Nearly full, but....
Hi
This week I had apple care replace a bad hard drive. Fortunately i had a good complete back up on time machine. But I now notice that although I have 336gb on my hard drive, backed up to the time machine, (Imac) and I have approx 34g backed up from my macbook to TM, the time machine says 850gb is on time machine with only 150gb available.
How can these two backups account for so much space? Seems like there is something else on the TM but I can only see two "sparsebundle: files; one for each computer.
I understand the incremental back up....but now that I have restored the hard drive, there is only incremental back ups for several days on the Imac. More for the laptop, but I only have 30 some gig on that being backed up. I guess what I am saying is that a ton of space is being used on Time Capsule but with only several days back up of 300 GB plus some back up of a small laptop it shouldn't come to 820 GB being used on the Time capsule....No, don't use Windows virtualization programs or Entourage.
Similar Messages
-
Hey!
I have a 32gb iPhone 5S, updated to 8.1.3. I keep getting pop-up alerts that my phone storage is nearly full, but when I go to Settings>General>Usage it claims I've used 12.4gb and have 14.4gb available. Any music that I've bought and downloaded from iTunes through my phone has been erased, put into the cloud, and can only be streamed on wifi.
Unfortunately, my Mac's harddrive died recently, so I don't have a way to sync my iPhone until I purchase a new desktop.
Any suggestions on what might be going on? Thanks!If you go to Settings > General > Usage check both the "Storage" section which has Used, Available, and Manage Storage and immediately below that is the iCloud section which has Total Storage, Available, and Manage Storage. I'm guessing that the alert you are getting is referring to your iCloud storage. If so, the following may help: Manage your iCloud storage - Apple Support
-
My iCloud storage is very nearly full but i can't find out how to manage it!
I keep recieving an e-mail saying that my icloud backup is almost full but i have no idea how to manage this. I don't want to purchase more back up, is there a way of managing it?
Welcome to the Apple Community.
settings > iCloud > storage & backup > manage... -
Info on hard drives says its nearly full, but I have next to nothing on a new hard drive.
When I ask for info on my hard drive, it says that the disk is nearly full. I just had the hard drive replaced and there is hardly anthing on it. If I ask for info on each individual folder it only adds up to about 30 gigs. I don't see anywhere a big folder or file. The hard drive is 465.44 GB. It thinks I've used 463.5 GB.
Do you have any other drives connected to your computer? Please post what you find checking Get Info as I posted earlier.
Select your drive's Desktop icon. Press COMMAND-I to open the Get Info window. Press COMMAND-SHIFT-4. Your cursor will turn into a crosshairs. Use it to select the part of the upper panel that displays the disk information. When you release the mouse button it will be automatically saved to your Desktop.
Reply to this post an upload the image by clicking on the Camera icon in the composer's toolbar.
Meanwhile, you can boot from your Leopard installer DVD and repair your hard drive:
Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
My hard drive is nearly full but I cant find whats taking up all my hard drive space
I have an intel macbook pro with 500 internal HD.
I have 160gb of music in my itues folder with another 7gb on a previous library, I am unable to find the size info of my applications folder but I susspect it to be around 50gb, however I only have 59 gb of free HD space remaining. How to I find out what is using the remainder od my hard drive space? I have not yet checked my iphoto. where would this be? Is there someway of checking to see what folders are the bigest on my hard drive?
I can's work out why my disk is so full.
Any help greatly appreciated. :-)MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro -
Hard Drive nearly full, but can't see why.
Hi there,
I've got a 2009 iMac (4Gb RAM, 500Gb HDD) running 10.8.5. I got a Finder warning about the Hard drive space this morning saying I only had 400Mb left. Which is very strange, because most working files are kept on my machine, but copied back to a file server, and trashed from my mac.
After some trashing of bits and bobs, I managed to get to about 60Gb free (so at least the mac could function properly whilst i was doing some investigative work.
I did a "get info" on each of the folders in my user account (including the hidden 'Library' folder). Counted up to about 85Gb. I then did the same for the system folder - Apps, System, and Library - which came to 34Gb. That's a total of 119Gb (which is about what I would have guessed).
