Neccesary to include Function group in Transport Request?

Hi,
I had changed a Function module logic slightly and wants to trasport it to the production.
But in the transport request the object present are only FM and nothing else.
Once there was a big problem beacuase i had trasnsported only FM and not the Function group associated with the FM.
So i should add the Function group to the trasport request in which the modified FM was included? Or is it OK?
Raj

Hi Raj,
U should also Include that F.G. along with modified F.M.
Hope it will help u.
pls reward if helpful.

Similar Messages

  • How to include Logo created to transport request?

    Hi guys,
    How to include Logo created to transport request?
    I have created a logo via se78 and i want to incldue in the transport. How?
    Thanks!

    Hi,
    In Se78 select the logo and click on the truck button..then it will prompt for TR..
    Regards,
    Omkaram.

  • Include table entries into Transport Request manually @ SM31

    Hi All,
    I have an issues reg table maintenance at SM31.
    We have a Z Table and I can add entries at SM31 to that table. But:
    System has not asked Transport request while saving the data (after additions to the table)
    Option to include in Transport Request manually is not available @ menu -> Edit -> Transport -> Include in request. Include in Request is not highlighted to select here.
    Pls help me the process to add my table entries into a Transport Request.
    Thank you
    Chandu

    Hi,
    seems like your table is defined as Application table (master and transaction data).
    Check SE11 to be sure
    Database table: enter name > Display > Delivery & Maintenance
    Delivery Class > is this A?
    If so then there is no transport and it can be maintained in all systems.
    You could try if required to create manual transport via SE01.
    Programm ID: R3TR
    Object: TDAT 
    Objectname: your table name
    Regards
    Hein

  • Including objects in a transporte request

    Dear Gurus,
    I have two questions:
    1) I tried to include objects manually in a transport request because I had to delete them from another request where they did not belong. I copied in a notepad the Program Id, Object Type and Object name in order to use thes values in a new request created for this purpose. But when I went to the new task and put the Program ID, Object Type and Object Name and pressed 'Enter', the line recently filled with these values disappears. I have not found a way to register the required object in this way.
    2) Then I tried to do the following thing: I went to the customizing (formulas and requirements) and modified the corresponding objects in order to trigger a suggestion of a new Transport Request. I saved my changes in the new requets. Then I went to SE10 in order to check the request task, but I found that the program Id and Object Type are totally different to what I have copied in the notepad before deleting object from task... Is this ok, or did I do something wrong?
    Thank you very much for your answer in advance,
    Regards
    Dominik Ley
    Chile

    Hi,
    Please check the below link for changing the objects in the sytem other then from its original system.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/5b/2f7faca70911d2850b0000e8a57770/frameset.htm
    You can try this.
    Use a different userid and try to save the same object in the system. I hope it should ask for the transport request and the task wll be of REPAIR type.
    Regards,
    Naveen

  • Function Module for Transport Request

    Hi All ,
    Is there any function Module that can be used to fetch Transport Request Details like.
    1. Objects Contained in TR.
    2. Objects Types
    3. Created BY
    4. Status of TR (Released / Modifiable).
    Any pointer will be appreciated.
    Thanks & Regards,
    Rohit Garg

    We have different tables which can provide you this data...why do u expect function module..
    E070 => Change & Transport System: Header of Requests/Tasks
    E071 => Change & Transport System: Object Entries of Requests/Tasks
    E07T => Change & Transport System: Short Texts for Requests/Tasks

  • Function module not in Function group after transport

    We have a function group ZPCAD with three function modules in it. I added two  function modules. When they were transported, the function group in the target client did not show the function modules
    I found the program in SE80 Repository info System. when I opened the Module got a message about funtion group being damaged.
    Since then, we have:
    transported the modules again. that did not help
    transported the Function group, that did not help
    Transport all function modules (old and new), that did not help.
    I went to SE37, opened the module and pressed Control, Shift, F5. The function group ZPCAD was opened indicating the module is part of the group. However, the new function modules still were not listed in the group.
    Any advice would be appreciated.
    Scott

    Some time function modules will not be displayed in function group in target systems.
    Goto SE80
    Select the function group from the list box and search for the function group.
    Right click on the functio group and select "Other Functions" and "Rebuild Object List" from the sub menu of "Other Functions".
    After doing all these, function modules will be displayed in function group.
    Regards,
    Siva.

