Need advice on an Audio Interface for guitar, bass and vocals

I have a G4 Dual Processor 500.
For now I'm using a Griffin 1/4" to 1/8" adapter cable. I plug one end into my guitar and the other into my Microphone jack on the back of my computer. I even tried using a splitter to share my microphone port. This allowed me to share the stereo signal with Guitar and bass ( by setting guitar to left mono and bass to right mono in GB). This doesn't work well at all!!!
My goal is to have my friend come over so we can record live into GB using a custom software drum track with two real instrument tracks, guitar (me) and bass (him).
So, what is a good multi track audio interface (mixer) to do this with. Hopefully one that doesn't have latency problems. I think a four track would be enough, right.
Is firewire better than USB?
What mixers do most GB muscians use?
thanks,
Haifarm

Sorry to highjack this discussion. I'm new to the boards and couldn't figure out how to post a new message.
Does anyone know when M-Audio might be updating their drivers to support Leopard? I've been monitoring the M-Audio site, but they're not being very specific with a time estimate. Does anyone remember how long it took them when Tiger was released? I really miss being able to use my Firewire 410 interface and 88es Keystation.
Thanks in advance,
Chris

Similar Messages

What's the best audio interface for Logic Pro and Mac?

What's the best audio interface for Logic Pro and Mac?

Depends on the computer model and if you have unlimited funds.

Need help finding an audio interface for my old ADAT

Hello,
I've been using Cakewalk Sonar for about 3 years and recently purchased a Macbook Pro and am making the switch to logic. In Windows I was using a E-mu 1212m PCI audio card that was connected via lightpipe to a Behringer ADA8000 8-channel preamp that has ADAT lightpipe output.
The songs I do are 90% audio with midi only used very sparingly for maybe a piano here and there. I record drums with a 6 mic setup (2 overheads, 2 on snare, one bass, one hi-hat). I'm looking for a new audio interface to use with my Macbook Pro. I'm also looking at purchasing Logic Express as it seems like the only things in Pro that affect me is more channels than I use on songs.
I would really like to spend no more than maybe 400-600 dollars if possible. Based on reading these forums, the best thing may be for me to get a MOTU 828 MKII off eBay (they seem to be available for about 500) or PreSonus Firepod.
I've heard that some people love the PreSonus Fireface, but I'm not sure how the Firepod compares. Are the converters on the Firepod and 828 comparable or is the 828 significantly better?
Also, my behringer preamps seem OK but I wonder if the Firepod would probably have better sounding ones, I think I only paid 2 or 300 dollars for the Behringer one.
Any feedback at all would be great. Alot of great stuff on this forum I'm just having a tough time figuring out if I should ditch my existing ADAT preamp for a Firepod or use it with the 828 basically.
Thanks,
-Jayme
Macbook Pro 2.33 Mac OS X (10.4.9)

Hi Jayme,
Welcome to the Forum!
Have you consider the Traveler?
http://www.motu.com/products/motuaudio/traveler/overview.html
Boy, see it for yourself, for a couple of hundred dollars more you've got
192k and then some.
:o)
Cheers,
Jorge

Need advice on new hard drive for Time Machine, and have Firewire questions

I have an Intel iMac 2.66GHz with 500GB internal drive. I am going to buy an OWC 1TB drive to use for Time Machine.
I also have an older 160GB external drive with Firewire 400. I'd like to continue using it for extra storage, and would like both the iMac's internal drive and the 160GB external drive to be backed up to the new drive.
OWC's 1TB drive is available with Firewire 400 & USB 2. For an additional $30, it will also have Firewire 800. If I get the Firewire 800 drive and daisy-chain the iMac > new 1TB drive > old 160GB drive, will the iMac to 1TB drive run at 800, or will the 160GB drive's limitation of Firewire 400 pull the speed of the whole connection down to 400? (If the latter is true, then it would be a waste of money to get Firewire 800.)
Also, will it make much difference whether I use Firewire 800 or 400 for a drive dedicated to Time Machine?
Finally, the 1TB drive with a 32MB cache costs $20 more than one with a 16MB cache. Is a 32MB cache worth the extra expense for using with Time Machine?
Thanks!
Message was edited by: Patrick Houlihan

Patrick Houlihan wrote:
If I get the Firewire 800 drive and daisy-chain the iMac > new 1TB drive > old 160GB drive, will the iMac to 1TB drive run at 800, or will the 160GB drive's limitation of Firewire 400 pull the speed of the whole connection down to 400? (If the latter is true, then it would be a waste of money to get Firewire 800.)
I believe it will operate the entire bus at the slowest speed, but can't say for sure.
Finally, the 1TB drive with a 32MB cache costs $20 more than one with a 16MB cache. Is a 32MB cache worth the extra expense for using with Time Machine?
I went with the cheaper, smaller cache OWC drives for my backups on the theory that if caches speed repeated access of the same data, and a backup is always a single-pass stream of non-repeating data, then with a backup the data that goes in the cache doesn't need to be fetched again and therefore the cache isn't much help for backups. I'd love to hear if that's true.
I didn't answer the one about FireWire 800 for Time Machine because my Time Machine backups are over the network to Time Capsule. However, having a faster Time Machine drive interface should be faster. FireWire 800 certainly speeds things up for non-Time Machine backup software like SuperDuper which I also use.

