Need a good iOS app for measuring image size and app to set printer PPI.

I'm looking for a photo app for IOS that will give me an accurate representation of the PPI size of my images from my iPhone 6plus as well as my point and shoot camera and also let me set the dpi on my photo printer. Printing photos from the native IOS camera roll is a gamble at best. Nearly impossible to print an 8 x10 with white borders for framing.

The aspect ratio of the iPhone camera image is 3:4 (3 units high x 4 units wide when held horizontally).  Notice I did not say pixels or dots per inch but units which can represent any kind of measurement. The aspect ratio of a 8x10 print is 4 units x 5 units so no matter how you slice it you cannot fit a un-cropped full frame iPhone photo onto a 8x10 print without white boarder on two sides while the other two sides are printed to the edge. You can but the image would be distorted. Simply put PPI doesn't translate well to DPI. This isn't the place for photo class so I'll leave at that. Before you go out and buy editing software for resizing images for print you should study PPI vs. DPI and resizing digital images for print. Knowing those differences will help you make the best software choice.

Similar Messages

  • When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching.  Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod too.  Can I move these back?

    When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching.  Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod touch too.  Can I move these back?

    weird very weird. today i did this again today after already being unsuccessful earlier. exactly the same thing as i have done before, exactly. didn't try to import. didn't say damaged library, copied everything in including date. have tried it about 10 times no luck. today it just worked.
    how weird is that?
    oh well JG - maybe you mixed a magic potion for me?
    anyway, thank you for all the help.
    to anyone else reading this all i can say is keep trying, you never know. follow the above advice. you may feel exasperated and think you have done it already, but keep trying.
    cheers
    P

  • Marydee-You asked me about resizing apps for jpeg images & how 2 get info

    Marydee- You asked me about resizing apps for jpeg images. And you also asked how to get photo info for each image in iphoto
    Here's what I found in the iPhoto6 Help Menu:
    Showing a photo's image and camera information
    iPhoto stores EXIF information with each photo in your library. This information includes the photo's image size, the date and time it was taken, and the type of camera it was taken on, as well as important exposure information, such as the shutter speed, aperture, and film ISO.
    To show image and camera information:
    Select the photo and choose Photos > Get Info.
    You can also see a photo's title, date taken, rating, format, and comments by clicking the Information button in the bottom-left corner of the iPhoto window.
    Also please take a look at these prior discussions in iPhoto Forum/s:
    http://discussions.apple.com/thread.jspa?messageID=3212997&#3212997
    http://discussions.apple.com/thread.jspa?messageID=4535542&#4535542
    http://kstudio.net/re.html
    Hope the above helps and good luck on this.
    (3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc.   Mac OS X (10.4.8)  

    Marydee- You asked me about resizing apps for jpeg images. And you also asked how to get photo info for each image in iphoto
    Here's what I found in the iPhoto6 Help Menu:
    Showing a photo's image and camera information
    iPhoto stores EXIF information with each photo in your library. This information includes the photo's image size, the date and time it was taken, and the type of camera it was taken on, as well as important exposure information, such as the shutter speed, aperture, and film ISO.
    To show image and camera information:
    Select the photo and choose Photos > Get Info.
    You can also see a photo's title, date taken, rating, format, and comments by clicking the Information button in the bottom-left corner of the iPhoto window.
    Also please take a look at these prior discussions in iPhoto Forum/s:
    http://discussions.apple.com/thread.jspa?messageID=3212997&#3212997
    http://discussions.apple.com/thread.jspa?messageID=4535542&#4535542
    http://kstudio.net/re.html
    Hope the above helps and good luck on this.
    (3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc.   Mac OS X (10.4.8)  

  • Checking Image Size and Dimensions

    How do I check the size of an image like a Signature or another image without having to save it and then checking it? Is there a way to check it in Safari?

