Need advise setting up bootcamp please
Hi
I am new to setting up partitions and bootcamp. Please can you advise me:
1. How do I know how much space I will need? I'm installing MS Money, TurboLister (ebay), Windows, Office. If I setup Bootcamp, can I increase the partition if I decide to install further office applications.
2. If I decide not to use Mac applications, do I need to delete or remove the apps/file which are in that partition?
The reason is that because I rely mostly on WIndows applications for my work, I can considering switching completely over to Windows but still retain using the MacAir. Please can you advise if there may be issues with this eg. tracker mouse on Windows - does that work ok?
Hope this makes sense. Hope you can help.
Thank you.
Windows 7 - allocate 40GB plus what you need for data and applications.
No ability to resize.
Some are happy to use Windows virtually (Fusion, VirtualBox, Parallels).
Create and install Windows on Boot Camp, and then use it as dual-boot and/or in OS X under Mac side by side.
Excel/Office runs better natively in Boot Camp. But running in a VM also taxes the hardware more.
Plan on the largest - then double that. Maybe 50/50.
You can get along with 40GB for Mac side.
Why MacAir if you are going Windows primarily or only?
By the end of the year Apple promises full support on current Macs for Windows 7 - so I would assume trackpad, mouse, networking, BT etc.
Similar Messages
-
Need registry set-up info, please!
I have a licensed copy of CS5 installed, but have lost my original disks. My problem is that when I had to replace my primary hard drive ( NOT the one CS5 was installed to) all the registry information needed by Windows 7, of course, vanished. I need to find out how to properly set up the registries so I can use CS5 again.
Uninstall and reinstall. You can download thru the link below and use youe serial number to activate. Your serial number should be available thru your Adobe account online iof you registered.
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html -
Need help setting up bootcamp on MBP 17"
Hey All,
I should be getting my MBP 17" in a few days and so I'm starting to get things ready to get it all set up.
My intention is to run Vista/Windows 7 as my main OS, so I have a few questions about how to go about doing this.
1. Can I use and OEM version of Vista with Bootcamp?
2. When I partition the HD, (320 Gig), how much should I leave for OSX?
3. Can I access my files in both OSX and Vista (music, photos, work)?
4. Can I set the notebook to boot to Vista as the default?
Basically, I'm new to this so any help you guys could offer would be great. As well, if there is anything I should look out for or be aware of, I would appreciate the heads up.
Thanks!Hi crazylegsmurphy,
Question No.1
Yes you can install the OEM version of windows Vista
Question No.2
Depends which OS you will be using most frequently. If you dont use OSX alot, leave at least 30GB-40GB of space. preferably try to leave more. And vice versa if you are not going to use Vista alot.
Question No.3
Unless you install via VMware or parallels then No you cannot access data simultaneously ( as far as i am concerned ) unless you install this program https://docs.rice.edu/confluence/display/ITTUT/AccessOS+X+partition+from+Windows+in+BootCamp
Question No.4
yes you can make Vista boot as default but i don't know exactly how to see it offhand.
Regards,
Andrew
Message was edited by: iddrew -
When I started up my computer this morning, a warning popped up saying: ! Sync encountered an error while connecting: Unknown error. Please try again.
Why do I need to set up Sync on Firefox when I only use this one computer and do not even have a cell phone?If you do not want to use Firefox Sync any more, you can deactivate it. See instructions here: [[How do I manage my Firefox Sync account?]]
-
I accidentally purchased Adobe Photoshop and Premiere Elements for Windows, but I need it for Mac. Please advise.
Return, cancel, or exchange an Adobe order
-
Need help setting up FCE 4 PLEASE
OK, I'm NOT a professional, just need help setting up.
Just purchased FCE 4. Need to set up my Sony HDR SR11. I've already recorded most of my stuff in HD SP. Can someone Please help me set up?
thanksThanks for the info.
I updated and did a search in my manual for Log and transfer which didn't go to anything I can figure out. Sorry, I don't have time to read 1152 pages.
Can anyone just tell me how to get this going? There should be a simple set up correct? -
I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !
Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/ -
Need help setting up remote access please
I have a new server 2012 network with a server built specifically for remote access
I need to set up simple remote access to LAN pc's, published apps, and to manage domain remotely
this is only a test setup and I want some security but first want teh basics setup then I can lock down
I ran the wizards and believe most things are done correctly when I added the roles, and firewall is allowing access to that server.
when I try to connect from external I get the remote server's default IIS web page, no remote access options
is there a simple checklist to test services internally and test the web page access internally?
I am not sure what information you may need so please ask for any details that will be helpful
Remote Gateway, licensing, web access and certificates have all been configured using the wizards
David Sheetz MCPHi David,
Thank you for posting in Windows Server Forum.
Initially to remote access the application through RD Web we need to use https://servername/rdweb. Also please check the following setting.
In IIS: IIS Sites --> Default --> RDWeb --> Pages --> Application Settings --> DefaultTSGateway:
Set that to your RD Gateway access URL.
Then restart IIS.
Your RemoteApps will then be able to find the proper gateway inbound.