So there's about 320Gb of hard drive space that's being eaten up, but I can't see where. I have been doing some heavy work in iBooks Author, so I opened up the iBA files and deleted the previous versions. Won back a bit of space, but not a dent really. I think the local snapshot versions are actually pretty small.
Thinking that it had to be an issue with some bloated hidden file, I used Terminal to show hidden files, and tried to use the 'Find' facility to search for files over 1Gb; there were a few, but none hidden, and none i didn't already know about.
I don have TIme Machine, but that's set up for an external HDD, so that's not the issue.
Any ideas what I can try next?Hi Eric – Thanks for the reply. Forgot to mention that I checked out the storage in 'About this mac'. Here's the shot.
As you can see, backups are pretty much at zero, so assuming that the 'backups' section comprises previous 'versions' of files, (local snapshots), then theoretically these are ruled out too.
I've downloaded OmniDiskSweeper (thanks for the link), and ran it, which is where things get really wonky. I left it for ages. I presume it had finished scanning, as it gives no progression bar or 'finished' dialogue box. Check out the screenshot.
Check out OmniDiskSweeper's data. The 'User' folder is the largest (unsurprisingly) at 75Gb, but that is only what I thought it would be. Check out the total amount scanned (at the top of the window). 102Gb. 102. Yet, there's there 'Get info' box on the left, saying I've got 418 Gb used on the hard drive.
The system thinks that there's more data on the HDD than OmniDiskSweeper. I'm suspecting that there's a corruption somewhere. I tried a 'light' clean of my system cache (using MountainLionCacheCleaner), and did a safe boot to clear some caches, but no result.
Next, I'm going to create a new User to see if the issue is within the User account or system-specific. Then I'm going to start up CarbonCopyCloner to see what that reports. Back in touch soon. -
Hard says it is near full but it should not be
Hi all
My mac is stating that I have around 269 gig of movie in it. When I search for movies I find only 4 movies. Where it is telling me this is click on the apple in the top left corner, about this mac, more information, storage. Where my hard drive is listed it tells me I have 269 gig of movie when I do not. Can someone help me with my storage issue. I have recently just deleted all my podcasts and no change.First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal. -
IDisk is nearly full, but more than 1 GB cannot be located...
Is it possible I have ended up with a large fragmented file that has become "invisible"?
Is there a way to check for, or locate file fragments and defrag an iDisk?
Otherwise, is it possible to reinstall that feature on my MacBook Pro?
Will be away most of the day -
Will check later for a response.
Thanks.
MacBook Pro Mac OS X (10.4.8) Weaning from Windows XPWelcome to Apple Discussions.
There is a forum for iDisk users located here and an iDisk FAQ list here. -
My itunes capacity bar is nearly full but ipod empty
I have just updated to Itunes 8 and then when i plugged my ipod touch in to update it the capacity bar in itunes has turned all orange and has also wiped all the songs from my touch. A message then appears saying there is not enough space to sync (even though ipod is empty).
Have tried to sync manually to no avail and have also reset the ipod.
Any ideas how i can fix this problem?You might get a quicker answer to this by posting in the iPod Touch forum where other users might have some experience they can share: Discussions - Connecting iPod Touch to Windows
-
Time Machine does not cope well with nearly-full disk
Although Time Machine is supposed to delete old backups when the disk fills up, under some circumstances it does not cope well with a disk-full condition.
Hardware: iMac (mid 2007)
OS: Mac OS X version 10.6.8 (Snow Leopard)
Processor: 2.8 GHz Intel Core 2 Duo
Memory: 2 GB 667 MHz DDR2 SDRAM
The other day I noticed that I had not had a successful Time Machine backup in over a day. Backups were taking a long time to run (4 hours or more), during which time the backup disk was chattering constantly and the disk showed "Estimating index time" in the Spotlight menu (even though I had excluded the disk from Spotlight indexing). When the disk finally stopped chattering, the backup finished with no visible errors but Time Machine continued to state that the last successful backup was yesterday. The backup disk was nearly full, but I had assumed that Time Machine was designed to cope with this situation by deleting old backups.