    What? I don't see "Inspect Element" anywhere.
    Are there any plugins (perhaps at pimpmysafari.com) where we can add functions such as "Properties" for viewing image size and dimensions, as well as "View Image" to view the image by itself? I'm trying to convert from Firefox, but these are a couple of the things getting in the way.

  • Do i need a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

    after having my mbp upgraded  with new m.lion by apple tech service i noticed that applications like iphoto, garageband and imovie are gone
    researched online and was told that i had to acess the `purchase` via AppStore where it asks me to log in with Apple ID and password
    i used the usual admin login and password and didnt work, also on itunes and icloud the similar case
    do i need to register with a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

    Just use the same Apple ID and password that you used to access this forum - that's your Apple ID.
    The user name and password on your computer has nothing to do with your Apple ID.
    Good luck,
    Clinton

  • Why do i need to buy the same app for each device over and over again??

    why do i need to buy the same app for each device over and over again??
    and why cant i just pay for the app ones for all devices as long at it is with the same account??
    i hate that i have to oay for the same game or app three time one for ipad ones for iphone and ones for mac please do something about that apple..!!!

    First, you posted in the Mac App Store forum which are apps for the Mac OS X, not iOS devices.
    You do not need to re purchase your apps. Connect your iOS devices to your computer, launch iTunes. From the menu bar click Apps then click Sync
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT4623 Ater installing IOS 6 for my iphone 4,some apps are hang sometimes and Mail apps totally hang ,tried to reset again and again but still hang

    Ater installing IOS 6 for my iphone 4,some apps are hang sometimes and Mail apps totally hang ,tried to reset again and again but still hang.How to solve this problem??

    well in thatcase, i need another help .
    thanks for your instant reply.
    i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
    because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

  • App for measure phone cost

    Hi,
    Wonder if any have found an app for measure phone calls, sms, mms costs?
    Would be great to have this an check this against the invoice.
    /Per

    Will check but I suspect they dont have this. I have checked on their site and cant find anything there. I still wonder if it can be any app out there in the app world? I'm searching for an app that can measure number of calls, sms and mms. Also if the app can measure the lenghts of call. Then its up to the user to setup each cost for each part. I assume an app could pick this data and calculate each cost for calls, sms and mms.
    Message was edited by: Per Soderman

  • I downloaded ios 6 for my iPad 2 and some of the upgrades went through but not all. It sounds like I need to reinstall ios 6. How do you do that? Everytime I try to upgrade it says I'm already updated

    I downloaded ios 6 for my iPad 2 and some of the upgrades went through but not all. It sounds like I need to reinstall ios 6. How do you do that? Everytime I try to upgrade it says I'm already updated

    If you mean Siri then that is only on the iPad 3, it is not on the iPad 2 in iOS 6 (possibly because the iPad 2 doesn't have the Audience chip which the iPad 3 does). If there are other things that you think are missing (YouTube has been removed, and Passbooks is iPhone and iPod Touch only) ?

  • The value should be set for Base image URL and Image file directory

    Hi experts
    Now customer has the following issue.
    XML Publisher concurrent request, using RTF layout template with LOGO, does not generate the LOGO for Excel output.
    but in output formats PDF, it is shown normally.
    from the debug log, we can found the following error message
    ======
    [051812_054716051][][ERROR] Could not create an image. Set html-image-dir and html-image-base-uri correctly.
    ======
    so I tell the customer to do the following action plan.
    1. in XML Publisher Administrator resp > Administration expand the HTML Output section.
    2a. enter a value for 'Base image URI'
    2b. enter a value for 'Image file directory'
    Customer set the value as following and retest this issue,but he found the issue is not solved.
    Base image URI: /u01/r12/ebssnd/apps/apps_st/comn/java/classes/oracle/apps/media/XXSLI_SONY_LIFE_LOGO.gif
    Image file directory: /u01/r12/ebssnd/apps/apps_st/comn/java/classes/oracle/apps/media
    I verified 'Base image URI' and 'Image file directory' settings:
    1) Change output type to HTML.
    2) Click the Preview.
    but the image is correctly displayed on HTML, so I think the issue is caused by user's uncorrectly setting of the base image URL and/or image file directory
    but could anyone give me some advice on which value should be set for Base image URL and Image file directory
    Regards
    shuangfei

