no longer working

F-secure key - no longer working on ipad or iphone, crashes once password entered.?

I am using iOS 8.4 on iPad and iPhone. I have windows 10 installed on my pc. There are 39 passwords stored.
I have version 3.3.101 installed on the PC
If I sync the pc with either the iPhone or iPad and then enter the password f secure key crashes ,

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

NB305 - FN key no longer working with Flash Cards

Similar Messages

Maybe you are looking for