A complete annotated log file of the incident and my observations can be found here: http://bentopress.com/backup.log.zip
Here are some of the interesting entries from the system.log file:
Sep 7 16:22:14 Bento-iMac com.apple.backupd[56515]: Starting standard backup
Sep 7 16:22:14 Bento-iMac com.apple.backupd[56515]: Backing up to: /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:23:07 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 137.2 MB available
Sep 7 16:25:49 Bento-iMac com.apple.backupd[56515]: Copied 32984 files (23.7 MB) from volume iMac HD.
Sep 7 16:25:53 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 108.4 MB available
Sep 7 16:25:57 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
Sep 7 16:25:58 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:25:58 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk
Sep 7 16:25:59 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:00 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
Sep 7 16:26:00 Bento-iMac mds[45]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/My Backup Disk" because it is low on disk space.
Sep 7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Reindexing /Volumes/My Backup Disk/.Spotlight-V100/Store-V1/Stores/35367D91-8096-4D43-802B-A8658DBAB581 because no basetime was found.
Sep 7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:04 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:14 Bento-iMac com.apple.backupd[56515]: Error: Flushing index to disk returned an error: 0
Sep 7 16:26:14 Bento-iMac com.apple.backupd[56515]: Copied 776 files (17.3 MB) from volume iMac HD.
Sep 7 16:26:15 Bento-iMac com.apple.backupd[56515]: Backup canceled.
Note the "error: 0". Error code zero normally indicates success.
There were also many, many, many copies of the following message, which occurred while Spotlight was trying to index the backup disk:
Sep 7 17:28:40 Bento-iMac com.apple.backupd[58064]: Waiting for index to be ready (100)
Here's what I think is happening: at the very end of the backup, after the files have been copied to the backup disk, mds resets indexing because the disk is now full. backupd's attempt to flush the index to disk then fails because indexing is suspended (error zero), so the backup is canceled. I suspect that this may occur when the new backup and the old one(s) being deleted are both small enough that the disk "packs" tightly, leaving no room for the index. If a large (>500MB) old backup had been deleted to make room for a small (<100MB) new one, the problem would not have occurred.
I worked around the problem by switching Time Machine from the full disk to my Time Capsule. (I did not have this system backing up to the Time Capsule originally because I purchased the Time Capsule later for a different system.) The downside of this is that I lost access to older backups (though they are still accessible by right-clicking on Time Machine in the dock and selecting "Browse other Time Machine disks..."—however, I have not actually tried this). I'm also not completely happy having both my main systems backing up to the same hardware, but everything seems to be working well at this point and I do have a secondary backup system, using SuperDuper to clone the systems' disks to an external HD, which I do about once a month.
Although I have worked around the problem, I am posting this in the hope that it will be useful to someone else, in the hope that someone at Apple will notice and perhaps improve the performance of Time Machine in this situation, and also in the hope that someone can suggest a solution that does not involve throwing a bigger disk at the problem. Is there any way to free up space on Time Machine's backup disk, for example by manually pruning older backups, either through Time Machine itself or via the Finder or command line?If you suspect that the disk being full is the problem, have you tried deleting some of the old backup data on the TM disk?
When in TM, go back to the past a long way, right click on a file/directory and select "delete backup". Do this on some big files you have (so that you get more space per removal) that you change all the time (so you'll still have recent backups). -
I have a Macbook Pro that was slowing down. The HD was nearly full as I do a video work. I removed over 400gb of photos and video and it made no difference. I ran disk inventory x and that says that there is only 60gb on the hard drive but disk utility says there is still 430gb on the HD. How do I remove what DU says is still there.
ThanksYou may notice a difference in available space statistics between Disk Utility, Finder, and Get Info inspectors. This is expected and can be safely ignored. The Finder displays the available space on the disk without accounting for the local snapshots, because local snapshots will surrender their disk space if needed.