  • Including reports to a transport request using a report

    Hello,
    I have a set of programs nearlu 450. I have to include all these programs into a single Transport Request number.
    I wanted to write a program for this.
    Can any one give me suggessions to do this.
    Good suggessions will be appreciated through points
    Thanks in advance.
    Best Regards,
    Sasidhar Reddy Matli.

    Hi Sashi
    Have a look at Report-TH_TKANL and below FMs
    TRINT_INSERT_NEW_COMM / TRINT_MODIFY_COMM/TRINT_ORDER_CHOICE and TRINT_APPEND_TO_COMM_ARRAYS
    Kindly reward points if helpful
    Thanks & Regards
    LK

  • ECC6 -  Include in Program and Transport Request

    Hi
    In ECC6 when I write a subroutine it is creating separate include , then how it is taken care of in the transport request? Do I need to keep track of all the includes that get created this way in the request??
    Thanks in advance..
    Sameer

    Hi sameer,
       When you create a subroutine, (By double clicking on the subroutine name), the pop up will be checked by default with a new include name.
    You can over ride that include by selecting the same program in that pop up.
    But, even if you create one include for each subroutine, they would all be in the same request. That is taken care of by the system. You don't need to worry in any case.
    Regards,
    Ravi

  • How to include a table into transport request

    Hello,
    please, i want to export 2 tables into a request order, then i will import this order on an other system; is it possible?
    how please?
    Regards

    Hi,
    In that case it will help you
    http://searchsap.techtarget.com/tip/How-to-transport-table-entries
    Regards,

  • Problem facing Transport of function group...

    Hi,
    I am trying to import function group from Development to Quality but I am facing problems.
    The Main program (Function pool) associated with Function group gets transported but not the function group.
    To transport Function group , I am going to se80 -> Edit object -> Function group name. Then it asks me for transport request.
    Now this new transport reuqest consists of function group texts and report name.
    After this transport request is released and moved to Q40, I find that only main program of function gorup is actually transported and not the function group.
    Please help me.
    Regards,
    Tushar.

    Hi Rajesh
    Please do the following steps to include your Function group into transport request,
    1) Go to SE09 and place the cursor on your request
    2) Go to 1st Menu option, Then to the option "Include Object" --> Freely selected objects
    3) There you select the option "Freely selected objects"
    4) For type "FUGR", give your function group name and then execute.
    5) Now Select the option "Save in Request".
    Cheers
    ~ Ranganath

  • Transport Function Group

    Hi,
    I created a new function group and assigned a function module to it. I transported the function group and function module (available in 1 request) from Dev to QA with no warnings/errors. In QA, i went to SE37, typed my FM name and tried to goto function group using the goto menu option, it says function group does not exist. It prompts for creating a function group.
    In dev, when i tried to save the function group to a request, this entrry was saved in the request/task.
    Function Group Texts -  LIMU  -  FUGT - ZSLS_FGRP
    I don't have any specific entry for function group in the request. Is there a way to capture function group entry in the request.
    Thanks

    Hi,
    When u create a new function group and assign the function module for the first time, you can see only the function group name in Transport Request but the function module name will not get displayed.
    Check the entries of object in to ensure the function group has been assigned to the request in Transport Request.
    If you are creating other Function modules after first transport you can find the function modules names also in transport request.
    Cheers,
    Rema.

  • Putting a function group on a transport

    Is there an easy way to put a function group, or all objects in a development class onto a transport?
    I have seen someone do it in the past but cannot remember how they did it.
    We have a problem with a transport which is giving some strange errors.
    Many Thanks
    David

    Hi david,
    1. Is there an easy way to put a function group
    The normal way is the easy way.
    2. ie.
       Just SAVE once again ANY function module
       of that group (without changing any code)
    3. It will ask for a new request.
    4. That request, is your request.
    <b>5. FMs are never transported separatedly,
      the WHOLE BUNCH of FMs
      (ie, THE FULL FUNCTION GROUP)
      is transported.</b>
    regards,
    amit m.