Audio Interface for monitoring, mixing 5.1 St Surround in FCP and Sd Tr Pro

I'm a fairly newbie with FCP and Sound Track Pro, and I am doing mostly long form, live event HDV recordings and editing. I'm about to start doing 5.1 Stereo Surround shooting and burning to Blu Ray. What do you recommend for an audio interface for my G4 PowerBook running Leopard w/2GB ram, to monitor/mix my 5.1 audio tracks in Sound Track Pro (since I can't monitor 5.1 in FCP?) I will likely be recording the tracks on the new Sound Devices 788T and inporting them into FCP and/or STP via firewire, but I need to monitor my mix before I burn to Blu Ray discs using Toast 10 and my LaCie BR burner.
Also has anyone found a way to use Bose 5.1 monitor speaker system? It would work fine for the BR player, but what about using with the Mac G4 PowerBook - do I need a digital audio - audio interface?

You'll need an audio-interface with at least 6 outputs. They should be connected to a surround processor or AV-Receiver with multichannel inputs. In line with your budget you could use M-Audio, Focusrite or Apogee products for that, they work with STP & Protools.
When monitoring, you cannot use the Bose system, because S/Pdif is for encoded audio only.

Using M-Audio Fast Track C400 Audio Interface for FaceTime but only input 1 audio is coming through?...

I'm trying to use my M-Audio interface for FaceTime/U Stream for music purposes. I'm a professional recording artist and I'd like to do some "live stream" concerts for fans from home. I have my keyboard in input 1 and my microphone in input 2. Both signals come through just fine when I'm using Garageband or Logic, but for some reason when I select the interface as the "microphone" option when streaming, only audio from input one is heard from my viewers. I've also switched the keyboard and mic to rule out the mic being the problem, but then the mic audio comes through and not the keyboard...I'm wondering if I'm missing some minute setting somewhere?...I don't understand why it's only for video chat applications that it's only receives one channel of audio...Any help would be appreciated, thanks.

Are you using Logic 8 or 9?
What are you trying to hear Logic's output through?
If you're expecting audio output through built-in audio, and you're using Logic 9, make sure your Fast Track is set as the input device, and built-in audio is set for the output device (both in Logic's audio preferences)
However, if you're using Logic 8 or 7, you need to create an aggregate device if you're using built-in output.
Details here:
http://discussions.apple.com/thread.jspa?messageID=8813763&#8813763
OR
use the FastTrack's audio outputs to drive your monitoring, NOT your built-in audio.

Laptop audio interface for Studio work?

I'm looking for a solid (works when you plug it in) 2 channel audio interface for my laptop. (G4, 1.67GHZ, 1gb ram, 7200rpm internal HD, LP 7.01, Tiger)
All I need it for, is to use as an output to play sounds via keyboard from Logic, for a live studio session.(Ivory piano, EVB3, synths, drum programming and etc.)
My laptop wil be used like a sound module so it would be nice to have this interface to have midi ports as well.
It doesn't have to be the best convertors in the world just want them to be clean and as good as you would find in a stock Yamaha or Roland keyboard ($2k -range).
Oh yeah - which is better?: Firewire or USB 2.0

Ooo, that is awesome, except it costs twice as much as the studio monitors! The other solutions I was looking at are in the $150 (Presonus Audiobox USB) to $190 (E-MU 0404 USB) range. I was hoping for something under $100, ideally with balanced audio. Probably too much to ask for!
But I have a question for you... do you get a lag in sync when you go through the FireWire mixer? On a different forum I was reading that if you want sync for video it's better to find an external converter that connects to the optical digital out (TOSLINK, S/PDIF) than one that connects via FireWire or USB as that means a new digital clock master. I would like not to have to worry about adjusting to get sync, but if it's less than a frame I'm not worried about it.