    First thing to do is to edit the post and use some tags to format the code as it is unreadable and too much!
    Read the FAQ (https://forums.oracle.com/forums/help.jspa) to find out how to do this.
    Next we need to know the jdev version you are using!
    As the code is generated I would first try to generate it again after the db change.
    Timo

  • DO i need some extra hardware interface for receving both Audio and video

    hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
    but my code is working fine for either one at a time.
    DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
    After running TX
    i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
    and when i give vfw://0 in Media Locater only live video is transmited.
    im using JMF1.1.2e.
    if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
    transmiter/server side code .first run TX on server
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.util.*;
    import javax.media.rtp.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.border.*;
    public class Tx extends JFrame implements ActionListener, KeyListener,
    MouseListener, WindowListener {
    Vector targets;
    JList list;
    JButton startXmit;
    JButton rtcp;
    JButton update;
    JButton expiration;
    JButton statistics;
    JButton addTarget;
    JButton removeTarget;
    JTextField tf_remote_address;
    JTextField tf_remote_data_port;
    JTextField tf_media_file;
    JTextField tf_data_port;
    TargetListModel listModel;
    AVTransmitter avTransmitter;
    RTCPViewer rtcpViewer;
    JCheckBox cb_loop;
    Config config;
    public Tx() {
    setTitle( "JMF/RTP Transmitter");
         config= new Config();
         GridBagLayout gridBagLayout= new GridBagLayout();
         GridBagConstraints gbc;
         JPanel p= new JPanel();
         p.setLayout( gridBagLayout);
         JPanel localPanel= createLocalPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 0;
         gbc.gridy= 0;
         gbc.gridwidth= 2;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
         p.add( localPanel);
         JPanel targetPanel= createTargetPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 1;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
    p.add( targetPanel);
         JPanel mediaPanel= createMediaPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 2;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
    p.add( mediaPanel);
    JPanel buttonPanel= new JPanel();
    rtcp= new JButton( "RTCP Monitor");
    update= new JButton( "Transmission Status");
         update.setEnabled( false);
         rtcp.addActionListener( this);
         update.addActionListener( this);
         buttonPanel.add( rtcp);
         buttonPanel.add( update);
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 3;
    gbc.gridwidth= 2;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
         p.add( buttonPanel);
    getContentPane().add( p);
         list.addMouseListener( this);
         addWindowListener( this);
    pack();
    setVisible( true);
    private JPanel createMediaPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         JLabel label= new JLabel( "Media Locator:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         tf_media_file= new JTextField( 35);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
         p.add( tf_media_file);
         tf_media_file.setText( config.media_locator);
         cb_loop= new JCheckBox( "loop");
         startXmit= new JButton( "Start Transmission");
         startXmit.setEnabled( true);
         startXmit.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 2;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
         p.add( cb_loop);
         cb_loop.setSelected( true);
         cb_loop.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
         p.add( startXmit);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
         p.setBorder( titledBorder);
         return p;
    private JPanel createTargetPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         targets= new Vector();
         for( int i= 0; i < config.targets.size(); i++) {
         targets.addElement( config.targets.elementAt( i));
    listModel= new TargetListModel( targets);
    list= new JList( listModel);
         list.addKeyListener( this);
         list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
    JScrollPane scrollPane= new JScrollPane( list,
    ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
    ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
         gbc= new GridBagConstraints();
         gbc.gridx= 0;
         gbc.gridy= 0;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
         p.add( scrollPane);
    JPanel p1= new JPanel();
         p1.setLayout( gridBagLayout);