When you created your collection bring up its properties and make sure the URL is specified in RD Gateway settings too. This generates the correct settings in the RDP files.
In addition, please checkthis article for information. Also please see whether you
have configured RD RAP and RD CAP properly and try to uncheck the option “Bypass RD Gateway for local address” under deployment properties and verify the result.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Question: Need advise about new computer (OS Win8.1) to run CS6 - please point me in the right direction Thanks
OSX comes with Xcode. Install it and see what you think. You can write both Java and Objective-C. They both have a particular syntax that is quite different from VB. Try to use them to write a HelloWorld program and see what you think.
Apple has come a long way in integrating Java into their development environment. Still, it was designed around Objective-C, so that might be more of a "pure" MacOS X development experience. -
Please Read This if You Need Help Setting Up Email...
Hi Everyone!
If you are hoping to use your Nokia phone for send and receiving emails you will need to set this up prior to use.
You may find that your phone has already been setup to send and receive emails by your network. This will be for the email address that has been provided to you by your network. If you would like to set up your phone for another email account, like your private or work email account, this will need to be set up by you.
The easiest way to do this is to order the settings from our site. You can do this from this link: Nokia Settings Page Here you can order all the settings you might need, to get your email settings click on Order Advance Settings and choose email when prompted.
Dont worry if you can't see your email provider in that list, if you have Nokia PC Suite installed you can connect your phone to your PC and configure your email account with some software.
If you have a 9500, 9300 or 9300i communicator you can go here: Nokia Configuartion Tool
If you have 3220, 6230i, 8800, 6810, 6820 or 6822 you can go here: Nokia Email Configuration Tool
If you have a series 60 phone like a 6680 or 7610 etc you can install the Settings Wizard from here: Nokia Settings Wizard. This application will attempt to configure your email settings for you. You will need a working installation of PC Suite to install this from your PC. If you are able to get the installation file on to your phone you will be able to install from there.
If your phone has not been listed in any of the above points, then unfortunately you will need to configure the phone manually. If you need to do this you will have to find out some basic information first:
Your incoming server address
Your outgoing server address
Do you require a secure incoming/outgoing connection?
Do you need SSL?
Your email provider will be able to provide all this information, if you get stuck during the setup on what you should be entering for a setting, your email provider will be able to help you out.
Hope this is enough to help some of you out, any comments are welcome - just send me a PM.
Cheers
Karim
EDIT: Updated link to the phonesettings pageMessage Edited by ajak on 20-Aug-2007 04:27 PMRoad Runner is a pain at times to get to work on both Wi-Fi and EDGE. It seems as if their outgoing mail server doesn't like to roam. CWMX is ONLY for use on the cellular network, and if you plan on using Wi-Fi to send e-mails periodically, CWMX will NOT work.
My solution: Sign up for a GMAIL account, and forward your e-mails to the GMAIL account (provided POP access is enabled). Just log-in to this GMAIL account with your iPhone, and you'll get all your e-mails! If you need any help, let me know, I'll be glad to get you some directions. -
I have had 4 mac computers and after years of downloading songs from itunes, I keep recieving a message that I need to set up an account. when I try to make a new account, i get an error that says i already have an account.
Have you tried checking the Store drop-down menu in the iTunes interface to see if you are signed in the existing account?
-
Help Please: Do I need to set Classpath?
Hi friends,
I installed JDK 1.4 on Windows, do I need to set up classpath after installation? How to do it?
What if I install JDK on Linux? How to set the classpath?
This puzzles me a lot, any response will be greatly appreiated!
THANKS!!!Windows: probably not, but if you do it depends on the version of Windows. http://forum.java.sun.com/thread.jsp?forum=54&thread=246067
-
Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
ThanksYou got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars -
Dear Experts,
I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
Thanks,
SMTPIt may be best to recreate the folder and the smart playlists from scratch.
tt2 -
I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!
Maybe you are looking for
-
Pedido de Compra - Envio de e-mail para o fornecedor
Boa tarde pessoal Estou com uma dúvida sobre o processo para envio de e-mail do Pedido de Compra para o fornecedor. Hoje utilizamos o e-mail do último aprovador no Pedido de Compra para que seja enviado ao fornecedor. Existe alguma configuração para
-
I do not want to have to choose these two controls or tools in InDesign each time I open a new page or doc. How can I make them open automatically?
-
HP Color Laserjet CM1312nfi MFP cannot scan
Dear HP support, I use a MacBook and my printer is an HP Color Laserjet CM1312nfi MFP. When doing the HP setup assitant I connect the printer to the MacBook with a USB cable but the assistant does not recognize the printer and I cannot carry on with
-
Hello to eveyone. I'm new to java, and i have downloaded the j2ee 1.4 Beta and j2se.after installing the virtual machine and the sdk i didn't see any kind of IDE. it's normal or we have to adquire and install it seperatly? Sugestions are always welco
-
Trying to converse thru webcams with PC user
I am using a mac IbookG4 laptop- my boyfriend has a dell PC laptop. I have the Isight webcam with microphone built into it. We can't reach a connection to each other, I am using IChat and he is using AIM. We can send invitations to each other, but wh