Need a guest password

need a guest password to connect my tab to the cisco router E900.

Hi,
Please refer to this link for the steps on how to retrieve it.

Similar Messages

  • Need a guest password help please

    need guest password

    Hi,
    Please proceed to the link below to see the steps on how to retrieve your guest password:
    Steps to Retrieve your Guest Password

  • I need a guest password

    For Cisco connect to get wifi access

    If you are the administrator/owner of the router, you need to open the cisco connect software and check the guest settings. There you will find the guest password.

  • I need a guest password please

    For my nook color please

    Click this link and you'll know the answer:
    http://www6.nohold.net/Cisco2/GetArticle.aspx?docid=c3e42afc03994df5bb6bc531b42e9201_21461.xml&pid=8...
    NOTE:  You have to be the administrator or the owner of the network to know the guest password.  Otherwise, you'll have to ask the owner of the network. 
    "Don't fix it if it ain't broken."

  • Need the guest password? Here's how to retrieve it.

    Open Cisco Connect then click Guest access.  The password is displayed under the Password header.  
    To go to the Guest access option using Cisco Connect, follow the steps below:
    Step 1:
    Select Guest access at the main screen of Cisco Connect.
    NOTE:  For instructions on how to launch Cisco Connect on a Windows or a Mac computer, click here.
    Step 2:
    In the Guests access settings window, you can enable or disable the Allow guest access, change and check the password for the guest network, or change the number of Total guests allowed.
    NOTE:  The Guest network name is the main network's SSID with -guest as a suffix.  If you want to change the guest network's name, you will need to change the main network's SSID.  To know more on how to do this, click here.

    Open Cisco Connect then click Guest access.  The password is displayed under the Password header.  
    To go to the Guest access option using Cisco Connect, follow the steps below:
    Step 1:
    Select Guest access at the main screen of Cisco Connect.
    NOTE:  For instructions on how to launch Cisco Connect on a Windows or a Mac computer, click here.
    Step 2:
    In the Guests access settings window, you can enable or disable the Allow guest access, change and check the password for the guest network, or change the number of Total guests allowed.
    NOTE:  The Guest network name is the main network's SSID with -guest as a suffix.  If you want to change the guest network's name, you will need to change the main network's SSID.  To know more on how to do this, click here.

  • Guest password

    I need a guest password for my Nook Tablet....Please Help

    Please follow the link below.
    Checking the password for the guest access network

  • I need a guest access password.

    I need a Guest Access Password..

    You'll need to contact the owner of that router/account and get permission. If you're getting that page you are on the internet, you just don't have the permission to go further (the lack of a password)
    To test, take your iPad to a place with open and free wifi, like  a mcDonalds or starbucks etc and see if it connects.

  • How do I set a guest password on my media hub?

    Page 43 of the NMH405 media hub manual indicates that you can set a guest password on users.  It is supposed to be under settings\system and although I see all the other settings under system, that one isn’t there.  Maybe they cut the feature at the last minute.  I'm running 3.18.15 of the firmware.
    My ultimate goal is to have one account that I can use to write new content to the server and one that is read only for my family.  I'm worried right now that they will delete the content (which they have done). 
    Any advice or workarounds to achieve this would be appreciated.
    Thanks,
    Peter
    Th

    Guest access can only be used if you'll be accessing the media hub remotely. Network Media Hub also lacks multiple user access. 
    You may refer to these articles about your Network Media Hub: 
    - Article ID: 19717: Accessing the Media Hub Remotely as a Guest
    - Article ID: 19714: Creating a Guest Password for Remote Access to the Media Hub
    - Article ID: 17571: Media Hub Lacks Multiple Users
    If everyone needs to believe in something, I believe I'll have another beer..

  • E2500 with no guest password prompt

    Try as I may, I cannot get the guest has no password or other security.
    I reset the router to factory defaults.
    I made sure it had the latest firmware.
    I turned off guest wifi then turned it back on.
    Guests CAN get online just fine, but it never prompts for the password that clearly shows on the relevant page.
    Can anyone help me get it working with a password? 