         JLabel label= new JLabel( "IP Address:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
         p1.add( label);
         tf_remote_address= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
         p1.add( tf_remote_address);
         label= new JLabel( "Data Port:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
         p1.add( label);
         tf_remote_data_port= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
         p1.add( tf_remote_data_port);     
    JPanel p2= new JPanel();
    addTarget= new JButton( "Add Target");     
    removeTarget= new JButton( "Remove Target");
         p2.add( addTarget);
         p2.add( removeTarget);
         addTarget.addActionListener( this);
         removeTarget.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 2;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.gridwidth= 2;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 20,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
         p1.add( p2);
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 0;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
         p.add( p1);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
         p.setBorder( titledBorder);
         return p;
    private JPanel createLocalPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         JLabel label= new JLabel( "IP Address:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         JTextField tf_local_host= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
         p.add( tf_local_host);
         try {
    String host= InetAddress.getLocalHost().getHostAddress();     
         tf_local_host.setText( host);
         } catch( UnknownHostException e) {
         label= new JLabel( "Data Port:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         tf_data_port= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
         p.add( tf_data_port);
         tf_data_port.setText( config.local_data_port);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
         p.setBorder( titledBorder);
         return p;
    public void actionPerformed( ActionEvent event) {
    Object source= event.getSource();
         if( source == addTarget) {
         String ip= tf_remote_address.getText().trim();
         String port= tf_remote_data_port.getText().trim();
         String localPort= tf_data_port.getText().trim();
         addTargetToList( localPort, ip, port);
         if( avTransmitter != null) {
         avTransmitter.addTarget( ip, port);
         } else if( source == removeTarget) {
         int index= list.getSelectedIndex();
         if( index != -1) {
              Target target= (Target) targets.elementAt( index);
              if( avTransmitter != null) {
         avTransmitter.removeTarget( target.ip, target.port);
              targets.removeElement( target);
              listModel.setData( targets);          
         } else if( source == startXmit) {
         if( startXmit.getLabel().equals( "Start Transmission")) {          
         int data_port= new Integer( tf_data_port.getText()).intValue();
              avTransmitter= new AVTransmitter( this, data_port);
         avTransmitter.start( tf_media_file.getText().trim(), targets);          
              avTransmitter.setLooping( cb_loop.isSelected());
         startXmit.setLabel( "Stop Transmission");
         } else if( startXmit.getLabel().equals( "Stop Transmission")) {
              avTransmitter.stop();
              avTransmitter= null;
              removeNonBaseTargets();
              listModel.setData( targets);
         startXmit.setLabel( "Start Transmission");          
         } else if( source == rtcp) {
         if( rtcpViewer == null) {
         rtcpViewer= new RTCPViewer();
         } else {
              rtcpViewer.setVisible( true);
              rtcpViewer.toFront();
         } else if( source == cb_loop) {
         if( avTransmitter != null) {
              avTransmitter.setLooping( cb_loop.isSelected());
    private void removeNonBaseTargets() {
         String localPort= tf_data_port.getText().trim();
         for( int i= targets.size(); i > 0;) {
         Target target= (Target) targets.elementAt( i - 1);
         if( !target.localPort.equals( localPort)) {
    targets.removeElement( target);
         i--;
    public void addTargetToList( String localPort,
                             String ip, String port) {     
    ListUpdater listUpdater= new ListUpdater( localPort, ip,
                                  port, listModel, targets);
    SwingUtilities.invokeLater( listUpdater);           
    public void rtcpReport( String report) {
         if( rtcpViewer != null) {
         rtcpViewer.report( report);
    public void windowClosing( WindowEvent event) {
         config.local_data_port= tf_data_port.getText().trim();
         config.targets= new Vector();