Recommended Audio Interface for MacBook Pro w/ Leopard

There is more to getting a
four pin firewire audio
interface to work than
buying one. Tech forums are
full of driver related issues.
Is there a tried and true
FW audio interface for the
MBP w/Leopard that anyone
is using now? Thanks.

not quite understand.....I m using MAudio firewire 400.....is working quite fine.
And lot of people is using it. With leopard I do not know, any way it should work fine as well.
Good luck

Wanted: Multi-Channel Audio Interface for iMac & GB (USB)

I am looking for an affordable multi-channel audio interface for my iMac for use with Garageband. My goal is to playback old songs from my old computer (Atari ST) through my Yamaha gear and record the audio into GB so I can mix it. (READ: Not interested in transferring MIDI.)
My goal is to get at least 4 and ideally 6 channel/track recording in GB. I’m not sure if the multi-channel units I see, such as the Alesis MultiMix 4 or the Behringer Xenyx Q802USB send all channels to the Mac or if they mix it down to two channels first.
I’d prefer to mix all the channels in GB rather than pre-mix it. Also, I’d prefer to have 1/4” jacks; XLR would be a nice bonus. USB; since Firewire is going away and Thunderbolt is too new.
Any suggestions? I’m trying to keep this under $100. (Also, I know I can use multiple low-budget devices and aggregate them in Audio/Midi, but I do NOT want to go that route.)
Thanks.

As you imply, keeping it below $100 makes it tough.
Generally only the two channel interfaces are close to $100.
Check out Hang Times FAQ:
http://www.bulletsandbones.com/GB/Interfaces.html

Audio interface for iMac????

I just opened the box to my brand new iMac, and to my horror, there is only a Firewire 800 port, and none for 400! I use an M Audio Firewire 410 Audio interface (which I previously used with my now dead Power Mac), and since it connects via firewire 400, I can't use it with my new iMac
So, is there an affordable Fire 800 audio interface? BUT if I do get an audio interface for 800, then I won't be able simultaneously hook up my Glyph drive via the 800 port. In which case, are there any good audio interfaces that connect via USB?

Not sure, but I do think its possible, because last year, when apple introduced some line of Imac, lots of people were having trouble with some specifics soundcard(like RME) cause of the apple choice to use a new type of FW800 port from another companie than Texas instrument. One way some users found to fix the problem was to simply daisy chain the soundcard on the firewire port of an external hardrive. So it should work, but keep in mind that you are gona use some part of the bandwith on your firewire cable to feed your soundcard, and that anyway a FW800 cable cant be as fast as a SATA wire or so. Mean that you may not have as much power as you want with your new HD. If you bought that drive to boost your samplers capacity, it will work only if you install some plugins on your new hardrive and some plugs on your native HD. That way you use both speed at the same time...

Any reccomendations on a Audio Interface for recording?

Hello!
I’m looking to buy a new Audio Interface for under $500. Any recommendations?
Thanks!

I bought a firebox to do some mobile recording, but it had problems and I had to send it back to presonus. in fact I have had 3 other presonus products and every one of them developed problems and I had to send all of them in for repairs. The good thing is Presonus is a great company and they stand behind their products, but in my experience their quality control *****.
once I got the firebox back, I used it for 3 mobile sessions and it worked fine recording 4 tracks. I used it in the studio once as an aggregate device with my motu and the thing glitches about a dozen times during the session, which forced me to constantly restart or re select the driver. right after the session was over I put it on ebay and got rid of it. and I will never buy another presonus product again
take a look at Motu

How can i hold a spot in a clip, let the audio continue for a moment and then resume the clip and audio together?

how can i hold a spot in a clip, let the audio continue for a moment and then resume the clip and audio together?

you want to use the retiming tool. you can select what you want to hold, then use the "Hold" command (shift-H) to create a single frame of a default duration, which you can then change to whatever length you want by dragging the retiming handle.
Here's the page in the help manual that describes the hold feature in detail:
http://help.apple.com/finalcutpro/mac/10.0/#ver4c2173c9

Can I use iphone in BMW via usb interface for phone call and ipod functions

Can I use iphone in BMW via usb interface for phone call and ipod functions

Why don't you check the manual for your car or ask your dealer?

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible?

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible? And if it is how an i doing this?

Hi I Pant,
The idea that crossed my mind was to tie each of the lines coming from/going to "your device" to two of the DIO lines. Configure one these two ports as input, the other as output.
When you want to read the state of the line, read from the line configured as input. Similarly, use the other port when it is time to write.
Provided "your device" uses tri-state drivers/receivers, or can be used in a "wired-OR" configuration, this may work.
What is "your device"?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Thunderbolt Audio interface for garage band

I'I'm new to Mac & garage band. Need advice on audio interface . What's the best way to go??? Thanks!
Syl

well they stopped putting the minipin input on these new imacs. Doesn't that suck?
I went to newegg.com and got this ordered this.
SYBA SY-AUD20091 USB Audio Adapter.
Thanks for your reply.

Need advice on an Audio Interface for guitar, bass and vocals

Similar Messages

Maybe you are looking for