    By default, the guest password when using E2500 is ‘guest’ all in lower case. You can verify it or even change this default password on the router’s setup page, Wireless tab>>>>Guest Access sub tab. The guest network is broadcasting as unsecured but when you connect to it and access a webpage, it is then that you will be asked for the guest password. And there is no need to worry since the guest network is different from the main wireless network. The devices connected to the guest network can’t see the devices connected to the main wireless network or vice versa, this is because they are not on the same IP range. The guest computers will be having an IP of 192.168.33.xx or 192.168.3.xx and the IP from the main wireless network is 192.168.1.xx, if the default IP address of the router was not changed. And please try to make sure that your wireless adapter is not connected to the main wireless network when you connect to the guest network, you might be connect to your main wireless network that is why you were able to go online wirelessly even if you select the guest network, it would be best to delete preferred wireless network if you will try the guest network.

  • Guest password on E1000

    Hello there,
    Just bought myself an Cisco E1000 today and I am having problems figuring out what the "Guest" password is, how to change it and how to possibly disable it all together?.
    The Cisco CD can't access my router now claiming i changed the admin password, which I havent done at all.
    But is there some way to manually get access to said password, change it and/or disable guets access all together

    It is not possible to change the guest network settings manually.
    You need to use the Cisco connect software to change the guest access settings.
    Did you try to change the wireless settings of your router manually?
    If you change the wireless settings of the router manually then Cisco connect software will stop working.
    I think if you want to use Guest network then you will need to reset the router and reinstall the Cisco connect on your computer.

  • TS1543 my mac wont stop at single user it continues to root, how can i get to single user to enter info needed to reset password

    I my mac wont recognise my password, i have tried to reset password using single user but my mac wont stop at single user it just continues to root, how do i get it to stop at single user so i can add info needed to reset password?

    Are your sure that wasn't a Verbose boot (Cmd-V) you were trying? That would go on to a regular boot.
    Try a PRAM Reset, then try the single user, Cmd-S, at the startup chime. For the PRAM Reset, hold down Option - Cmd - P - R all together until it chimes a total of three times, then let go to finish booting.

  • XP pro file sharing and guest password - how to enable guest password?

    Hi,
    I want to share files between two Windows XP pro computers. I would also like that these shares can only be accessed with a password.
    Here's a description of my setup:
    I have two laptops: over 1 yo Fujitsu-Siemens (FS) running on Windows XP pro (finnish) and a brand new Thinkpad T61 (TP) running on Windows XP pro (english). Both of theses computers have guest account enabled and these accounts have also been password protected. FS's guest account is called "vieras" because of the language settings and TP's guest account is of course just "guest". Guest account passwords have been enabled using "net user <user name> *".
    I've disabled simple file sharing on both computers, set shared folder permission to only contain these users: TP - "Guest (TP\Guest)" and FS - "Vieras (FS\Vieras)". Both computers have F-secure on them so I've made firewall rules which enable following services both ways to a specific IP: Ping / ICMP echo request and reply ; Windows file sharing and network printers ; Windows network browsing ; ICMP / Internet Control Message Protocol. I've also enabled these services on Windows firewall.
    These computers can connect to each other either via Wi-Fi access point (b-mode) or directly using an ad-hoc Wi-Fi configuration (g-mode). Obviously the latter is used for more bandwidth hungry file transfers. Also, sometimes a cross-over Ethernet cable is used as well for even faster file transfers.
    Everything on my setup works just fine except just one thing. I connect to a shared resource by running the computer's IP address. When I connect from TP to FS it prompts for username and password. FS accepts both english and finnish names for  the guest account provided that the password is correct. But here's the problem... When connecting from FS to TP _no password or username prompt appears_. If I browse TP's shared folder sessions (under My Computer -> manage) I can see that FS is logged on as "vieras" i.e. FS's guest account.
    Since I enabled FS's network shares over a year a go I can't remember everything I did to make it work. Every relevant configuration on TP and FS seem to be identical (e.g. "Security settings -> local policies -> security options -> Accounts: limit local account use of blank passwords to console logon only -> enabled") but still TP accepts connections without password prompt.
    I've tried to get TP's password prompts enabled for a while now without any success. I did a lot of searching on the subject but I could only find instructions on how to disable guest account password prompts for network shares.
    Has anyone had similar experiences or does anyone know what I should try out next? Thanks...
    Solved!
    Go to Solution.