         for( int i= 0; i < targets.size(); i++) {
         Target target= (Target) targets.elementAt( i);
         if( target.localPort.equals( config.local_data_port)) {
              config.addTarget( target.ip, target.port);
         config.media_locator= tf_media_file.getText().trim();
         config.write();
    System.exit( 0);
    public void windowClosed( WindowEvent event) {
    public void windowDeiconified( WindowEvent event) {
    public void windowIconified( WindowEvent event) {
    public void windowActivated( WindowEvent event) {
    public void windowDeactivated( WindowEvent event) {
    public void windowOpened( WindowEvent event) {
    public void keyPressed( KeyEvent event) {
    public void keyReleased( KeyEvent event) {
    Object source= event.getSource();
         if( source == list) {
         int index= list.getSelectedIndex();
    public void keyTyped( KeyEvent event) {
    public void mousePressed( MouseEvent e) {
    public void mouseReleased( MouseEvent e) {
    public void mouseEntered( MouseEvent e) {
    public void mouseExited( MouseEvent e) {
    public void mouseClicked( MouseEvent e) {
    Object source= e.getSource();
         if( source == list) {
         int index= list.getSelectedIndex();
         if( index != -1) {
              Target target= (Target) targets.elementAt( index);
              tf_remote_address.setText( target.ip);
              tf_remote_data_port.setText( target.port);
         int index= list.locationToIndex( e.getPoint());
    public static void main( String[] args) {
    new Tx();
    class TargetListModel extends AbstractListModel {
    private Vector options;
    public TargetListModel( Vector options) {
         this.options= options;
    public int getSize() {
         int size;
         if( options == null) {
         size= 0;
         } else {
         size= options.size();
         return size;
    public Object getElementAt( int index) {
    String name;
    if( index < getSize()) {
         Target o= (Target)options.elementAt( index);
    name= o.localPort + " ---> " + o.ip + ":" + o.port;
         } else {
         name= null;
         return name;
    public void setData( Vector data) {
         options= data;
         fireContentsChanged( this, 0, data.size());
    class ListUpdater implements Runnable {
    String localPort, ip, port;
    TargetListModel listModel;
    Vector targets;
    public ListUpdater( String localPort, String ip, String port,
                   TargetListModel listModel, Vector targets) {
         this.localPort= localPort;
         this.ip= ip;
         this.port= port;
         this.listModel= listModel;
         this.targets= targets;
    public void run() {
    Target target= new Target( localPort, ip, port);
         if( !targetExists( localPort, ip, port)) {
         targets.addElement( target);
    listModel.setData( targets);
    public boolean targetExists( String localPort, String ip, String port) {
         boolean exists= false;
         for( int i= 0; i < targets.size(); i++) {
         Target target= (Target) targets.elementAt( i);
         if( target.localPort.equals( localPort)
         && target.ip.equals( ip)
              && target.port.equals( port)) {          
              exists= true;
         break;
         return exists;
    >>>>>>>>>>>>>>>>>
    import java.awt.*;
    import java.io.*;
    import java.net.InetAddress;
    import java.util.*;
    import javax.media.*;
    import javax.media.protocol.*;
    import javax.media.format.*;
    import javax.media.control.TrackControl;
    import javax.media.control.QualityControl;
    import javax.media.rtp.*;
    import javax.media.rtp.event.*;
    import javax.media.rtp.rtcp.*;
    public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
    ControllerListener {
    // Input MediaLocator
    // Can be a file or http or capture source
    private MediaLocator locator;
    private String ipAddress;
    private int portBase;
    private Processor processor = null;
    private RTPManager rtpMgrs[];
    private int localPorts[];
    private DataSource dataOutput = null;
    private int local_data_port;
    private Tx tx;
    public AVTransmitter( Tx tx, int data_port) {
         this.tx= tx;
         local_data_port= data_port;
    * Starts the transmission. Returns null if transmission started ok.
    * Otherwise it returns a string with the reason why the setup failed.
    public synchronized String start( String filename, Vector targets) {
         String result;
         locator= new MediaLocator( filename);
         // Create a processor for the specified media locator
         // and program it to output JPEG/RTP
         result = createProcessor();
         if (result != null) {
         return result;
         // Create an RTP session to transmit the output of the
