Need a count for number of emails

Hi,
I need a count of emails coming to a mailbox in a specified date range. And i want that to be exported in an excel file.
I was able to get the total count in a specified folder using the below cmdlet in PS but couldn't get during a specific time/date range:
Get-Mailbox | Get-MailboxFolderStatistics | Where {$_.Name -match “Inbox|Sent Items|Deleted Items|Junk E-Mail”} | Select Identity, Name, ItemsInFolder | Export-csv c:\MailboxItemCount.csv
Can the process be automated? As in, can i get the report generated day, week or
month wise?
Any help would be much appreciated.

You would have to use Outlook or EWS for that.
EWS calls can be scheduled. Outlook will not run correctly without a full user interface and running under the scheduler is not supported.
https://msdn.microsoft.com/en-us/library/office/dn535506%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
https://msdn.microsoft.com/en-us/library/office/dd633710(v=exchg.80).aspx
¯\_(ツ)_/¯

Similar Messages

Creating a Counter for number of records

Hi Folks,
I need to show number of purchase orders, quotation items and purchase requisitions in one report. i need to count the number of RFQs and purchase requisitions per purchase order.
I have put numeric 1 in update rules but it shows value 1 even if the number of PR is 2. and getting.
I want to show the same number irrespective of Analysis (even if the anlysis changes from PO to cost center.)
I saw one How to Document on counter some time ago in sdn its not there now.
Please send a reply for this requirement. Its urgent
Can Anyone forward it to me.
Regards
Mahesh

The document you are looking for can be found at the following link:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7e58e690-0201-0010-fd85-a2f29a41c7af">How to... Count the occurrences of a characteristic relative to one or more other characteristics</a>.
Hope this helps...
Bob

Need to count the number of times the Basic Finish data chages

HI Expertes,
I have a requirement I need to count number of times the Basic finish date chaged for PM work order. I went throug our forums I got some info like using a standard function module
CHANGEDOCUMENT_READ_HDRS_ONLY
CHANGEDOCUMENT_READ_HEADERS
CHANGEDOCUMENT_READ_POSITIONS
But all the above function module will not be suitable for my requirement since CHANGEDOCUMENT_READ_HDRS_ONLY it gives whole changes but my requirement is just need number of changes occurred in Basic Finish date but CHANGEDOCUMENT_READ_POSITIONS can give the filed number which has been changed but still I need change id.
So kindly suggest me wether there is any other Standard FM to get number of changes occurred in Basic Finish date?
Thanks,
Rajesh

Hi Debbie,
     To count the number of groups please try the folling steps:
1) Create a formula @reset and place this formula in the page header
    whileprintingrecords;
    numbervar i:=0;
2) Create another formula @evalgroup place this in the group header where you want to count the values.
    whileprintingrecords;
    numbervar i:= i+1;
3) Create another formula @display and place this in report footer.
    whileprintingrecords;
    numbervar i;
In order to display the count of details which are printing in the detail section place the eval formula in the detail section and the @display formula in the group footer.
Hope this helps!!!
Regards,
Vinay

Need to count the number of groups in a Crystal Reports 2008 report

I have created a report with three levels of grouping. There are several items in each level. I want to count the number of groups. I have tried countdistinct but it counts the number of items in the lowest level of grouping and I want the number of items in the higher levels. This is a distribution data base. I have the data grouped by date, by truck on each date, and by "run" or load on each truck on each date. I want to count the total number of groups of truck and run, which is the second level of the grouping. Any ideas? I am fairly new to Crystal.

Hi Debbie,
     To count the number of groups please try the folling steps:
1) Create a formula @reset and place this formula in the page header
    whileprintingrecords;
    numbervar i:=0;
2) Create another formula @evalgroup place this in the group header where you want to count the values.
    whileprintingrecords;
    numbervar i:= i+1;
3) Create another formula @display and place this in report footer.
    whileprintingrecords;
    numbervar i;
In order to display the count of details which are printing in the detail section place the eval formula in the detail section and the @display formula in the group footer.
Hope this helps!!!
Regards,
Vinay

I need a counter for my os 9.2 web site

I have been using Adobe PageMill 3 for my web page using OS 9.2.2 on my Mac Mini 1.25GHz.
I have downloaded several counter scripts, but none work, can someone suggest one for me?