    Success!
    I solved my problem by changing guest account passwords. I tried to keep things simple by using the same guest password on both computers. This however allowed FS to log on to TP without guest password for some unknown reason. My logic would tell me that having the same guest password would allow both computers to log in without password but this wasn't obviously the case. I guess Windows has its own logic that I can't figure out or this issue had something to do with different language setups. Anyhow my shares work now like I want them to work.

  • I just updated to 10.8 Mountain Lion. Now I must enter my admin password each time I attempt to access my main hard drive.  How do I reverse the need for the password.  It's a real PAIN!

    I just updated to 10.8 Mountain Lion from 10.7.5.  Now I must enter my admin password each time I attempt to access my main hard drive.  How do I reverse the need for the password?  It's a real PAIN! 

    I'd think you have a Keychain problem (Keychain storing passwords and the likes).
    When you are being asked, are you offered the checkbox, "Remember this password in my Keychain"? If so, check and see if it stops asking.

  • I lost my restrictions password and want to reset my ipod so i can put a new one on, when i try reset it it makes me put in my device password and restrictions password! How can i reset my ipod if i need the restrictions password why i am resetimg my

    I lost my restrictions password and want to reset my ipod so i can put a new one on, when i try reset it it makes me put in my device password and restrictions password! How can i reset my ipod if i need the restrictions password which is why i am resetimg my. Ipod

    Forgotten RESTRICTIONS Passcode
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.   
    - If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
    How to reset forgotten Restrictions...: Apple Support Communities
    - How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog

  • I have bought an ipad, and when i go to reset it, it needs the restrictions password which i dont know. When i plug it into itunes, it asks to turn find my iphone off, which needs the password of the old owners itunes.What should i do?

    I have bought an ipad, and when i go to reset it, it needs the restrictions password which i dont know. When i plug it into itunes, it asks to turn find my iphone off, which needs the password of the old owners itunes.What should i do?

    If you're able to contact the person who set the lock, send them this link and tell them to follow its instructions.
    If not, you can't use the device but may be able to get it refunded. Apple won't remove the lock for anyone other than the original owner(assuming they're alive.)
    (119278)

Maybe you are looking for

  • ITunes will not start after upgrade

    Ok...I downloaded the upgrade for 7.6, and it told me that after the download itunes would open automatically. It didn't. Every time I click on the icon, it just flashes and then nothing happens. No error message or anything. It just ignores me...but

  • Using Vista With VMWare Fusion

    Hello everyone, I just bought VMWare and Vista, but the mac geniuses told me there are some problems with running vita and that I'm better off running XP. What kind of problems occur? Is it indeed better yo run XP. I really need vista to run office a

  • Changing cursor to the built in Hand cursor

    I am working with CS4 with AS 3. I have defined a MovieClip library symbol. I want the cursor to be hand when mouse is over it. The stage has a single instance of the symbol with the name "btn". I tried the following in first frame of the symbol: thi

  • When need to update statistics for a table

    In Sybase we use "delete statistics ", "update all statistics " and "sp_recompile ", does Oracle need to do such things in any case? Thank you!

  • Open cards that I can not seem to see

    I have no visable open cards, I have no access to apps because I have too many open cards, I have nothing but 5 icons on my phone front screen,  the green phone the envelope the contacts calendar and a black arrow that opens applications, there is no