         // processor to the specified IP address and port no.
         result = createTransmitter( targets);
         if (result != null) {
         processor.close();
         processor = null;
         return result;
         // Start the transmission
         processor.start();
         return null;
    * Use the RTPManager API to create sessions for each media
    * track of the processor.
    private String createTransmitter( Vector targets) {
         // Cheated. Should have checked the type.
         PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
         PushBufferStream pbss[] = pbds.getStreams();
         rtpMgrs = new RTPManager[pbss.length];
         localPorts = new int[ pbss.length];
         SessionAddress localAddr, destAddr;
         InetAddress ipAddr;
         SendStream sendStream;
         int port;
         SourceDescription srcDesList[];
         for (int i = 0; i < pbss.length; i++) {
         // for (int i = 0; i < 1; i++) {
         try {
              rtpMgrs[i] = RTPManager.newInstance();     
              port = local_data_port + 2*i;
              localPorts[ i]= port;
              localAddr = new SessionAddress( InetAddress.getLocalHost(),
                                  port);
              rtpMgrs.initialize( localAddr);          
              rtpMgrs[i].addReceiveStreamListener(this);
              rtpMgrs[i].addRemoteListener(this);
         for( int k= 0; k < targets.size(); k++) {
              Target target= (Target) targets.elementAt( k);
              int targetPort= new Integer( target.port).intValue();
              addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
              sendStream = rtpMgrs[i].createSendStream(dataOutput, i);          
              sendStream.start();
         } catch (Exception e) {
              e.printStackTrace();
              return e.getMessage();
         return null;
    public void addTarget( String ip, String port) {
         for (int i= 0; i < rtpMgrs.length; i++) {
         int targetPort= new Integer( port).intValue();
         addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
    public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
         try {
         SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                                  new Integer( port).intValue());
         mgr.addTarget( addr);
         tx.addTargetToList( localPort + "", ip, port + "");
         } catch( Exception e) {
         e.printStackTrace();
    public void removeTarget( String ip, String port) {
         try {     
         SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                                  new Integer( port).intValue());
         for (int i= 0; i < rtpMgrs.length; i++) {
         rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
         } catch( Exception e) {
         e.printStackTrace();
    boolean looping= true;
    public void controllerUpdate( ControllerEvent ce) {
         System.out.println( ce);
         if( ce instanceof DurationUpdateEvent) {
         Time duration= ((DurationUpdateEvent) ce).getDuration();
         System.out.println( "duration: " + duration.getSeconds());
         } else if( ce instanceof EndOfMediaEvent) {
         System.out.println( "END OF MEDIA - looping=" + looping);
         if( looping) {
         processor.setMediaTime( new Time( 0));
              processor.start();
    public void setLooping( boolean flag) {
         looping= flag;
    public void update( ReceiveStreamEvent event) {
         String timestamp= getTimestamp();
         StringBuffer sb= new StringBuffer();
         if( event instanceof InactiveReceiveStreamEvent) {
         sb.append( timestamp + " Inactive Receive Stream");
         } else if( event instanceof ByeEvent) {
         sb.append( timestamp + " Bye");
         } else {
         System.out.println( "ReceiveStreamEvent: "+ event);
         tx.rtcpReport( sb.toString());     
    public void update( RemoteEvent event) {     
         String timestamp= getTimestamp();
         if( event instanceof ReceiverReportEvent) {
         ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
         StringBuffer sb= new StringBuffer();
         sb.append( timestamp + " RR");
         if( rr != null) {
              Participant participant= rr.getParticipant();
              if( participant != null) {
              sb.append( " from " + participant.getCNAME());
              sb.append( " ssrc=" + rr.getSSRC());
              } else {
              sb.append( " ssrc=" + rr.getSSRC());
              tx.rtcpReport( sb.toString());
         } else {
         System.out.println( "RemoteEvent: " + event);
    private String getTimestamp() {
         String timestamp;
         Calendar calendar= Calendar.getInstance();
         int hour= calendar.get( Calendar.HOUR_OF_DAY);