I seem to recall Pagemill having a "Goodies" folder (or something like that). Perhaps they included a counter in the collection.
Gary

CR 8.5, I need to count the number ordered and the number on back order

- - Crystal Reports 8.5 - -
I have two fields.
Qty Shipped and Qty Backordered.
I want to calculate the percentage of orders shipped.
Something like:
Count ({CIT_PT_RO_Fulfillment;1.QtyShip}) > 0
Count ({CIT_PT_RO_Fulfillment;1.QtyBackorder}) > 0
But I know these aren't correct as they return the value of True...
Then I'll take those two fields and calculate the percentage shipped...
Can someone help me with this?
Thanks
Kelvin

Hi Kelvin,
Try this.
Add the count of field1 with field 2, you will get total number of orders.
Then you can write below formula to calculate the percent.
number ordered / total number of orders * 100.
Hope it helps.
Thanks,
Sumit Kanhe

(Repost) CR 8.5 I need to count the number or records 0

- - Crystal Reports 8.5 - -
I have two fields.
Qty Shipped and Qty Backordered.
I want to calculate the percentage of orders shipped.
Something like:
Count ({CIT_PT_RO_Fulfillment;1.QtyShip}) > 0
Count ({CIT_PT_RO_Fulfillment;1.QtyBackorder}) > 0
But I know these aren't correct as they return the value of True...
Then I'll take those two fields and calculate the percentage shipped...
Can someone help me with this?
Thanks
Kelvin

Try this
if count({CIT_PT_RO_Fulfillment;1.QtyShip})>0 then
((Count ({CIT_PT_RO_Fulfillment;1.QtyShip})-Count ({CIT_PT_RO_Fulfillment;1.QtyBackorder}))/Count ({CIT_PT_RO_Fulfillment;1.QtyShip})*100
Regards,
Raghavendra

PowerShell Exchange 2007 Question To count up the total number of email addresses (view/hidden) per GAL

Hello All:
I am very new to Power Shell and need some help:
I have 224 GAL's on our Exchange System (Ex 2007) where, I need to count the total number of email addresses/display names assigned to each GAL. I am not sure how to set up a for-next loop in PowerShell. I am not sure how to set a input
file/variable, with the names of each GAL. (GAL is Global Address List)
I think it's $GALLIST = 'NameofGal1, NameofGal2, etc thru to NameofGaln' where n is the last GAL in the list.
So I need to now a command which would get all the gal names (Get-AddressList(?) for all the GAL's in the Exchange System and then pipe them into a function to count the number of email addresses.
In making a start with the following code and got stuck:
Get-Mailbox | Where {$_.GlobalAddressList -eq “GAL” -and $_.} | Select-Object Displayname, EmailAddresses, count
Missing or invalid property reference or expression.
At line:1 char:71
+ Get-Mailbox | Where {$_.GlobalAddressList -eq "GAL" -and $_.} <<<< | Select-Object Displayname, EmailAddresses, count
I think I know how to pipe the results to a csv file - with - Export-Csv -path c:\filename.csv - NoTypeInformation.
Please can someone advise. Please help.
Thanks in advance
PS - is there a way to access, read and display variable name and value which stores the number of email addresses/per GAL in exchange 2007 database so you don't have carry out a count exercise. Because this metadata will be in the Exchange DB?
Would this be easier to get?
Started building conditional statement:
Get-Mailbox | Where {$_.GlobalAddressList -eq "GAL" AND {{HiddenFromAddressListsEnabled -eq $True} OR {HiddenFromAddressListsEnabled -eq $False}} |
If {{HiddenFromAddressListsEnabled -eq $True} | Select-Object Displayname, EmailAddresses, count ELSE {HiddenFromAddressListsEnabled -eq $False}} | Select-Object Displayname, EmailAddresses, count
ENDIF
Export-Csv -path c:\test.csv -NoTypeInformation
Will this work? Checking to see how to do a for-next loop.
$GAL = Get-GlobalAddressList
foreach($GAL IN $GAL)
Get-Mailbox | Where {$_.GlobalAddressList -eq $GAL AND {{HiddenFromAddressListsEnabled -eq $True} OR {HiddenFromAddressListsEnabled -eq $False}} |
If {{HiddenFromAddressListsEnabled -eq $True} | Select-Object Displayname, EmailAddresses, count AS "Count of Hidden Addresses" ELSE {HiddenFromAddressListsEnabled -eq $False}} | Select-Object Displayname, EmailAddresses, count AS "Count of
Visible Addresses" |
Export-Csv -path c:\test.csv -NoTypeInformation |
not sure if this works and looks spaghetti -like!