  • Which version of an object is included in a transport request

    Hi experts,
    I have one doubt regarding the transport requests and the object versions included in it.
    We've found in one development that there are differences between the development system and the productive system and all the transport requests, which include this object, have been transported to production.
    The transport requests were transported in the following sequence:
    Order number    Date            Time
    1. D01K904477  29.03.2007 17:41:52
    2. D01K904511  30.03.2007 17:21:54
    3. D01K904425  30.03.2007 17:51:36
    The last order transported contains a previous version of the object.
    From my own experience in other projects I'm not sure whether the transport system it's well configured or not.  I have the idea that the transport requests always include the last version of the object transported.  Probably, it depends on the transport routes... But I'm not sure.
    Any help would be highly appreciated.

    Thank you for your answer Juan.
    This is clear. But my doubt is not solved yet.
    I'm referring to the versions included in an older transport request. 
    In our system If we transport a previous transport request to production, the latest version of the object is overwritten.
    E.g.:
    TR  1    Date: 01/01/2007  (DD/MM/YYYY)  First version of the program
    TR  2    Date: 01/03/2007  (DD/MM/YYYY)  Second version of the program
    1. We transport TR 1 to production.
    2. We transport TR 2 to production.  We have the last version of the program in production.
    3. If we create transport request TR 3 and we include the object in this TR, this TR will include the active version of the object.
    4. If we transport TR 1  to production, latest version is overwritten.  <b><<<< This happens in our system.</b>
    We don't know if this is happenning due to the transport routes configuration.
    Thanks in advance.

  • Including transport request while modifying the custom table

    Hello Experts,
    I have a scnerio like, I have to insert/modify some records in my custom table. Now we want that these records should come under a transport request, so that we can track which records are for which user.
    I am developing a report and including a parameter for transport request in the selection screen. So the report will take TR number directly from selection screen, but how to include it for the records inserted.
    Regards,
    Harjeet

    Hello Altaf,
    I think you did'nt understood my issue. I am not using and transaction. I am creating a report program which inserts new entries into my custom table based on the flat file on my presentation server.
    Now I want these entries to be inside a transport request which is there in the selection screen.
    Hope this gives the clear idea of my specification.
    Regards,
    Harjeet

  • Is there a way to see the details of transport request files

    hello friends
    for some reason when I try to create a package with objects like function group and function modules, I am not able to import the function modules on the other server.
    So i would like to see if the transport request files that I have created (K900226.EC1 and R900226.EC1) has these modules included in them.
    Is there a way that I can see what objects are included in the released transport request files.
    Your help will be greatly appreciated.
    Thanks
    Ram

    Hi Ram,
    You can see the objects included in a transport request by going to se09 and opening your transport request and drill down to the task and below the task you would have all the objects that are included in the tranport. You can also use se03 to get the details by drilling down the tansport request.
    The problem with importing the function module might be because either the function module or the function group may not be active which may cause the tranport to fail. please check if both are active or not.

Maybe you are looking for

  • Crystal Report Formula French Salutation

    I have this code below I'm not sure why it is nto running properly.  WHen i run each separately, they all work but for some reason when i put them together in a longer formula If IsNull({GfCnBio.GfCnBio_Spouse_ID}) and {GfCnBio.GfCnBio_Key_Indicator}

  • Disable search Query Logging by powershell

    Hello, Could anyone advise how to disable Query Logging for sharepoint 2010 search service application by powershell? I found only option to check status ($searchapp.QueryLoggingEnabled) but I can not find any way to disable query logging. Thanks in

  • Portal with Flash

    Hi, I'm currently developing a Flash portlet, which is dynamically populated using ColdFusion. Within the portlet, I want to have links to an external application, and when the user clicks on the link, I want it to launch SSO. After login, I want the

  • R7970 Lightning is dying?

    So I have a R7970 LTG on a waterblock and I'm getting 50c at stock with no load (one 240 and one 360). Pretty odd to have such high temps at stock huh? I occasionally see that my screen derps and whatever image on the screen moves down and then back

  • Issues when installing SAP IK FP1 and FP2

    Hi all, has anybody installed the SAP IK 3.0 FP1 and FP2? If so, after installing it, were you able to load the cmc page and infoview page in internet explorer. I get an error when typying the url: Estado HTTP 404 - /PartnerPlatformService/service/ap