         String hourStr= formatTime( hour);
         int minute= calendar.get( Calendar.MINUTE);
         String minuteStr= formatTime( minute);
         int second= calendar.get( Calendar.SECOND);
         String secondStr= formatTime( second);
         timestamp= hourStr + ":" + minuteStr + ":" + secondStr;     
         return timestamp;
    private String formatTime( int time) {     
         String timeStr;
         if( time < 10) {
         timeStr= "0" + time;
         } else {
         timeStr= "" + time;
         return timeStr;
    * Stops the transmission if already started
    public void stop() {
         synchronized (this) {
         if (processor != null) {
              processor.stop();
              processor.close();
              processor = null;
         for (int i= 0; i < rtpMgrs.length; i++) {
         rtpMgrs[ i].removeTargets( "Session ended.");
              rtpMgrs[ i].dispose();
    public String createProcessor() {
         if (locator == null) {
         return "Locator is null";
         DataSource ds;
         DataSource clone;
         try {
         ds = javax.media.Manager.createDataSource(locator);
         } catch (Exception e) {
         return "Couldn't create DataSource";
         // Try to create a processor to handle the input media locator
         try {
         processor = javax.media.Manager.createProcessor(ds);
         processor.addControllerListener( this);     
         } catch (NoProcessorException npe) {
         return "Couldn't create processor";
         } catch (IOException ioe) {
         return "IOException creating processor";
         // Wait for it to configure
         boolean result = waitForState(processor, Processor.Configured);
         if (result == false)
         return "Couldn't configure processor";
         // Get the tracks from the processor
         TrackControl [] tracks = processor.getTrackControls();
         // Do we have atleast one track?
         if (tracks == null || tracks.length < 1)
         return "Couldn't find tracks in processor";
         // Set the output content descriptor to RAW_RTP
         // This will limit the supported formats reported from
         // Track.getSupportedFormats to only valid RTP formats.
         ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
         processor.setContentDescriptor(cd);
         Format supported[];
         Format chosen;
         boolean atLeastOneTrack = false;
         // Program the tracks.
         for (int i = 0; i < tracks.length; i++) {
         Format format = tracks[i].getFormat();
         if (tracks[i].isEnabled()) {
              supported = tracks[i].getSupportedFormats();
              // We've set the output content to the RAW_RTP.
              // So all the supported formats should work with RTP.
              // We'll just pick the first one.
              if (supported.length > 0) {
              if (supported[0] instanceof VideoFormat) {
                   // For video formats, we should double check the
                   // sizes since not all formats work in all sizes.
                   chosen = checkForVideoSizes(tracks[i].getFormat(),
                                       supported[0]);
              } else
                   chosen = supported[0];
              tracks[i].setFormat(chosen);
              System.err.println("Track " + i + " is set to transmit as:");
              System.err.println(" " + chosen);
              atLeastOneTrack = true;
              } else
              tracks[i].setEnabled(false);
         } else
              tracks[i].setEnabled(false);
         if (!atLeastOneTrack)
         return "Couldn't set any of the tracks to a valid RTP format";
         // Realize the processor. This will internally create a flow
         // graph and attempt to create an output datasource for JPEG/RTP
         // audio frames.
         result = waitForState(processor, Controller.Realized);
         if (result == false)
         return "Couldn't realize processor";
         // Set the JPEG quality to .5.
         setJPEGQuality(processor, 0.5f);
         // Get the output data source of the processor
         dataOutput = processor.getDataOutput();
         return null;
    static SessionAddress destAddr1, destAddr2;
    * For JPEG and H263, we know that they only work for particular
    * sizes. So we'll perform extra checking here to make sure they
    * are of the right sizes.
    Format checkForVideoSizes(Format original, Format supported) {
         int width, height;
         Dimension size = ((VideoFormat)original).getSize();
         Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
         Format h263Fmt = new Format(VideoFormat.H263_RTP);
         if (supported.matches(jpegFmt)) {
         // For JPEG, make sure width and height are divisible by 8.