Hi Everton,
In addition, If you want to export GlobalAddressList, please refer to the script below:
$filter = (Get-GlobalAddressList 'Default Global Address List').RecipientFilter
#filter HiddenFromAddressListsEnabled is ture
Get-Recipient -RecipientPreviewFilter $filter | Where-Object {$_.HiddenFromAddressListsEnabled -eq $ture} | Select-Object Name,PrimarySmtpAddress
#filter HiddenFromAddressListsEnabled is false
Get-Recipient -RecipientPreviewFilter $filter | Where-Object {$_.HiddenFromAddressListsEnabled -eq $false} | Select-Object Name,PrimarySmtpAddress
Refer to:
How to Export the Exchange 2010 Default Global Address List (GAL)
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I count the number of *'s in a string?

I need to count the number of * in a string of carakters. And the return the number. 0 for no *'s in the string 2 for two *'s in the string and so on.
It's probably quite simple but I can't figure out how!

Like this.
james_t_dk wrote in message
news:[email protected]..
> I need to count the number of * in a string of carakters. And the
> return the number. 0 for no *'s in the string 2 for two *'s in the
> string and so on.
>
> It's probably quite simple but I can't figure out how!
[Attachment Untitled 10.vi, see below]
Attachments:
Untitled_10.vi ‏18 KB

Can i count the number of Mondays in a specific month with a formula?

Hi
I am looking for a streamlined way of calculating an amount to invoice for a job that I am paid for weekly, but for which I invoice monthly, meaning that I am invoicing different amounts each month, depending on how many Mondays fall in a given month (i.e. 4 or 5).
So I am wondering if there is a function I can use to calculate the number of Mondays in a given month automatically and then I can use this value to multiply by my weekly charge to calculate the amount to invoice each month.
Thanks
Nick

Responses below apply to my earlier post.
nick_harambee wrote:
1. What part of the formula do I need to change to do the same for other days of the week, and for other years?
No change for other years, as the full date is entered.
I haven't looked at changes necessary to the version above to show results for other days. See below for a new table that does all days.
2. Would it be possible to construct one table with the calendar for a whole year, which would generate a count for each day of the week, which I could then use as and when needed? Or would it make more sense to construct a separate table for each day of the week (as I am referring to in question 1)?
Depends what information you need.
If you need the count for only one week day, then a table showing only the count for that day of week will avoid having to search it out.
If you need the number of occurrences of each weekday in each month, then a table showing those, with or without an attached calendar, is in order.
Here's one that shows the count of each weekday for each month. It uses two formulas, derived from the earlier posts by Yvan and Jerry:
B1: =DATE($A,COLUMN()-1,1)
B2: =IF(AND(DAY(EOMONTH(B$1,0))>28,MOD(WEEKDAY(EOMONTH(B$1,0))+7-(ROW()-1),7)<(DAY( EOMONTH(B$1,0))-28)),5,4)
The formula in B1 is filled right to M1, and the cells are formatted to show only the Month and Year. Note that the cells actually contain Date and Time values, which are used in the second formula's calculations.
The formula in B2 is filled right to M2 and Down to M8.
Day names in column A are entered directly and are not used in the calculations.
The 4 digit year number is entered directly in A1. Change this number to change the year.
<img src="http://i963.photobucket.com/albums/ae116/Barry_images/iWork09screen/Countw eekdaysinMonth.png" border="0" alt="Count of weekdays in month(s)">
Conditional formatting is used to fill cells whose value is equal to 5 with a yellow background.
Regards,
Barry
Edit:
Direct address to image for use if not showing above.
http://i963.photobucket.com/albums/ae116/Barry_images/iWork09screen/Countweekday sinMonth.png
Message was edited by: Barry

Count the number of comments in a PDF file automatically?