About Time Machine's "local snapshots" on portable Macs -
I just dumped thousands of emails from my icloud storage, as it was full. That was about 35 hours ago, I'm still not getting emails. I'm no where near full now....how long before I will get emails again?
Does anyone have an answer to this problem? It's been 4 or 5 days now and iCloud still says I have 0kb of 5GB available, and 6.1GB of mail on iCloud. I guess that's better than yesterday when it said I had 8.3GB of mail. Does anyone know if it simply takes Apple a week to actually empty a mailbox?
thanks in advance, hopefully tomorrow it says I have only 4GB of non-existent mail and I can start using it again... -
Lost Photos but Memory nearly full, Can't access them?
My IPhone 4s was fixed a while back (broken screen) and I lost a lot of pictures, I have just connected to I tunes and tried to see if I could retrieve them but no luck, My photo & Camera memory is registering as being 11.6GB full but I have emptied the pictures could this be my missing pictures if so how can I retrieve them, I have tried through my phone and connecting to the computer Itunes etc but I cant seem to access what is taking up this memory. Many thanks for any help.
My IPhone 4s was fixed a while back (broken screen) and I lost a lot of pictures, I have just connected to I tunes and tried to see if I could retrieve them but no luck, My photo & Camera memory is registering as being 11.6GB full but I have emptied the pictures could this be my missing pictures if so how can I retrieve them, I have tried through my phone and connecting to the computer Itunes etc but I cant seem to access what is taking up this memory. Many thanks for any help.
-
I am getting a message that my 250 gb hard drive is nearly full. I have deleted many files without making much difference. I am unable to update any software now. I have a 500 GB drive that was used for Time Machine but is now available to use. I have cleared the data from it, now how do I make this drive available to the system?
You can't.
Move some more data to that other drive to free up space on the startup drive.
Don't forget to empty the Trash. -
The internal hard drive on my early 2009 24" iMac is nearly full. I have already worked to free as much space on the HD as possible. How do I add an external HD and have the iMac read it as though it was part of the internal HD. I know about external HD for additional storage and I do have an external HD, but, it is so much easier to search the drive when it is internal than having to perform a search on the internal drive and then a search on the external drives. And, it is easier to save files to an internal drive so that I don't have to decide which external drive to use to save files. In other words, I want to add an external HD and have it function as though I had purchased a larger internal HD.
That is simply not possible. Every drive is a separate device. It cannot be used to extend an internal drive as though you had a seamlessly larger drive.
What you can do is to create a striped RAID array using the internal drive and an external drive. However, doing this will erase the internal drive and you will lose everything on the internal drive. Furthermore, installing Lion or Mountain Lion becomes a bit of a problem because you cannot create a Recovery HD on a RAID and this tends to make the installer choke. However, you can clone an existing Lion or Mountain Lion system to the RAID and designate the RAID as a startup volume.
I would not recommend the RAID solution, personally, but there are many who do. I prefer the basic solution of spending the money on a larger internal hard drive instead of an external hard drive.
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server: Hardware and Service Comparison.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons. Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?
Maybe you are looking for
-
Update Library of a person using same music files but different login
I use iTunes with Windows. The songs are saved in "my files". I am using Windows XP Verion 5.1 My wife uses also iTunes on the same computer but with a different login. When I add files to iTunes my library is up to date but not hers. What can I do?
-
How can I get PSE 13 to print correct size and center photo?
I have MAC, Artisan 1430 printer, PSE 13. Recently upgraded from PSE 10 (never had a problem printing). I input the size paper, size image, paper type, etc. (as I would with PSE 10) and the same parameters for printer, but image does not print corr
-
What i can do,i lost my ipad in plane and seems at cannot get back?
Hi,how i can clode ipad and empty all information?
-
Outbound TO to 916 and shortage (RF related)
Hello, We are confirming the TO (source storage type to 916) using RF and laterly while PGI, guys found that there is a shortage but TO has already confirmed and we can not change the outbound delivery's picked qty. Please suggest, how to carry forwa
-
Hi I am new to Solution Manager. can any one you could kindly help me out with some notes / PDF's on Solution manager Thanks in advance. Srini