         width = (size.width % 8 == 0 ? size.width :
                        (int)(size.width / 8) * 8);
         height = (size.height % 8 == 0 ? size.height :
                        (int)(size.height / 8) * 8);
         } else if (supported.matches(h263Fmt)) {
         // For H.263, we only support some specific sizes.
         if (size.width < 128) {
              width = 128;
              height = 96;
         } else if (size.width < 176) {
              width = 176;
              height = 144;
         } else {
              width = 352;
              height = 288;
         } else {
         // We don't know this particular format. We'll just
         // leave it alone then.
         return supported;
         return (new VideoFormat(null,
                        new Dimension(width, height),
                        Format.NOT_SPECIFIED,
                        null,
                        Format.NOT_SPECIFIED)).intersects(supported);
    * Setting the encoding quality to the specified value on the JPEG encoder.
    * 0.5 is a good default.
    void setJPEGQuality(Player p, float val) {
         Control cs[] = p.getControls();
         QualityControl qc = null;
         VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
         // Loop through the controls to find the Quality control for
         // the JPEG encoder.
         for (int i = 0; i < cs.length; i++) {
         if (cs[i] instanceof QualityControl &&
              cs[i] instanceof Owned) {
              Object owner = ((Owned)cs[i]).getOwner();
              // Check to see if the owner is a Codec.
              // Then check for the output format.
              if (owner instanceof Codec) {
              Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
              for (int j = 0; j < fmts.length; j++) {
                   if (fmts[j].matches(jpegFmt)) {
                   qc = (QualityControl)cs[i];
                   qc.setQuality(val);
                   System.err.println("- Setting quality to " +
                             val + " on " + qc);
                   break;
              if (qc != null)
              break;
    * Convenience methods to handle processor's state changes.
    private Integer stateLock = new Integer(0);
    private boolean failed = false;
    Integer getStateLock() {
         return stateLock;
    void setFailed() {
         failed = true;
    private synchronized boolean waitForState(Processor p, int state) {
         p.addControllerListener(new StateListener());
         failed = false;
         // Call the required method on the processor
         if (state == Processor.Configured) {
         p.configure();
         } else if (state == Processor.Realized) {
         p.realize();
         // Wait until we get an event that confirms the
         // success of the method, or a failure event.
         // See StateListener inner class
         while (p.getState() < state && !failed) {
         synchronized (getStateLock()) {
              try {
              getStateLock().wait();
              } catch (InterruptedException ie) {
              return false;
         if (failed)
         return false;
         else
         return true;
    * Inner Classes
    class StateListener implements ControllerListener {
         public void controllerUpdate(ControllerEvent ce) {
         // If there was an error during configure or
         // realiz

    I do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
    Hope It Works

  • Recommended image size and dimensions for images displayed on iPad retina?

    What are the recommended dpi image size and dimensions for images designed in DPS app as displayed on an iPad retina?

    Take a look at the following link:
    http://blogs.adobe.com/indesigndocs/2012/03/guidelines-for-creating-folios-for-ipad-3.html

  • I have purchased apps for my ipod touch and they are not loading properly.  They appear on the screen, however when I touch them, they do not load and bounce back to the main screen.  Any suggestions on how to fix?

    I have purchased apps for my ipod touch and they are not loading properly.  They appear on the screen, but when you touch them, they do not open and bounce back to the main screen.  Any ideas on how to fix?

    Try the basics from the manual:
    restart.
    reset.
    restore.
    iPod touch User Guide (For iOS 4.3 Software)

  • HT4972 Cannot download iOS 6.1.2 or iTunes and app stores

    Cannot download iOS 6.1.2 or iTunes and App Store for the past week and 2 days can u help thanks

    Error message?

  • My iPod will take for ever to load and app but then it just crashes what should I do?

    My iPod will take for ever to load and app but then it just crashes what should I do?

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

Maybe you are looking for