Hello O Experts,
My documentation team members use Acrobat and Reader 8, and frequently need to count the number of comments in a PDF file. Is it possible to count the number of comments automatically? We can't find this functionality anywhere, and have to resort to manual counting. Since our PDFs can contain thousands of comments, this is very time-consuming. I've tried searching the Web and these forums, but the words "count" and "comments" are too frequent in other contexts to find anything useful...
Thanks and best regards,
--M.T.

Hi again sypark,
That is a great idea, and it works!
I would actually search on a more unique phrase - for instance, "Subject:" - that definitively occurs a single time per comment. The reason is:
There are many types of comments, not just sticky notes... you have highlights, text deletions, text insertions, replacement text, attachments, callouts, and so on. But each of them has a "Subject:" in the summary.
It's best to avoid searching for the comment names because they differ by language (an important issue when you work with colleagues in multiple countries). For example, the name of the "Highlight" comment type in French is "Texte surligné" - so you'd have to search for the latter term to get an accurate count.
In any case, your method is flexible and allows for easy customization of comment counts. Many thanks for your effective help!
Cheers,
--Michael

Count the number of lines in a txt file

I need to count the number of lines in a txt file, but I can't do it using readLine(). This is because the txt file is double spaced. readLine() returns null even if it is not the end of the file. thanks for the help

I need to count the number of lines in a txt file,
but I can't do it using readLine(). Then just compare each single byte or char to the newline (code 10).
This is because the txt file is double spaced. readLine() returns
null even if it is not the end of the file.Errm what? What do you mean by "double spaced"? Method readLine() should only return null if there's nothing more to read.

Need Query to Calcute number of Polygins

Hi All,
I have a problem trying to figure out solve the below problem :
I have one table which contains informations about lot nos. The table is as below : TABLE A
PROJECT_ID MKTS_IND MKTS_NO LOT_NO
14223 MK 17 00102X
15213 MK 17 00102X
47299 MK 17 00102X
46911 MK 25 98095N
2446 MK 25 98095N
I have another table which has all the polygons which a project belongs to as below : TABLE B
PROJECT_ID POLYGON_ID
2446 MK25B156
14223 MK17B426
15213 MK17C016
46911 MK25B157
47299 MK17B424
The first requirement is to get all the LOT NO which are having more than one polygon ,
e.g
From Table A MKTS_IND+MKTS_NO+'-'+LOT_NO(=MK17-00102X) should be selected if it is in TABLE B with more than one POLYGON_ID. ( Note . More than one project id need not mean it is in multiple POLYGON_ID )
Now the more complex part .
I have another table which is as below : TABLE C
PARENT_LOT_NO CHILD_LOT_NO
MK02-01368N MK02-02431N
MK02-01369X MK02-02902A
MK02-01370K MK02-02892A
We need to match from TABLE A MKTS_IND+MKTS_NO+'-'+LOT_NO(=MK17-00102X) with the CHILD_LOT_NO and get the PARENT_LOT_NO and using this parent lot no we need to count the number of polygons that this parent lot number belongs. There can be many parent lot numbers for this.
For each parent lot no found we need to go back again in TABLE C and match with the CHILD_LOT_NO and loop through the parent lot no to count the number of polygons for each parent .
As an example :
Lets say i have MK17-00102X from TABLE A . I will select the PARENT_LOT_NO from TABLE C where CHILD_LOT_NO=MK17-00102X.
Loop through ALL the Parent Lot Nos found . Lets say I found two parent lot numbers for this : MK17-1111A AND MK17-1111B
I will need to calculate the number of polygons for MK17-1111A and MK17-1111B .
I will then need to go to TABLE C and get PARENT LOT NO's for MK17-1111A and MK17-1111B and calculate the number of polygon for these new parent lot numbers.
Please let me know if there is any easy way to do the job or we need to write PL/SQL procedure for this.
I have tried to make the requirement as clear as possible.
Thanks for your time and effort on this..
Regards
Ravinder
Edited by: user10934487 on Jul 4, 2010 9:12 PM
Edited by: user10934487 on Jul 4, 2010 9:21 PM

Hi, Ravinder,
Whenever you have a question, please post CREATE TABLE and INSERT statements for a little sample data, and the results you want from that data. Without that, it's hard to understnd what you want, and impossible to test solutions.
If you want a solution that works in your version of Oracle, then say what version that is.
I think this is what you want fro the first problem:
SELECT       a.mkts_ind, a.mkts_no, a.lot_no
FROM       a
JOIN       b     ON     a.mkts_ind ||
               a.mkts_no ||
               '-'        ||
               a.lot_no     = b.polygon_id
GROUP BY a.mkts_ind, a.mkts_no, a.lot_no
HAVING       COUNT (b.polygon_id)     > 1
ORDER BY a.mkts_ind, a.mkts_no, a.lot_no
;For the second (more complex) problem, I think you want a CONNECT BY query. I don't think you need PL/SQL, but without the exact data and results, I'm just guessing.

Count the number of records between two key values (BTREE)

How can I count the number of keys between two values?
I'm using python driver, and BTREE access method.
====>
ideally what I want is to average a whole time-series data set (the intervals can change) to a given number of points. The keys are the time stamps and the values are the data that needs to be averaged. I need to count the number of records between two time stamps so that I can divide that number by the number of points i need, and average the data. What is the best way to do this? Or should I just keep the intervals for the time stamp constant and use RECNO access method?
Thank you
(first post btw.. and why aren't there many people in stackoverflow who answer Berkeley DB questions?)

BDB is an embedded db and it does not have any internal counters or statistics that you could grap to use for this. You will need to do it manually.
You can create a cursor, grap the records you want, each time you get the next record you bump a counter.
If you are using RECNO, you can use a cursor to get the record number of the record (DB_GET_RECNO), and if all you data is in
sequentail records with no missing records you can figure out the total count by take last rec # - initial rec # + 1 to get a total count.
If you switch over to the SQL API, you can issue a SQL query to give you a count. Select count(*) Where .......
Since you have to grab the data anyway, then best may be to count records as you go along.
thanks
mike

Counting the number of occurences in a table column

Hi All
I have a table with a column that contains approx. 5000 6-digit codes. A number of these codes are duplicted in the column, and I want to count the number of occurences of each code. The column looks a bit like -
WCID
940042
920012
940652
940199
188949
155146
155196
174196
152148
151281
196209
174015
182163
195465
195318
182008
189589
150675
There can be mulitple instances of each WCID and I need to count the number of instances of each. I also have access to another table that also has a column of each WCID, but only once - ie no multiple instances. The second table is identical except that there are only single instances of each WCID.
I thought I could either loop through on the table to be counted, from 100000 to 999999 and count each occurence that way, but it would be very inefficient. The other way I thought would be to perhaps select a WCID from the unique table, count the occurence of that, select the next WCID from the unique table, count that and so on, however I'm not sure how to do it in PL/SQL. Perhaps select the WCID from the unique table into a cursor, loop through that and compare it with the original table and count the instances?
I hope this makes some sense, any help would be really appreciated
Thanks
Bill

Hi, Bill,
That sounds like a job for GROUP BY:
SELECT    wcid
,         COUNT (*)       AS num_found
FROM      table_x
GROUP BY wcid
ORDER BY wcid
I hope that answers your question.
If not, post CREATE TABLE and INSERT statements for a little sample data, and the results you want from that data.

Need a count for number of emails

Similar Messages

Maybe you are looking for